Digital Commons Network^™

Boom To Bankruptcy The Story Of The Manistee And Northeastern Railroad, Donald Stroup

Masters Theses

No abstract provided.

Effect Of Calcium Lignosulfonate On Properties Of Concrete At Early Ages, Lawrence Kong-Pu Wang

Masters Theses

"The objective of this investigation was to determine the effects of calcium lignosulfonate on the physical properties of concrete. Calcium lignosulfonate used as an admixture was tested for its effect on the tensile and compressive strength of plain concrete cylinders, and for its effect on the flexural strength of plain concrete beams. The effect of the admixture on shrinkage, slump, air content and unit weight was also studied. the test results showed that calcium lignosulfonate reduces the amount of water required to make a workable concrete mix; a more workable mix saves money because it is easier to place, thus …

Solid Solubility Of Sulfur, Selenium, And Tellurium In Molybdenum At 1100°C, Lattice Constants Thermal Expansion Coefficients, And Densities Of Molybdenum And The Molybdenum-Base Alloys, Ramesh Purushottamdas Shodhan

Masters Theses

"With the ever increasing requirement for engineering materials having adequate mechanical properties at ever higher temperatures there has been, in quite recent years, a considerable increase in the study of molybdenum and molybdenum-rich alloys. Since 1945 extensive information on the engineering properties of molybdenum and molybdenum-base alloys has gradually become more available ... The present work involves the determination of solid solubility of elements with large atoms such as sulfur, selenium, and tellurium in molybdenum at 1100°C using the parametric method. Furthermore, the thermal expansion coefficients of pure molybdenum and of molybdenum-base solid solutions containing the elements just mentioned were …

Discharge Characteristics Of Side Weirs, Edgar Snowden

Masters Theses

"The purpose of this study is to investigate the division of flow of water in a flume of rectangular cross-section when the flume is provided with a side weir. An equation has been derived so that the quantity of water flowing over the side weir compared to the quantity of water flowing in the main channel can be predicted. This ratio is acceptable only within the ranges of heads, velocities, and weir lengths imposed by the geometry of the system tested"--Abstract, page ii.

An Instrument For The Measurement Of Anelastic Properties Of Glass, Thomas Frederick Miller

Masters Theses

"An inverted torsion pendulum for measuring the internal friction and dynamic shear modulus of glass fibers over an extended temperature range has been constructed and calibrated. The calibration consists of the determination of the moment of inertia. Extraneous damping losses were investigated and primary sources were found to be (1) the suspension thread, (2) the method of securing the fiber and (3) air damping. Anelastic measurements were made on an annealed vitreous silica fiber and a soda-lime-silica fiber"--Abstract, page ii.

Detection Of Stress Corrosion Cracking In U-Bend Brass Specimens By An Electro-Mechanical Method, Floyd Elwin Loftin

Masters Theses

"An apparatus was designed and built which held two u-bend specimens. When the specimens were exposed to a corrodent, losses in strength were detected as a result of stress corrosion cracking. The apparatus was used to study time to failure of cartridge brass u-bend specimens exposed to ammoniacal copper sulfate solutions which varied in pH. A minimum time to failure, 1.06 hours, was detected at pH 7.2. The maximum time to failure, for the range studied, was 28.36 hours at pH 7.7.

No useful data were obtained in the range from pH 6.6 - 6.8. thick, black surface coatings were …

The Geology Of The Interstate Highway 244 And 44 Exchange, Kirkwood, Missouri, John Neil Thomas

Masters Theses

"During the summer of 1964, construction was completed on the intersection of Interstate Highways 244, 44 and U.S. Highway 66, one mile southwest of Kirkwood, Missouri. during the construction of the interchange, numerous artificial exposures of rocks of the middle Mississippian Meramecian Series were exposed. This provided an excellent opportunity for examining fresh exposures near the type Meramecian Series. The formations of the area were studied, and startigraphic [sic] sections were prepared from three of the more complete sections that were measured and described. The highway cuts expose complete sections of the Warsaw and Salem formations, and the lower part …

Thin Film Resistor Deposition, Rollie R. Herzog

Masters Theses

"Thin film techniques may be the key to future miniaturization of electrical equipment. The purpose of this thesis was to develop procedures for deposition of thin film resistors and to test these deposited resistors. Starting with a vacuum system, equipment was designed and built to hold and heat the substrate, monitor the substrate temperature and deposited resistance, and to evaporate the material to be deposited. Resistors were deposited and tested for resistance between resistors, capacitance between resistors, and resistance of resistors. A heat aging test was also used comparing resistors with and without a silicon monoxide coating"--Abstract, page ii.

