Digital Commons Network^™

Microfluidic Biosensors For Intelligent Metabolite Monitoring, Nitin Radhakrishnan

Masters Theses

"Baseline (zero-value) drift and sensitivity degradation are two common problems related with biosensors. In order to overcome these problems, there is a great need for integrating an on-demand, in situ self-diagnosis and self-calibration unit along with the sensor. Utilizing the microfluidic technology, it is possible to explore the feasibility of implementing this function without any externally coupled bulky apparatus. A microsystem including a microfluidic channel and calibration electrodes are prepared by microfabrication techniques"--Abstract, page iv.

Security Analysis Of A Cyber-Physical System, Han Tang

Masters Theses

"Cyber-Physical Systems (CPSs) are an integration of computing and physical processes. Information flow is an inherent property of CPSs and is of particular interest at their cyber-physical boundaries. This thesis focuses on discovering information flow properties and proposes a process to model the information flow in CPSs. A Cooperating FACTS Power System serves as a tangible example to illustrate modeling information flow using the proposed process. The proposed process can be used to model the information flow security, help analyze current information flow security requirements, and aid in the design of further security policies in CPS"--Abstract, page iii.

Computational Study Of Flow Over Elliptic Airfoils For Rotor/Wing Unmanned Aerial Vehicle Applications, Timothy William Assel

Masters Theses

"The purpose of this study will be to conduct a parametric investigation on the performance of elliptic airfoils for Rotor/Wing Unmanned Aerial Vehicles. The objective of this study is to conduct a two-dimensional, aerodynamic analysis on a various elliptic airfoil parameters, compare the reults of the analysis with theoretical predictions and experimental results, and evaluate handling and performance characteristics of Rotor/Wing UAVs during hover, transition, and forward flight"--Abstract, page iii.

Application Of Hybrid Arq To Controller Area Networks, Krishna Chaitanya Emani

Masters Theses

"This thesis proposes two types of Hybrid Automatic Repeat reQuest (HARQ) schemes for the Controller Area Network (CAN) to combat Electro-Magnetic Interference (EMI) and improve network efficiency. The proposed HARQ schemes encode the original CAN data frames by a Reed-Solomon (R-S) code so that burst errors due to EMI may be corrected at the receive nodes. Therefore, the probability of error frames is reduced, thereby reducing the probability of retransmission. Hence, the network efficiency of the system is improved"--Abstract, page iii.

Modeling And Performance Estimation For Airborne Minefield Detection System, Saurabh Agarwal

Masters Theses

"Many programs aimed at airborne mine and minefield detection are being pursued and different algorithms are being developed and evaluated to achieve performance specifications. Thus far, no single algorithm or detection architecture has been able to fulfill the performance specifications for different mine and minefield detection scenarios...a need exists for a simulation based approach. One such simulation system is developed and evaluated in this thesis. The factors affecting the performance of an airborne detection system include physical parameters (type of background, time of day), data collection parameters (swath width, number of steps, in-step and in-flight overlap), and minefield scenarios. Data …

Attitudes Of Nurses Toward Research, Nancee Hofmeister

Masters Theses

The purpose of this study was to examine the attitudes of nurses toward research. Donabedian’s framework of structure, process and outcome is the conceptual model. A convenience sample (n=119) of registered nurses at a Midwest hospital answered Boothe’s Attitudes on Nursing Research Scale. The scale contains 84-items answered on a 5-point Likert scale. The scores were analyzed using descriptive statistics, t-tests, and ANOVA. Comparisons were made of the top and bottom quartile of item scores. The results indicate items that reflect structure and process are a subscale of the interest and environment scale. The most positive attitudes of the nurses …

Converting Some Global Optimization Problems To Mixed Integer Linear Problems Using Piecewise Linear Approximations, Manish Kumar

Masters Theses

"Some global optimization problems are converted to mixed-integer linear problems (MILP) using piecewise-linear approximations in this thesis so that they can be solved using commercial MILP solvers, such as CPLEX. Special attention is given to approximating two-term log-sum functions, which appears frequently in generalized geometric programming problems. Numerical results indicate the proposed approach is sound and efficient"--Abstract, page iii.

Refrigerant-Based Propulsion System For Small Spacecraft, Carl Reiner Seubert

Masters Theses

"The MR SAT spacecraft under development at UMR requires a propulsion system that can be utilized to perform orbital maneuvers and three-axis attitude control to complete its mission objective of conducting spacecraft formation flight. This thesis documents the research, analysis design and development of the cold gas propulsion system that was integrated on the MR SAT spacecraft"--Abstract, page iii.

