Digital Commons Network^™

Improving Plasma Actuator Performance At Low Pressure, And An Analysis Of The Pointing Capabilities Of Cubesats Using Plasmonic Force Propulsion (Pfp) Thrusters, Paul Daniel Friz

Masters Theses

"This thesis details the work done on two unrelated projects, plasma actuators, an aerodynamic flow control device, and Plasmonic Force Propulsion (PFP) thrusters, a space propulsion system for small satellites.

The first half of the thesis is a paper published in the International Journal of Flow Control on plasma actuators. In this paper the thrust and power consumption of plasma actuators with varying geometries was studied at varying pressure. It was found that actuators with longer buried electrodes produce the most thrust over all and that they substantially improved thrust at low pressure. In particular actuators with 75 mm buried …

Application Of Electrically Invisible Antennas To The Modulated Scatterer Technique, Dylan Andrew Crocker

Masters Theses

"The Modulated Scatterer Technique (MST) has shown promise for applications in microwave imaging, electric field mapping, and materials characterization. Traditionally, MST scatterers consist of dipole antennas centrally loaded with a lumped element capable of modulation (commonly a PIN diode). By modulating the load element, the signal scattered from the MST scatterer is also modulated. However, due to the small size of such scatterers, it can be difficult to reliably detect the modulated signal. Increasing the modulation depth (a parameter related to how well the scatterer modulates the scattered signal) may improve the detectability of the scattered signal. In an effort …

Modelling Of Directed Energy Deposition Processes, Xueyang Chen

Masters Theses

"The laser additive manufacturing technique of laser deposition allows quick fabrication of fully-dense metallic components directly from Computer Aided Design (CAD) solid models. The applications of laser deposition include rapid prototyping, rapid tooling and part refurbishment. The development of an accurate predictive model for laser deposition is extremely complicated due to the multitude of process parameters and materials properties involved. In this work, a heat transfer and fluid flow model is developed.

In the heat transfer and fluid flow model, the governing equations for solid, liquid and gas phases in the calculation domain have been formulated using the continuum model. …

Comparison Of Costs Of Personal Protective Equipment For All Workers To Avoid Costs Of Fall Accidents, Sultan Noori Al-Karawi

Masters Theses

"The construction industry is one of the most important industries in the United States. It is the biggest contributor in the growth of the U.S. economy. Despite the great achievements and prominent role for this sector in the U.S. economy, the construction industry is suffering from neglect and dereliction by related government institutions and private companies. This neglect led to formation of a negative image about the construction industry that has caused a deep impact in productivity and economic growth. One of the reasons is a high percentage of accidents that occur within the construction industry which leads to injuries …

Quantitative Modeling Of Reliability And Survivability For Cyber-Physical Power Systems, Murtadha Nabeel Albasrawi

Masters Theses

"Critical infrastructure systems are increasingly reliant on cyber infrastructure that enables intelligent real-time control of physical components. This cyber infrastructure utilizes environmental and operational data to provide decision support intended to increase the efficacy and reliability of the system and facilitate mitigation of failure. Realistic imperfections, such as corrupt sensor data, software errors, or failed communication links can cause failure in a functional physical infrastructure, defying the purpose of intelligent control. As such, justifiable reliance on cyber-physical critical infrastructure is contingent on rigorous investigation of the effect of intelligent control, including modeling and simulation of failure propagation within the cyber-physical …

An Analytical Pressure Model To Guide Downhole Sensor Placement For Carbon Dioxide Sequestration Monitoring, Yilin Mao

Masters Theses

"Injecting CO₂ into saline aquifers is currently the most viable approach to mitigate global greenhouse gas effect. Various monitoring techniques are required to achieve 99% accuracy in determining the location of the injected CO₂ plume. Sensor locations are critical to the monitoring quality necessary to meet this requirement but have scarcely been discussed. The pressure profile needs to be modeled accurately at the initial stage of CO₂ injection to guide sensor locations. The objective of this thesis was to develop an analytical solution for CO₂ sequestration based on time and distance. This will guide the locations of downhole pressure sensors …

