Digital Commons Network^™

Predicting Solar Radiation Based On Available Weather Indicators, Frank Joseph Sauer

Masters Theses

"Solar radiation prediction models are complex and require software that is not available for the household investor. The processing power within a normal desktop or laptop computer is sufficient to calculate similar models. This barrier to entry for the average consumer can be fixed by a model simple enough to be calculated by hand if necessary.

Solar radiation modeling has been historically difficult to predict and accurate models have significant assumptions and restrictions on their use. Previous methods have been limited to linear relationships, location restrictions, or input data limits to one atmospheric condition. This research takes a novel approach …

Technical Modeling And Control System Development Of Hybrid Energy System Using Coal, Nuclear, Wind And Diesel, Uday Guntupalli

Masters Theses

"Addressing the growing energy concerns of the modern world is a challenging problem. Traditional carbon intensive fuel sources like coal, diesel which are instrumental in meeting today's grid demand are struggling to meet the stringent environmental regulations. Operations of independent renewable energy sources despite reducing costs are not comparable to existing costs of electricity. A sustainable approach to address these concerns is proposed in this work. A hypothetical hybrid system involving traditional fuel sources like coal, small modular nuclear reactor and renewable energy source wind is analyzed through dynamic modeling using various tools.

Various simulation tools were analyzed and the …

Fuzzy Logic Color Detection: Blue Areas In Dermoscopy Melanoma Images, Mounika Lingala

Masters Theses

"Malignant melanoma is one of the deadliest forms of skin cancer and is one of the most rapidly increasing cancers in the world. Image analysis techniques for the early detection of melanoma are dependent upon the detection of multiple color shades in melanoma images. Use of magnified visible-light imaging by dermoscopy allows detailed investigation of these color shades. This research explores the fuzzy logic methods for the detection and characterization of blue color shades to discriminate melanoma from benign skin lesions. Standard thresholds are placed on the RGB dermoscopy images firstly and then the restrictiveness is explored by implementing fuzzy …

Development Of A New Temporary Fastener For Aerospace Automation, Xiangwen Zhang

Masters Theses

"Temporary fasteners are required in aircraft assembly, especially in the assembly of wings, fuselage, and aircraft skin's substructure prior to drilling holes for permanent fasteners by automated drilling machines. The objective was to develop a temporary fastener that can be installed, clamped, loosened, and removed from one side with a short head length. Published papers, web pages and patents relating to temporary fasteners were reviewed. Then by considering the ability to meet the operation requirements and concerns, a temporary fastener was designed with the following advantages:

• a simple structure that can be easily fabricated
• a short head length to save …

Women Authors Of Technical Writing Textbooks From 1923 To 1973, Melissa Nicole Wampler

Masters Theses

"The published histories of technical writing textbooks do not usually include many women-authored textbooks. To find out why women-authored textbooks have been marginalized in these pedagogical histories, I selected seven women-authored textbooks and four men-authored textbooks published from 1923 to 1973, investigated the backgrounds of the authors and key features of their textbooks, and used the collected data to compare the women-authored textbooks to the men-authored textbooks. I was not able to find any reason why the women-authored textbooks have been or should be marginalized in histories of technical writing textbooks; however, my study had several limitations. My thesis begins …

Sybil Detection In Vehicular Networks, Muhammad Ibrahim Almutaz

Masters Theses

"A Sybil attack is one where an adversary assumes multiple identities with the purpose of defeating an existing reputation system. When Sybil attacks are launched in vehicular networks, an added challenge in detecting malicious nodes is mobility that makes it increasingly difficult to tie a node to the location of attacks. In this thesis, we present an innovative protocol for Sybil detection in vehicular networks. Considering that vehicular networks are cyber-physical systems integrating cyber and physical components, our technique exploits well grounded results in the physical (i.e., transportation) domain to tackle the Sybil problem in the cyber domain. Compared to …

Feature Extraction Through Median-Split Algorithm Segmentation For Melanoma Detection, Venkata Sai Narasimha Kaushik Ghantasala

