Digital Commons Network^™

Diversity Techniques For Signal-Strength Based Indoor Location Determination, Anil Ramachandran

Masters Theses

"Diversity techniques have been found in the literature to be suitable for compensating channel uncertainties such as multipath fading. In this thesis, we exploit spatial and frequency diversity techniques for improving accuracy in locating stationary and mobile objects in the indoor environment"--Abstract, page iv.

Performance Improvements Of Automobile Communication Protocols In Electromagnetic Interference Environments, Fei Ren

Masters Theses

"Electromagnetic Interference (EMI) is frequently encountered in automobile communication systems due to a large number of inductive nodes used in these systems. This thesis investigates the effects of EMI on two types of automobile communication systems, the Controller Area Network (CAN) and the FlexRay. It also proposes a modified Automatic Repeat reQuest (ARQ) scheme to improve the communication performances in EMI environments"--Abstract, page iii.

Properties Of Alkaline-Resistant Calcium-Iron-Phosphate Glasses, Jiawanjun Shi

Masters Theses

"The physical properties and alkaline corrosion resistant properties of calcium-iron-phosphate glasses were studied. The addition of Fe₂O₃ decreases the thermal expansion coefficient and increases the glass fiber's Young's modulus in comparison with the addition of CaO. Bulk glass dissolution behavior in alkaline Lawrence solution was studied by weight loss experiments, Raman spectroscopy, and analytical scanning electron microscopy. The corrosion of glass powder in NaOH solution was studied by X-ray diffraction, infrared spectroscopy and high pressure liquid chromatography. The results show that the dissolution rate decreases when the phosphate chain length decreases. Calcium oxide can improve the glass durability in high …

Robust Mechanism Synthesis With Random And Interval Variables, Pavan Kumar Venigella

Masters Theses

"Robust mechanism synthesis ensures that the performance of a mechanism is not sensitive to uncertainties in the mechanism and its environment. The uncertainties include the dimension variations, installation errors, random input motion, and various external forces. Robust mechanism synthesis is used to minimize the impact of these uncertainties on the mechanism performance. Robust mechanism synthesis has been performed by either a probabilistic approach or a worst case approach. The former approach describes uncertain parameters as random variables while the latter approach treats uncertain parameters as interval variables. In this work, methods are developed for robustness assessment and robust mechanism synthesis …

Synthesis, Characterization And Application Of Pd-Pt Bimetallic Nanoparticles And Carbon Nanotubes Supported Nanocomposites, Guoqiang Ren

Masters Theses

"A study on the synthesis of Pd-Pt alloy nanoparticles and composition evolution of the alloys was reported. The synthesis followed a hot organometallic route, with Pd and Pt acetylacetonate as the metal precursors and trioctylphosphine as the solvent. The size of the Pd-Pt nanoparticles narrowed down with time and reached a final size of 3.5 nm in about 10 min. The alloy compositions evolved with time and reached the preset Pd to Pt ratio of precursors in 120 min. An atomic exchange process between the Pt-TOP complex and the Pd atoms at the nanoparticle surface was proposed to elucidate this …

Analysis Of Soil Erosion Based On Soil Properties, Preetha Veeraraghavan

Masters Theses

"The objectives of this research were to identify the major soil parameter(s) that affect the erosion rate of soil and to estimate the erosion rate based on those soil parameters. Both prepared samples and natural samples were used in this research. The soil properties analyzed were the water content, unit weight, Atterberg limits, and soil cohesion. The erosion rate was determined using a rectangular flume and a linear relation between the erosion rate and shear stress was established from the flume experiment. The slope of the linear relation was a good indicator of the soil's erosion rate. The erosion rate …

Towards A Methodology For Integrated Freeform Manufacturing Systems Development With A Control Systems Emphasis, Jacquelyn K. Stroble

