Digital Commons Network^™

An Investigation Of The Influence Of Diaphragm Flexibility On Building Design Through A Comparison Of Forced Vibration Testing And Computational Analysis, Blake Alan Roskelley

Master's Theses

An assessment of the validity of idealizing a concrete diaphragm as rigid was performed through the modal analysis of three existing buildings. Modal analysis was performed both by physical experimentation and computational analysis. Experimental determination of the mode shapes shows that two of the three buildings’ diaphragms exhibited flexible behavior. The experimental results were compared to computational analysis results and were shown to be similar, confirming that that the two building diaphragms are not rigid. As a standard, diaphragms with aspect ratios less than three are permitted to be idealized as rigid per ASCE 7-05. To determine the effect of …

Design And Implementation Of User Level Socket Application Programming Interface With Socket Splitting And Mediation, Scott Walter Holzer

Master's Theses

Over the past few decades, the size and scope of the Internet has grown exponentially. In order to maintain support for legacy clients, new applications and services have been limited by dependence on traditional sockets and TCP, which provide no support for modifying endpoints after connection setup. This forces applications to implement their own logic to reroute communications to take advantage of composable services or handle failover. Some solutions have added socket operations that allow for endpoints to be redirected on the fly, but these have been limited in scope to handling failover and load balancing.

We present two new …

Modeling And Numerical Investigation Of Hot Gas Defrost On A Finned Tube Evaporator Using Computational Fluid Dynamics, Oai The Ha

Master's Theses

Defrosting in the refrigeration industry is used to remove the frost layer accumulated on the evaporators after a period of running time. It is one way to improve the energy efficiency of refrigeration systems. There are many studies about the defrosting process but none of them use computational fluid dynamics (CFD) simulation. The purpose of this thesis is (1) to develop a defrost model using the commercial CFD solver FLUENT to simulate numerically the melting of frost coupled with the heat and mass transfer taking place during defrosting, and (2) to investigate the thermal response of the evaporator and the …

The Impact Of Perceived Risk From Challenge Courses On Group Cohesion, Ryan R. Soares

Master's Theses

The purpose of this study was to assess the impact of perceived risk from high elements in a challenge course on group cohesion. Participants who have not participated in a challenge course will be selected from a First Year Experience cohort at a California State University (n=100). Six randomly selected teams of 12 to 17 people will participate in three and a half hour challenge course programs. Half of the groups completed only low elements, while the other half completed a combination of low and high elements. A pre, mid, and post test of the Group Cohesion Evaluation Questionnaire was …

Movement Of Selected Nearshore Temperate Reef Fishes Along California's Central Coast, Leslie Jaye Longabach

Master's Theses

Worldwide fisheries decline has spurred the utilization of new conservation and management approaches, including the implementation of marine reserves. The diversity of goals and expected outcomes should guide the marine reserve design process, coupled with a thorough understanding of the ecology of all species targeted for protection. Central California’s network of coastal marine protected areas (MPAs) was established in an environment of some uncertainty regarding the expected outcomes for temperate nearshore fish species, especially the Sebastes genus (rockfishes). Movement behavior of temperate reef-fishes plays an important role in the level of protection that a reserve will afford a species. Consistent …

Glorious Constructions: The Struggle To Preserve Salvation-Themed Visionary Art Environments, Molly Elaine Sheehan

Master's Theses

Salvation-themed art environments are a roadside rarity, built out of a strong visionary dedication to God, but the sites are disappearing simply because the work is misunderstood. The historiography on the subject is sparse, trending more toward coffee table books with big glossy pictures than real scholarly endeavors, but the consensus among all has been clear. The sites are a valuable part of the recent American cultural landscape, crossing several scholarly fields - art, architecture, and history - and uniting them into a cohesive preservation movement. On a series of trips to visit, see, and experience five of these sites, …

Nanoindentation Of Annealed And As-Sputtered Thin Films Of Nickel Titanium Shape Memory Alloys, Matthew Tyson Lewis

