Digital Commons Network^™

Application Of Desktop Manufacturing System (Sla) For The Manufacturing Of A Centrifugal Pump Impeller Using Cad (I-Deas), Wasimuddin Azam Muhammad Syed

Theses

Desktop Manufacturing (DTM) systems which combine personal computer, laser and other technologies are being used to sculpt objects from computer generated models created on computer aided design (CAD) workstations. As a member of DTM systems, StereoLithography Apparatus (SLA) transforms 3-dimensional designs into a 3-D output. This can substantially reduce the time required to produce a prototype through the process of photopolymerization. The process involves the transfer of a liquid plastic monomer into a solid polymer by exposing it to ultraviolet light.

Although the process looks productive, inefficiencies can occur, if incorrect parameters are selected before its application for a particular …

Domain Analysis Within The Gensif Framework, Heiko Thimm

Theses

The GenSIF framework which is targeted towards very large, distributed, and complex software systems recently has been proposed to accomplish a form of systems engineering and systems development in which the issue of systems integration is considered from the beginning on.

One of the components of GenSIF is domain analysis. Domain analysis leads to the design of a domain model. The specific needs GenSIF has in that area were investigated with an emphasis on domain modeling. Main points addressed in that investigation were the issue regarding the relevant information for the domain modeling process and the required type of domain …

Modeling, Evaluation, And Control Of A Flexible Manufacturing Cell Using Petri Nets, Glenn Arthur Thorniley

Theses

This thesis describes the usefulness of Petri nets in modeling, evaluating, and controlling a Flexible Manufacturing Cell (FMC). The basics of Petri net theory are explained and a specific FMC is examined. First, the FMC is modeled. The purpose of modeling is to facilitate the evaluation and provide a framework on which the control methodologies can be applied. The objective of the evaluation is to determine how the FMC would benefit most by replacing or adding equipment. Several ideas on control are combined to form a useful framework for the designing of the control net. With this framework the control …

Character Recognition Using String Matching, Xiaozhi Ye

Theses

To handle noisy and distorted pattern is the use of similarity or distance measures. A similarity or distance measure can be defined between a representation of an unknown pattern and a representation of a prototype pattern. Recognition of the unknown pattern can be carried out on the basis of the maximum-similarity or minimum distance criterion (Bunke 1990) This approach is proposed to recognize the noisy or distorted character image. In this work, a directly string representation of the pattern ( prototype as well as unknown input) using the histogram method, a decision procedure for classification is the well known Levenshtein …

Design And Implementation Of Two Text Recognition Algorithms, Madhumathi Yendamuri

Theses

This report presents two algorithms for text recognition. One is a neural-based orthogonal vector with pseudo-inverse approach for pattern recognition. A method to generate N orthogonal vectors for an N-neuron network is also presented. This approach converges the input to the corresponding orthogonal vector representing the prototype vector. This approach can restore an image to the original image and thus has error recovery capacility. Also, the concept of sub-networking is applied to this approach to enhance the memory capacity of the neural network. This concept drastically increases the memory capacity of the network and also causes a reduction of the …

Thermal Decomposition Of Dichloromethane In Absence And Presence Of Added Oxygen And/Or Methane, Hong-Ming Chiang

Theses

Thermal decomposition experiments on dichloromethane in absence and presence of added O₂ and/or ₄ and in argon bath gas were conducted in a tubular flow reactor. The thermal reactions were studied at 1 atmosphere pressure with residence times of 0.3 - 2.0 seconds in the temperature range from 680 to 840 °C.

The degradation of dichloromethane and the decomposition product distributions were studied in both oxidative and pyrolytic reaction environments. The slowest decay of dichloromethane occurred when CH₄ was present and 02 was absent. The concentration of all products, (except HCl, CO, and CO₂ in the oxidation), …

Synthesis Of Bisphenol A Bis-2-Hydroxypropylmethacrylate (Bisgma) And Diethylchlorophosphate And 2-Hydroxyethylmethacrylate (Decp-Hema) And Preparation Of Dental Adhesives, Da Xie

Theses

BisGMA and DECP-HEMA were separately synthesized from Bisphenol A and glycidyl methacrylate and from diethylchlorophosphate and 2-hydroxyethyl-methacrylate. The structure of the monomer, BisGMA, was further analyzed by means of chromatography, VPO, IR, FTIR and GC-MASS.