Masters Theses

""Detection of melanoma remains an empirical clinical science. New tools for automatic discrimination of melanoma from benign lesions in digitized dermoscopy images may allow an improvement in early detection of melanoma. This research implements a fast version of the median split algorithm in an open source format and applied to four-color splitting of the lesion area to capture the architectural disorder apparent in melanoma colors. This version of the median split algorithm splits colors along the color axis with maximum range". For a dermoscopy set of 888 images, K-means clustering algorithm is compared with a median split algorithm to find …

Automatic Detection Of Polypoid Skin Lesions: The Squash Sign, Saurabh G. Karnik

Masters Theses

“Earlier detection of malignant melanoma can save lives. Automatic in-vivo methods of melanoma detection including smart-phone applications are now available, but specificity is low, i.e. too many benign lesions are detected as possible melanomas. Polypoids, elevated and rounded lesions are one class of benign lesions. These raised lesions with piecewise circular borders, predominantly intradermal nevi and cutaneous polyps (IDNs), are always benign. Variegated coloring present in polypoid lesions can lead physicians to perform an unneeded biopsy. Contact dermatoscope plates with gel squash these lesions, leaving a “squash sign” marker of benignancy which can be automatically detected. We present a method …

Significance And Analysis Of Milia-Like Cysts In Dermoscopy Skin Lesion Images, Sneha K. Mahajan

Masters Theses

“Milia-like cysts (MLCs) are dermoscopic structures frequently observed in seborrheic keratoses(SKs), which are the most common type of skin lesions. Diverse appearances of these skin lesions make them difficult to differentiate from melanoma, a deadly type of skin cancer. Classified by size into two main groups, starry MLCs and cloudy MLCs, the presence of these structures in a skin lesion has been known to help differentiate benign lesions from melanoma. Though the presence of cloudy MLCs is not exclusively associated with SKs, they can be a useful tool to differentiate SKs from melanoma. This research study determines the statistical occurrence …

Effects Of Machining Parameters On Cutting Forces,Shear Angle And Friction In Orthogonal Turning Of Titanium Alloys, Hilary Onyishi

Masters Theses

“Paper 1 presents the results of the investigations on the effects of machining parameters on cutting forces, shear angle and friction in orthogonal turning of titanium alloy tube. Uncoated fine-grained cemented tungsten carbide (WC/Co) and Physical Vapour Deposition (PVD) TiAlN coated grade turning tool inserts, with 5⁰ and 15⁰ rake angles were used under low and high cutting speeds of 120 and 240m/min, at three different feedrates (0.05, 0.075 and 0.1 mm/rev). The experiments were conducted under flooded coolant to reflect what is practically obtainable in manufacturing industries. The experimental results show that cutting forces at two selected cutting speeds …

Rotary Displacement Piezoelectric Energy Harvester, Headman Sanei

Masters Theses

“This study proposes a novel piezoelectric energy harvester for rotary motion applications. It is based on an annular unimorph plate, mounted on a shaft rotating at a constant angular velocity, under constant amplitude point-wise force. The mathematical model and the analysis was proposed for the inverse problem of a rotating disk under a static stationary force. The disk, however, is assumed to be stationary subjected to a traveling force. The distributed parameter electromechanical equations governing the behavior of the system are provided in closed-form, incorporating both an AC and a simple rectifier circuit. The performance of the energy harvester was …

Manual Modification And Plasma Exposure Of Boron Nitride Ceramic To Study Hall Effect Thruster Plasma Channel Material Erosion, Alexander J. Satonik

Masters Theses

"Worn Hall effect thrusters (HET) show a variety of unique microstructures and elemental compositions in the boron nitride thruster channel walls. Worn thruster channels are typically created by running test thrusters in vacuum chambers for hundreds of hours. Studies were undertaken to manually modify samples of boron nitride without the use of a hall effect thruster. Samples were manually abraded with an abrasive blaster and sandpaper, in addition to a vacuum heater. Some of these samples were further exposed to a xenon plasma in a magnetron sputter device. Sandpaper and abrasive blaster tests were used to modify surface roughness values …

Quantization Noise Analysis Of A Closed-Loop Pwm Controller That Includes Σ-Δ Modulation, Anupama Balakrishnan

