Digital Commons Network^™

“What Thyng It Is That Wommen Moost Desiren”: Image And Self-Realization In The Wife Of Bath's Prologue And Tale, Thomas W. Köhn

Masters Theses

The Wife of Bath is undoubtedly one of the most fascinating of the Canterbury pilgrims. At the same time she is one of those literary figures whose complex character constantly seems to elude the reader's judgement. Alisoun presents herself as a feminist advocating male subjection and female sovereignty in marriage, but her self-assertive behaviour cannot conceal an equally powerful longing for love and acceptance. Some critics therefore praise the psychological depth of the Wife's portrayal while others label her a stock character and join in the derisive laughter they believe her fellow pilgrims to bestow on her.

This thesis explores …

Some Potential Evolutionary Costs Associated With Paternal Care In The Water Bug Belostoma Flumineum Say, Larry Johnson

Masters Theses

Female water bugs (Belostoma flumineum) deposit eggs in a mucilaginous cement on the back of conspecific males, who then brood these eggs until hatching. Sex role reversal, in which females compete for males and males are discriminating, is predicted in this species because males provide parental care exclusively, and represent a limited resource. Presumably the advantage of this paternal behavior is increased survival of young. However, the potential exists for this egg-brooding behavior to incur evolutionary costs, and quantifying some of these costs was the thrust of this study.

One cost, a loss of polygynous opportunity, was investigated …

Perceptions Of Leaders And Non-Leaders On The Role Of Leadership And Leadership Training, Janice A. Holobowski

Masters Theses

The purpose of this study was to compare leader and non-leader attitudes regarding leadership training. This study states that there is significant differences among industry leaders, student leaders, and non-leaders with regard to the attitudes reflecting leadership and leadership training. A survey comprised of Likert scales, Likert-type scales, and open-ended questions was used to collect data. This data showed there was a significant difference in the expressed opinions of each group. The following conclusions were drawn: Industry and student leaders felt training was necessary to produce effective leaders; whereas, non-leaders seemed to remain neutral. Student leaders and non-leaders felt strongly …

The Development Of Eastern Illinois University's Beginning Teacher Induction Program, Beverly J. Ochs

Masters Theses

Throughout the nation programs are being developed that provide support for teachers in their initial years in the profession. Program philosophies emphasize the importance of beginning teachers experiencing a smooth transition from the preservice experiences or student teaching to becoming an employed classroom teacher.

Eastern Illiois University’s Beginning Teacher Induction Program is designed to provide free assistance and support to any Eastern graduate employed as a first or second year teacher in the State of Illinois.

Beginning teachers may receive individual assistance and support from university faculty. Professional consultation and services are provided to the teacher and his/her supervisor in …

The Understanding Of The Roles And Responsibilities Of The Administrators And Board Of Education Members In Schools In The Diocese Of Peoria, Dennis J. Smith

Masters Theses

Purpose

There are specific tasks which are assigned to the board of education and the administrator in policies adopted by the Commission on Education for the Catholic Diocese of Peoria. The purpose of this study was to discover how informed or uninformed administrators and board members in the Diocese of Peoria are in understanding their authority and responsibilities. Lack of understanding of the assigned roles may represent a need for in-service or training on role and responsibility clarification.

Procedure

Administrators and board/commission members completed a survey which identified baseline characteristics, revealed a perception of the working relationship between administrators and …

An Analysis Of William Lloyd Garrison’S Accusations Against The American Colonization Society, Peggy A. Mcgill

Masters Theses

This thesis analyzes the accusations made by William Lloyd Garrison, founder of the American Anti-Slavery Society, against the American Colonization Society. The charges were based upon his publication Thoughts on African Colonization published in 1832. In the book, he insisted that the Colonization Society fostered ineffectiveness, insincerity, and inconsistency. Because of the Society's ineptitude, he regarded it as a proslavery faction dedicated to racial segregation.