Based on the main monomers, BisGMA, DECP-HEMA and an organosilane compound, a dental adhesive has been formulated. Although the tervile strength of the adhesive has been found to be not as good as the adhesive formulated by a previous worker (student), its applicability to teeth is more suitable for clinic practice.

Automatic Motion Analysis Of Colliding Spheres, John Vijayakumar Caesar

Theses

Motion analysis is useful to compute linear and angular velocities and acceleration of an object from a sequence of images. This thesis is part of an investigation to compute the translation and rotation velocities needed to determine the collision parameters of two colliding spheres. This involves the tracking of the spheres and feature points on the spheres over a time interval. An experimental setup releases two spheres such that they collide and a high speed imaging system, i.e., Kodak Ektapro 1000 is utilised to record the motion of the spheres. The imaging system is capable of recording at a speed …

A Theoretical Study Of The Subband Structures And Tunneling In Polytype Heterostructures, Hong Chen

Theses

A theoretical study of the electronic and optical properties in polytype heterostructures is presented in this thesis.

In the first part of the thesis (Chap. 2 and Chap. 3), an explicit expression for calculating the subband structure and tunneling is formulated by the incorporation of the envelope function approximations and the transfer matrix technique. It is based on the k*p theory as done to date, but contains two significant improvements: a more realistic treatment of the spatial and energetic dependance of effective masses and band edges; the availability of the calculations, in favor of direct numerical evaluation, to various quantum …

Uses And Applications Of Artificial Intelligence In Manufacturing, Manojkumar H. Desai

Theses

The purpose of the THESIS is to provide engineers and personnels with a overview of the concepts that underline Artificial Intelligence and Expert Systems. Artificial Intelligence is concerned with the developments of theories and techniques required to provide a computational engine with the abilities to perceive, think and act, in an intelligent manner in a complex environment.

Expert system is branch of Artificial Intelligence where the methods of reasoning emulate those of human experts. Artificial Intelligence derives it's power from its ability to represent complex forms of knowledge, some of it common sense, heuristic and symbolic, and the ability to …

Cost Deployment Based On Quality Function Deployment, John Goceljak

Theses

A methodology for Cost Deployment based on Quality Function Deployment (QFD) architecture is developed and explained. Following a comprehensive review of Quality Function Deployment terminology and composition, a house-of-quality is developed, and matrix correlation methodologies are discussed. Current applications are presented to illustrate the scope and adaptability of this quality assurance tool. In addition, an exercise in product design and review is conducted to illustrate a unique approach to cost deployment. Quality Function Deployment issues, including software, consulting, and preferred practices are also presented.

Shop Floor Planning And Control In Integrated Manufacturing Systems, Tahir Mahmood

Theses

The implementation of a shop floor planning and control system is a prerequisite in establishing an effective computer integrated manufacturing system. A shop floor control system integrates management production goals with the capabilities and limitations of the manufacturing plant. Shop floor planning begins with a long term rough cut capacity plan and evolves into near term, capacity requirements and input/output plans. Shop floor control provides a status of in-process operations and a measure of the plants success in executing the plan. Effective use of technology on shop floor increases the efficiency of the manufacturing plant. Simulation is an important tools …

Posterior Stabilized Knee Design Biomechanical Considerations, Donald E. Mcnulty

Theses

Numerous posterior stabilized knee systems are available for primary and revision total knee arthroplasty. Design of these systems requires an understanding of the articulating geometries and kinematic/kinetic biomechanical considerations of the normal knee. The findings for the normal knee are integrated into the design of a prosthetic system.

The natural femoral, tibial and patella articulating geometries are defined to enable subsequent kinematic and kinetic analyses. The articulating geometries are characterized from review of anthropometric studies of the tibiofemoral and patellofemoral joint.

