Digital Commons Network^™

Methods For Calculating The Minimum Amortization Tonnage And Maximum Present Value For An Ore Body, Garrett M. Sainsbury

Masters Theses

"The discussion is divided into three parts. Part I describes a procedure for determining the mining rate that gives the minimum amortization tonnage required of an ore body, and the amount of that tonnage. The basic idea is that amortization tonnage is equivalent to the estimated capital costs, including interest, divided by the estimated operating profit per ton. Both capital costs and operating profit per ton can be expressed as functions of mining rate by making use of empirical equations. Therefore, amortization tonnage can be expressed as a function of mining rate. The amortization tonnage is calculated for a series …

Heat Transfer In A Vortex Flow Metal To Air, Elisha Rachovitsky

Masters Theses

"In this study heat transfer in a vortex flow has been investigated experimentally and analyzed qualitatively.

Air was forced through a Ranque tube in order to get a swirling turbulent flow in its "hot" section. The test section, having a diameter of .355 inches and a length of 27.5 inches, was heated by an induction coil.

Three types of flow were under investigation: a linear turbulent flow, a vortex uniflow and a mixed vortex-linear turbulent flow.

The experiments covered a range of tube-wall temperature from 570 to 900 Deg. R and inlet pressure to the vortex generator ranged from 25 …

Determination Of Vapor-Liquid Equilibrium Data By Continuous Distillation, David William Bunch

Masters Theses

"The procuring of experimental vapor-liquid equilibrium data has been a problem of considerable importance to chemical engineers for a number of years. Modern distillation theory and practice have made accurate vapor-liquid equilibrium data practically a necessity.

Using conventional methods for determining vapor-liquid equilibrium data, an experimenter can obtain only a single vapor-liquid equilibrium composition per trial. Ramalho working with Tiller has developed a new method which makes possible the determination of all values of the vapor and liquid concentrations in a single experiment.

The work done by Ramalho indicated that the necessity for very precise temperature measurements presented a serious …

The Dielectric Strength Of Some Anti-Corrosive Paints, John Harvey Gustafson

Masters Theses

"Metals undergo chemical reaction with nonmetallic elements of their surroundings to produce compounds which are either oxides or salts. These corrosion products, as they are called, may accelerate, impede, or have no influence on the course of further corrosion. It is unfortunate that iron, the metal of greatest use to man, receives very little protection from its corrosion products. There are no easy or inexpensive means of prevention of this corrosion and at best the reactions can only be controlled. One method of control is the use of anti-corrosive paints. Their protection is produced by placing an inert, continuous, and …

The Redesign And Construction Of A Rotating Disc Contactor, Richard Henry Okenfuss

Masters Theses

"Liquid-liquid extraction has played a major role in the processing of nuclear fuels. The Department of Chemical Engineering of the Missouri School of Mines and Metallurgy realizing this, petitioned the Atomic Energy Commission for funds to design and construct an instructional facility representing the chemical processing of nuclear fuels. With this unit and its solvent recovery equipment, in which stress is placed on extraction and distillation, not only are the principles of nuclear fuels processing demonstrated, but the more basic concepts of mass and energy transfer are also illustrated. Extraction depends upon solubility differences to achieve a transfer of a …

Segregation Method As Possible Process To Beneficiate Oxidized Lead Ores, Jose Molfino Tomasio

Masters Theses

"In this investigation it has been demonstrated that the Segregation Process has merit for treating oxidized lead ores.

The process comprises heating the crushed ore with salt and coal at about 750° C. to produce metallic lead attached to the carbon particles, which then is recovered by conventional flotation methods.

The quantities of sodium chloride and coal required for the best segregation of lead obtained in this work was 1.0 percent of coal and 1.0 percent of salt by weight.

Good segregation was obtained by using salt and coal as fine as 65 or 48 mesh. Segregation varied with the …

A Study Of The Inlet Characteristics And Entrance Losses Of Pipe Culvert With A Flush Mounted, Sharp Edged Inlet, Luke Lea Callaway Jr.

Masters Theses

"Of all hydraulic structures, culverts are by far the most numerous. Lack of understanding of the functioning of culverts has resulted in many of them being implaced improperly and as a result, they function with less efficiency and at reduced capacity. Much has been written regarding the flow of water in open channels, culverts included, but little has been done regarding inlet conditions. It is necessary in the design of culverts, as with any other structure, that conditions which govern the operation of the structure be established. This paper is a study of the inlet conditions of a circular cross …

Water Resources Development -- An Analysis Of Economic Justification Practices Of The Corps Of Engineers, Kerwood W. Barrand

Masters Theses

"Presented herein is a brief analysis of the economic justification practices of the Corps of Engineers as commonly implemented in proposals concerning water resources projects. Where applicable, recommended methods are compared to similar methods advocated for, and accepted by, private engineering firms in similar situations.