Hard-Switched Switched Capacitor Converter Design, Lukas Konstantin Müller

Masters Theses

"Switched capacitor (SC) converters are becoming quite popular for use in DC-DC power conversion. The concept of equivalent resistance in SC converters is frequently used to determine the conduction losses due to the load current. A variety of methodologies have been presented in the literature to predict the equivalent resistance in hard-switched SC converters. However, a majority of the methods described are difficult to apply to general SC converter topologies. Additionally, previous works have not considered all nonidealities in their analysis, such as switching losses or stray inductances. This work presents a generalized and easy to use model to determine …

The Effect Of Using Different Rock Failure Criteria In Wellbore Stability Analysis, Reza Rahimi

Masters Theses

"Determination of the appropriate drilling fluid density by rock failure analysis is an essential step to control wellbore instability. To determine wellbore failure stresses, the rock strength has to be known, an appropriate constitutive model has to be selected, and finally an accurate rock failure criterion must be chosen. Linear-poro elastic modeling of the mechanical wellbore failure is the most common approach to investigate wellbore instability. Numerous failure criteria have been used for the rock failure analysis but there is not any commonly accepted agreement of which failure criteria to use. Rock failure criteria differ in two main characteristics. First, …

M-Grid : A Distributed Framework For Multidimensional Indexing And Querying Of Location Based Big Data, Shashank Kumar

Masters Theses

"The widespread use of mobile devices and the real time availability of user-location information is facilitating the development of new personalized, location-based applications and services (LBSs). Such applications require multi-attribute query processing, handling of high access scalability, support for millions of users, real time querying capability and analysis of large volumes of data. Cloud computing aided a new generation of distributed databases commonly known as key-value stores. Key-value stores were designed to extract value from very large volumes of data while being highly available, fault-tolerant and scalable, hence providing much needed features to support LBSs. However complex queries on multidimensional …

Feasibility Study Of A Two-Fluid Small Modular Molten Salt Reactor With In Core Heat Removal Capability, Brandon James Lahmann

Masters Theses

"A feasibility study of a two-fluid small modular molten salt reactor (MSR) with in core heat removal was performed. The initial fuel block dimension for the configuration was based on the Fuji MSR. The fuel was a mixed fluoride salt of density 3.25 g/cc, composed of 71 LiF - 16 BeF₂ - 12 ThF₄- 1 ²³³UF₄ molar percentages. The coolant salt was Li₄(FLiBe) of density 1.94 g/cc. The work set out to establish whether or not such a reactor is thermodynamically feasible when optimized for various neutronics parameters. A Java based API was …

Performance Analysis Of Cutting Graphite-Epoxy Composite Using A 90,000 Psi Abrasive Waterjet, Aiswarya Choppali

Masters Theses

"Graphite-epoxy composites are being widely used in many aerospace and structural applications because of their properties: which include lighter weight, higher strength to weight ratio and a greater flexibility in design. However, the inherent anisotropy of these composites makes it difficult to machine them using conventional methods. To overcome the major issues that develop with conventional machining such as fiber pull out, delamination, heat generation and high tooling costs, an effort is herein made to study abrasive waterjet machining of composites. An abrasive waterjet is used to cut 1" thick graphite epoxy composites based on baseline data obtained from the …

An Interactive Product Development Model In Remanufacturing Environment: A Chaos-Based Artificial Bee Colony Approach, Vishwa V. Kumar

Masters Theses

"This research presents an interactive product development model in re-manufacturing environment. The product development model defined a quantitative value model considering product design and development tasks and their value attributes responsible to describe functions of the product. At the last stage of the product development process, re-manufacturing feasibility of used components is incorporated. The consummate feature of this consideration lies in considering variability in cost, weight, and size of the constituted components depending on its types and physical states.

