Digital Commons Network^™

The Faraday Rotation And Dispersive Doppler Effects In The Ionosphere At Oblique Incidence, Charles Roland Baugher Ii

Masters Theses

"Integral equations for the isotropic and anisotropic ray path of a radio wave propagating through the ionosphere are developed. These equations assume a spherically stratisfied ionosphere and are equivalent to a detailed ray-tracing process. A method is devised to utilize these equations in the evaluation of combined Faraday rotation and dispersive Doppler data from earth satellites for subionospheric electron content. The method, which corrects for horizontal ionospheric gradients, is applied to data from the Explorer 22 satellite and some preliminary results are discussed"--Abstract, page ii.

The Anodic Oxidation Of Maleic Acid, Larry D. Gilmartin

Masters Theses

"The purpose of this investigation was to determine the mechanism of the anodic oxidation of maleic acid on platinized-platinum electrodes at 80⁰C. Current density-potential studies were conducted varying the parameters of maleic acid concentration and pH. The faradaic efficiency of the oxidation of maleic acid to yield CO₂ was determined. The effect of temperature on current density was also studied to determine the activation energy for the reaction. The oxidation of maleic acid occurred only in acidic solutions. The faradaic efficiency was found to be approximately 97 ± 5 per cent. A linear Tafel region was found which had a …

A Simulation Study Of A Proposed Computer Installation, John Edward Hawthorne

Masters Theses

"The operation of a data processing center has been studied with the objective of investigating the effect of various facilities, job loads, and operating policies as measured by job turnaround time. The mechanism for study was digital computer simulation.

This thesis purports to review the technology of simulation and the associated computer techniques, defines the problem and the alternatives available, and analyzes the results derived from the experiments.

Conclusions drawn from this study support the current practice of a functioning data processing center"--Abstract, page ii.

A Study Of High Strength, Heat Treated Plain Carbon Steels, Ing Shing Chien

Masters Theses

"This work was undertaken as the initial step in a program of studying brittleness in carbon steel that has been heat treated to high strength levels.

The trend in modern technology is toward higher tensile strengths. In practice, only alloy steels are commonly heat treated to very high strength levels. AISI 4340 is one of the more commonly used steels when high strength is desired. It is also becoming almost standard practice to use some of the tool steels or highly alloyed maraging steels for high strength structural components.

For this study high strength in a heat treated steel is …

Fast Flux Measurement By A Single Multi-Threshold Foil, Kenneth Lawrence Cage

Masters Theses

"The purpose of this investigation is to determine the fast neutron spectrum by use of a single multi-threshold foil. The foils and the elements which constituted the foils were selected by the following criteria: availability of adequate cross-section data, energy dependence of the given reaction, gamma radiation emitted during decay and the half-life of the daughter. The two foils selected were an In-Fe- P pellet, and ALCOA 2509 (Al-Ni). The gamma spectrum of each constitute was stripped from the composite spectra using a least-squares fit. The activation results were utilized to calculate the fast flux using the weighted orthonormal method. …

Fluid Flow In Pipes Of Rectangular Cross Sections, Bruce Harold Bradford

Masters Theses

"Head loss due to fluid friction was measured in smooth conduits of rectangular cross section. The data covers the laminar and turbulent range. Results were compared with previous theoretical and empirical data.

The customary practice of calculating head loss in non-circular conduits by use of the friction factor obtained on an “equivalent” circular pipe was discussed. It was found that this practice is successful in square cross sections undergoing turbulent flow. In laminar flow, however, this method is not accurate"--Abstract, page ii.

Error Analysis Of Rational Approximations Of Functions With Emphasis On Minimax Techniques, Mary Frances Good

Masters Theses

"This study examines the various considerations which are made when a function is approximated by a rational function. None of the four approximations considered here gives both a rapidly calculated approximation and one in which the maximum magnitude of the error function over a given interval is a minimum.

The second algorithm of Remes produces a sequence of rational approximations which converge to the rational approximation that minimizes the maximum magnitude of the error function for a given number of parameters to be calculated if the initial approximation in the sequence is chosen properly. Several rational function approximations are investigated …

A Numerical Solution For Beam-Columns On Non-Linear Foundations, Wendelin H. Mueller Iii

Masters Theses

"A program for Matlock's recursive method, a numerical method which will analyze beams and columns with linearly varying spring supports, was modified to enable the solution of such members supported by non-linear springs. This modification was accomplished by an iterative technique. The final result of this paper is a computer program which can be used to solve beams or columns with non-linear spring supports, giving as output the deflection, slope, moment, shear, net load and curvature of the structure at uniformly spaced locations"--Abstract, page ii.