Master's Theses

The bottom-up processing techniques used for making Microelectromechanical systems (MEMS) devices can produce material properties different from bulk processing. The material properties must be evaluated with the process parameters used and for changes in the process parameters. The mechanical properties are needed to design MEMS devices. A material of interest for MEMS devices is nickel titanium (NiTi) shape memory alloy (SMA) because of the high work output (~107 J/m3). This thesis will focus on the fabrication of thin film NiTi by DC magnetron sputtering deposition and testing mechanical properties of the fabricated films by nanoindentation. Thin film NiTi SMA was …

Traffic Safety Investigations For Local Agencies, Jacob D. Hudson

Master's Theses

National and statewide (California) collision numbers are currently on the

decline; however, the U.S. is declining at a much slower rate than most other

developed countries, and in some aspects is actually regressing in terms of traffic

safety. Although state highway safety is improving, local roadway safety may

actually be regressing. Approximately three-quarters of all U.S. public roadways,

and approximately 80% of all injury accidents fall under the jurisdiction of cities.

However, cities may not be allocating the proper level of resources, or operating

under the proper administrative methodologies to adequately address these

safety issues.

This research finds that on …

Perceptions And Evaluation Of An Urban Environment For Pedestrian Friendliness: A Case Study, Elizabeth H. Lee

Master's Theses

Public health is an increasingly important issue addressed from both environmental and public health sectors for the future development of urban environments. From a planning perspective, one possible solution is to increase walkability throughout the cities. Many assessment methods are being developed and administered to evaluate the quality of existing urban environments to promote walkable cities/communities. The results from using these methods provide policymakers and stakeholders with valuable information regarding the existing physical conditions of the environment. Although several US cities started to develop and refocus plans toward pedestrian-oriented policies approaches, results from this particular study determined that the quality …

Cost-Benefit Analysis Of Greening An Older Modest-Sized Home, Delilah Zoe Leval

Master's Theses

This professional project estimates the upfront costs and utility savings expected from greening an approximately 1,100 square foot home built in the 1950s in the San Francisco Bay Area. Two sets of upgrades (alternative and original) were compared for costs and benefits. The alternative set (which included ceiling insulation and omitted upgrading to dual-pane windows) clearly out performed the original set. The alternative set would be expected to reduce resident utility bills by 28% annually, and to prevent approximately 2,700 lbs of carbon dioxide emissions annually. The water efficiency upgrades were the best performing group of upgrades, as they had …

Comparisons Of Fish Species Inside And Outside Of Marine Protected Areas Off The South Central Coast Of California, David E. Rasmussen

Master's Theses

COMPARISONS OF FISH SPECIES INSIDE AND OUTSIDE OF MARINE PROTECTED AREAS OFF THE SOUTH CENTRAL COAST OF CALIFORNIA

David E. Rasmussen

From 2004-2008 and 2008-2009 Cal Poly University researchers conducted two separate tag and recapture studies of nearshore fish populations along California’s central coast. Three locations were sampled that have experienced different degrees of fishing pressure. Big Creek MPA has been closed to all fishing from 1993 onwards and is the farthest from port of all locations. Cambria lies closest to port of the three locations and because of this has the highest fishing pressure. Piedras Blancas lies midway between …

Development Of A Subject Specific Finite Element Model Used To Predict The Effects Of A Single Leg Extension Exercise, Garrett Thomas Gleeson

Master's Theses

The study presented attempts to prove the concept that mechanical changes in the structure of a bone can be predicted for a specific exercise by a subject specific model created from CT data, MRI data, EMG data, and a physiologic FE model. Previous work generated a subject specific FE model of a femur via CT and MRI data as well as created a set of subject specific biomechanical muscle forces that are required to perform a single leg extension exercise. The FE model and muscle forces were implemented into a single leg extension FE code (ABAQUS) along with a specialized …

Process Characterization Of The Reactive-Ion Etching Of Borosilicate Glass For Microfluidic Channels, Ann Christine Huang

Master's Theses

The ability to work with small amounts of fluids is an emerging technology that can greatly benefit the biomedical industry, diagnostics, and society as a whole. Typically, these microfluidic devices are fabricated using polydimethylsiloxane (PDMS). Although it is optically clear, relatively inert, and easy to manipulate, PDMS does have its limitations. These include its tendency to swell when it comes in contact with certain chemicals and its hydrophobicity, which makes it difficult to analyze aqueous samples. Glass is an alternative material that addresses both issues. Etching is used to create these channels in glass. Wet etching procedures are typically isotropic …

