Digital Commons Network^™

Field Programmable Gate Array Based Multiple Input Multiple Output Transmitter, Richa Shekhar

Masters Theses

"MIMO is an advanced antenna technology compared to Single Input Single output (SISO), Multiple Input Single Output (MISO), and Single Input Multiple Output (SIMO) and is used to obtain high data rate in the system. Multiple-Input Multiple-Output (MIMO) systems have at least two transmitting antennas, each generating unique signals. However some applications may require three, four, or more transmitting devices to achieve the desired system performance. This thesis describes a comparison between different approaches like the microcontroller, ASICs and the FPGA available in the market for baseband signal generation. It also describes the design of a scalable MIMO transmitter, based …

A Framework For Transparent Depression Classification In College Settings Via Mining Internet Usage Patterns, Raghavendra Kotikalapudi

Masters Theses

Depression is a serious mental health problem affecting the mind and body of people in our society. As of today, depression affects about 5 to 7% of the American population, which roughly translates to 14 million people! A particularly worrying concern these days is the increasing incidence of depression among college students. The problem is so severe that many US campuses have dedicated centers with mental health professionals catering to students needs. Although there are very effective treatments for depression, studies report that ~80% of depressed students do not seek any help due to the lack of perception of the …

Model Based Diagnostics And Prognostics Of Practical Industrial Systems, Raja Sekhar Kraleti

Masters Theses

"In this thesis, the diagnosis and prognosis of single and simultaneous multiple incipient faults in practical industrial systems is demonstrated in two papers. For the purpose of fault detection and failure prediction, a model based strategy is adopted, which involves using an online adaptive estimator. The online estimator estimates the system dynamics. Residual is generated based on the physical system model and the estimated system dynamics. This residual is used to detect the fault. Once the fault is detected, a tunable nonlinear neural network online approximator in discrete-time (OLAD) along with a robust adaptive term is initiated. The OLAD utilizes …

Design And Control Of A Multi-Axis Micro-Electro-Mechanical System Array For Coordinated Micro-Manipulation, Patrick Jesse White

Masters Theses

"Micro-electro-mechanical system design and implementation is a field that has received much attention over the past few decades. These robotic systems with features on the micro-scale have an unparalleled opportunity to change the way scientists interact with and understand micro and nano-scale phenomenon. Their capabilities allow experimentation that cannot be achieved with standard macro-scale equipment. Potential applications range from observing biological processes in living cells, to smart materials that automatically detect microcracks. So far, however, only a few truly successful applications have been realized. One of the most elusive goals in MEMS design is creating a system capable of coordinated …

Grid Frequency And Voltage Support Using Photovoltaic Systems With Energy Storage Assist, Ravi Bhatt

Masters Theses

"An optimized operating scheme for a grid-connected community based photovoltaic (PV) system is described. The system can participate in grid ancillary services like frequency and voltage regulation functions based on the Smart Grid framework. The proposed model comprises of a PV plant with Li-ion batteries coupled to the grid by means of a three-phase inverter. A two-way communication between the PV plant and the grid is assumed. The PV/storage plant provides constant updates on its current kW/kVar capability and the grid transmits the demand for specific amounts of power and for specific lengths of time. The battery charging energy can …

Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati

Masters Theses

"Determining shale gas petrophysical properties is the cornerstone to any reservoir-management practice. Hitherto, conventional core analyses are inadequate to attain the petrophysical properties of shale gas at submicron-scale. This study combines interdisciplinary techniques from material science, petrophysics, and geochemistry to characterize different shale gas samples from North America including Utica, Haynesville and Fayetteville shale gas plays. Submicron pore structure, clay mineralogy, wettability and organic matter maturation were investigated to evaluate the petrophysical properties of shale gas rocks and to determine the impact of organic and inorganic matters on wettability alteration for different fracturing fluids on shale gas rocks.

