Digital Commons Network^™

Analyses Of Two New Electrode Configurations For Earth Resistivity Surveying, Chi-Chao Chang

Masters Theses

"Two new electrode configurations for the electrical resistivity- surveying are introduced: the A-configuration, consisting of a closely spaced pair of current electrodes separated at larger distance from the closely spaced pair of potential electrodes, and the B-configuration, in which each closely spaced pair consists both current and potential electrode. Because electrode pairs can be carried as units, the new configurations can be applied to continuous resistivity surveying more easily than the Wenner configuration....

Theoretical apparent resistivity values are derived, by Maxwell's theory of images, for the A- and B-configuration over a two layered earth using the depth probe method, and …

Design Of A Square Loop Magnetic Integrating Device, Fred Leland Grismore Jr.

Masters Theses

"The problem investigated in this research was the development of a static integrating circuit applicable to closed loop feedback control systems. Investigation of various methods of attack indicated that square loop magnetic cores offered characteristics required for the integration process. These include the ability to sum input information and the ability to store information for an indefinite period of time.

An experimental program was carried out, investigating the various properties of square loop magnetic materials and required design parameters. Through this work it was verified that the process of integration could be realized by using the partial switching volt-second absorption …

A Study Of The Energy Dissipation And The Related Pressures And Velocities Of Cylindrical Tank Type Stilling Basin, Graham Wayne Wood

Masters Theses

"In all hydraulic structures that hold back water, whether for the purpose of power, irrigation or flood control, all must have some means of dissipating the energy that is produced by the movement of the water from the pond or reservoir to the tailrace. The method of dissipation depends largely on downstream conditions, terrain and economics. The dissipator is to prevent scour and the undermining of the dam itself. The construction of any type dissipator should be the best one available for the least cost of construction. However, space limitations may dictate another type of dissipator. It has been recommended …

Normal Incidence - Grazing Incidence Spectrograph For The Vacuum Ultraviolet, J. Kirston Henderson

Masters Theses

"Presentation of Design.

This thesis presents the design for a combination normal incidence - grazing incidence spectrograph for use in the vacuum ultra-violet and soft x-ray portions of the electromagnetic spectrum. The instrument described was designed and constructed as a partial fulfillment of the requirements for the master of science degree from The Missouri School of Mines and Metallurgy.

Design Details.

Included in this thesis is a complete set of all detailed drawings and information required for either effective use or duplication of this instrument. Complete discussions of the design, operating procedures, difficulties encountered during construction and suggestions for future …

An Investigation Of The Factors Influencing The Design Of A Dense Prilled Ammonium Nitrate-Fuel Oil Mixture, Robert Bartley Hopler Jr.

Masters Theses

"The physical characteristics of dense ammonium nitrate prills were examined. The density was found to be 1.52 grams per cubic centimeter, and from this the specific surface was calculated for the size fractions of interest in the investigation. Theoretical loading densities were calculated for between 26.0 and 47.6 percent voids.

The explosive properties of discrete particle size fractions were investigated. The equation by Clark was found to predict the detonation velocity of the sizes smaller than 8/20 mesh. The equation by Cook could not be applied to dense prilled ammonium nitrate. The possibility of a very oxygen negative condition existing …

Certain Features Of Alteration In The Michigan Lavas And Their Genetic Interpretation, Peethambaram Doraibabu

Masters Theses

"The origin of the alteration and copper mineralization in the Keweenawan lavas of the Upper Peninsula of Michigan is one of the well known controversial topics in Economic Geology. The literature on this problem is most extensive and an attempt was made in this thesis to first review as many aspects of the discussion as appeared to be necessary. This portion is necessarily extensive, and it is hoped that some new light has been thrown here on some patterns of approach or thought which, today, can hardly be called scientific.

Next, the observations made in the field, on hand specimens …

Explosive Performance Parameters: A Digital Computer Solution And Error Analysis, Robert T. Stelloh

Masters Theses

"A program was written for the determination of explosive performance parameters on the Royal-McBee LGP-30 electronic digital computer. The method developed by Dr. M. A. Cook was used, which is based on the thermohydrodynamic theory of detonation. This theory and the specific equations developed by Cook are presented.

General statements are made in regard to computer programming, and specific information given concerning the programming concepts used for this particular problem. A detailed explanation of the program operation is given, together with the tabular data required for its use.