The major problem exists in the lack of a profit motive in programs undertaken with the use of public funds. However, a profit can be said to have been realized in public works programs if the total benefits of the programs to all the people exceed the costs of these programs and, further, if the …

An Experimental Investigation Of Receiver System Sensitivity, James Henry Johnson

Masters Theses

"A method of determining the minimum detectable power density incident at the receiving antenna of a UHF receiver is proposed. The minimum detectable power density is the power density required to produce a signal-to-noise ratio of unity in the output of the receiver. The proposed method includes the receiving antenna impedance, the necessary connecting transmission lines, and the receiver impedance.

It is shown that an error in the antenna directivity will produce a significant error in the overall sensitivity of a receiving system. Since the directivity is the most difficult system variable to determine experimentally, it is probably the limiting …

The Separation Of Selected Radioactive Fission Products By Electrodialysis, Jerry David Vie

Masters Theses

"The recent advent of nuclear energy has opened an era of almost unlimited power and countless problems. A problem of extreme importance is the recovery of unburned nuclear fuel and the claiming of transmutation products, such as Pu²³⁹ and U²³³, from the irradiated fuel elements. The chemical processing must also separate the fission products from the fissionable material if the fuel is to be used again.

At present, the irradiated fuel elements are stored for 90 to 120 days to allow the intense short half-life activity to decay. After "cooling down", the nuclear fuels are separated from …

A Method Of Fuel Testing In A Cfr Engine, George R. Baumgartner

Masters Theses

"At the present time, only a very small fraction of motor fuels produced for domestic use in the United States contain any alcohol in their blends. Soma foreign markets, notably the Philippine Islands and South American Countries use high proportions of alcohol in their motor fuel blends. Special purpose fuels in the United States which have alcohol blended with other compounds, have been used for engines from which maximum horsepower output is imperative. An example of this type of motor fuel blend might be found in the competitive motor sports involving motorcycles, stock automotive equipment, and special racing equipment.

An …

Stress Distribution In Splined Shafts In Torsion By The Membrane Analogy, Charles L. Edwards

Masters Theses

"The purpose of this investigation is to determine torsional shearing stress distribution in various shapes of shafts. The project will include shafts with circular boundaries. No attempt will be made to show the relation between stress and applied torque"--Preface, page iii.

Construction Of A Pulsed Perforated-Plate Extraction Unit, Clarence James Vetter Jr.

Masters Theses

"Liquid-liquid extraction is an important operation in the production and reprocessing of nuclear fuels. In the purification of uranium by liquid-liquid extraction, uranyl nitrate is separated from impurities by extraction into an organic solvent, followed by re-extraction into an aqueous phase. Further processing of the aqueous uranyl nitrate solution is tailored to yield uranium metal or any desired uranium compound.

In order that students in nuclear and chemical engineering may have an understanding of the practical as well as theoretical aspects of liquid-liquid extraction, a model of a uranium purification plant was designed and built in the Unit Operations Laboratory …

Mississippian Bioherms Of Southwestern Missouri And Northwestern Arkansas, Arthur R. Troell Jr.

Masters Theses

"Lenticular bodies of massive limestone, flanked by thin crinoidal beds, crop out in southwestern Missouri and northwestern Arkansas. They are within the St. Joe limestone of the Lower Mississippian.

Strata underlying these bodies typically are down-warped, those on the flanks lapping against, finally passing completely over the limestone core. Dips away from the “reef” are commonly around 5 degrees, but reach as much as 30 degrees. Conglomeratic detritus, originating from the core, occurs in flanking beds at their contact with it.

Thin sections of these masses show no more than 15 per cent of the limestone to consist of fossil …

Business-Sponsored Films For Physical Science, Bertha Elizabeth Slye

Masters Theses

For many years business-sponsored films have been used widely in instruction in the science classroom. Because of the potential of the films in helping teachers bridge the gap between the fundamental teaching of scientific principles, and the applications found in the actual experiences of the student's consumer world, requests for them have often exceeded the output of those that are educationally sound. In the last decade in particular, the development of atomic and space technology, as well as the growing interest in science, have made it necessary to teach science beyond the confines of information in the ordinary science textbook. …

A Study Of The Simplicity Of Language In Selected Public Addresses Of Abraham Lincoln, Barbara Vanault Wallace

Masters Theses

No abstract provided.

Recent Trends Of The Redtop Crop In The Agricultural Economy Of Illinois, Dwight Leroy Huddlestun

Masters Theses

No abstract provided by author.

A Survey Of Businessmen In Effingham, Illinois To Determine How Effectively The Business Curriculum At Effingham High School Is Meeting Employment Needs, Joseph F. Green

Masters Theses

No abstract provided.

Introducing Children To Literature, Donna Deming

Masters Theses

No abstract provided.

High School Journalism, Robert Ernest Stuckey

Masters Theses

No abstract provided.

Effect Of Leaching On The Strength Properties Of A Hydrated Lime-Cement Stabilized Soil., Yurdakul Osman Ulugonul

Masters Theses

"The stabilization of soil has been carried on since early historic times. The Romans used lime and volcanic ash as additives for this purpose. After the discovery of cement and its property of bonding soil particles it became one of the essential additives in the soil stabilization field. Many other kinds of additives have been developed and are being used today for soil stabilization.