The Design Of A Sensitive Probe For Mass Flux Measurements Of Water Vapor In Air, Devendra Vaikunthlal Mehta

Masters Theses

"This investigation pertains to the construction and investigation of a sensitive probe to determine the possibility of measuring the mass flux of water vapor in air under non-flow steady state conditions. The probe was a small electrolysis cell is which the electrolyte (partially hydrated phosphorus pentoxide) was used as the sensing element. The rate of mass transfer was determined by measuring the amount of direct current flowing through the acid film"--Abstract, page i.

The Effect Of Cadmium On Anaerobic Digestion, Lyle Lynn Pruitt

Masters Theses

"The main purpose of this study was to determine the effect of cadmium on anaerobic digestion. Metal concentrations in the form of regular and slug doses were considered. The possibility of acclimating anaerobic bacteria to higher cadmium levels was studied, and attempts were made to reestablish digestive action through re-seeding in digesters overcome by high cadmium concentrations"--Abstract, page [ii].

Transient Temperature Distribution In A Finite Cylinder And An Infinite Cylinder Subjected To Some Boundary Conditions, Harng-Sen Huang

Masters Theses

"This thesis is concerned with the theoretical heat transfer analysis of solid cylinders. The first problem considered is the transient temperature distribution in a finite cylinder. This cylinder has a uniform initial temperature and a uniform constant surrounding temperature. This case is solved by the separation of variables. Combining the charts for the infinite cylinder and the charts for the infinite plate one can determine the solution to this case easily. If a uniform constant surface temperature is prescribed instead of a surrounding temperature, the solution can be obtained from the previous one by charging the Nusselt number to infinity. …

The Effect Of Submerged Jets On The Hydraulic Jump, Harvey E. Jobson

Masters Theses

"Tests were performed in order to determine the effects of forcing submerged jets of water into the base of a hydraulic jump. The specific energy of the water leaving the hydraulic jump, the length and the wave formation properties of the jump which had been modified by the introduction of submerged jets were determined and compared with the same characteristics of a normal hydraulic jump and a hydraulic jump which had been modified by the use of baffle piers.

Test results indicate: (a) the quantity of water flowing through the submerged jets is a primary factor in determining the specific …

The Anodic Dissolution Of Cadmium In Nitrate Solution, Eh Deng

Masters Theses

"It is only relatively recently that the immensity of the problem of corrosion prevention has begun to be realized. In times when materials were plentiful, the problem did not seem so pressing. Now that a finite limit can be seen for the world*s resources of metals, and the cost of finding, mining and extracting them has become ever more expensive, the problem of controlling the destructive processes of corrosion has become an urgent one.

The basic mechanism of the anodic dissolution of metals such as cadmium, zinc, silver and magnesium in salt solutions is not completely known. Although several mechanisms …

A Study Of Certain Conservative Sets For Parameters In The Linear Statistical Model, Roger Alan Chapin

Masters Theses

"In the case of the linear statistical model, it has been shown that under certain conditions the confidence intervals obtained by considering the parameters one at a time are conservative when used as a joint confidence region, using the product of confidences as the confidence. However, nothing had been known of how conservative they are. This research provides accurate estimates of the true confidence for these cases.

Also, it has not yet been proved that they are indeed conservative for all cases. It is thought that they are, and the results of this research support this conjecture"--Abstract, page ii.

Zinc And Copper Content Of Stream Sediment In South-Central Missouri, Shih-Cheang Cheng

Masters Theses

"Thirty samples of stream sediment from the North Fork River, Bryant Creek and related tributaries in south-central Missouri have been analyzed for cold-extractable copper, cold-extractable heavy metal, total copper and total zinc.

Cold-extractable copper varies from 0 to 10 ppm and averages less than 1 ppm; cold-extractable heavy metal varies from 3 to 30 ppm and averages 12 ppm; total copper varies from 50 to 200 ppm and averages 88 ppm; total zinc varies from 20 to 300 ppm and averages 86 ppm.