Further, this research focuses on reverse logistics paradigm to drive environmental management and economic concerns of the manufacturing industry after the …

Data Classification And Forecasting Using The Mahalanobis-Taguchi Method, Adebolaji A. Jobi-Taiwo

Masters Theses

"Classification and forecasting are useful concepts in the field of condition monitoring. Condition monitoring refers to the analysis and monitoring of system characteristics to understand and identify deviations from normal operating conditions. This can be performed for prediction, diagnosis, or prognosis or a combination of any these purposes. Fault identification and diagnosis are usually achieved through data classification, while forecasting methods are usually used to accomplish the prediction objective. Data gathered from monitoring systems often consists of multiple multivariate time series and is fed into a model for data analysis using various techniques. One of the data analysis techniques used …

Development Of Structural Basins And Domes On The Sinn El-Kaddab Plateau, Egypt: Insights From In Situ Data And Application Of Moderate Resolution Orbital Imagery Of The Seiyal Fault, Thomas J. Jerris

Masters Theses

"The Seiyal Fault, one of many east-west trending faults located in the Western Desert of Egypt, and associated structural basins and domes are investigated using remote sensing imagery and field studies. Analysis of Shuttle Reconnaissance Topography Mission data, multi-spectral data from the Landsat Thematic Mapper (LM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), the Advanced Spaceborne Thermal Emission and Reflectometer (ASTER) data, and imagery from Google Earth. Band combinations 3-2-1 and 7-4-2 in ETM+ and 3N-2-1 and 7-3-1 in ASTER, and Google Earth provided the most useful images for geologic mapping. The Seiyal Fault is best characterized as a zone …

Updated Screening Criteria For Steam Flooding Based On Oil Field Projects Data, Mariwan Qadir Hama

Masters Theses

"Enhanced oil recovery (EOR) screening is considered the first step in evaluating potential EOR techniques for candidate reservoirs. Therefore, as new technologies are developed, it is important to update the screening criteria. Many of the screening criteria for steam flooding that have been described in the literature were based on data collected from EOR surveys biennially published in the Oil & Gas Journal. However, these datasets contain some problems, including outliers, missing data, inconsistent data and duplicate data, that could affect the accuracy of the results. Despite the importance of ensuring the quality of a dataset before running analyses, data …

Impact Of Fracture Spacing And Mechanical Parameter Anisotropy On Fracture Width In Horizontal Wells In Shales, Deepak Gokaraju

Masters Theses

"The success of economically viable production of oil and gas from ultra-low permeability shale reservoirs depends on the creation of an extensive fracture network through hydraulic fracture stimulation. Multiple hydraulic fractures are created simultaneously in each stage to increase the surface area of contact between the wellbore and reservoir. The spacing between fractures is an important component to consider when developing an optimum stimulation design. An important aspect of shale rock properties is that shales are inherently anisotropic with a horizontal plane of isotropy (transversely isotropic) due to their finely layered structure. This study aims to provide an insight into …

Effect Of Stress Concentrations On Fatigue Of Composite And Metallic Structures, Ross Henry Falen

Masters Theses

"The complex shapes of hydrokinetic turbine blades can include part features such as a fillet, step, or hole. Situations can arise where two part features, such as a hole and a fillet, may be in close proximity which can introduce stress concentrations within the blade structure, adversely affecting the structure's life. Because the interaction between the part features isn't well known, fatigue data is needed to determine the proper analysis.