Characterization Of Noise On Pdn And Electromagnetic Shielding, Sandeep K. R. Chandra

Masters Theses

"Modern FPGA and microprocessor have complex logic inside them, which draw current from the Power Distribution Network (PDN). This current drawn from the PDN creates disturbance on the PDN, which then propagates to other IC in different places on the Printed Circuit Board (PCB), and appears as a noise voltage. Ability to predict noise voltage at any point on the PCB gives a greater ability to carefully design the board and the PDN. In order to accurately predict the noise, it is important to accurately predict the current drawn and the transfer impedance from the source to the victim point. …

Security Architecture Methodology For Large Net-Centric Systems, Njideka Adaku Umeh

Masters Theses

"This thesis describes an over-arching security architecture methodology for large network enabled systems that can be scaled down for smaller network centric operations such as present at the University of Missouri-Rolla. By leveraging the five elements of security policy & standards, security risk management, security auditing, security federation and security management, of the proposed security architecture and addressing the specific needs of UMR, the methodology was used to determine places of improvement for UMR"--Abstract, page iii.

Use Of Analytical Hierarchy Process In University Strategy Planning, Mihir Gokhale

Masters Theses

"The selection of an appropriate strategy is critical for a university's success, and each university needs to capitalize on its own specialties and competencies for a competitive advantage. Strategy creation and planning in universities is generally a collective effort which relies on consensus. It is a complex process involving the setting of objectives and goals to achieve the strategic vision, and an analysis tool for evaluating and comparing different options and prioritizing objectives and goals is required. A high deductive capacity is necessary for aggregating the different trade-offs while prioritizing, which is challenging for a human mind. This thesis demonstrates …

Bridge Damage Detection Using An Intelligent Engineering System, Dionysios N. Danilatos

Masters Theses

"This thesis concerns the design of an algorithm that is capable to detect structural damage in civil infrastructure bridges. The algorithm, which will be dubbed Damage Diagnostics System throughout the thesis, is the software component of a broader Bridge Health Monitoring System. This broader system integrates software and hardware,such as sensors and data acquisition components...The rationale for the Structural Damage Diagnosis is based on the principle of the structural vibration testing. The Health Monitoring System captures the vibration signals, as the bridge responds to excitation from various sources. The purpose of the Diagnostic System is to extract information from the …

Adhesion-Delamination Mechanics Of Linear And Axisymmetric Film At Film-Substrate Interface, Ming-Fung Wong

Masters Theses

"This thesis is to characterize the thin membrane adhesion-delamination phenomena which occur in biological cells and micro-electro-mechanical systems (MEMS) operation. The delamination of a thin film adhered to a rigid substrate is subjected to the coupling effects of tensile residual stress and interfacial adhesion energy. The adhesion-delamination mechanics is derived using the classical linear elasticity and thermodynamics energy balance. The membrane deformation is here dominated by a mixed plate-bending and membrane-stretching, while the concomitant stress is neglected. An 1-dimensional model is first investigated where a pre-stressed rectangular film clamped at both ends delaminates from a rigid punch of the same …

Age Strengthening Of Gray Cast Iron: Alloying Effects And Kinetics Study, Thottathil Viswanathan Anish

Masters Theses

"Age strengthening of gray cast iron has become a critical issue with metal casters trying to optimize their process for the closest conformance to properties. This necessitated more robust and precise methods to predict age strengthening. Most foundries use age strengthening behavior to cast at hight carbon equivalents to facilitate smaller gating systems. Also, it is well known in the casting industry that the tool life improves with aging. Hence these foundries require a model to predict aging behavior and accelerate the mechanism from days to hours. This research focuses on the methods of composition adjustments to control aging properties, …

Equivalent Circuit For Transient Conduction And Convection Systems, Bassam Sabry Mohammad Abdelnabi

Masters Theses

"Transient response of a natural convection system is investigated by numerical simulation using FLUENT code. An Integrator Circuit analogy was recently proposed for natural convection system. The proposed analogy was further confirmed by these recent simulations. New simulation results also suggest that a natural convection system acts as a "Low Pass" filter for transients. Transient transmission/attenuation factor was found to be a function of both fluid properties and the flow characteristics. Transmission/attenuation factor was also found to be a strong function of fluctuation frequency"--Abstract, page iv.