The pH of the stream water appears to have no affect on the metal content of the …

The Eccentric Orifice As A Flow Measuring Device In Small Diameter Pipes, James E. Casale

Masters Theses

"This thesis reports and evaluates the use of an eccentrically placed orifice as a flow measuring device in small pipe sizes. The orifice is placed in a concentric location and moved to increasingly eccentric locations until full eccentricity is reached. At full eccentricity the circumference of the orifice is tangent to the circumference of the pipe. The effects of increasing eccentricity are evaluated for four orifices...Flow coefficients for the orifices in different locations are plotted against Reynolds numbers. The eccentric orifice is a reliable, accurate flow measuring device for metering or controlling the flow of fluids. Design criteria can be …

Active Band-Pass Filters Using Twin-Tee Networks, Terry B. Watson

Masters Theses

"The primary objective of this thesis was the design and construction of a set of filters to determine the spectral energy density of random signal data in the spectrum from 10 cps to 20 kcps. The statement of the problem placed rather exacting conditions on the cost and performance of the equipment, and these conditions were met to the extent detailed in the following pages. A secondary objective was the investigation of techniques to improve the performance of band-pass active filters using resistive-capacitive feedback networks. This objective was not achieved to the author's satisfaction, although several promising ideas were discovered"--Abstract, …

A Graphical Method Of Estimating Heat Capacities Of Hydrocarbons, Pu-Ying Liu

Masters Theses

"Heat capacity arises because the individual particles comprising a substance are able to move and thus take up kinetic energy and usually also potential energy as the temperature rises. In many substances electrons do not absorb energy until very high temperatures are reached. Thus most heat capacity effects are interpreted in terms of the motion of the atoms neglecting electronic transitions. The total internal energy of a material is, therefore, equal to the sum of the energies due to translational and rotational motion of the molecules and to the vibrational motion of the atoms making up the molecules...The objective of …

A Study Of The Structural Rearrangements Accompanying Room Temperature Recovery Of High Purity Aluminum, Carlos Manuel Lago

Masters Theses

"X-ray methods (Laue back reflection and transmission) and etch pit studies were used in order to follow structural changes in the deformed metallic lattice during room temperature recovery. The accumulative evidence indicates that the deformed lattice undergoes subboundary movements and regrouping of fragments within a few days after stressing. On the basis of a superficial investigation, it was found that fast neutron bombardment increases the rate of room temperature recovery. Through the use of a new etchant, a finer substructure was revealed within the Lacombe subgrain. Glide strain values were determined for the series investigated, and a new approach was …

Thermal Degradation Of Poly (Methyl Methacrylate) In Solution In Various Solvents, Ya-Chih Chen

Masters Theses

"A study has been made of the thermal degradation of poly (methyl methacrylate) of different molecular weights in toluene, ethyl acetate and chloroform. Four poly (methyl methacrylate) samples having molecular weights of 2,210,000, 733,000, 320,000, and 43,00, respectively were studied in this investigation. The results indicated that the polymer having a molecular weight of 2,210,000 undergoes degradation while the low molecular weight polymers having molecular weights of 733,000, 320,000, 43,000 undergo reverse polymerization"--Abstract, page [ii].

The Effect Of Epoxy Resins On The Plasticity Index Of An A-6 Soil, A. R. Van Steenbergen

Masters Theses

"This thesis reports the results of an investigation of the variation in plasticity of a clayey soil after treatment with small quantities of epoxy resin and curing agent or with curing agent alone. The series of samples tested consisted of an A-6 soil obtained from the vicinity of Rolla, Missouri, combined with: 1. 0-3% of triethylenetetramine hereafter referred to as TETA. 2. 0-3% of diethylenetriamine hereafter referred to as DETA. 3. 0-3% of Araldite 6010 resin cured with TETA. The TETA content was varied form 20% to 100% of the resin by weight. 4. 0-3% Araldite 6010 resin cured with …

Measurement Of Stray Load Loss Of D.C. Machines, Kanaiyalal Ramanlal Shah

Masters Theses

"For many years the standard practice, in calculation of conventional efficiency of d.c. machines, has been to include stray load losses as equal to 1% of the output. This assumption may be true for large, compensated d.c. machines but it is known to be small for smaller, uncompensated, general-purpose, industrial-type machines of open design. An A.I.E.E. Committee on Rotating Machines was formed to investigate whether the present practice of assigning 1% for the stray load loss is justified or not. They reached a conclusion, reported in 1949, after investigating 243 stray loss tests on different motors ranging from 1/2 hp …

A Study Of The Effect Of Surface Beveling On Silicon Rectifiers, Gary L. Voorhis

Masters Theses

"The problem in this thesis is to experimentally obtain voltage vs distance data for different angles of bevel, to determine the optimum bevel angle on the basis of minimum surface electric field, and also to determine the location of the maximum surface electric field with respect to the p-n junction. Experimental equipment is constructed and results are graphically illustrated. It is concluded that in general the maximum surface electric field decreased as the bevel angle decreased, that neglecting practical considerations the optimum bevel angle was 3⁰, and that the maximum surface electric field occurred near, but not at the p-n …