Masters Theses

"Σ-Δ modulation is a popular noise shaping technique which is used to move the quantization noise out of the frequency band of interest. Recently, a number of authors have applied this technique to a pulse width modulation (PWM) controller for switching power converters. However, previous analysis has not incorporated the effects of analog-to-digital converter (ADC) resolution or feedback control on the Σ-Δ modulator. In this work, quantization due to ADC resolution and PWM resolution are analyzed, considering the effects of noise-shaping and feedback. A number of simulations have been performed to explore the impact of various design choices on output …

Security Analysis Of A Cyber Physical System : A Car Example, Jason Madden

Masters Theses

"Deeply embedded Cyber Physical Systems (CPS) are infrastructures that have significant cyber and physical components that interact with each other in complex ways. These interactions can violate a system's security policy, leading to the leakage of rights and unintended information flow. This thesis will explore information flow as it uses a public channel. In order to exemplify the use of the public channel, a vehicle being composed of the computer system and its operators will show how information is disclosed to an observer. The example is made up of a vehicle traveling across some terrain with an observer watching the …

Development Of A Methodology For Pseudo-Rigid-Body Models Of Compliant Segments With Inserts, And Experimental Validation, Raghvendra Sharadchandra Kuber

Masters Theses

"Compliant mechanisms have shown a great deal of potential in the last few decades in providing better solutions to design problems with numerous benefits; however, their use has been limited due to current challenges in the material selection. With ever increasing focus on the applications of compliant mechanisms, it is necessary to find alternatives to the existing materials and methods of prototyping. The purpose of this work is to develop a methodology for pseudo-rigid-body models of compliant segments with compliant inserts, comprised of a resilient material placed between the layers of a softer material, to alleviate any creep and strength …

Paste Development And Co-Sintering Test Of Zirconium Carbide And Tungsten In Freeze-Form Extrusion Fabrication, Ang Li

Masters Theses

"Ultra-high temperature ceramics are being investigated for future use in aerospace applications due to their superior thermo-mechanical properties, as well as oxidation resistance, at temperatures above 2000°C. However, their brittle properties make them susceptible to thermal shock failure. Components fabricated as functionally graded materials (FGMs) can combine the superior properties of ceramics with the toughness of an underlying refractory metal by fabricating graded composites. This paper discusses the grading of two materials through the use of a Freeze-form Extrusion Fabrication (FEF) system to build FGMs parts consisting of zirconium carbide (ZrC) and tungsten (W). Aqueous-based colloidal suspensions of ZrC and …

Comparison Of Class Ii Injection Well Area Of Review Requirements With Area Of Evaluation For Hydraulically Fractured Wells, Yashesh Jitendra Panchal

Masters Theses

"Since 2010 the US Environmental Protection Agency (EPA) has been proposing plans to study, and has now initiated research regarding the potential impact of hydraulic fracturing processes on drinking water sources. Their work refers to an 'Area of Evaluation' around a hydraulically fractured well, inferring that the wells immediately around hydraulic fractured wells should be studied, to evaluate the conditions of these wells and their potential to contaminate overlying USDWs. Class II injection wells must have a minimum 1/4 mile radius area of review to determine the condition of wells surrounding the proposed injection well. All wells within this AOR …

Comparative Evaluation Of N-Acetylcysteine And N-Acetylcysteine Amide In Acetaminophen-Induced Oxidative Stress, Ahdab Naeem Khayyat

Masters Theses

"Acetaminophen (APAP) is the most widely used pharmaceutical analgesic-antipyretic agent in the world, but its toxicity is a common cause of drug-induced hepatotoxicity. With APAP toxicity, cellular glutathione (GSH) is depleted. This results in the availability of N-acetyl-p-benzoquinone imine (NAPQI), is a toxic metabolite of APAP that binds to cellular macromolecules, which leads to cell necrosis. N-acetyl cysteine (NAC), a GSH precursor, is the only approved antidote for an acetaminophen overdose. It is a negatively charged molecule that diminishes its penetration into the cells, thereby requiring fairly high doses that increase the severity of side effects. In addition, oral and …

Parameter Optimization For Controlling Aluminum Loss When Laser Depositing Ti-6al-4v, Richard Charles Barclay