Masters Theses

"A variety of fully integrated Freeform Fabrication (FFF) systems have been developed, a selected group for research and several for commercialization. The design methodology behind most of them is not documented, standardized, or rational. It is important to understand that the final product from any integrated system is affected not only by the unit manufacturing processes themselves, but also by the extent the individual units are assimilated into an integrated process. Thus, a scheme consisting of eight steps and the salient five elements necessary to create or retrofit an existing system to achieve an Integrated Freeform Manufacturing System (FFMS) is …

Reinforcement-Learning Based Output-Feedback Controller For Nonlinear Discrete-Time System With Application To Spark Ignition Engines Operating Lean And Egr, Peter Shih

Masters Theses

"A spark ignition (SI) engine can be described by non-strict feedback nonlinear discrete-time system with the output dependent upon on the states in a nonlinear manner. The controller developed in this thesis utilizes the inherent universal approximation property of neural networks (NN) to simplify the design process and solve the non-causality problem inherent with traditional designs. It also exploits a long-term performance index called the strategic utility function to minimize and assist in updating of the NN weights; therefore, an optimal controller can be realized. Finally, through Lyapunov equations, the controller guarantees stability"--Abstract, page iv.

A Guide To The Establishment Of A University Satellite Program, Abbie Marie Stewart

Masters Theses

"The UMR SAT team was formed at the University of Missouri-Rolla to design and build microsatellites. The team competed against ten other universities in the Nanosat 4 competition hosted by the Air Force Office of Scientific Research, the Air Force Research Laboratory, and the American Institute of Aeronautics and Astronautics. This document, written by the Chief Engineer, is a description of the process used by the UMR SAT team to develop a successful satellite program. Included in the document are methods based on systems engineering for developing a mission, a discussion of team organization and recruitment, and lessons learned during …

Terahertz Data Processing For Standoff Detection Of Improvised Explosive Devices, Amit Bipin Shah

Masters Theses

"Improvised Explosive Devices (IEDs) are homemade, non-conventional explosive devices, which are used to destruct and incapacitate individuals and property. IEDs are becoming a popular weapon of attack among terrorists and insurgents due to their easy of making and capability to cause major damage. Hence, is has become necessary to develop efficient systems for detecting and disarming these devices. The Terahertz technology which uses electromagnetic radiations between 0.3 THz to 10 THz for imaging is one of the most recently developed detection techniques and is ideally suitable for detection of IEDs and similar devices. Although a lot of work has been …

Compressor Valve Failure Detection And Prognostics, Raghuram Puthali Ramesh

Masters Theses

"Reciprocating compressors are commonly used machinery for industrial applications. Unscheduled downtime and maintenance activity on the compressors causes considerable loss in throughput and efficiency of a plant. Of all the failures that cause unscheduled downtime in reciprocating compressors, valve related causes are predominant. Most of the failures associated with the valves are tracked to the failure of moving elements within the valve. Achieving higher reliability of critical reciprocating systems requires continuously monitoring the system and performing dynamic analysis of the sensory data for valve fault diagnosis. Continuous monitoring will improve the time and cost to repair through keeping a constant …

Impact Of Ammonia On The Leaching Characteristics Of Mercury From Coal Fly Ash, Harmanjit Mallhi

Masters Theses

"Approximately half of the electricity produced in the United States is generated by coal-fired power plants. Coal combustion products (CCPs) such as fly ash, bottom ash, flue gas desulphurization (FGD) material, boiler slag are either disposed in landfills or impoundments, or beneficially used...It has been long known that fly ash contains many trace elements (As, Se, Hg Cr, Cd, Ni, Pb, Cu,Co, etc.) that can be of environmental concern. Mercury is of special interest since it is a known carcinogen and has the ability to bio-accumulate. The primary objectives of thesis research were to understand the leaching behavior of mercury …