High pressure …

Inherent And Model-Form Uncertainty Analysis For Cfd Simulation Of Synthetic Jet Actuators, Daoru Frank Han

Masters Theses

"A mixed aleatory (inherent) and epistemic (model-form) uncertainty quantification (UQ) analysis method was applied to a computational fluid dynamics (CFD) modeling problem of synthetic jet actuators. A test case, (Case 3, flow over a hump model with synthetic jet actuator control) from the CFDVAL2004 workshop was selected to apply the Second-Order Probability framework implemented with a stochastic response surface obtained from Quadrature-Based Non-Intrusive Polynomial Chaos (NIPC). Three uncertainty sources were considered: (1) epistemic uncertainty in turbulence model, (2) aleatory uncertainty in free stream velocity and (3) aleatory uncertainty in actuation frequency. Uncertainties in both long-time averaged and phase averaged quantities …

The Sorption Of Chemical And Nuclear Contaminants From Soil And Water Using Nanosize Particles Of Hydroxyapatite, Chyrene Joseph

Masters Theses

"High surface area (>200 m²/g) crystals composed of nanosize (30-50nm) hydroxyapatite; (Ca₅(PO₄)₃OH) particles are being investigated as an alternative in cleaing [sic] contaminated groundwater and soil by removing toxic wastes and radionuclides. Static batch tests were carried out at 2, 4, 8, 24 and 120 hour time periods by reacting hydroxyapatite with individual solutions prepared with specific elements to evaluate the applicability of hydroxyapatite in removing potential contaminants. Chemical analyses on leachant solutions, leachate solutions, and post-reaction digested solids were conducted by Inductively Coupled Plasma-Mass Spectroscopy to determine the extent of ion removal. Removal of these ions is expected …

Design And Development Of Manufacturing Methods For Manufacturing Of Pem Fuel Cell Mea's, Nikhil Pramod Kulkarni

Masters Theses

"This thesis focuses on design and manufacturing of Fuel cell components using Additive Manufacturing techniques and then in the later part on design and manufacturing of Membrane Electrode Assembly (MEA) which is a very important component in fuel cells. Additive manufacturing methods are fast and efficient manufacturing methods which are additive building up components layer by layer instead of conventional subtractive manufacturing techniques. This ensures low cost and faster manufacturing. Additive manufacturing is important for fuel cell component manufacturing since it is important in fuel cells to minimize wastage and reduce the cost. MEA is the basis of the cost …

Continuous Low Thrust For Small Spacecraft Proximity Operations, James Harris Meub

Masters Theses

"Recently, both DoD and NASA have demonstrated increased interest in the development of close proximity operations for space systems. AFRL's Advanced Sciences and Technology Research Institute for Astrodynamics (ASTRIA) has defined several key research topics relevant to military priorities, with one area of critical importance being the inspection and observation of low Earth orbit resident space objects (RSOs). This study investigates the feasibility of using a low-thrust cold-gas propulsion system to effectively and accurately facilitate resident space object inspection. Specifically, this study focuses on the Missouri S&T Satellite mission (M-SAT) as a means to demonstrate autonomous RSO inspection. This paper …

Design Of A Hydrogen Community For Santa Monica, Vijay Mohan

Masters Theses

"Hydrogen systems infrastructure development and fuel cell vehicles (FCVs) have the potential to replace the gasoline internal combustion engine vehicles thus increasing energy security and reducing greenhouse gas emissions. Hydrogen fueling infrastructure development is critical for the commercialization and consumer acceptability of the FCVs, thus recognizing hydrogen as an affordable transportation fuel. This paper presents the conceptual design of a scalable and reproducible hydrogen fueling station in Santa Monica, California. The various hydrogen production technologies have been evaluated and the usage of renewable energy sources such as biogas and landfill gas has been emphasized. The technical specifications of the hydrogen …

Driven Pile Load Test Data For Load And Resistance Factor Design In Missouri, Joseph Ronson Cravens

