Digital Commons Network^™

Data Analysis Of Lane Merge And Lane Shift Sign Configurations In A Freeway Workzone, Satwinder Singh Thind

Masters Theses

"In this study, driver responses to alternative lane shift and lane merge signs are analyzed and compared using a driving simulation system. In particular, driver responses to the lane merge signs proposed by the Missouri Department of Transportation (MoDOT) are compared to the current lane merge signs recommended by the Manual on Uniform Traffic Control Devices (MUTCD) and driver responses to the lane shift signs proposed by MoDOT are compared to current lane shift signs recommended by MUTCD. The driving simulation system is composed of a driving simulator and a PC with data recording program such that the position coordinates, …

Characterization Of The Rectification Behaviour Of In-Amps And Estimating The Near Field Coupling From Smps Circuits To A Nearby Antenna Using Dipole Moments, Chunyu Wu

Masters Theses

"This thesis discusses two parts.

In the first part, the rectification behavior of popular instrumentation amplifiers is measured in both common mode and single-ended RF noise injection. It is recommended that AD8221 be used in common mode RF noise injection environment. And AD8220 and AD8429 are recommended in single-ended RF noise injection environment. The mechanism of RF noise rectification inside in-amps is also discussed. It is verified that rectification mainly happens at the non-inverting input of two op-amps in the first stage of an in-amp. The DC voltage difference between inverting input and non-inverting input of the in-amp is further …

A Physics-Based Approach For Power Integrity In Multi-Layered Pcbs, Biyao Zhao

Masters Theses

"Developing a power distribution network (PDN) for ASICs and ICs to achieve the low-voltage ripple specifications for current digital designs is challenging with the high-speed and low-voltage ICs. Present methods are typically guided by best engineering practices for low impedance looking into the PDN from the IC. A pre-layout design methodology for power integrity in multi-layered PCB PDN geometry is proposed in the thesis. The PCB PDN geometry is segmented into four parts and every part is modelled using different methods based on the geometry details of the part. Physics-based circuit models are built for every part and the four …

Multi Stage Recovery From Large Scale Failure In Interdependent Networks, Maria Angelin John Bosco

Masters Theses

"Node and link failures that usually cause limited damage in a single network, may cascade into large scale disasters in the case of interdependent networks, due to the dependencies that exist between them. Recovery from such failures may require multiple stages or steps for complete restoration of connection or flow between them. When critical services are disrupted, the order in which the broken elements are repaired affects the earliest possible recovery time of vital services. In a flow network, one order of restoration may restore more flow at an earlier stage than another. The paper aims to model an efficient …

Comparison Of Voltage Regulation Between Sst And Conventional Transformers In High Penetration Pv Power Systems, Gautham Ashokkumar

Masters Theses

"Solid state transformers (SST) are power electronic transformers combined with high-frequency conventional transformers and control circuitry capable of delivering high performance and flexible power control capabilities. This thesis focuses on analyzing the performance of SSTs in a distribution system with photovoltaic (PV) injection. In order to validate the performance of SSTs, average value models are used on the IEEE 34 bus distribution feeder network scaled to 12.47 kV. SST voltage profiles on the load side are analyzed and the unity power factor capabilities are demonstrated. This is followed by the study of voltage profiles on the primary side of the …

Shortest-Distance And Minimum-Cost Self-Charging Path Problems: Formulations And Application, Marc Monroe Teeter

Masters Theses

"In this study, self-charging paths for an electric bus are analyzed. Wireless-power-transfer technologies, when integrated on a road network, enable dynamic charging of electric vehicles. Roads implemented with a wireless-power-transfer technology are referred to as electric-roads in this study. Electric vehicles traversing on electric-roads, therefore, can be dynamically charged. This can further eliminate the need for static charging, i.e., the electric vehicle will not need to stop for charging.