The paper will focus on two important questions. First, was the Colonization Society an antislavery organization? Second, was its objective to aid free blacks or to rid America of the black race.

From hindsight, it …

A.R.M.S., Arbitrary Robot Modeling System, William Richard Gerlt

Masters Theses

“This paper deals with the mathematical modeling of robot arms. Modeling robot arms includes finding a suitable way to describe a robot, turning the description into a mathematical system, and using the system to find a set of equations which can be used to control the robot.

One of the problems associated with robot modeling is that it involves a great deal of mathematics. When the process is done by hand, the large volume of mathematics makes the process very time consuming and prone to errors. These problems are part of the motivation for automating the modeling of robots.

ARMS …

A Gravity And Magnetic Study Of The Crooked Creek Cryptoexplosion Structure, Crawford County, Missouri, Charles Edward Woodbury

Masters Theses

"The pre-Pennsylvanian structure at Crooked Creek consists of a complex, vertically faulted ring of Cambrian and Ordovician sediments with a central uplifted core. The center of the structure is strongly deformed and contains shatter cones, brecciation, and other signs of extreme shock.

A magnetic low over the center of the structure suggests that igneous material was not involved in the formation of the structure, and this is corroborated by core analysis. Gravity data indicates several small gravity lows, possibly associated with areas of brecciation, circling the flanks of the structure. As in the magnetic data, there is no indication that …

Training For The Airland Battle With Modeling And Simulation On The Microcomputer, David Dean Holmes

Masters Theses

"This paper describes a methodology for modifying a combat training simulation model to include a comprehensive data structure and computer software, to allow the model to be implemented on a microcomputer. It begins by developing a topology for combat simulation models and proceeds to define a data structure suitable for describing military units and facilitating the varied aspects of the simulation. An eclectic approach to the development of the model and the implementing software is followed throughout. Appropriate aspects of a number of models are incorporated into a single model suitable for training military commanders and their staffs. PASCAL, a …

The Effect Of Excess Lead Oxide On The Sintering Characteristics And Dielectric Properties Of Lead Magnesium Niobate Ceramics, Dyllan Jye-Lun Hong

Masters Theses

"The effect of lead oxide additions on sintering characteristics and dielectric properties of ferroelectric Pb₃MgNb₂O₉ based capacitors was studied. The basic dielectric compositions were formed by solid state reaction. Densification was studied as a function of PbO content over the temperature range 900 °C to 1000 °C for sintering times one to six hours depending on the amount of additive, and the sintering temperature.

Weight loss, density and shrinkage measurements of each composition were made in order to relate the effects of the excess PbO additions on the densification. The dielectric and electrical properties were …

Design Of A Meta-Assembler For Microprogramming And A Survey Of Microprogram Optimization Techniques, Rahul Saxena

Masters Theses

"The purpose of this thesis is to develop and implement a meta-assembler for microprogramming. Different methods for optimizing microprogram execution and storage are also investigated.

The meta-assembler is of an adaptive type. It allows complete flexibility in the definition of the target machine op-codes and microinstruction field formats. The assembly process consists of two main phases. In the first phase the assembler builds a description of the target machine in terms of its microinstruction field format definitions. In the second phase the source program is assembled into object microcode. The assembler is written in the language Pascal. The assembler is …

Formability Of 356 Aluminum, Karol Krumrey Schrems

Masters Theses

"Although aluminum casting alloys are not often thought of as being formable, this thesis examines this possibility. Aluminum alloy 356 was cast in permanent molds and subsequently deformed by rolling (providing compressive loading) and bending (providing tensile loading). Cold forming was found to be very limited, while forming at elevated temperatures was comparatively easy and permitted reductions of up to 90%. Tensile properties and microstructures were examined in detail. Forming breaks up the eutectic silicon and intermetallic compounds. The yield strength and tensile strength increased almost linearly with increasing total percent reduction. The elongation at first increases with total percent …

Design Of Multivariable Deadbeat Controllers Using Reduced Order Models, Joaquin Alberto Zuniga

Masters Theses

"This study is concerned with the design of minimum Frobenius norm deadbeat controllers using reduced order models. Deadbeat controllers force the non-zero initial states of a linear multivariable discrete time system to the origin of the state space in minimum time. A controller of minimum Frobenius norm achieves such response with least effort.