Selective Laser Sintering Of Stearic Acid-Coated Alumina Ceramic, Jason J. Nolte

Masters Theses

"The purpose of this research is to develop a process that will enable a Selective Laser Sintering (SLS) machine to create geometrically complex green parts of various sizes that become strong, dense ceramic parts after sintering. This will be applicable to SLS systems already operational in industry, and may offer a more cost-effective, more time-efficient method for producing high-temperature ceramic rapid prototype parts. Alumina was the chosen ceramic for the developmental stage of this research. Fine alumina powder (average particle size of 0.4 µm) was coated with stearic acid, which served as a binder. Green parts were made from this …

Bio Inspired Techniques For Simultaneous Design Of Multiple Optimal Power System Stabilizers, Tridib Kumar Das

Masters Theses

"Bio-inspired techniques are fields of study that are inspired from topics of connectionism, social behavior and emergence. Researchers have ventured into the intricacies involved with the techniques and devised algorithms based on their study. Such techniques are the focus of this thesis. The two bio-inspired techniques used for simultaneous design of power system stabilizers (PSSs) in this study are - Particle Swam Optimization (PSO) and Bacteria Foraging Algorithm (BFA). The work in this thesis is presented in three papers as follows: Paper 1 -This paper introduces an improved PSO called Small Population based PSO (SPPSO) with less number of particles …

Applications Of Solar Energy To Power Stand-Alone Area And Street Lighting, Joshua David Bollinger

Masters Theses

"A stand-alone solar-powered street or area lighting system is designed and operated completely independent of the power grid. The equipment and maintenance costs associated with a stand-alone solar-powered system are compared with the cost of using electricity to run grid connected street lights. The project focused on the viability of using solar energy to power the lights in the area surrounding St. Louis, Missouri. The results had to be consistent to warrant converting new areas to independent solar powered lighting. A prototype system is constructed from equipment available on the market for the purpose of gathering data on different lighting …

Detection Of Flash In Dermoscopy Skin Lesion Images, Radhika Nagane

Masters Theses

"Dermoscopy images of skin lesions are often acquired by covering the skin with mineral oil, alcohol, another liquid or a gel and illuminating the area at a low angle of incidence from all directions before taking the photograph. Deeper pigment patterns are more visible in this type of image than in a clinical image because the liquid immersion and structured light effectively make the upper layers of the skin more transparent. Flash regions are the small, high reflectance areas in the image where direct reflections of the illumination source(s) cause undesirable bright spots in the image. These flash regions may …

Dancing Through Film Musicals: Narratives In Motion, Dara Phillips

Masters Theses

The purpose of this study was to discover if and how dance communicates vital plot and character information nonverbally. The example analyzed was the film Singin’ in the Rain. This thesis examined the six dance sequences in the film to determine if the dancing is an integral, powerful, and significant communicative addition to the film. Walter Fisher’s Narrative Paradigm was used in conjunction with Seymour Chatman’s concept of kernels and satellites to determine if the dances communicated significantly to the film’s viewers. The Narrative Paradigm, though loosely framed, provided the concepts of coherence and fidelity. These concepts helped determine if …

Metabolic And Phenotypic Characterization Of Aerobic Pcb Degrading Bacteria Isolated From Kalamazoo River Sediments, Brenton K. Lehmkuhl

Masters Theses

The Kalamazoo River is contaminated with polychlorinated biphenyls (PCBs) which are neurotoxins and suspected carcinogens. The goal of this study was to isolate, identify, and metabolically characterize PCB degrading strains of aerobic bacteria. Biphenyl enrichments resulted in the isolation of putative PCB degrading strains from different locations along the river. Based on 16S rRNA gene analysis the isolated strains were identified as belonging to the genera of Achromobacter, Acidovorax, Cellulosimicrobium, Paenibacillus, Pseudomonas, and Rhodococcus. These strains were screened for their PCB degrading ability and congener specificity. All of the isolated strains degraded PCBs via the 2,3-dioxygenase pathway. The range …

Enhanced Print Performance Of Water-Based Rotogravure Inks Through Rheological Balance, Rurou Mai