This thesis analyzes the design of transit routes for an electric-bus so that the electric-bus is charged by only electric-roads. Specifically, the focus is on designing a path, which passes through …

Development Of A Variogram Approach To Spatial Outlier Detection Using A Supplemental Digital Elevation Model Dataset, Zane Daniel Helwig

Masters Theses

"When developing a ground water model, the quality of the dataset should first be evaluated. Spatial outliers can lead to predictions which are not representative of actual conditions. In order to isolate misrepresentative points, a method is presented which examines the experimental variogram of a ground water elevation dataset. To define a threshold variance between pairs of ground water elevation measures, ground elevation values from a digital elevation model (DEM) are used to determine a maximum reasonable variance expected to occur on the experimental variogram. To determine appropriate DEM parameters, a separate study was also done which observed characteristic behavior …

Long-Term Monitoring Of A Landslide In Stone County, Missouri Using High Precision Multi-Temporal Laser Scanning, Benjamin Michael Herries

Masters Theses

"A terrestrial laser scanning survey was conducted over the course of 1.5 years to test and validate a new target tracking method which characterizes the surface and subsurface behavior of soft slope landslides. Reflective spherical Styrofoam targets were mounted onto steel rods and driven into multiple levels of a landslide located in Stone County, Missouri. These targets were scanned a total of seventeen times over the course of the survey and were used as a proxy to measure the displacement of specific areas of the landslide. The three-dimensional point cloud data was processed through a software suite specifically developed to …

Imaging In Karst Terrain Using The Electrical Resistivity And Multichannel Analyses Of Surface Wave Methods, Ragab W. Jaafar

Masters Theses

"Electrical resistivity tomography and multi-channel analyses of surface waves data were acquired at a study area in Phelps County in the south-central part of Missouri. The objectives of the investigation were fourfold: 1) to image the subsurface in the study area to a depth of 70 feet; 2) to compare the ERT images generated using both the dipole-dipole and Wenner-Schlumberger arrays; and 3) to assess how variations in the MASW array configuration affected MASW data quality; and 4) to compare the ERT-estimated depth to top-of-rock and the MASW-generated depth to top-of-rock.

The subsurface in the study area was imaged to …

Mining Asteroids For Volatile Resources: An Experimental Demonstration Of Extraction And Recovery, Egboche Christopher Unobe

Masters Theses

"Gaseous compounds trapped within carbonaceous asteroids may prove to be important targets for prospective space miners in the near-term. Volatile release is from hydrated, hydroxylated and carbonated phases present, making such bodies attractive as feedstock for the production of H₂O, CO₂ and simple organic compounds. A source of these species in orbit provides an opportunity to locally produce space-craft propellant and other life-support gases through the application of In-situ Resource Utilization (ISRU).

For this study, an experimental vacuum system was modified and used to test the technical validity of radiatively heating asteroid simulants to extract contained gaseous …

Crustal Thickness And Vp/Vs Ratio Of Yellowstone, Eastern Snake River Plain, Wyoming Province, And The Northern Basin And Range Province Through Receiver Function Analysis, Avikant Dayma

Masters Theses

"For decades, numerous studies have been conducted and contradictory results were achieved about the origin and evolution of the Yellowstone supervolcano and the Eastern Snake River Plain. Whether the 640 km long time-progressive chain of rhyolitic calderas was formed due to mantle-plume or a result of lithospheric extension allowing the emergence of melt on the surface is still a debate. Using receiver function analyses, this study determines the crustal thickness and the Vp/Vs ratio below the Yellowstone Plateau, Wyoming Province (WP), Idaho Batholith (IB), Eastern Snake River Plain (ESRP), and the northern Basin and Range Province (BRP). The thickness is …

Cathodic Protection Measurement Through Inline Inspection Technology Uses And Observations, Briana Ley Ferguson

Masters Theses

"This research supports the evaluation of an impressed current cathodic protection (CP) system of a buried coated steel pipeline through alternative technology and methods, via an inline inspection device (ILI, CP ILI tool, or tool), in order to prevent and mitigate external corrosion. This thesis investigates the ability to measure the current density of a pipeline's CP system from inside of a pipeline rather than manually from outside, and then convert that CP ILI tool reading into a pipe-to-soil potential as required by regulations and standards. This was demonstrated through a mathematical model that utilizes applications of Ohm's Law, circuit …