Masters Theses

"The Missouri Department of Transportation (MoDOT) has recently migrated from allowable stress design (ASD) to load and resistance factor design (LRFD) of driven piles. This transition was initiated when the Federal Highway Administration (FHWA) issued a policy stating that all new bridge designs shall be designed in accordance with the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications to eliminate the difference in design methodologies for bridge superstructures and bridge substructures. However, the resistance factors for driven piles specified in the AASHTO LRFD specifications are based on nationwide pile data, consisting of a wide range …

Shaker Table Vibration Testing Of A Microsatellite, Tonya Michelle Sanders

Masters Theses

"In the satellite development process, structural testing is a means to gain confidence in analytical models and ultimately support qualification of the spacecraft for flight. Vibration testing, in particular, is motivated by the safety considerations of crew or launch personnel, the survivability of delicate hardware and electronics, and the avoidance of large stresses that cause structural fatigue or failure. The subject of this thesis is concerned with the shaker table vibration testing of a microsatellite pair designed and built by students at the Missouri University of Science and Technology in Rolla, Missouri. A finite element model (FEM) used in structural …

Magnetometer-Only Attitude Determination With Application To The M-Sat Mission, Jason D. Searcy

Masters Theses

"The topic of this thesis focuses on attitude determination for small satellites. The method described uses only a magnetometer to resolve the three-axis attitude of the satellite. The primary challenge is that magnetometers only instantaneously resolve two axes of a satellite's attitude. Typically, magnetometers are used in conjunction with other sensors to resolve all three axes. However, by using a filter over an adequately long orbit arc, the magnetometer data can yield all the information necessary. The magnetic field data are filtered to obtain the magnetic field derivative vector, which are combined with the magnetic field vector to fully resolve …

Educational Robotics: Using The Lego Mindstorms Nxt Platform For Increasing High School Stem Education, Matthew Aaron Strautmann

Masters Theses

"The field of educational robotics (ER) seeks to use the building and programming of robots to engage and educate the next generation of college freshman entering science and engineering majors. To increase the rate of application to science and engineering degree programs as well as the rate of retention, students must be engaged in high school. They must acquire the knowledge and interest to pursue these career choices. This research explores the use of robotics to interest high school students in science, technology, engineering, and math (STEM) and to improve their knowledge of these subjects. The case study developed instructional …

Isolation And Characterization Of Bacterial Symbionts From Crotalaria Spectabilis Grown On Trichloroethene Contaminated Soil, April Lyn Rocha

Masters Theses

"The discovery of several members of the Leguminosae family growing on a TCE contaminated site demonstrated that they have the capabilities to tolerate the TCE contamination. This led to an investigation of the plants' ability to metabolize TCE. Research by Dr. Lee Newman showed that nodules from Crotalaria spectabilis grown on the site had TCE metabolites present while nodules from other legumes at the site did not. The presence of TCE metabolites within the C. spectabilis nodules suggests that the bacterial symbiont may be responsible for TCE metabolism. This led us to investigate the symbiont of C. spectabilis and its …

Evaluation Of The Orientation Of 90⁰ And 180⁰ Reinforcing Bar Hooks, Nichole Lynn Podhorsky

Masters Theses

"This thesis describes test results of a study initiated to evaluate the potential influence of hook tilt angle of standard reinforcing hooks on the bond strength of concrete. The topic of the evaluation of the orientation of 90 and 180 degree reinforcing bar hooks in concrete members was identified by the Concrete Reinforcing Steel Institute (CRSI) as high-priority for the reinforcing steel industry. In this test program, a series of single bar and multiple bar specimens were designed and tested to examine bar behavior and potential group effects that may exist in wide flexural members with multiple bars, such as …

Impact Effects Of Explosively Formed Projectiles On Normal And High Strength Concrete, Laurin Ashley Bookout

Masters Theses

"The ability to quickly estimate the damage that a projectile will do to a structure is highly desired for structures that will be required to resist threats of this nature. There are several formulas for concrete penetration due to projectile impact that are based on empirical data. However, there is a lack of publicly available data for projectile impacts with striking velocities that exceed 1 km/s and have weights greater than a few grams. This research is intended to expand the available data on explosively formed projectile impacts and determine which, if any, of the existing equations can be used …

