Digital Commons Network^™

Audit Techniques For Data Processing Systems; An 8 Quarter Credit Hour Research Option, William Perry

Theses

None provided.

Documented Techniques In The Creation Of Flatware, Norman Evans

Theses

Not Included

An Investigation Leading To The Production Of A Nonlift Tea Service, David Vukelich

Theses

Not Included

Environmental Design, Rand Schuster

Theses

None provided.

Analysis Of Decomposition Gases And Leach Water From Controlled Sanitary Landfill, Robert Gargano

Theses

A sanitary landfill was simulated by placing "refuse" between two layers of soil in 6" by 24" cylinders. Canine nutriment was used to simulate the refuse. Once the refuse began to decompose, the decomposition gases were collected in a gas cell and analyzed in an Infrared Spectrophotometer. When gas samples were not taken, the decomposition gases were vented through a water trap (to prevent air from backing up into the system) into the atmosphere. Distilled water was added and withdrawn at two week intervals to leach out the pollutants.

From the Infrared analysis, the decomposition gases were determined to be …

Computer Simulation Of A Linde "Double Column", John A. Bazan

Theses

The purpose of this thesis is to develop a Fortran Computer Program to simulate the operation of a Linde "Double Column" for the separation of air into oxygen and nitrogen. The model outputs the number of contact stages required, the reflux ratio, the heat loads (condenser and reboiler, and the five profiles of temperature, pressure, vapor flow rate, liquid flow rate, and light component composition. From this data, the proposed design can be evaluated, and the effect of varying operating conditions explored.

A Method Of Schlieren Alignment Stabilization Using Automatic Feedback Control, W. Lawton King

Theses

An investigation of the application of feedback control to schlieren system alignment stabilization is presented. A feedback control system was designed with the necessary sensors and actuator to maintain the knife edge alignment of a schlieren system. The feedback control system's performance when subjected to controlled disturbances was evaluated. The results indicated that the approach is feasible.

An Investigation Of The Mechanism Of Emulsion Stabilization By 4-Hydroxy-6-Methyl-1,3,3a,7-Tetraazaindene, Eddie Rising

Theses

There is considerable speculation in literature as to the mechanism of photographic emulsion stabilization by 4-hydroxy-6-methyl-1,3,3a,7-tetraazaindene, (Aza). Aza is important as a stabilizer because, unlike the heterocyclic mercaptans, it causes no desensitization when the emulsion is processed in the commonly used MQ developing agents. The mercaptans are strongly adsorbed, whereas Aza is weakly adsorbed on silver halide. Therefore, there has been speculation that the stabilization mechanism of Aza is distinctly different from that of the mercaptans. For this work, Aza was tested as an antifogging agent and development restrainer along with KBr, as a reference, in two developers which function …

A Study Of The Influence Of Iodide Released During Development On The Course Of Development, Barry Britton

Theses

The Influence of iodide released during development on the course of development was Investigated by transferring known amounts of iodide to Kodak Panatomic X Film and Eastman Fine Grain Release Positive Film (Cine Positive) after exposure and before development. Iodide was transferred to the films being tested by soaking dry Bimat web material in potassium iodide solutions and contacting this to the film for fifteen minutes. The transfer of iodide in the Bimat to the film being tested was found to be essentially complete. The iodide reacted with the grains to convert silver bromide to silver iodide. The silver iodide …

The Effect Of Chromatic Aberration In Process Lenses On The Copying Of Reflection Halftone Dots, Burdette A. Saunders

Theses

A method for evaluation of copydot quality is determined. This method is applied to the problem of determining the relative copydot quality of two films of different spectral sensitivities, while using two process lenses with measureable amounts of chromatic aberration.

The Reaction Of P-Nitrophenyl Acetate With Lysine Hydrochloride And Poly-1-Lysine Hydrobromide, Emmanuel Plange Matteer

Theses

The reactions of p-nitrophenylacetate with L-lysine hydrochloride and poly-L-lysine hydrobromide as a function of pH were investigated.

The results indicate that both compounds react with the substrate in the pH range 7.0-10.0 with an apparent optimum pH in the region near 9.65.

Poly-L-lysine reacts more rapidly over the entire pH range investigated than does L-lysine.

A Study Of The Optimization Of Ethylene Production In A Tubular Reactor, Richard W. J. Robertson

Theses

The pyrolysis of ethane is a complex reaction involving six individual reactions in a reactant mixture of thirteen components. It is further complicated by the deposition of carbon along the reactor walls. The carbon buildup eventually necessitates reactor shutdown, During the intermediate stages the reactor experiences a gradual increase in inlet pressure which affects the reaction conditions, Optimum temperature profiles exist because the yield goes up with increasing temperature, but, consequently, the reactor must be shut down and cleaned out with increasing frequency. The combined effect causes the yearly production of ethylene to go through an optimum.

To find this …

A Handbook Of Intaglio Techniques, David Dickinson

Theses

None provided.