Effect Of Fracture Heterogeneity On Proppant Transport And Settling Mechanism, Dhurgham Abdulameer Kadhim

Masters Theses

"Proppant transport modeling through fractures with slickwater fluid systems assumes uniform and homogeneous fracture widths by implying constant fluid behavior at wall boundaries. Hydraulic fracturing mineback operations have demonstrated that induced fractures are heterogeneous and varying in width. This work investigates the impact of fracture width heterogeneity, roughness, and leak-off on ceramic proppant transport and settling, using proppant distribution concepts of Equilibrium Dune Level (EDL) and equilibrium Dune Length (EDX). Experimental work was conducted to investigate the impact of fracture width heterogeneity by varying fracture width along two plexiglass sheets. To mimic actual hydraulic fractures, the injection side was designed …

Developing Restoration Schemes For A Road Transportation Network In The Event Of A Disaster, Ebin Antony

Masters Theses

"Transportation systems such as rail, road, and waterways are key component of critical infrastructure systems, providing connectivity between other components to enable the production and distribution of goods and services. During large scale disasters such as earth quakes and floods, this connectivity is disrupted, restricting or completely halting the flow of goods and services. To ensure that the connectivity between the different modes of transportation are restored in an aftermath of these disruptions, the interdependence between them and the importance of individual elements to the overall connectivity have to be studied and formulated to develop a system-level restoration plan. This …

Geomechanical Analysis Of The Wellbore Instability Problems In Nahr Umr Formation Southern Iraq, Haider Qasim Mohammed

Masters Theses

"Wellbore instability problems play a major rule of increasing nonproductive time (NPT) during drilling processes. In most cases, the cost of drilling a well can be reduced by designing a suitable operational window using geomechanical models. Several wellbore instability problems have been encountered during drilling Nahr Umr Formation in an oil field in southern Iraq. These problems include but are not limited to, mechanical stuck, caving, and tight holes. Data from twenty vertical wells are investigated to reveal the major factors that control the instability problems and to design an optimum mud window. A geomechanical model is developed to determine …

Depth Determination Method For A Trailer-Truck Test-Bed, Aditya Thakur

Masters Theses

"A camera is considered as a good sensing device to obtain visual information from its surrounding environment. In a three dimensional space, a camera has a two dimensional plane. Projection of an object on this plane creates a two dimensional projection and loses information of the third dimension. A single projection is not enough to retrieve the lost third dimensional information about the object. Thus it makes it difficult to use a single camera as a sensing instrument. In this project, we have developed a method that determines the three dimensional information using a single camera. The method utilizes an …

Nuclei Segmentation Using Level Set Method And Data Fusion For The Cin Classification, Ravali Edulapuram

Masters Theses

"This paper deals with the automation of the detection of the cervical cancer through histology images. This process is divided into two parts, corresponding to segmentation and data fusion. The segmentation and classification of the cervical epithelium images is done using hybrid image processing techniques. The digitized histology images provided have a pre-cervical cancer condition called cervical intraepithelial neoplasia (CIN) by expert pathologists. Previously, image analysis studies focused on nuclei-level features to classify the epithelium into the CIN grades. The current study focuses on nuclei segmentation based on the level set segmentation and fuzzy c-means clustering methods. Morphological post-processing operations …

Nuclei Segmentation Of Histology Images Based On Deep Learning And Color Quantization And Analysis Of Real World Pill Images, Sudhir Sornapudi

Masters Theses

"Medical image analysis has paved a way for research in the field of medical and biological image analysis through the applications of image processing. This study has special emphasis on nuclei segmentation from digitized histology images and pill segmentation. Cervical cancer is one of the most common malignant cancers affecting women. This can be cured if detected early. Histology image feature analysis is required to classify the squamous epithelium into Normal, CIN1, CIN2 and CIN3 grades of cervical intraepithelial neoplasia (CIN). The nuclei in the epithelium region provide the majority of information regarding the severity of the cancer. Segmentation of …

Detection Of Mine Roof Failure Using Inexpensive Lidar Technology, Ali Abdullah M. Alzahrani

Masters Theses

"Slope, Roof, and mine wall stability problems are some of the main reasons for deaths at U.S. surface or underground mining. The safety instruments were not enough to prevent that failure or even predict it before it occurs. However, the cost of such a tool that can be helpful in detecting roof failures is very high and not reachable in most instances.