Permeability And Additive Sorption And Extraction In Lubricating Greases, Hsiu-Hsiung Lin

Masters Theses

"An important goal in the study of lubricating greases is the determination of the mechanism of additive action in lubricating greases and the effect of additive concentration on the improvement of particular properties. As a step in this direction, one aim of this investigation was an attempt to determine whether grease additives are sorbed on the thickener surface, or are dissolved in the oil phase, or if a combination of these effects prevails. Exploratory sorption and extraction experiments were run by Tu using greases thickened with lithium hydroxystearate and Baragel and using only one concentration of additive. More detailed studies …

The Development Of The Sonic Pulse Technique And Its Comparison With The Conventional Static Method For Determining The Elastic Moduli Of Rock, James Harold Deatherage

Masters Theses

"The determination of the elastic moduli of rock has long been a problem to the geophysicist, mining engineer and the civil engineer. There is a considerable amount of literature on determining Young's modulus by the sonic pulse technique. However, the use of this technique to determine the three elastic constants, Young's modulus, shear modulus, and Poisson's ratio from measurements of both the longitudinal and shear wave velocities presents some difficulties, especially in the method of accurately determining the shear wave velocities.

In this thesis, what is believed to be a new method of measuring shear wave velocities in the laboratory …

A Study Of Stress Distribution And Measurement Of Axial Strain Around A Pilot Hole During Overboring, Varakantham Sreedhar Reddy

Masters Theses

"Stress distribution around a pilot hole during overcoring was investigated. A study of axial strain on the borehole surface was undertaken. Two-dimensional epoxy resin models were prepared and stress frozen in a centrifuge. The stress-frozen models were examined under a direct-viewing polariscope. The magnitude of axial strain and the effect of strain relaxation on the pilot hole were measured on blocks of brittle materials. Factors contributing to discing of core during the overcoring operation were investigated and a mechanism of failure postulated. The loading conditions simulating in situ, core and bit pressures were applied individually to the brittle models and …

The Effect Of Epoxy Resin In Stone And Slag Concrete, James Chun-Min Chou

Masters Theses

"In concrete construction, the weight of the structure represents a large portion of the total load carried; thus, there is considerable advantage in reducing the weight of the concrete. To obtain this result, there are at least three approaches (1). The first method of producing lightweight concrete is by means of substituting a porous lightweight aggregate of low specific gravity for the ordinary aggregate. The second method relies on introducing large voids within the concrete or mortar mass; this is known as aerated, cellular or gas concrete. The third method is simply to omit the fine aggregate from the mix …

Space-Charge Effects As Determined By Initial-Field Conditions, Tsing-Yih Wang

Masters Theses

"A method for calculating the current density passing between two parallel plane electrodes for different values of positive charges as a function of " field at the emitter to field for no charge ratio " is presented.
The problem of the potential distribution between the electrodes has been solved for one particular case in which the positive charges are assumed to be proportional to the field at the emitter. The expressions for the electric field, the velocity of charges, and the charge density as a function of the potential are also presented and plotted as a function of the distance. …

Heat Flow In The Boss Deposit Of Missouri, Don Stainbrook

Masters Theses

"Values of heat flow through a Precambrian mineral deposit were determined in the Boss area of Missouri, where 350 meters of Paleozoic sedimentary rocks overlie a complex series of rhyolite flows which have been altered and contain a copper bearing magnetite deposit. Geothermal data were obtained from a closely spaced grid of 17 diamond drill holes penetrating to depths of 1000 meters below ground surface. Temperature measurements were made at 5 meter intervals in the Precambrian section of all holes. These and thermal conductivity measurements made on representative core samples from 300 to 400 meters below the top of the …

The Construction Of A Multi-Threshold Foil For Fast Flux Measurements, Michael Henry Holkenbrink

Masters Theses

"The construction of a multi-threshold foil for fast neutron flux measurements is investigated. The factors governing the selection of the materials are the energy response of the given reactor, the half-life of the daughter, the prominent gamma ray emitted during decays, the power level of the reactor, the availability of adequate cross section data, and the alloying properties of the composite foil. A ternary system was chosen as a compromise between the difficulty of fabrication and the amount of information gained from one foil. The particular system chosen was In- P- Fe. The threshold reactions of these elements are In¹¹⁵ …

Some Effects Of Selected Biodegradable Detergents On The Aeration Of Water And Activated Sludge, Donald Ernest Modesitt

Masters Theses

"The purpose of this study was to determine what effects the presence of selected biodegradable detergents have on the aeration of water and the activated sludge process for aerobic wastewater treatment. The detergents studied were LAS #1, Alfol, and Nalkylene. It was of particular interest to determine if these detergents decreased the oxygen absorptive capacities of water and wastewater. If detrimental effects were produced by the detergents it was then desired to determine if these effects were serious enough to create problems with aerobic wastewater treatment and aeration in receiving bodies of water.