The deadbeat controllers are designed on the basis of eigenspectrum assignment. In general, this approach permits a freedom in the selection of the closed-loop Jordan matrix which is used in the design of parametric controllers.

In this presentation, it is demonstrated that the task of deadbeat controller …

The Use Of Computerized Data Acquisition Techniques To Measure The Kinetics Of A Batch Flotation Process, Jose Antonio Barrera-Godinez

Masters Theses

"The flotation response of a lead ore was measured by utilization of a computer driven data acquisition system. A symmetric, fast and automatic froth removal and weighing system was attached to a conventional laboratory flotation cell. The rate controlling mechanisms were identified by manipulation of the froth removal rate, (FRR), froth layer thickness, (FT), and air flow rate, (AFR). The production of froth, water, solids and value in addition to value recovery and concentrate grade were determined as a function of time of flotation.

The flotation response was controlled by events dependent of AFR when using shallow froths of less …

Mechanical And Neutronic Properties Of Neutron Absorbing Materials, Donald James Buth

Masters Theses

“The primary neutron absorbing material examined in this project was Boraflex™, which consists of a silicone polymer with boron carbide acting as the neutron absorber. Two aluminum based neutron absorbers, Boral™ and Al-B-Ten, were also examined. Both X-ray and neutron radiography were used to examine the Boraflex™. The neutron radiography gave better resolution in detecting fluctuations in the boron carbide distribution; however, X-ray radiography did perform better in detecting flaws in the base material. Tensile tests were performed to determine the uniformity of Boraflex™'s tensile properties. The average tensile strength was calculated to be 303 ± 15 psi. A small …

A Proposed C Language Binding For The Graphical Kernel System-3d, Mark Gerard Bolten

Masters Theses

"This thesis introduces a proposed C language binding definition for the International Standards Organization's draft international standard of the Graphical Kernel System-3D. This work augments the earlier C language binding of the two dimensional version of the Graphical Kernel System commonly known as GKS. The proposed function interface will provide a basis for, if not a final, C language binding for the three dimensional version of the Graphical Kernel System"--Abstract, page ii.

Implementing An Mrp System In A Job Shop Environment, Kathleen A. Behnke

Masters Theses

"In today’s highly competitive marketplace, many small manufacturers are struggling to survive. The competition to produce a quality product at a competitive price comes not only from other small companies, but also from larger companies and foreign manufacturers, who have learned to produce in a more economical fashion. The challenge of the small manufacturer is learning to compete.

Every manufacturer, whether large or small, has one basic objective: to be profitable. The profit objective is usually achieved using a three part strategy of maximizing customer service, minimizing inventory investment, and maintaining efficient plant operation.

Small companies, including the one in …

Fluidized-Bed Gasifier Engine System Using Rice Hulls, Luis Cruz Baja

Masters Theses

"The operation of a fluidized-bed gasifier using rice hulls and a spark-ignition, internal combustion (IC) engine on product gas at the optimum reactor conditions and on gasoline produced generator loads of 6.7 KWe and 10.5 KWe at average speeds of 1740 RPM and 1785 RPM and thermal efficiencies of 12.7% and 13.8%, respectively. The diesel engine operation on dual diesel fuel oil (DFO) product gas and 100% DFO generated 8.0 KWe and 8.3 KWe at 1416 RPM and 1552 RPM and thermal efficiencies of 10.2% and 20.2% respectively. The gasoline engine could be run on 100% product gas while the …

The Synthesis And Characterization Of Polycarbonates Based On 1,1'-Dihydroxyethyl-2,2'-Biimidazole, Judith J. Garces

Masters Theses

"The synthesis of polycarbonates formed by the reaction of 1,1'-dihydroxyethyl-2,2'-biimidazole and diphenyl or diethyl carbonates was investigated and the products formed were characterized. The molecular weights of the polymers were dependent on catalyst, ratio of starting materials, nature of carbonate (aromatic or aliphatic) and method of polymerization. Isolated polymers exhibit a linear structure. They have no well-defined melting points (melting pt. range of 280- 330⁰C) indicating low degree of crystallization, and undergo less than 9% decomposition below 200⁰C"--Abstract, page ii.