The present study investigates the feasibility of using the M16 Leddar Evaluation Kit to detect the roof failure in mines. The M16 Leddar Evaluation kit cost is between 300$-800$, so it is the reachable price if it provides …

Bioaccessibility Of Lead From Lead-Contaminated Soil Upon Phosphate Amendment Using A Physiologically-Based Extraction Test, Samantha Jo Dicenso

Masters Theses

"Lead is known to cause health problems in humans, especially children, and an effective in‐situ remediation option has been sought for years. Adding phosphoric acid (PA) to contaminated soil causes a reaction that binds the lead to phosphate to produce pyromorphite (Pb₅(PO₄)₃Cl), a form of lead believed to be non‐bioavailable; however, field trials have given varied results (Bosso et al 2008; Munksgaard and Lottermoser 2011; Tang et al. 2009). One explanation for these results might be the impact of the agent used to raise pH after phosphoric acid addition. In order to examine this explanation soil was collected from the …

Cyber-Physical Manufacturing Cloud: An Efficient Method Of Building Digital Twin For 3d Printer By Adapting Mtconnect Protocol, Liwen Hu

Masters Theses

"The common modeling of a virtual machine is using an information model to describe the physics of machines. The integration of digital twins into productive cyber-physical cloud manufacturing (CPCM) systems imposes strict requirements such as reducing overhead and saving resources for the systems. In this paper, we investigate a new method for building cloud-based digital twins (CBDT), which can be adapted to the CPCM platform. Our method helps reduce computing resources in the processing center and guarantees the fastest speed of the interactions between the human users and physical machines. We introduce a knowledge resource center (KRC) built on a …

Combination Of Bmp-2 And Relaxin To Induce Osteogenesis In Vivo, Sahitya Injamuri

Masters Theses

"Bone grafts are a common procedure for treating craniofacial injuries such as trauma, surgery, and reconstruction. Autografts and allografts have limitations which encourages the use of synthetic bone grafts. While synthetic bone grafts, such as hydroxyapatite (HA) microspheres, are advantageous for their cost and reproducibility, they lack the cells and growth factors needed for proper osteoinduction. Bone morphogenetic protein-2 (BMP-2) has been shown to increase the osteoinduction of grafts but the effective dose is above physiological levels and causes undesired effects on the body. Relaxin has been shown to enhance BMP-2's ability to induce bone formation in vitro and thus …

Quantifying Ceramic Proppant Transport In Complex Fracture Networks, Vivekvardhan Reddy Kesireddy

Masters Theses

"Water fracs have become an essential part of unconventional reservoirs to create deeper fracture networks. Proppant transport in water fracs is challenging in terms of fluids ability to carry the proppant deeper into these fracture networks. This experimental study investigates the impact of the flow rates, fracture widths and complexity controlling the ability of proppant to flow into complex fracture networks. This research attempts to nullify the knowledge gap in understanding width heterogeneity in primary and secondary fractures. This study speaks for settling pattern and proppant transport through a slot flow model with a unique approach to understand stage wise …

Multiple Security Domain Nondeducibility Air Traffic Surveillance Systems, Anusha Thudimilla

Masters Theses

"Traditional security models partition the security universe into two distinct and completely separate worlds: high and low level. However, this partition is absolute and complete. The partition of security domains into high and low is too simplistic for more complex cyber-physical systems (CPS). Absolute divisions are conceptually clean, but they do not reflect the real world. Security partitions often overlap, frequently provide for the high level to have complete access to the low level, and are more complex than an impervious wall. The traditional models that handle situations where the security domains are complex or the threat space is ill …

Characterizing Groundwater Flow At Fort Leonard Wood Using Universal Cokriging With Trend Removal, Rachel Mae Uetrecht