Masters Theses

"The ability to predict the mechanical properties of engineering materials is crucial to the manufacturing of advanced products. In the aerospace industry, Ti-6Al-4V is commonly used to build structures. Any deviation from the alloy's standard properties can prove detrimental. Thus, the compositional integrity of the material must be controlled. The ability to directly build and repair large, complicated structures directly from CAD files is highly sought after. Laser Metal Deposition (LMD) technology has the potential to deliver that ability. Before this process can gain widespread acceptance, however, a set of process parameters must be established that yield finished parts of …

Immersed Finite Element Method For Interface Problems With Algebraic Multigrid Solver, Wenqiang Feng

Masters Theses

"This thesis is to discuss the bilinear and 2D linear immersed finite element (IFE) solutions generated from the algebraic multigrid solver for both stationary and moving interface problems. In contrast to the body-fitting mesh restriction of the traditional finite element methods or finite difference methods for interface problems, a number of numerical methods based on structured meshes independent of the interface have been developed. When these methods are applied to the real world applications, we often need to solve the corresponding large scale linear systems many times, which demands efficient solvers. The algebraic multigrid (AMG) method is a natural choice …

Shopping Alone Online Vs. Co-Browsing: A Physiological And Perceptual Comparison, Ceren Topaloglu

Masters Theses

"Although shopping is a social activity frequently performed with friends and family members, most online shopping is done alone. With the development of Web 2.0 technologies and the increasing popularity of social networking sites, online social shopping has emerged as a new phenomenon that allows more social interaction, participation, and satisfaction for customers while shopping online. Therefore, companies have started to use social shopping tools in their e-commerce websites to facilitate online social shopping. Co-browsing is one of the more recent online social shopping tools available, enabling users to shop or browse together by offering synchronized web views and chat …

Fabry-Perot Interferometer Based Co₂ Sensor Using Ionic-Liquid, Mujahid Abdul

Masters Theses

"Anthropogenic greenhouse gas emission has become an eminent problem today especially CO₂ gas emission is of major importance. Statistics show that CO₂ concentration is consistently increasing in atmosphere every year. Having cognizance of this problem, better CO₂ absorbents, ionic liquids, has been suggested through this thesis. To prove Ionic liquid's efficiency, a unique sensor was developed by a sophisticated fabrication using Femto-second (fs) laser. Sensor is built to work as an extrinsic Fabry-Perot Interferometer (EFPI) to sense CO₂. EFPI sensor consists of a glass tube fused between two single mode fibers, and a miniature hole is fabricated in the tube …

Wolf Creek Dam: A Case Study Of Foundation Remediation For Dams Built On Karst Foundations, Kyla Justene Erich

Masters Theses

"Wolf Creek Dam was completed in 1952 as a 5,736-foot long and 258-foot high combination embankment-concrete gravity dam. Its storage capacity of 6 million acre feet makes it the ninth largest reservoir in the nation. The dam was built on a heavily karstified limestone foundation and began exhibiting signs of excess foundation seepage in late 1967. This led to extensive corrective work in the 1970s beneath the earthen core of the embankment to reduce underseepage. In 2006 an independent assessment by the Dam Safety Action Classification (DSAC) Peer Review Panel recommended that Wolf Creek Dam exhibited "Urgent and Compelling" foundation …

Water Management Capabilities Of Bio-Inspired Flow Field Configurations For Polymer Electrolyte Membrane Fuel Cells, Nicholas Warren Freer

Masters Theses

"Fuel cells have received an increasing amount of attention over the past decade for their power production capabilities. Polymer electrolyte membrane (PEM) fuel cells in particular are researched because of their high power density, large range of operating conditions, green products, and ease of scalability. PEM fuel cells do have a number of issues that reduce their overall performance. These issues include variations in reactant distribution, materials issues for the bipolar plate, and flooding caused by poor water management. Variations in the reactant distribution causes lower overall power output due to regions of low reactant density. This means that optimizing …

A Computational Study Of Driven Micro-Cavities In Supersonic Flat Plate Flow, Thomas Ryan Rehmeier