The Interfacial Phenomena Of Liquid Copper Of Sapphire Substrates, Jenq Liu

Masters Theses

"The wetting behavior of liquid copper on the sapphire is effected by the crystallographic orientation of the solid surface, the oxygen partial pressure, and the temperature. Each of these influences has been studied by the sessile drop technique, over the oxygen partial pressure range from 10^-2 to 10^-20 atm at temperatures of 1373°K, and 1523°K. The effect of oxygen partial pressure on the liquid copper surface energy follows the Gibbs Langmuir Law.

The crystallographic orientation of the sapphire surface causes variations in the contact angle. This is more significant for higher oxygen partial pressure, but is eliminated at …

An Assessment Of Large Scale Battery Energy Storage For Industrial Loads, Brent Edward Mckinney

Masters Theses

"Reduction of peak demand on utility systems can be beneficial to both utilities and customers. One means of achieving peak demand reduction is by the use of load-leveling batteries. This thesis describes the technical and economic factors for demand side, customer-owned battery energy storage systems. The thesis has taken into account battery costs, converter and balance of plant costs, current utility rates, and customer load profiles typical of those for which battery storage may be feasible. Battery storage system designs and costs were described and quantified by using the results of EPRI project 1275-12. Utilities in the midwest were selected …

Effect Of Proximal Thermal/Pressure Cutaneous Stimulation On The Discomfort Of Intramuscular Injection, Michael Edward Desrocher

Masters Theses

The discomfort from receiving an intramuscular injection is pain that may be reduced by proper nursing intervention if the gate control theory is applied. A group of 71 adult preoperative patients were randomly assigned to control and experimental groups. The experimental group received a warm (43.5{dollar}\sp\circ{dollar}C), 800 gram pack proximal to the site of injection. The control and experimental group scores were compared using a Mann-Whitney U test of significance for the intervention. The intervention was not significant in reducing the discomfort from an intramuscular injection at the.05 level.

The Relationship Between Role Supplementation And The Level Of Marital Functioning In Couples Living With Cardiac Disease, Laurie Ann Demull-Bok

Masters Theses

Eighteen couples experiencing the onset of heart disease (Myocardial Infarction or Coronary Artery Bypass Graft procedure) participated in this study. Nine couples participated in a role supplementation program consisting of role modeling and role discussion. Role modeling was facilitated by exposure to a role model couple in a group situation. The role discussion component utilized a tool that allowed each partner to identify his/her responsibility for the treatment plan.;The hypothesis of the study was that couples who participated in a role supplementation program would have a higher level of marital functioning than couples who did not participate in role supplementation. …

The Relationship Between Functional Disability Of Chronic Low Back Pain To Depression, Janice Ellen Looman

Masters Theses

This study is proposed for the purpose of determining if a relationship exists between the functional disability of chronic low back pain (LBP) to depression. In the investigation a random sample of 40-50 clients from area back clinics, at Blodgett Memorial Medical Center and Butterworth Hospital will be selected. The clients who have had LBP over six months will be asked to take a modified Dartmouth Pain Questionnaire (DPQ) and the Beck Depression Inventory (BDI). The modified DPQ includes two parts relating to the client's self perception and activity level prior to the LBP event. The self-administered BDI which measures …

Effect Of Nurse's Attire On Patients' Perceptions Of Trustworthiness, Marcia Diane Westrate