Equations are presented for an analysis of the effects of roundoff error …

Scatter Matrix Analysis Of Plane Waves In A Layered Media, Bill W. Ashworth

Masters Theses

"The problem was the application of matrix theory to the solution of the reflection and transmission coefficients for a plane wave incident on a layered media. Background material relating to the problem was reviewed. Equations that were used in the solution of the problem were either derived or explained. The derivations for the reflection and transmission coefficients were carried out in order, starting with the simple case of normal incidence on a junction of two infinite media and progressing through the more difficult case of oblique incidence on a layer of finite thickness separating two infinite media. Scatter matrix analysis …

The Effects Of Sulphur And Copper On Hot-Workability Of Pure Iron, Hung-Chi Chao

Masters Theses

"The independent effects of sulphur, copper and their combinations on the hot-workability of pure iron free from other elements was studied, with special emphasis on the red-short phenomenon. Electrolytic pure iron with the addition of 0.023 cent sulphur, 0.33 per cent copper and 0.024 per cent sulphur plus 0.032 per cent copper along with a heat of only electrolytic pure iron was melted under vacuum, and cast under helium pressure. The specimens machined from the forged bars were tested at various temperatures by the hot twist-test and by the constant energy single blow drop forging test to evaluate the hot-workability …

Certain Trace Element Distribution In The Searchlight, Nevada Quartz Monzonite, Clark County, Nevada, Jai Nandan Shrivastava

Masters Theses

"The once prosperous gold, silver, copper and lead mines of the Searchlight mining district, Nevada, are situated along the south and western margins of a large quartz monzonite body. This intrudes the Precambrian gneisses and younger lava flows. Associated mineral veins show an eccentric type of zoning around the intrusive.

Seven rock samples of the quartz monzonite representing different parts of the intrusive were analyzed petrographically and spectrographically. Modal analyses and various types of rock alteration were investigated petrographically. Spectrochemical analyses of the rock samples and their major minerals were carried out for certain trace elements. A semi-quantitative method was …

An Evaluation Of The Addition Of Magnesium Carbonate To Promote Collapsibility In Sodium Silicate Bonded Cores, Wilfred Durairajan Paul

Masters Theses

"Cores are separate sand masses included in the mold to accomplish shapes that would be impossible or difficult to obtain with a normal simple mold cavity.

For example a core made for a pipe casting is expected, first, to support itself when placed in the mold and also withstand handling at room temperature. Second, it should withstand, for a short time, the high temperature of molten metal. Last, it should possess the ability, to completely lose its strength just after the metal around it has completely solidified.

Until recently cores for castings were made using oil bonded sands, with an …

Effects Of Solids On Friction Factor In A Sand-Water Mixture, Frank J. Capek

Masters Theses

"At the present time various industries in both the United States and Europe are very interested in using pipelines as a means of transporting solids. The pumping of solids in pipelines isn't new, however, many of the pipelines in use today were constructed on an empirical basis. This is primarily due to the lack of knowledge concerning the flow properties in fluid-solid mixtures and slurries. With this need for fundamental information in mind, the author made a study on the effect solids have on the friction factor in fluid-solid mixtures.

In this paper various percentages of fine and coarse sand …

Sedimentary Features And Geochemistry Of The Sulphide Facies In The Transition Between The Lamotte Sandstone And The Bonneterre Formation In The Fredericktown Area, Madison County, Missouri, Farouk El Baz

Masters Theses

"SCOPE AND PURPOSE The Lead Belt area of southeast Missouri, which is nearly 40 km. long and 10 km. wide, is considered, at the present time, the most important lead district in the world. Lead has been mined in this area by the natives prior to 1720, and almost continuously up to the present day. A variety of sulphides are mined from different places in the district.

The sulphide deposits in the Lead Belt are considered to be typical examples of the Mississippi Valley Type Deposits, which are distributed all over the world. As in practically all the Mississippi Valley …

A Study Of Viscous Frictional Effects And Relay Characteristics On The Operation Of A Positional Relay Servomechanism, Earl F. Richards

Masters Theses

"The thesis describes some experimentally observed data and analytical approaches to the study of a relay servomechanism. The experimental data were secured from an analog simulation of a relay servo system. The results of this data were compared to the transient approach by use of the phase-plane method. The stability of the system was determined using a describing-function. The analytical approaches are described in the presentation.

A study of the effects of viscous friction is described, and the characteristic of the relay used in the system is given special attention. The response to input driving function was considered, and rise …

A Study Of Invert Emulsion Drilling Fluids, Edward R. Tegland

Masters Theses

"Since invert emulsions are being applied as drilling fluids to cope with special drilling and completion problems, evaluations of existing and new types of emulsions are needed. Three types of emulsions are evaluated in this study: (1) type A emulsions prepared with a commercial emulsifier, (2) type B emulsions prepared by adding clay to the external phase, and (3) type C emulsions containing no externally added emulsifier.