In this thesis, two separate topics are discussed and investigated. The first topic deals with stress concentrations in hydrokinetic turbine blades. Several blade designs were tested and improved upon to …

A Cloud Brokerage Architecture For Efficient Cloud Service Selection, Venkata Nagarjuna Dondapati

Masters Theses

"The expanding cloud computing services offer great opportunities for consumers to find the best service and best pricing, which however raises new challenges on how to select the best service out of a huge pool. It is obvious time-consuming for consumers to collect the necessary information and analyze all service providers to make the decision. It is also a highly demanding task from a computational perspective, because the same computations may be conducted repeatedly by multiple consumers who have similar requirements. In this paper, we propose a novel brokerage-based architecture in the cloud, where the cloud brokers is responsible for …

Processing And Feature Analysis Of Atomic Force Microscopy Images, Xiao Pan

Masters Theses

"Atomic force microscopy (AFM) is a versatile and powerful tool for imaging and measuring small-scale objects such as nanoparticles, single molecules, semiconductor devices and living cells. The basic operation of an AFM can be to utilize a sharp cantilever tip that interacts with the sample surface and senses the local force between the tip and sample surface. Based on the physical interaction between the AFM and the small-scale object for image acquisition, there can be a number of artifacts, including curvature distortion (bowing effects), high-frequency or low-frequency noise, which may not be easily recognized by users accustomed to conventional microscopy. …

Fair And Optimal Resource Allocation In Wireless Sensor Networks, Vinodhini Ravikumar

Masters Theses

"There is a large amount of research in wireless networks focuses on optimization of either network routing and power control alone. In contrast, this work aims at jointly optimizing the transmission power and routing path selection in order to optimize allocation of resources in interference constrained wireless environment. Moreover, we consider a multipath routing where multiple alternative paths are employed to transmit data between the end nodes. One of modern communication techniques that it applies to a network coding, though not explicitly implemented in this work. The proposed approach is first analyzed theoretically using Lagrangian optimization for a three-node scenario. …

Improved Phase Shedding Technique In A Multiphase Converter System, Anagha Rayachoti

Masters Theses

"Multiphase converters are increasingly gaining prominence in the field of power electronics. The main advantage of a multiphase converter is its increased efficiency in comparison to a single phase converter. The one major drawback of a multiphase converter is its light load efficiency. Light load efficiency in multiphase converters is very poor when compared to single phase converters. Phase shedding is one of the approaches used to improve this light load efficiency but the transient output voltage response of the system shows large deviations during the process of phase change. This thesis proposes a new technique, called the ramp control …

An Investigation Of Contaminant Metal Distribution And Mineral Speciation In The Soil Near The Buick Recycling Division Smelter, Iron County, Missouri, Krista Nicole Rybacki

Masters Theses

"Trace metal contamination studies were conducted near the Buick Resource Recycling Division. This study used sequential extraction, total digestion, X-Ray Diffraction (XRD), and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS) to study trace metals in two soil cores. Sequential extraction analysis of the soil cores revealed that lead was associated with either iron or manganese oxides. Zinc and copper were bound to soil components, extracted mainly from organics, sulfides, and clays. Total digestion results compared favorably to the sum of the sequential extraction results for lead, thus validating the sequential extraction methodology. The highest concentration observed for lead was 4,743 parts …

An Effectiveness - Based Analysis Of Ground Coupled Heat Exchangers, Chou Shen

Masters Theses

"This thesis develops a theoretical framework, termed [Effectiveness] - BLU, to characterize the relation between temperatures, thermal contact and borehole length as it relates to the heat transfer processes in ground coupled heat exchangers used for ground source heat pump systems.

Borehole outflow temperature depends on the inflow temperature, the heat imposed on the borehole and the temperature history of the ground. In addition, variation of outflow temperature influences inflow temperature, even for the case of constant heat pump load. Because of this kind of feedback, the borehole inflow temperature may not be constant even with a fixed building load. …

Two Driven Pile Load Tests For Use In Missouri Lrfd Guidelines, Matthew Garry Stuckmeyer

Masters Theses

"A static pile load test program was initiated by the Missouri Department of Transportation (MoDOT) to evaluate the use of pile load tests in Missouri LRFD guidelines. The program's approach involves two phases to achieve the appropriate levels of reliability for driven piles in the state of Missouri. This thesis focuses on the data collection efforts of Phase 1. Two quick static pile load tests were performed to failure on test piles in the Southeast Lowlands geologic region of Missouri. The piles were dynamically monitored during installation and subsequent restrike tests performed. The results of the static and dynamic pile …