Masters Theses

This descriptive study was an investigation of the difference in patients' perceptions of trustworthiness in the nurse based on the nurse's attire. Eighty-nine men and women who presented to emergency departments in three West Michigan hospitals for treatment of non-acute illnesses or injuries completed a Trust Perception Questionnaire before being seen for treatment. Subjects were shown one of three photographs of the same nurse model in different nursing attire and were directed to choose statements concerning elements of trust that applied to the person in the photograph. Analysis of variance performed on data indicated a significant difference (F(2, 86) = …

Multilist And Inverted File System Performance Measurements, Ashok Chandramouli

Masters Theses

"This study evaluates the multilist and inverted file systems. It describes the structure of the two file system and then proceeds to investigate the performance. The performance is based on quantitative estimates of space requirements for file system, time to retrieve records, time to insert a record, time to delete a record, time to update a record and time to exhaustively read and reorganize the file system. The study then investigates specific situations in which one file system seems to perform better than the other"--Abstract, page ii.

An Apparatus For The Measurement Of Dc Electrical Conductivity And Seebeck Coefficient Of Semiconductors As A Function Of High Temperature And Oxygen Partial Pressure, George Francis Carini Ii

Masters Theses

"A computer controlled apparatus for the measurement of dc electrical conductivity and Seebeck coefficient as a function of temperature and oxygen partial pressure has been developed. Thermocouples are in electrical and thermal contact with the ends of the specimen bar. This allows both Seebeck and four-wire electrical conductivity measurements to be made in situ. Environmental enclosure of the specimen allows measurements over a range of oxygen activities from 1 to 10^-18 atm. A discussion of the measuring technique with schematics of the apparatus and data retrieval system is made. Results for measurements in selected oxide ceramics are compared to …

The Development Of Glass-Ceramic Matrix Composites And The Crystallization Of Two Glass-Ceramic Matrices, William M. Carty

Masters Theses

"In order to develop ceramic matrix composites for high temperature applications, two glass-ceramic matrices, one an yttrium aluminosilicate (YAS), the other a magnesium aluminosilicate (cordierite), were chosen as possible matrix compositions. Two separate sets of experiments were performed. Specimens were hot pressed and heat treated then analyzed for the crystallization products and C.T.E. Specimens were also prepared containing commercially available ceramic fibers and coated ceramic fibers to investigate fiber/matrix interactions and the effect of fiber additions on the crystallization of the glass matrices. DTA was employed to approximate the crystallization temperature of the glasses and to determine the effect of …

Glass Fiber Reinforced Polycarbonate Composites, Wen Ching Hu

Masters Theses

"The purpose of this work was to develop a transparent glass fiber reinforced polymer composite material which is superior to the transparent unreinforced thermoplastic in mechanical properties but similar in optical clarity. Polycarbonate matrix composite specimens containing 0 to 40 wt% SK-12 glass fiber were studied, with mechanical and optical properties determined as a function of glass fiber content. The mechanical properties -- flexural strength and elastic modulus increased with increasing glass fiber content. The optical properties -- transmission and transparency decreased with increasing glass fiber content. The factors which influence the mechanical and optical properties were investigated"--Abstract, page ii.

Characterization Of The Fluid-Dynamic Mixing Of A Bottom Gas-Injected Channel Reactor Using Low-Temperature Modelling, Jay Bernett Gassel

Masters Theses

"Variables influencing the mixing in a single-phase (30.5 x 60 x 606 cm) and a two-phase (20 x 40 x 200 cm) channel reactor model were studied. Tracer and/or neutral density particle techniques were used to determine an eddy diffusivity, De, for the system(s). Three bubbler arrangements were investigated in the one-phase work. A separate apparatus was developed to withstand the corrosiveness of the tetrachloroethylene used in the two-phase work.

Both the electrical conductivity tracer technique and the neutral density particle technique were shown to be feasible experimental techniques for determining an eddy diffusivity in the systems studied. Decreasing liquid …