Standard testing procedures were used to measure the viscosity and filtration properties of the emulsions studied. Interfacial tension measurements were made using a technique described in the literature. The degree of stability for …

Transient Temperature Distribution In An Infinite Plate Subjected To Convection And Radiation Heat Exchange, Billy W. Marshall

Masters Theses

"The desired result of this paper is a method of calculating transient temperatures in an infinite plate. The resulting equations are general to the extent possible for aerodynamic heating and radiation boundary conditions. The possible methods of calculation were investigated, and it was felt that a numerical analysis presented the most feasible approach.

Numerical analysis was employed to arrive at a series of equations for calculating the temperatures at selected positions in an infinite plate. A study was then made to determine a method of solving these equations by means of some high speed computing device.

The equations were adapted …

Correlation Of Dust-Count Results By Zeiss Konimeter And Midget Impinger, Chandmal Jain

Masters Theses

"In this modern age, the scientific and technological developments have advanced mechanized mining to the status wherein the attendant dust problems have reached very serious hazard proportions. The significant roles, which have been perfected for the Zeiss konimeter and the midget impinger, in evaluating dust concentrations and thereby revealing possible improvements in making the atmospheric conditions safer, cannot be over emphasized.

While introducing the subject of this paper in the first chapter, the author has presented a historical resume, wherein he pointed out that performances of these instruments have not been correlated in the past. However, the work reported on …

A Systematic Study Of Experimental Parameters In A Cloud Chamber Search For Subionizers, Zin Aung

Masters Theses

"Since there is no theoretical basis for the quantization of electric charge, it is reasonable to consider the possible existence of particles with charges much less than the electronic charge ‘e’. Such particles, if they exist, are expected to ionize more lightly than the electron. Similar remarks hold true for particles with electric dipole moments, and relativistic monopoles with strengths much less than ’e’ electrostatic units. These particles have been termed subionizers.

The selection of apparatus for a subionizer search has been discussed. The desired conditions for such a search using a low background, long sensitive time Wilson cloud chamber …

Temperature Distribution In An Infinite Plate As A Function Of The Input Heat Flux, George Franklin Wright

Masters Theses

"It is the purpose of this thesis to investigate the effects of a variable input heat flux impinging equally on both sides, on the temperature distribution within an infinite plate. An infinite plate may be defined as one in which the dimensions are infinite in two directions and finite in thickness. For practical purposes such a plate could be thought of as one in which the thickness was small enough, compared to the other two dimensions, so that a temperature gradient exists only normal to the surfaces of the plate. This assumption will be made to establish one-dimensional heat flow …

The Relationship Between Achievement And Laboratory Work In High-School Physics, Herbert W. Richter

Masters Theses

Chapter I

The Problem and Its Background

The Purpose of the Study

The teaching of physics in the high school has been modified over the years to meet the changing needs of students and to include the developments of modern times. Together with these changes there has been in recent years much controversy concerning the purpose and value of laboratory work that accompanies the course. The purpose of this study is to investigate the relationship between achievement in high-school physics and the amount of laboratory work that may be included.

A Follow-Up Study Of Industrial Technology Graduates From Western Michigan University, Dale Donald King

Masters Theses

Chapter I

The Problem and Its Setting

During the past few years, nationally prominent industrial and educational leaders have been concerned with the present shortages of engineers and technically trained personnel. These leaders appear to be concerned with the utilization of manpower and in present and future educational patterns which will insure an ample supply of technically competent personnel.¹

Staff members of Western Michigan University are also concerned with the technician. In fact, 243 students were graduated from thirteen Industrial Technology curriculums during the period of 1955 through 1959. It is believed that the school has been effective in …

A Follow-Up Study Of Western Michigan University Graduates With Majors In Industrial Arts, Richard Duane Murphy

Masters Theses

Chapter I

Introduction

One of the major premises of education is that programs must be constantly exposed to evaluation. One of the means implementing such evaluation is the use of a follow-up study. By using the results of such a study, the institution can keep its program in step with the best educational theory and practice.

Segregation Method As Possible Process To Beneficiate Oxidized Lead Ores, Jose Molfino Tomasio

Masters Theses

"In this investigation it has been demonstrated that the Segregation Process has merit for treating oxidized lead ores.

The process comprises heating the crushed ore with salt and coal at about 750° C. to produce metallic lead attached to the carbon particles, which then is recovered by conventional flotation methods.