Efficient Data Access In Mobile Cloud Computing, Siva Naga Venkata Chaitanya Vemulapalli

Masters Theses

"This thesis focuses on the development of efficient data transfer mechanism among mobile devices using Mobile cloud computing paradigm. Mobile cloud computing is coupling of mobile computing and cloud computing. In the Mobile cloud computing paradigm, users connect to cloud service providers over the Internet and leverage the cloud resources to perform their processing, storage and communication tasks. In this thesis, the focus is on communication tasks among mobile devices performed using Mobile cloud computing paradigm.

Communication or data sharing among mobile devices is often limited by proximity of the devices. This limitation can be removed by employing Mobile cloud …

Studies Of Influencing Factors For Shale Gas Reservoir Performance, Jiaqi Wang

Masters Theses

"Shale gas resource plays a significant role in energy supply worldwide. For economic production of shale gas, technologies of horizontal well and hydraulic fracturing are used for shale gas reservoirs. Therefore, the productivity of the shale gas reservoirs will be influenced by both reservoir condition, and hydraulic fracture properties.

In this thesis, parameters that will influence shale gas production were classified into two categories: reservoir properties and hydraulic fracture properties. Published shale gas simulation studies were surveyed for determining the typical ranges of those properties. CMG-GEM was employed to finish the reservoir simulation work, and CMG-CMOST was used to complete …

Adaptive Wavelet Discretization Of Tensor Products In H-Tucker Format, Mazen Ali

Masters Theses

"In previous work, the solution to a system of coupled parabolic PDEs, modeling the price of a CDO, was approximated numerically. Due to the nature of the problem, the system involved a large number of equations such that the parameters cannot be stored explicitly. The authors combined the data sparse H-Tucker storage format with the Galerkin method to approximate the solution, using wavelets for the space discretization together with time stepping (Method of Lines). The aforementioned approximation is of the linear kind, i.e., using a nonadaptive method. In this work, three methods for solving such systems adaptively are presented, together …

Assessment Of Contributing Factors To The Reduction Of Diarrhea In Rural Communities Of Para, Brazil, Lee Voth-Gaeddert

Masters Theses

"In developing communities the occurrence of diarrhea has been reported at elevated levels as compared to those communities in more developed regions. Diarrheal diseases were linked to over one million deaths in 2012 throughout the world. While multiple pathways are present for the transmission of diarrheal diseases, water has been the focus for many aid organizations. Point-of-use (POU) water treatment methods are a common tool used by aid organizations in efforts to provide potable water. The CAWST biosand filter is a POU tool that has shown removal effectiveness of pathogenic microorganisms ranging from 90-99%. However, minimal literature was found that …

Cervical Cancer Histology Image Feature Extraction And Classification, Peng Guo

Masters Theses

"Cervical cancer, the second most common cancer affecting women worldwide and the most common in developing countries can be cured if detected early and treated. Expert pathologists routinely visually examine histology slides for cervix tissue abnormality assessment. In previous research, an automated, localized, fusion-based approach was investigated for classifying squamous epithelium into Normal, CIN1, CIN2, and CIN3 grades of cervical intraepithelial neoplasia (CIN) based on image analysis of 62 digitized histology images obtained through the National Library of Medicine. In this research, CIN grade assessments from two pathologists are analyzed and are used to facilitate atypical cell concentration feature development …

Determining And Mitigating The Effects Of Firing A Linear Shaped Charge Under Water, Brian Burch

Masters Theses

"When fired under water, a Linear Shaped Charge (LSC) does not penetrate a steel target as well as in air. This lack of performance has been a problem for shaped charge manufacturers and their clients. It was obvious that this degradation of performance is due to water having a higher density than air and water being incompressible compared to air. This study aimed to better determine how the water was affecting the LSC and to provide a method of mitigation.

LSCs of different sizes were submerged under water and fired through the water with and without a target. It was …