Integrated Reliable And Robust Design, Gowrishankar Ravichandran

Masters Theses

"The objective of this research is to develop an integrated design methodology for reliability and robustness. Reliability-based design (RBD) and robust design (RD) are important to obtain optimal design characterized by low probability of failure and minimum performance variations respectively. But performing both RBD and RD in a product design may be conflicting and time consuming. An integrated design model is needed to achieve both reliability and robustness simultaneously. The purpose of this thesis is to integrate reliability and robustness. To achieve this objective, we first study the general relationship between reliability and robustness. Then we perform a numerical study …

Social Network Analysis Of The Video Bloggers' Community In Youtube, Anusha Mogallapu

Masters Theses

"This research studied the structure of the social network of the video blogger community on YouTube. It analyzed the social network structure of friends and subscribers of the 187 video bloggers on YouTube and calculated the social network measures. This thesis compares the results to the structure described by Warmbrodt et al. in 2007 and explains the reasons for the distinctions. The number of video bloggers has increased enormously, and the form of their interactions has changed. As a result, the video blogger social network has evolved from a core/periphery structure to one that is centralized. This indicates that the …

An Incentive Based Approach To Detect Selfish Nodes In Mobile P2p Network, Hemanth Meka

Masters Theses

"The growth of mobile devices led to the wide use of Mobile P2P networks. These networks are used in a wide variety of areas and hence there is lot of research in the field of mobile networks. Detecting selfish nodes is one of the research topics triggered due to the popularity of mobile P2P networks. It is necessary to detect selfish nodes in such networks to improve the efficiency of the network. In this thesis, an incentive based approach to detect selfish nodes is designed and evaluated. This approach differs from the existing work as it (i) can be used …

Design Of A Conditioner For Smoothing Wind Turbine Output Power, Murali Bottu

Masters Theses

"As a result of wind speed intermittency, wind turbine output power can be highly variable. The large variability in output power can adversely impact local loads that are sensitive to pulsating power. To mitigate large swings in power, the wind turbine output power can be smoothed by using a small energy buffer. A power conditioner is proposed to smooth the wind power output by utilizing the energy of an ultracapacitor. The conditioner is based on a single phase voltage source inverter (VSI) connected between the grid interconnection point and the ultracapacitor. The shunt VSI injects or absorbs active power from …

Ozone Uptake Rates And Secondary Product Emissions Of Green Building Materials, Seth Paul Lamble

Masters Theses

"Building materials considered "green" were tested for their ability to remove ozone and their potential to generate undesirable byproducts such as aldehydes. Three types of ceiling tile were tested, along with seven flooring materials and eight wall materials. These materials were selected based on "green" criteria. For several this means they were recycled or produced from renewable resources. Others were designed to be low emitting, or due to their composition were likely to be low emitting. Ozone deposition velocities ranged from 0.25 m h-1 for a type of resilient linoleum type flooring to 8.23 m h-1 for a clay based …

Installation And Performance Evaluation Of Coaxial Cable Sensors For Crack And Corrosion Detection, Iana Muchaidze

Masters Theses

"Even under service loads, reinforced concrete (RC) structures can develop cracks that result in excessive deflection of the structures and provide passages for moisture to corrode steel reinforcement. It is thus critical to develop a simple, cost-effective tool for real-time crack monitoring and associated corrosion detection that may affect the engineering maintenance of RC structures. The objectives of this study include: (1) to develop a die-cut manufacturing process of coaxial cables with spiral outer conductors, (2) to quantify the sensing properties of a miniaturized topology-based crack sensor, (3) to investigate the effectiveness of various sensor installation procedures in RC applications, …

Applying Text Timing In Corporate Spin-Off Disclosure Statement Analysis: Understanding The Main Concerns And Recommendation Of Appropriate Term Weights, Aravindh Sekar

Masters Theses

"Text mining helps in extracting knowledge and useful information from unstructured data. It detects and extracts information from mountains of documents and allowing in selecting data related to a particular data.