Parameter Estimation Of Fundamental Technical Aircraft Information Applied To Aircraft Performance, Michael Vallone

Master's Theses

Inverse problems can be applied to aircraft in many areas. One of the disciplines within the aerospace industry with the most openly published data is in the area of aircraft performance. Many aircraft manufacturers publish performance claims, flight manuals and Standard Aircraft Characteristics (SAC) charts without any mention of the more fundamental technical information of the drag and engine data. With accurate tools, generalized aircraft models and a few curve-fitting techniques, it is possible to evaluate vehicle performance and estimate the drag, thrust and fuel consumption (TSFC) with some accuracy. This thesis is intended to research the use of aircraft …

The Effect Of Calcified Plaque On Stress Within A Fibrous Thin Cap Atheroma In An Atherosclerotic Coronary Artery Using Finite Element Analysis (Fea), Ellerie Nagy

Master's Theses

Atherosclerosis causes hundreds of thousands of deaths in the US alone every year. Fibrous cap rupture is one of the leading causes of these fatalities. Thin cap atheromas are commonly regarded as vulnerable plaque, however the effect of calcium upon a thin fibrous cap with lipid pool is poorly understood. Some studies have shown that calcium adds to stability of the lesion, while others have proven otherwise. An article by Li et al. 2007 suggests location is the key factor. By varying the percentage of calcium and lipid within a defined region, the stress on the cap was estimated using …

Performance-Based Analysis Of Steel Buildings: Special Concentric Braced Frame, Scott Michael Adams

Master's Theses

The performance-based analysis methods and evaluation criteria in ASCE 41-06 were used to evaluate a special concentric braced frame building based on the design standards in ASCE 7-05. A rectangular, six-story office building was evaluated using linear static, linear dynamic, nonlinear static, and nonlinear dynamic procedures. The results showed that the linear procedures underestimated damage compared to the nonlinear procedures, with the building performing to Life Safety for the linear procedures, and the nonlinear procedures indicating component damage beyond the intended Life Safety limit for the 2/3 maximum considered earthquake (MCE) hazard. This trend continued to the maximum considered earthquake …

Dietary Protein Intake, Body Composition And Self-Reported Physical Functioning In U.S. Adults, Kerri Beth Parker

Master's Theses

Sarcopenia is a growing health problem in this country as more Americans are living well into old age. It has been thought that a higher protein intake may be related to greater lean muscle mass as well as greater muscular strength and physical functioning. The purpose of this research was to examine protein intake and its relationship to lean body mass and physical functioning in a nationally representative sample of U.S. adults.

This research used cross-sectional data from the NHANES 2003-2004 to examine the relationship between protein intake, as an average from two 24h recalls, and dual X-ray absorptiometry (DXA) …

An Investigation Of Damage Arrestment Devices Application With Fastener/Hole Interaction, Richard Vincent S. Balatbat

Master's Theses

This thesis presents a parametric study on the effects of how damage arrestment devices application interacts with a fastener in a composite sandwich panel. The primary objective of the damage arrestment device was to prevent the failure of the composite face sheet, such as crack propagation, around the hole/fastener joint. The damage arrestment devices are made of composite strips that are inserted under the face sheet to increase the overall structural strength of the panel and to prevent the propagation of failure along the hole. This was supposed to be a quicker and stronger alternative to potted inserts for composite …

The Effects Of A Combined Supplementation Of Creatine And Sodium Bicarbonate On Repeated Sprint Performance, James Jeremy Barber, Todd Hagobian, Karen Mcgaughey, Ann Yelmokas Mcdermott, Jennifer Davis Olmstead

Master's Theses

Abstract The Effects of a Combined Supplementation of Creatine and Sodium Bicarbonate on Repeated Sprint Performance James Jeremy Barber There is well-established research that suggests both creatine and sodium bicarbonate are effective ergogenic aids. However, only one published study has examined the combined effects of creatine and sodium bicarbonate. The primary purpose of this study was to determine if a combined supplementation of creatine monohydrate and sodium bicarbonate would further enhance the well-documented effects of creatine supplementation alone on repeated sprint performance. Thirteen healthy and fit males (Mean age = 21.15 ± 0.65 years and mean VO2 max = 66.72 …