The quantities of sodium chloride and coal required for the best segregation of lead obtained in this work was 1.0 percent of coal and 1.0 percent of salt by weight.

Good segregation was obtained by using salt and coal as fine as 65 or 48 mesh. Segregation varied with the …

Effect Of Leaching On The Strength Properties Of A Hydrated Lime-Cement Stabilized Soil., Yurdakul Osman Ulugonul

Masters Theses

"The stabilization of soil has been carried on since early historic times. The Romans used lime and volcanic ash as additives for this purpose. After the discovery of cement and its property of bonding soil particles it became one of the essential additives in the soil stabilization field. Many other kinds of additives have been developed and are being used today for soil stabilization.

A question that arises through the increasing use of stabilizers in soil is whether the changes that are effected are of a temporary or permanent nature. Changes may occur from the degradation of the stabilized soil …

Deflections Of Two-Way Slabs, Gerald C. Godzwon

Masters Theses

"A reinforced concrete member is by no means a truly elastic member, hence all ordinary deflection calculations relating to it, whichever method, are approximate. By the use of model study actual reinforced concrete slab models, of different end conditions, were built and tested for deflections under uniform loadings. Theoretical and actual deflection of reinforced concrete slabs are compared. The results of these tests indicate that the theoretical deflection equations may be 60 to 80 percent in error when applied to reinforced concrete slabs"--Abstract, page 2.

Some Dynamic Creep Characteristics Of Gypsum, Ikram-Ul-Haq Dar

Masters Theses

"A review of literature concerned with time-dependent deformation of geologic and non-geologic materials is presented. A static loading machine and a four unit dynamic loading unit was designed and assembled to evaluate static and dynamic creep properties of gypsum. The tests were run for various levels of static loads, and superimposed dynamic loads. Investigations were carried out to determine the relationships, if any, between impact energy, impact velocity and momentum, and dynamic strains. Viscoelastic coefficients were determined for the investigations. The conclusion was presented that time-dependent strain in the dynamic creep tests of the particular gypsum rock tested is a …

Heat Transfer In A Vortex Flow Metal To Air, Elisha Rachovitsky

Masters Theses

"In this study heat transfer in a vortex flow has been investigated experimentally and analyzed qualitatively.

Air was forced through a Ranque tube in order to get a swirling turbulent flow in its "hot" section. The test section, having a diameter of .355 inches and a length of 27.5 inches, was heated by an induction coil.

Three types of flow were under investigation: a linear turbulent flow, a vortex uniflow and a mixed vortex-linear turbulent flow.

The experiments covered a range of tube-wall temperature from 570 to 900 Deg. R and inlet pressure to the vortex generator ranged from 25 …

Methods For Calculating The Minimum Amortization Tonnage And Maximum Present Value For An Ore Body, Garrett M. Sainsbury

Masters Theses

"The discussion is divided into three parts. Part I describes a procedure for determining the mining rate that gives the minimum amortization tonnage required of an ore body, and the amount of that tonnage. The basic idea is that amortization tonnage is equivalent to the estimated capital costs, including interest, divided by the estimated operating profit per ton. Both capital costs and operating profit per ton can be expressed as functions of mining rate by making use of empirical equations. Therefore, amortization tonnage can be expressed as a function of mining rate. The amortization tonnage is calculated for a series …

The Redesign And Construction Of A Rotating Disc Contactor, Richard Henry Okenfuss

Masters Theses

"Liquid-liquid extraction has played a major role in the processing of nuclear fuels. The Department of Chemical Engineering of the Missouri School of Mines and Metallurgy realizing this, petitioned the Atomic Energy Commission for funds to design and construct an instructional facility representing the chemical processing of nuclear fuels. With this unit and its solvent recovery equipment, in which stress is placed on extraction and distillation, not only are the principles of nuclear fuels processing demonstrated, but the more basic concepts of mass and energy transfer are also illustrated. Extraction depends upon solubility differences to achieve a transfer of a …

Determination Of Vapor-Liquid Equilibrium Data By Continuous Distillation, David William Bunch

Masters Theses

"The procuring of experimental vapor-liquid equilibrium data has been a problem of considerable importance to chemical engineers for a number of years. Modern distillation theory and practice have made accurate vapor-liquid equilibrium data practically a necessity.

Using conventional methods for determining vapor-liquid equilibrium data, an experimenter can obtain only a single vapor-liquid equilibrium composition per trial. Ramalho working with Tiller has developed a new method which makes possible the determination of all values of the vapor and liquid concentrations in a single experiment.

The work done by Ramalho indicated that the necessity for very precise temperature measurements presented a serious …