In this study, text mining is applied to the 10-12b filings done by the companies during Corporate Spin-off. The main purposes are (1) To investigate potential and/or major concerns found from these financial statements filed for corporate spin-off and (2) To identify appropriate methods in text mining which can be used to reveal these major concerns.

10-12b filings from thirty-four companies were taken and only the "Risk Factors" category …

Novel Transparent Conductive Materials: Understanding And Prediction, Yaou Song

Masters Theses

"Transparent conductive oxides (TCOs) such as doped In₂O₃, ZnO, SnO₂ or CdO are highly attractive due to their special properties, which are electrical conductivity and optical transparency. The lack of complete understanding of the fundamentals behind this unique phenomena and rapidly increasing commercial demand draw a lot of interest in investigating this kind of materials. More efficient, environmentally friendly and less expensive transparent conductive materials are needed for a variety of applications, and a general understanding of the origins of the unusual behavior would help further search for potential transparent conductive (TC) candidates. Understanding the basic properties of conventional TCOs …

Effects Of A Nickel Reactor Liner And Other Reaction Variables During Supercritical Water Reformation Of Glycerin, Michael S. Stever

Masters Theses

"The non-catalytic reformation of glycerin using supercritical water was conducted in a 400-mL tubular reactor constructed of Haynesʼ Alloy 230. The evaluated parameters for this thesis include water-to-glycerin molar ratios ranging from 3 to 24 and reactor temperatures ranging from 500⁰C to 700⁰C. In addition, experiments were performed using the Haynes' Alloy 230 reactor both without a liner and with a Nickel 201 liner. Space time was maintained at approximately 100 seconds and the reactor pressure was kept constant at 24.1 MPa. The resultant effect on product gas composition and carbon gasification was determined. The product gases consisted of a …

Characterization Of Shielding Effectiveness For Metallic Enclosures, Nicholas Bennett Mentesana

Masters Theses

"This topic discusses and verifies an equation for estimating the shielding effectiveness of metallic enclosures through the use of numerical simulations. Using ideas from Bethe's "Theory of Diffraction by Small Holes", a previous student from the Missouri S&T Electromagnetic Compatibility Laboratory developed an equation that would yield an envelope prediction for the worst-case EMI from an aperture array backed by an over-moded cavity. Min Li (PhDEE '99) used results from measurements, simulations, and physics-based equations to formulate a simple equation that would predict these EMI levels. The main purpose of this thesis is to revisit this work and determine when …

Mutual Attraction Guided Search: A Novel Solution Method To The Traveling Salesman Problem With Vehicle Dynamics, Jared Adam Nisbett

Masters Theses

"Traveling Salesman Problem (TSP) solution techniques are often used for route planning for automated vehicles. Most TSP solution methods focus on path length as the fitness reference, however in many cases, traversal time is of more practical importance. Mutual Attraction Guided Search (MAGS) is a novel solution method that uses an iterative process to simultaneously optimize both angle of travel through each target as well as the ordering of the targets in order to optimize path traversal time. MAGS deterministically locates a locally optimum solution quickly and can optimize for the acceleration limits of a specific vehicle rather than requiring …

Morpho-Tectonic Analysis Of The Tekeze And The Blue Nile Drainage Systems Of Northwestern Ethiopian Plateau, Ethiopia, Elamin Hassan Dai Ismail

Masters Theses

"This study examines the morpho-tectonic evolution of the drainage system in the northwestern Ethiopian plateau by focusing on the Tekeze and the Blue Nile Rivers. The plateau is underlain by Precambrian crystalline rocks, overlain by Mesozoic sedimentary section that is topped with a 1-3 km thick pile of Oligocene-Quaternary volcanic rocks. It is bounded in the east and southeast by the Afar Depression (AD) and the Main Ethiopian Rift (MER). Satellite derived Digital Elevation Models are analyzed using ArcGIS and RiverTools to extract morpho-tectonic parameters of tributaries of the Tekeze and Blue Nile Rivers including Normalized Steepness Index (K_{sn …}