Masters Theses

"Driven micro-cavities embedded in the wall beneath turbulent supersonic boundary layers are analyzed using two-dimensional computational fluid dynamics. This concept is a passive flow control technique in which very small cavities formed by arrays of thin vertical walls are oriented transverse to the flow direction and underlie the boundary layer. The purpose is to reduce or eliminate skin friction drag. Various micro-cavity configurations were analyzed at locations (0.1 m and 1 m) downstream of the leading edges of flat plates, for free-stream Mach numbers of 1.2, 2.0, and 3.0. Results focus on net drag reduction achieved, cavity flow-field effects, perforation …

Effect Of Mix Parameters On Longevity Of Bituminous Mixtures, Clayton Reichle

Masters Theses

"This study was performed to evaluate the effects of varying aggregate sources, aggregate gradations on the stripping and rutting potential of bituminous based plant mixes specified by the Missouri Department of Transportation. The different aggregate combinations included two different aggregate sources (Potosi Dolomite and Jefferson City Dolomite) including two variations for the Jefferson City Dolomite mix to simulate a marginally in-specification mix and an out-of-specification but in-field tolerance mix. The "field" mix simulated the marginal mix where field tolerance of high dust and low binder content were maximized. All three mixes were evaluated for stripping susceptibility using the Tensile Strength …

Liquid Phase Sintering Of 20bi(Zn₀.₅Ti₀.₅)O₃-80batio₃ Dielectrics With Bismuth-Zinc-Borate And Bismuth Borosilicate Glasses, David I. Shahin

Masters Theses

"Dielectrics in the Bi(Zn₀.₅Ti₀.₅O₃-BaTiO₃ system (specifically 20BZT-80BT, in mol%) are promising candidates for high energy density capacitor applications due to broad temperature-dependent dielectric constant maxima and a relatively field-independent permittivity. Bulk samples require sintering temperatures of greater than 1180ºC to reach useful densities. Due to incompatibility of Bi with low-pO₂ processing, BZT-BT-based multilayer capacitors must utilize noble metal electrodes that resist oxidation during sintering. Sintering temperatures must be reduced to allow use of less expensive electrode materials (Cu, etc.). This work studies the reduced temperature sintering behavior and dielectric properties of BZT-BT sintered with 30 Bi₂O₃-30ZnO-40B₂O₃ and 50Bi₂O₃-25B₂O₃-25SiO₂ (mol%) liquid …

Wind Energy Assessment Using A Wind Turbine With Dynamic Yaw Control, Md Nahid Pervez

Masters Theses

The goal of this project was to analyze the wind energy potential over Lake Michigan. For this purpose, a dynamic model of a utility-scale wind turbine was developed to estimate the potential electrical energy that could be generated. The dynamic model was supported by wind data collected by an unmanned buoy based Laser Wind Sensor data acquisition system that has been deployed in Lake Michigan since October, 2011. Data summarization tools were also developed to help profile the wind resource based on the collected data.

Field Performance Of Alternative And Cost Efficient Cast In Place And Precast Prestressed Concrete Bridge Approach Slabs, Nathan Price Muncy

Masters Theses

"In December of 2010, the Missouri Department of Transportation (MoDOT) investigated alternative cost-efficient bridge approach slabs (BASs). New BAS designs were subsequently developed and had a projected cost savings up to twenty-four percent with anticipated equal or better structural performance. A precast-prestressed (PCPS) BAS was introduced as an alternative to traditional BASs that offers advantages such as rapid construction and improved long-term durability. The three new BAS designs were implemented into in-situ bridge projects by MoDOT and the field performance was evaluated within this research study.

Field testing of each BAS was performed using two MoDOT HS20 trucks. Various instrumentation …

Parallel-Connected Solar Arrays, Majed Meshal Alabbass

Masters Theses

"The purpose of this thesis is to investigate the advantages of having various series-parallel configurations of solar arrays and make a comparison between them. The objective is to determine the best PV system configuration and thus improve the overall efficiency of a solar array. The primary focus of this thesis is to study the parallel connection of PV panels for achieving maximum efficiency while extracting maximum energy from the solar radiation. A comparison between a series connected and a parallel connected solar PV array justifies the need for installing a parallel configured solar PV array to achieve optimum performance. The …