Maximum Present Value Calculations With Digital Computers, James Boyd Robison

Masters Theses

"This paper discusses maximum present value calculations for a mineral property using digital computers. A semi-quantitative mathematical model to optimize operating conditions is considered. The model is based on a modified cash flow analysis. Many variables affect the solution, and their effect upon present value is described. Selected data (mining rate, costs, reserves, metal sales price, and others) for a hypothetical open pit copper mine are used in a set of solutions for present value. The results are discussed in detail. It is concluded that: (1) Digital computer methods are rapid and useful, (2) Changes in the mining rate, average …

Cylinder-Head Surface Temperature And Maximum Pressure In A Diesel Engine, Jayant M. Patel

Masters Theses

"This report presents the result of an experimental investigation on the effect of 1) fuel consumption in a diesel engine on the mean cylinder-head surface temperature 2) engine speed and load on the maximum cylinder pressure.

A fast-response thermocouple was fixed in the cylinder head and temperatures were measured for various load and speed conditions. An attempt was made to record a transient surface temperature versus crank-angle diagram. Some doubt as to the reliability of this recording may arise because of the very small amount of time lag in the thermocouple action. This is immaterial to the subject of this …

The Development And Evaluation Of An Experimental Technique To Determine Stress Distribution In Uniformly Loaded Flat Plates, James William Walker

Masters Theses

"This thesis reports and evaluates an experimental technique that was developed to determine and monitor the stresses in a simply supported, uniformly loaded circular plate. Deflections are less than half the thickness of the plate. The application of the developed technique to plates whose integrity has been compromised with holes in various locations is discussed.

Resistance strain gages were used to determine experimentally the stresses in a simply supported, uniformly loaded circular plate with and without a concentric hole. The accuracy of the experimental results was established to be within approximately six percent of theoretical.

Proper application of the experimental …

Determination Of The Temperature Distribution Of The Ionized Portion Of The Jet From A Vortex Stabilized Plasma Generator Operating On Argon, G. Douglas Schellman

Masters Theses

"The interim thesis deals with the determination of the temperature distribution of a plasma jet operating on argon. It is the purpose of this thesis to present in detail the experimental process used and make a correlation of the experimental and theoretical results.

A copper enclosure was placed around the protruding flame, and the embedded thermocouple readings were taken and recorded. A stagnation temperature probe was inserted in the enclosure and moved both axially and transversely toward the flame taking readings at each pre-chosen interval. The exit temperature of the jet was obtained from a total energy balance.

From the …

The Design And Construction Of A Shock Tube Facility, William Adolph Crede

Masters Theses

"It is the object of this thesis to give an account of the considerations necessary to design, construct, and operate a shock tube facility.

The primary purpose of the facility was to provide a means to study high strength shock waves in physics, chemistry, and aerodynamic applications.

Preliminary designs were undertaken to determine the basic dimensions and related capabilities. Final design, construction and testing of the tube itself was performed by Nooter Corporation in St. Louis, Missouri. Preliminary designs agreed rather closely with final construction.

Experimental testing was confined to the successful operation of all the various components of the …

Turbulence In Journal Bearings, Kashyap R. Mehta

Masters Theses

"In this investigation, an experimental study was performed on a journal bearing under laminar and turbulent flow conditions. Using relationships for friction factor developed previously by other investigators a comparison was made with results of this present investigation. Since the flow changes from laminar to turbulent with a change in speed of rotation, curves for friction factor as a function of speed were plotted. Various attempts to make the recording and measuring systems more sensitive were also made and are discussed in this thesis"--Abstract, page ii.

The Dissolution Of Magnesium In Strong Acids And Neutral Solutions, Cheng-Ken Chi

Masters Theses

"The increasing demand for magnesium and magnesium- base alloys in the manufacture of aircraft has stimulated a great amount of research into the corrosion characteristics of these materials. The result of such research has been the development of suitable magnesium alloys and protective coatings to retard corrosion.

The basic mechanism of the anodic dissolution of metals such as magnesium, zinc, and cadmium in salt solutions is not completely known. Several schools of investigators have proposed different and opposing theories to explain the discrepancies which often arise between coulometer data and the weight loss of metal electrodes in certain salt solutions. …