Design And Implementation Of A Hardened Distributed Network Endpoint Security System For Improving The Security Of Internet Protocol-Based Networks, William Dee Atkins

Masters Theses

"This thesis proposes a distributed approach to securing computer networks by delegating the role of a conventional firewall to a collection of nodes and controllers placed throughout the networks they are intended toprotect from attack. This distributed firewall system is a specific application of a generalized distriubted system framework that is also proposed in this thesis. The design and implementation of both the generalized framework and the application of the framework in creating a distributed firewall system for use on Ethernet-based networks that rely on the Internet Protocol are discussed. Conclusions based upon the preliminary implementation of the proposed systems …

35-45 Giga Hertz Transceiver System For Phase And Magnitude Detection, Aman Aflaki Beni

Masters Theses

"Nondestructive evaluation (NDE) is the science and practice of examining an object in a way that the object's usefulness is not adversely affected. Different types of NDE methods exist but this thesis is based on microwave and millimeter wave NDE using imaging techniques. Microwave NDE is based on illuminating the object under test with a microwave signal and studying the various properties of the reflected signal from the object. This reflected signal contains some information about the inner structure of the object under test. This information may be contained in several parameters including the phase and magnitude of the reflected …

Integrated Product And Its Extended Enterprise Network Design Using Lean Principles, Abhijit K. Choudhury

Masters Theses

"Recently, many system integration companies have begun to intensely focus on suppliers' involvement in the product realization process to enhance their competitiveness. The product architecture has a huge impact on the efficiency of the integrator's supplier network. One of the ways to enhance efficiency is to implement the lean principles while creating a collaborative design/manufacturing/supply chain environment. In this study, two distinct stages of the product realization process, namely, design stage and production stage are considered for determining the design and production supplier networks"--Abstract, page iv.

Generic Algorithms And Null Convention Logic Hardware Implementation For Unsigned And Signed Quad-Rail Multiplication, Samarsen Reddy Mallepalli

Masters Theses

"This thesis focuses on designing generic quad-rail arithmetic circuits, such as signed and unsigned multipliers and Multiply and Accumulate (MAC) units, using the asynchronous delay-insensitive NULL Convention Logic (NCL) paradigm. This work helps to build a library of reusable components to be used for automated NCL circuit synthesis, which will aid in the integration of asynchronous design paradigms into the semiconductor industry"--Abstract, page iii.

Screening New Cytokinesis Genes And Investigation Of Regulation Of Hof1 In Cytokinesis, Jung Eun Park

Masters Theses

"In 1996, a complete sequence of the budding yeast genome was completed and numerous studies begun to discover the function of genes. A primary concern of this study was to identify genes that may function in cytokinesis. Seven candidate genes were chosen, which were previously shown to localize to the bud neck, the site of cytokinesis, or interact with a protein that is involved in cytokinesis. Six of those uncharacterized genes, YHR149C, YLR187W, YOL070C, YMR124W, YPL158C, and YOR304C-A, were identified by data generated by GFP tagging of the yeast proteome. Data from a large-scale two-hybrid screen was used to identify …

Static Evaluation Of The Out-Of-Plane Behavior Of Urm Infill Walls Utilizing Modern Blast Retrofit Systems, Trevor D. Hrynyk

Masters Theses

"Previous investigations have shown that the use of modern retrofit systems can significantly improve the behavior of URM infill walls subjected to variable out-of-plane loads. It has also been shown that the use of externally bonded retrofit systems can greatly reduce the amount of fragmentation and debris scatter that is found to occur in URM walls subjected to high intensity blast loads...The main objective of this study is to investigate, through static testing, the use of modern materials for the purpose of improving the behavior of URM walls subjected to blast loads. This study implemented externally bonded FRP grids and …

Empirical Investigation Of Enhanced Air Fins, Stephen John Dale Rucker

Masters Theses

"Enhanced convective heat transfer surfaces have been a subject of interest for quite some time. Many different methods have been used to increase the amount of heat transfered from a surface. However, nearly all surface enhancement methods come with a price, frictional losses. This thesis studies the use of enhanced convective heat transfer surfaces on air fins in the laminar, transitional, and turbulent flow regimes with emphasis on the transitional regime. A major goal of this thesis is to further the understanding of the influence of an enhanced wall geometry on the transition from laminar to turbulent flow. Causing the …

Current Measurement In Power Electronic And Motor Drive Applications - A Comprehensive Study, Asha Patel

Masters Theses

"Current measurement has many applications in power electronics and motor drives. Current measurement is used for control, protection, monitoring, and power management purposes. Parameters such as low cost, accuracy, high current measurement, isolation needs, broad frequency bandwidth, linearity and stability with temperature variations, high immunity to dv/dt, low realization effort, fast response time, and compatibility with integration process are required to ensure high performance of current sensors. Various current sensing techniques based on different physical effects such as Faraday's induction law, Ohm's law, Lorentz force law, magneto-resistance effect, and magnetic saturation are studied in this thesis. Review and examination of …