A question that arises through the increasing use of stabilizers in soil is whether the changes that are effected are of a temporary or permanent nature. Changes may occur from the degradation of the stabilized soil …

A Thermodynamic Study Of The Germanium Sulphides, Satya Prakash Jain

Masters Theses

"The experimental determination of some of the thermodynamic properties of germanium sulphide phases was conducted by a hydrogen reduction technique. The equilibrium H₂S/H₂ ratios were determined as a function of temperature for the two phase equilibria GeS₂-GeS and GeS-Ge. A Tutwiler analysis technique was used to analyze the equilibrated gas mixture for hydrogen sulphide content.

A detailed description is given for the process and the apparatus used in performing the experiments for equilibration of H₂S/H₂ gas mixture. The methods used for the preparation of germanium sulphide phases are also discussed.

The investigation …

Coal Dust Explosions And Their Prevention, Surya Narayan Roychowdhury

Masters Theses

"The purpose of this study is to review the various causes of coal dust explosions and to summarize the preventive measures through which it may be possible to minimize the hazards of coal dust explosions. The properties of coal dust which have an important influence on its explosibility are: fineness, purity, percentage of volatile matter, dryness, age and degree of oxidation, lifting velocities and dispersability, and its static electrification.

Explosibility of coal dust has been studied in laboratories, in explosion galleries and in an experimental coal mine. The data and results obtained from the tests showed that finely pulverized coal …

A Thermodynamic Study Of Germanium Sulfides, Sham Lal Malhotra

Masters Theses

"The vapour pressure of germanium monosulfide (liquid) was determined by a boiling point method. An expression for the vapour pressure as a function of temperature was obtained and the heat of vapourization calculated. Using the heat of sublimation data obtained by other investigators, the heat of fusion was calculated.

The thermodynamic properties, change of standard free energy (Δ F°) heat content (Δ H°) and entropy (Δ S°); of germanium disulfide were determined by using an indirect method. The equilibrium H₂S/H₂O ratios are determined for the reaction:

GeS₂ (s) + 2H₂O(g) = GeO_{2 …}

Deflections Of Two-Way Slabs, Gerald C. Godzwon

Masters Theses

"A reinforced concrete member is by no means a truly elastic member, hence all ordinary deflection calculations relating to it, whichever method, are approximate. By the use of model study actual reinforced concrete slab models, of different end conditions, were built and tested for deflections under uniform loadings. Theoretical and actual deflection of reinforced concrete slabs are compared. The results of these tests indicate that the theoretical deflection equations may be 60 to 80 percent in error when applied to reinforced concrete slabs"--Abstract, page 2.

Heat Transfer Coefficients In Artificially Roughened Pipes, Mehmet Hayati Turan

Masters Theses

"The purpose of this investigation is to determine experimentally the effects of three different types of artificial roughness on the convective heat transfer coefficient in a pipe and compare these values with that for a smooth pipe for turbulent flow"--Introduction, page 7.

The Status Of Gas-Lubricated Bearings, Bhaskar Dattatraya Shiwalkar

Masters Theses

"The idea of gas-lubricated bearings was suggested as far back as 1854 by Hirn, but it is only very recently that they have aroused a great amount of interest. The interest is centered on the advantages of gas-bearings for the following major applications:

1. High temperature lubrication where ordinary liquid or grease lubrication fails.
2. Bearings operating in radio-active atmospheres where conventional lubrication may break down.
3. Applications sensitive to contamination where fouling from lubricating oil becomes serious.
4. Low-friction devices--an especially important advantage because of the trend to high speed machinery.
5. Applications where positional accuracies down to micro-inches are required.

As a result …

The Conducting Sheet Analogy For Laplace And Poisson Equations, Ronald Edward Volker

Masters Theses

"This investigation determined the accuracy to be expected with conducting sheet analogy solutions for Laplace and Poisson equations using simple and relatively inexpensive instrumentation. Several problems were solved experimentally and compared to known theoretical solutions to check variables in the technique and the accuracy of the experimental solution. It was found that if proper procedures are followed, solutions can be obtained rather rapidly and with an error of less than 5% which compares favorably with accuracy obtained by other investigators with more complex, precise equipment"--Abstract, page 2.

Imperfections In A Silicon Crystal Studied By The X-Ray And Density Method, Pierre Borgeaud

Masters Theses

"The study of imperfections in several crystals of silicon was conducted by the x-ray and density method"--Abstract, page 2.

The Determination Of The Heat Transfer Film Coefficients Of Internally Heated And Twisted Strips, Karpurapu Venkata Apparao

Masters Theses

"As the demand for power supply is increasing, the power from nuclear fission is assuming an important role in the field of power production. The enormous quantity of heat generated during the fission process can be utilized for the generation of power. To get maximum advantage out of the fission process, the fission material must be fabricated into a unit of proper shape to permit the control of the process and safe removal of heat generated. This unit, composed of fuel elements is known as the reactor core and is one of the major concerns in nuclear power development.

The …