Masters Theses

"Groundwater elevation interpolation is necessary for the prediction of groundwater flow direction and contaminant transport. Kriging is a geostatistical tool commonly used to interpolate groundwater elevation. Kriging requires a relatively large number of monitoring wells at the site of interest. The variogram model is a crucial element to the kriging equations. The variogram modelling process is an iterative procedure that is often very time consuming. This study presents a literature based approach that provides a point of departure for the variogram modelling process as well as other kriging parameters. A literature database is developed in order to provide insight and …

Evaluation Of Preformed Particle Gel As A Diverting Agent For Acidizing, Bo Wei

Masters Theses

"Preformed particle gels (PPGs) have been developed and successfully used to improve conformance in heterogeneous reservoirs. However, no research has been reported to show their potential diverting applications in acidizing because of their unknown performance in this process. This work targets on evaluating the potential of PPGs to be used as diverting agents and factors influencing the diverting performance.

The swelling properties of three types of PPGs (PPG #1, #2, and #3) were first studied in brine and acid, including the swelling kinetics and equilibrium, PPG strength, and deswelling performance. Effects of different brine concentration, acid concentration, and temperature were …

Sparse Emission Source Microscopy For Rapid Emission Source Imaging, Ling Zhang

Masters Theses

"In Paper I, Sparse Emission Source Microscopy (ESM) methodology will be introduced and discussed for the localization of major EMI radiation sources in complex and large systems. Traditional ESM method takes abundant and uniformly-distributed scanning points on the scanning plane using a robotic system, which can provide high-quality source images but consumes too much time. This section presents a sparse and nonuniform sampling technique for ESM, which is more time-efficient in identifying major radiation sources, even though the image quality is sacrificed. The feasibility of sparse sampling is mathematically proved, and it is shown that increasing number of points increases …

Processing And Properties Of Wc-Based Cu-Ni-Mn-Zn Metal Matrix Composites Produced Via Pressureless Infiltration, Paul M. Brune

Masters Theses

"This research focuses on the processing and properties of tungsten carbide-based (WC-based) Cu-Ni-Mn-Zn metal matrix composites (MMCs) fabricated by pressureless infiltration. The first goal of this project was to test the wettability of Cu-Ni-Mn and Cu-Ni-Mn-Zn on various carbides. The sessile drop technique was employed to determine if they were suitable candidates for pressureless infiltration. The carbides investigated were TaC, WC, B₄C, and SiC. It was determined that both alloys had contact angles of less than 70⁰ on TaC, WC, and B4C, which is one requirement for pressureless infiltration. However, both alloys reacted with B₄C to …

3d Bioprinting A Pcl/13-93b3 Glass Composite And Its Potential Use As A Bio-Ink, Caroline Blair Murphy

Masters Theses

"A major limitation of using synthetic scaffolds in tissue engineering is little growth of incorporated cells in the interior of the scaffold, resulting in insufficient angiogenesis in the scaffold interior. Recently, cells have been 3D bioprinted concurrently with biomaterials to produce a cellularized, bioactive, angiogenic 3D environment. This thesis describes a novel solvent-extrusion method for printing polycaprolactone (PCL)/bioactive borate glass composite as a biomaterial for a cell-laden scaffold.

Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste, creating scaffolds measuring 10×10×1 mm³ in overall dimensions with pore sizes ranging from …

Design And Modeling Of An Aluminum Smelting Process To Analyze Aluminum Smelter And Identify The Alternative Uses Of Nuclear Power Small Modular Reactor, Rajesh Ramkrushna Patharabe

Masters Theses

"This thesis focuses on design and analysis of an Aluminum Smelting process using computer simulation which performs a dynamic state computation. The objective is to develop a Dynamic Simulation Model of an Aluminum Smelter using Mimic Simulator to analyze the dynamic behavior of an Aluminum Smelter to evaluate strategies for alternative design or uses of Nuclear Power Small Modular Reactor to improve the efficiency of the process and to reduce the heat losses.

Increasing energy needs, decrease of the availability of cheap electricity and the need to reduce the greenhouse gases emissions are the biggest hurdles for running Aluminum smelters …