Masters Theses

Water-based inks have been of more and more interest to the printing and ink industry. Compared with solvent-based inks, water-based inks have more complex formulations because of their higher surface tensions, lower drying speed, foaming problems, pH balance, and different rheological properties. This work explores the significant effects of various rheology modifiers, including non-associative and associative thickeners, on the rheological properties of a water-based rotogravure ink system. Particular emphasis is given to thickening efficiency, pH stability, particle size, system compatibility, temperature stability, and printability on vinyl substrates. Wire-wound lab rods and a Moser Sheet-fed Gravure Proofing Press were employed to …

Effects Of Live Music On Pain, Mood, And Exercise Adherence With Rehabilitation Patients, Victoria Storm

Masters Theses

Incorporating music into treatment protocols is a non-pharmacological approach to pain management. Music can aid in mood and motivation, and assists in coordination of movement through rhythmic entrainment. Few studies have looked at the effectiveness of music on pain and mood while actively engaged in exercise. In this study, patients in an inpatient physical rehabilitation facility were provided with rhythmically synchronized music during upper extremities exercises. Self-reported ratings (McGill Pain Questionnaire - Short Form and Feeling Scale) of pain and mood were taken through a pretest post-test between subjects group design. Rate of Perceived Exertion (Borg's RPE) was taken post-test …

Computer Model To Select Leed Certification For Building Projects, Ruba Mirghani Mohammed

Masters Theses

According to the US Green Building Council (USGBC) residential and commercial buildings in the United State consume huge amounts of natural resources; pollute the environment, and generate large amounts of waste, all of which affect the environment, economy, public health, and productivity. As a result, USGBC committees developed the Leadership in Energy and Environmental Design (LEED) rating system to help professionals improve the quality of buildings and lessen their impact on the environment.

The (LEED) Green Building Rating System is a point-based system for certifying the level of a building's sustainability. There are four LEED certification categories: (1) Certified, (2) …

Thermodynamics Of Metals Adsorption Onto Uranium Dioxide, Koi Ling Lim

Masters Theses

Wastes and pollution containing uranium are released to the environment through mining, ore processing, industrial manufacture of nuclear fuel and weapons materials, and the disposal of spent nuclear fuel. There are a wide variety of processes that can affect UO₂ stability. This research focuses on the surface reactivity of UO₂ in reducing aqueous solutions, with an emphasis on assessment of the pH-dependent surface charge, reactive surface area, and the adsorption of dissolved lead (Pb), cadmium (Cd), lanthanum (La) onto UO₂ particles. A surface complexation model was used to explain the adsorption and titration phenomena of UO_{2 …}

Resilience And Depressive Symptoms In Midlife Women, Keverne L. Lehman

Masters Theses

Rates of depression are increasing throughout the world, with women experiencing depression twice as often as men. This study utilized the Neuman Systems Model to examine the relationship in midlife women between depressive symptoms and resilience. Women ages 35-55, selected from four health care settings, completed written surveys on demographic information, life events, depression, and resilience. Results supported depressive symptoms as a health concern for mid-life women: 32% reporting current or previous treatment for depression, and 24% screening positive for depression. Resilience, measured by the Polk Resilience Patterns Scale, was related to education, perceived health, conflict in the living situation, …

Caustic Treatment Of The Pulp: Caustic Recovery By Reverse Osmosis, Miroslav Suchy

Masters Theses

The benefit of caustic treatment on changing cellulose properties has long been known. When the treated pulp is later intended for use in personal or in health care product industries, it is important that all residual chemicals are removed and that the pure cellulose or carbohydrate portion of the pulp remains. The removal is usually facilitated by washing. Due to the low caustic concentration in the washing filtrates the removal of the excess water by standard techniques such as evaporation would not be economical.