Treatise On Chasing And Repoussé, Genie Goldberger

Theses

Not Included

Calibration Of A Photometric Standard For Hard Dot Area Measurement, Steven K. Misar

Theses

Discussed are the specifications for a Photometric Standard of Hard Dot Area. Mathematical approximations have determined the desired pattern and frequency to be; cross hatch and 100 lines/in. respectively. When measuring the Photometric Standard, deviation from the actual area is attributed to micromotion in the aperture and diffraction in the Densichron 3885d (Sargent - Welch Scientific Co.). The desired specifications in the Photometric Standard allow precise measurements of ± 5% area. A Hard Dot Area Meter was designed and constructed, which simulates a photometric method that theoretically eliminates deviation from the actual area measured. It was statistically tested against microscopic …

Plastics In Art, Patricia Hincks

Theses

None provided.

Liberated Paintings, Susan Russo

Theses

None provided.

Coffee, Chocolate, And Liqueur Sets, Carolyn Law

Theses

Not Included

Graphic Image And Ceramic Form, Sandra Butler

Theses

Not Included

Surface Enhancement Of Handbuilt Forms, Sara Rubin

Theses

Not Included

Wood Firing, Robert Woo

Theses

Not Included

Research And Exploration Of Stone Settings, Jonathan O. Parry

Theses

Not included.

Personalized Glazes For My Work, Robert Black

Theses

Not Included

The Carousel: An Exploration Of Etching And Drypoint Techniques Through Integration Of Organic And Mechanical Symbols, Paul Porter

Theses

None provided.

A Study Of The Effect Of A Dielectric Field On The Solvolysis Rate Of Tert-Butyl Bromide In A Recycle Reactor, Rolf L. Ball

Theses

Previous experiments at Newark College of Engineering have shown that a dielectric field can effect the rate of a chemical reaction. A theory was developed in this thesis to postulate how a dielectric field can increase the rate of a first order reaction whose rate determining step is an ionization. An experimental procedure was developed to measure the reaction rate constant of a tertiary alkyl halide with a solvent to test this theory. The solvolysis of tortbutyl bromide in aqueous ethanol (80%), aqueous dioxane (75%) and aqueous acetone (75%) solvent systems were the reactions selected for study. A total of …

The Development Of Langmuir's Adsorption Isotherms For Glucose And Fructose And The Separation Via Continuous Parametric Pumping, Jafir Abbas Jaferi

Theses

The adsorption equilibria and adsorption rates of fructose and of glucose on aqueous suspensions of fullers earth were determined at various temperatures. The Langmuir adsorption equations were fitted to the equilibrium data and the Langmuir constants were determined so that isotherms could be developed for any pair of parametric pumping operating temperatures.

This glucose+fructose+water system was then subjected to continuous thermal parametric pumping for the separation of glucose and fructose. The operating conditions required for the separation were determined from the experimental adsorption rates and equilibrium isotherms. Samples taken from the continuous top and bottom streams were analyzed by polarimetry …

Equilibrium Calculations Via The Benedict-Webb-Rubin Equation Of State, Steven L. Sincoff

Theses

The performance of various vapor-liquid equilibrium calculations requires phase equilibrium data. One of the most versatile sources of this data is an equation of state, re-lating the pressure, temperature, and phase compositions it a single expression. The equation under study herewith is the eight constant Benedict-Webb-Rubin Equation of State.

This paper provides a computer program which evaluates the following types of phase equilibria: bubble-points, dew-points, and two phase flash calculations. Also included in this paper is the theoretical backround of the Benedict-Webb-Rubin Equation of State, calculational techniques, and the data used in the program.

Flow Behavior Of Molten Polymer Blends, Kryspin Pawel Maciejewski

Theses

An experimental study of molten polymer blends was made using the Instron Capillary Rheometer. The materials investigated were two phase blends of non-crystalline polymers (poIymethylmethacrystate-low Mw-polyvinylacetate, polyvinylacetate-polystyrene, polymethylmethacrylate-low Mw-polystyrene, polymethylmethacrylate-high Mw-polystyrene), crystalline polymers (polyethylene-polypropylene) and combinations of non-crystalline-crystalline polymers (polyethylene-polystyrene). Two methods of sample preparation were used, blending of a polymer pair in a molten state by the use of Brabender blender, and a simple manual blending of pellets in desired proportion. The Brabender blended polymer pairs show lower viscosities, this is interpreted molecularly as a result of a reduction of the amount of chain entanglement on shearing of the …

Pulse-Width-Modulation Control For Second Order Plants Via A Quadratic Criterion, Charles Gebo

Theses

This paper presents a mathematical study of the control of a second order plant having real distinct roots by use of pulse -width-modulation. An integrator connected between the pulse-width-modulator and the plant is a fixed element of the control loop. The integral-square error is used as the Index of performance. The ISE is minimized with the constraint that the pulse modulator is limited to a maximum of one output reversal for a step change in input. Derivation of the equation which will predict the exact switching time of the modulator output to minimize the performance index for any step amplitude …

Treatise On Combined Metalworking Techniques: Forged Elements And Chased Raised Shapes, Bonnie Gallagher

Theses

Not listed.