The kinematic analysis of the natural knee defines knee motion in terms of rotation, adduction/abduction, range of motion and …

A Study Of Annular Slurry Jet For Abrasive Waterjet Cutting, Thomas Kuriakose

Theses

The objective of this project is to study the performance of an annualr slurry jet nozzle for abrasive waterjet cutting. This nozzle has been invented by Avraham. Harnoy, Department of Mechanical Engineering, NJIT and presented to the patent committee of NJIT in May 1990. This study includes design and development of prototyes and testing of their performance. Moreover, it includes initial theoretical study of the flow behavior.

The idea is based on the merging of a high velocity pure waterjet with an annular jet of a slurry of water and abrasives at low velocity. The two jets merge outside the …

Design For Productivity Using Gd&T, Srihari G. Acharya

Theses

No abstract provided.

Quantitative Measurement Of Pyrolysis And Combustion Species Concentration By Molecular-Beam-Sampling-Mass-Spectrometry, Xian Zhong

Theses

A molecular-beam-sampling apparatus utilizing both a time-of-flight mass spectrometer with vacuum ultraviolet (VUV) photoionization and a quadrupole mass spectrometer with electron impact ionization is described. These systems are used to analyze reactants and products, as well as reactive intermediates, from flow tube experiments at reduced pressures and elevated temperatures. It is shown that the quadrupole signal sensitivity can be predicted using literature cross sections which are based upon the atom hybridization within the various molecules. Measurements of the VUV photoionization sensitivity for stable species led to development of a group additivity approach to predict cross sections. This approach was extended …

Errors In Constant-Velocity Shaft Couplings, Philip M. Remington

Theses

A Multiloop spatial system of rotations is used to represent a shaft coupling, allowing a transmission plane which may deviate from the plane of symmetry to be specified. The plane of transmission, for intersecting input and output shaft axes, is the locus of intersections of screw axes that compose the system. By prescribing the transmission plane outside of the plane of symmetry (commonly called the "homokinetic plane" or "bisecting plane") to pecified orientations, a phase shift between the input and output shaft rotational displacements will he quantified. The rotational phase shift between the input and output shafts can be evaluated …

Automatic Surface Mount Solder Joints Inspection, Zhu Liu

Theses

This thesis reports the research results on automatic inspection of solder joints on printed circuit boards. The previous work on this subject has been advanced significantly in the following three aspects. With the support of AT&T Bell Lab, the most updated surface mount solder joints are inspected in this work instead of larger simulation solder joints or traditional through hole solder joints in the previous work. A small set of features is extracted for surface mount solder joints in both infrared and visual light inspection. A new image processing software named Khoros has been applied to improve the quality of …

The Durability Of Hot Mix Asphalt With Petroleum Contaminated Soils, Bonnie H. Dubose

Theses

Petroleum contaminated soils are considered solid waste They must be taken to solid waste facilities such as landfills or some other method must be found to deal with them. Landfills are becoming limited and is looked upon by the government as the least attractive option. One method that looks promising is to use petroleum contaminated soils in Hot Mix Asphalt Concrete.

In the research program the following are examined: 1) Investigation of material properties of the petroleum contaminated soil and aggregates 2) The proper procedure to produce a design blend of asphalt concrete. 3) Establishing the test procedure protocol to …

User Interface And Data Structure Design For Architectural Expert System, Yonghua Ma

Theses

Computers are currently used to generate drawings in the architectural design process. This thesis anticipates the development of an Architectural Expert System, which could provide assistance in the decision-making processes in architectural design. The focus is on the design of the user interface of such a system. Architectural object-oriented data hierarchies are created. Also, a set of drawing tools, which assist the user in the creation of architectural objects such as walls, windows, and doors, are provided.

Sgml-Based Publishing, Erinne G. Cheney

Theses

None provided.