The main objective of this investigation was to evaluate the concept of using reverse osmosis for …

"Who Will Cry For The Little Boy?:" An Autoethnographical Analysis Of The Lived Experiences Of An Adopted Person, Timothy R. Terrentine

Masters Theses

What becomes of the little boy who knows well abandonment and pain, yet simultaneously discovers predestinated purpose and unconditional love? This autoethnographical analysis examines the life of an adopted person who has spent his developmental years dealing with specific tensions associated with adoption and all that lie within. Using relational dialectics (Baxter, 1993,2004; Baxter & Montgomery, 1998) and existing adoption research (Carp, 2003; Herman, 2003), the author weaves his story of a history of tensions, a presence of negotiated relationships, and a future of hope with emerging tensions. Through a specific process of discovery and analysis; existing as well as …

Synthesis And Characterization Of Inosamines, Sing Raj Gurung

Masters Theses

This project is concerned with the preparation of scyllo-inosarnine hydrochloride 6, a biologically active compound, which bears six successive stereogenic centers. The synthesis of this compound would help elucidate the involvement of inosamines in biological nitrogen fixation. myo-Inositol served as the starting material to synthesize target compound 6. Regioselective protection and deprotection of myo-inositol provided azide 43 as key intermediate. In the final steps deprotection of five benzyl groups and reduction of azido group was achieved by catalytic hydrogenation. scyllo-Inosamine hydrochloride 6 was fully characterized by m.p., ¹H NMR, ¹³C NMR, IR, EA and via …

Surface Topography Contribution To Rfid’S Tags Efficiency Related To Resistivity, Mario A. Cruz

Masters Theses

The Radio Frequency Identification (RFID) is one of the new technologies with more vision and acceptance oriented to the distribution and storage industries. The RFID is a technology that can be used to identify, track and store information about groups of products, individual items, or product components, using radio waves. The RFID device needs an antenna in order to receive a signal and transmit information. The stamping process applied today to produce the RFID antenna works with foil or copper. These etched metal RFID tags offer good benefits, but the production cost is too high to achieve a widespread implementation. …

The Analysis Of Ceramic Symbolism From The First Street Site In Barbados, Aya Hashimoto

Masters Theses

The expression of race and racism in material culture is of increasing interest in historical archaeology ( e.g., Epperson 1990, 1999, 2000; Mullins 1996, 1999). This study investigates 6 ceramic sherds from one vessel associated with a white urban domestic site on First Street, in Holetown Barbados. This vessel conveys a racist message. A black slave in a loincloth serving tea to a white person is transfer printed on the ceramic. The ceramic seems to be an annular designed pearlware from England in the first half of the 19^th century.

By interpreting the meanings of the ceramic decoration, this …

Incisal Dental Microwear Of The Prehistoric Point Hope Communities: A Dietary And Cultural Synthesis, Kristin L. Krueger

Masters Theses

The prehistoric coastal communities of Point Hope, Alaska have been considered important Arctic archaeological sites since their initial excavations in 1939. The majority of the archaeological artifacts are grouped into two temporally distinct cultural components, the Ipiutak (2100-1500BP) and the Tigara (800-300BP). Although debated, Arctic archaeologists have suggested that the Ipiutak depended heavily on land mammals with only seasonal reliance on sea mammals, whereas the Tigara relied primarily on sea mammals including whales. While both groups clearly utilized foraging subsistence economies, the contrasts in their food acquisition strategies would have placed different demands on the males and females, particularly with …

Simulation Based Evaluation Of Parking Facilities, Niru Tiwari

Masters Theses

Transportation facility has emerged as one of the main indicators of a national's prosperity at the advent of 21^st century and is the backbone of American commerce and industry. There are over 600 million motor vehicles that are driven in the world today and the number of cars in use is expected to be doubled in next 30 years. As the number increases, more parking spaces should also be provided; however, it is difficult to supply sufficient parking space due to space limitations. To meet the need, new types of parking and new parking technologies have been introduced. However, …