Shielding Characteristics Of A Commercial 19-Inch Rack-Based Cabinet, Jue Chen

Masters Theses

"From an electromagnetic compatibility perspective, a commercial 19-inch rack-based cabinet of 40U height is comprised of different functional modules housed in well-shielded enclosures. Three methodologies are applied to investigate the overall shielding performance of various cabinet features, including doors, side panels and cable egress, an important feature that is of primary interest here"--Abstract, page iii

Vision Based Leader-Follower Formation Control For Mobile Robots, Gerard Sequeira

Masters Theses

"Creating systems with multiple autonomous vehicles places severe demands on the design of control schemes. Robot formation control plays a vital role in coordinating robots. As the number of members in a system rise, the complexity of each member increases. There is a proportional increase in the quantity and complexity of onboard sensing, control and computation. This thesis investigates the control of a group of mobile robots consisting of a leader and several followers to maintain a desired geometric formation"--Abstract, page iii.

Synthesis And Characterization Of Platinum-Based Multi-Component Catalysts For Direct Methanol Fuel Cells, Li Ren

Masters Theses

"In the thesis work, Pt-based binary, ternary, quaternary alloy anode catalysts supported on sonochemically treated multi-walled carbon nanotubes (CNTs) were synthesized with ethylene glycol reduction of corresponding metal chloride salts. Inductively coupled plasma-mass spectroscopy (ICP-MS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) were used for catalyst characterization. Cyclic voltammetry for methanol oxidation and CO stripping were used to evaluate the performance of the catalysts.

PtRu nanoparticles supported on CNTs (PtRu/CNT) were prepared under a series of pHs. It was found that the PtRu particle size, composition, and catalytic activity were all sensitive to the deposition …

Design For Test Techniques For Asynchronous Ncl Designs And Fpgas, Sindhu Kakarla

Masters Theses

"Testing of an electronic chip is an important step in the design process, as it can detect faults and ensure reliability. Design for Test (DFT) methods are used to modify existing designs to enable their testing by Automatic Test Pattern Generators. This thesis focuses on developing testing techniques for design automation of NULL Conventional Logic (NCL) circuits and for detection of capacitive crosstalk effects in Field Programmable Gate Arrays (FPGAs).

A novel technique is developed for testing asynchronous NCL designs aimed at good fault coverage with acceptable gate overhead. The technique focuses on testing stuck-at-faults in the internal feedback paths …

The Medieval Influences Of Shakespeare’S Richard Iii: Morality Plays, Miracle Plays, And The Chronicles, Elizabeth Jane Shelley

Masters Theses

There are many striking similarities between Shakespeare’s The Tragedy of King Richard III and several types of medieval works. The morality play genre is most distinctly represented by Richard’s representation as the Vice, a popular figure first characterized as the devil’s helper who eventually eclipsed the devil and became the sole figure of evil. Riehard also shares characteristics with the miracle or mystery play figures of Cain and Herod, figures who commit evil deeds and are rightly punished by God. Shakespeare was also strongly influenced by the chronicle accounts of Raphael Holinshed and Edward Hall, who base their accounts of …

Long-Arm Splinting For Lateral Epicondylitis: A Case Study, Crystal Wolters

Masters Theses

Lateral epicondylitis is a debilitating condition that has a significantly negative effect on the occupational lives of many people. There appears to be no recognized ideal treatment method for the condition. Long-arm splinting for lateral epicondylitis has not been addressed in the literature. A case study was used to thoroughly describe one participant’s experience with long-arm splinting to treat her lateral epicondylitis. She was interviewed, observed, and measurements were taken of her affected arm’s range of motion and strength. The seven themes which were identified through these methods include a description of how her lateral epicondylitis developed, her description of …

The Acute Effects Of Therapeutic Activities On Heart Rate And Blood Pressure: A Literature Review, Patricia Figueiredo Teles

Masters Theses

This review was initiated to identify the best available evidence on the acute effects of therapeutic activities on heart rate (HR) and blood pressure (BP). The inclusion criteria consisted of studies relevant to the topic that investigated adult subjects. The search covered three major databases using key words related to the topic. Due to the nature of the identified investigations, data were summarized using narrative rather than statistical methodology. A total of 3,447 reports of which 43 met the inclusion criteria were reviewed. There is evidence to suggest that certain therapeutic activities may induce a significant acute increase of HR …