A Computer Program For The Extraction Of Bipolar Transistor Spice Models, Larry Duane Delaney

Theses

Each year semiconductor manufacturers spend millions of dollars in the development of new products. It can be very costly to create on silicon a newly developed circuit, especially if it is not very manufacturable or poorly designed. To eliminate risk it is of utmost importance that circuit simulation be done correctly in the early stages of development. Simulation can only be as good as the model being used. Almost all designers whether digital, analogue, or mixed mode use SPICE to simulate their circuits. SPICE accuracy is inherently dependent on the discrete element models being used, i.e. transistors, diodes, mosfets. Development …

Applications Of Fourier-Based Features For Classification Of Synthetic Aperture Radar Imagery, David G. Ehrhard

Theses

A method for segmenting synthetic aperture radar (SAR) images has been developed to operate primarily in the frequency domain. It is based on and was tested against a similar method which involves isolating information of the frequency-domain image that defines unique textural features within a class. The comparison involved classifying four simple vegetation SAR scenes with both segmentation methods. A statistical test was then performed against the null hypothesis that the new textural segmentation method is as accurate or more accurate than the original method based on random pixel classification results. All tests concluded that the texture extraction methods are …

A Field Emission Transistor Array For Writing Applications, Todd C. Sieger

Theses

This work involved the development of a unique imaging device utilizing vacuum microelectronic field emitter tip arrays (FEAs) and CCDs. The device offers the potential for higher resolution than any other write head technology (such as LED and laser etc.) currently used in Xerographic copiers and computer printers. In addition, the possibility of true-color output exists. A discussion of the CCD Emitter's applications and advantages over existing devices will be presented. As part of the development of the device, layouts for a 10-pixel linear array device and other test structures were created as part of a CCD/FEA test chip. The …

Modification, Reimplementation And Studies Using The Meisner Model Of The Heart, Ari Zvi Zivotofsky

Theses

The study of left ventricular filling in both the normal and the pathological heart is of great importance. A computer model simulation of the heart with emphasis on mitral flow was designed by Meisner in 1986 and implemented in QuickBASIC. This paper discusses how the original program was altered to be able to perform "Parameter vs. Parameter" runs in which it can be observed how varying an input parameter affects output parameters. The output data is then formatted in such a way that it can be used by QUATTRO PRO, a standard spreadsheet package, to yield graphical outputs.

In addition, …

Blood Pressure Monitoring System, Fa-Liang Wang

Theses

In order to control disease and survive, humans have been struggling thousands of years with the expenditure of human energy and money. We retain the heritage of our ancestors' medical knowledge, and develop our accumulated medical technology for ourselves and our offspring. Human are still seeking convenient, continuous and accurate methods for obtaining data that can be read directly from our body in order to control disease. Some of these methods are: taking urine to identify many diseases , sampling serum to check for plasma glucose, and applying a sensor to measure blood pressure and pulse rate.

Computers In College Art And Design Programs, Marla Jo Keating

Theses

None provided.

Electronic Properties Of Sensitizer Centers, Dan Zhang

Theses

This investigation expands on previous photographic studies of the sensitivity of sulfur and sulfur-plus-gold sensitized octahedral AgBr emulsions to long wavelength light. The experimental atmosphere was controlled by a variable temperature vacuum sensitometer which reduced the oxygen and moisture content of emulsion coatings and thereby improved the efficiency of long wavelength sensitivity. The relative sensitivity at long wavelengths was determined as a function of wavelength, sensitizer level, and sensitizer type. The activation energy actually measures the energy for a hole release from an excited sensitizer center and not for an electron release as earlier work has claimed. By correlating the …

Characterization Of Dichroism And Linear Polarization Effects On Colorimetric Properties Of Plastic Transmitting Materials, Richard W. Riffel

Theses

Polarization is not a new phenomenon. However, in some applications polarization can be a contributing factor to colorimetric mismatch between samples When investigating polarization effects, most work has centered on the application of circular polarization on absorption spectroscopy in organic molecules. However, little if any colorimetric research on plastic materials has been done. Given the fact that linear polarization is a naturally occurring phenomenon, the dichroic effect is further highlighted in some end-user applications. The current research defines a technique for characterizing the linear-polarization-induced dichroic effect in a transmitting plastics application. Included in the work is the description of a …

Eco Battery Exchange System, Rit Kasetsuwan

Theses

None provided.