A two liter volume of the liquids …

A Study Of The Removal Of Alkyl Benzene Sulfonate By Means Of A Column Packed With Sand Coated With Ferric Oxide, Chang I. Fung

Masters Theses

"Iron, precipitated in the form of hydroxides on sand particles (-48 + 65 mesh) and stabilized by drying at 100°C for 10 hours, was utilized to remove alkyl benzene sulfonate (ABS) from aqueous solutions. Solutions containing a maximum of 5 mg/l ABS were passed through a glass column packed with treated sand. The ABS formed a complex with the iron precipitants which adhered to the sand particles.

Preliminary work, in which solutions containing 10 mg/l ABS were treated with various concentrations of FeCl₂ at the equivalence point (pH about 9.5), verified the fact that ABS could be removed by …

The Construction Of A Fermi Neutron Chopper For Cross Section Measurements, Cleon Marion Mobley

Masters Theses

"A Fermi neutron chopper and control system has been constructed and put into operation at the end of the UMR Reactor thermal column.

The operation of the chopper has been demonstrated by reproducing the slow neutron cross section data for aluminum and by measuring the previously undetermined slow cross section of cobalt.

The chopper which is powered by a series DC motor consists of 34 cadmium plated stainless steel blades separated by 1/16 inch aluminum spacers. The design incorporates the better characteristics of the Brookhaven and Argonne slow choppers. Speed regulation is accomplished using a silicon controlled rectifier feed back …

Tectonic Analysis Of Mare Humorum On The Lunar Surface, Adnan Said Abul-Husn

Masters Theses

"Morphology and internal structures of surface features of the Mare Humorum area were interpreted from photographs and topographic maps. The postulated origin of certain features is based on analog comparisons with known terrestrial features. The laws of crate ring and a newly developed computer program were applied to two representative classes of craters to determine the possibility of a meteoritic impact origin. Some of the craters formed by meteoritic impact and others, including those with a radius larger than 10 Km, probably resulted from volcanic activity.

Mare Humorum formed from centripetal subsidence followed by extensive lava eruptions. Spacially related rilles …

The Effect Of Epoxy Resins On The Durability And Unconfined Compressive Strength Of An A-1b Soil, Guy H. Payne

Masters Theses

"This thesis reports the procedure and results obtained from the stabilization of a clean poorly graded sand with various amounts of epoxy resin. The same soil was also stabilized with varying amounts of Portland cement in order to have a basis for comparison of the results obtained. The sand used in this research came from the Meramec River in Central Missouri and is classed as an A-lb soil by the AASHO classification system. The following tests were performed on the stabilized samples: 1. Specimens were molded and compacted at 4%, 6%, 8%, 10% and 12% portland cement by weight of …

National Educational Objectives: A Comparative Analysis, Wilhemina J. Fernandez

Masters Theses

No abstract provided.

An Analysis Of Achievement Test Scores For Three Groups Of Lakeview High School Students, Joseph E. Schwalb

Masters Theses

No abstract provided by author.

The Effect Of Controlled Distractions Upon The Minnesota Clerical Test Results Of Eighth Graders In Charleston, Illinois, George Steigelman

Masters Theses

No abstract provided.

Slow Learners In High School English, Gwendolyn Jordan

Masters Theses

No abstract provided.

Knowledge Of Baseball Rules And Game Situations Possessed By Little League Umpires, James A. Kimball

Masters Theses

No abstract provided.

The Present Utilization Of Rural School Sites In East Central Illinois, Donald A. Tolen

Masters Theses

No abstract provided.

Factors Influencing The Organization And Administration Of Intramural Programs For Boys In Secondary High Schools In A Selected Geographical Area Of Illinois, Allan H. Gorgal

Masters Theses

No abstract provided.

A Study Of The Music Curriculum In Secondary Education, Donald Neibel

Masters Theses

No abstract provided.

Anti-German Sentiment In Madison And St. Clair Counties, 1916-1919, Frank Glen Adams

Masters Theses

No abstract provided.

The Boy's Changing Voice: A Comparison Of Theories, Richard D. Kruger

Masters Theses

No abstract provided.