Development Of A Small And Inexpensive Terrain Avoidance System For An Unmanned Aerial Vehicle Via Potential Function Guidance Algorithm, Shane Alan Wallace

Master's Theses

Despite the first unmanned aerial vehicle (UAV) mission being flown on Aug 22 1849 to bomb Venice UAVs have only recently began to modernize into sophisticated tools beyond simple aerial vehicles. With an increasing number of potential applications, such as cargo delivery, communications, search and rescue, law enforcement, and homeland security, the need for appropriate UAV technology advancement also arose. Here, the development of a low-cost collision avoidance system is described. Hardware was tested and selected based on predetermined constraints and goals. Additionally, a variety of potential functions were explored and assessed at their effectiveness in preventing a collision of …

State Space Model Of A Light Weight Flexible Telescope, Chi-Yeh Hsu

Master's Theses

The accuracy of optical telescope in the past was dominated by the construction of the telescope body and the precision of optical surface. This thesis fits into a larger project with a goal of controlling a flexible telescope in order to help a cheaper telescope achieve higher accuracy. In order to understand the internal motion of telescope, the goal of this thesis is to build a state space model of a two-degree-of-freedom telescope using a known star location as feedback. The model presented in this thesis may be used for the telescope simulation and the control design in the future. …

A University Course To Facilitate The Transition Into, Through, And Beyond College Life, Matthew A. Crivello

Master's Theses

The purpose of this project was to review the literature associated with the social and psychological adjustments freshmen and transfer intercollegiate athletes face as they transition into college and create a mandatory course to assist them through their transition into California Polytechnic State University. This project led to the creation of an academic course that will be offered at California Polytechnic State University in the near future. This course could serve as an impetus for coaches, faculty, and administrators at other universities to develop similar courses, or reevaluate established course offerings, and to develop follow-up course training for intercollegiate athletes …

Multi-Frequency Processing For Lumen Enhancement With Wideband Intravascular Ultrasound, Rory A. Carrillo

Master's Theses

The application of high frequency ultrasound is the key to higher resolution intravascular ultrasound (IVUS) images. The need to further improve the IVUS spatial resolution may drive the transducer center frequency even higher than the current 40 MHz range. However, increasing the center frequency may be challenging as it leads to stronger scattering echoes from blood. The high level of blood scattering echoes may obscure the arterial lumen and make image interpretation difficult. Blood backscatter levels increase with transmission center frequency at a much greater rate compared to arterial tissue. These different frequency dependencies provide a potential method to distinguish …

Effects Of Changing Attentional Focus Reminder Rates On Learning To Throw Darts, Arya Alami

Master's Theses

The purpose of the study was to examine the effects of an external focus of attention on the learning of dart throwing at three different focus reminder frequencies (every two, every four and every ten trials). Twenty-four male and female subjects were randomly assigned to one of three groups. Subjects threw darts at a circular target 60 times over two days while getting a reminder of their intended external focus at the three different reminder frequencies. Five-day delayed retention and transfer tests were conducted to assess learning, each consisting of five trials. The target was comprised of five concentric circles, …

Dentoskeletal And Soft Tissue Treatment Effects Of Two Different Methods For Treating Class Ii Malocclusions., Madhur Upadhyay

Master's Theses

Objectives: Moderate to severe Class II malocclusions can not only cause esthetic and functional problems but can also lead to psychological problems of varying intensity depending on the amount of anterior-posterior discrepancy and its interaction with the related soft tissue structures. Although there are several methods of treating such malocclusions (extractions,distalization,functional appliances etc), the final goal is always to provide acceptable esthetics and stability. The purpose of this clinical-cephalometric study was to examine the dentoskeletal and soft tissue treatment effects of maxillary anterior teeth retraction with mini-implant (MI) anchorage in young adults having Class II Division I malocclusion undergoing extraction …

Corrosion Dynamics Of Cobalt-Chromium Alloy F-75 Powder, Tedman Tong

Master's Theses

The increasing usage of metal-on-metal joint replacements consisting of a cobalt-chromium-molybdenum alloy requires increasing concern regarding the inevitable generation of metallic wear debris. Patients with these joint replacements exhibit elevated concentrations of cobalt and chromium ions within their serum, blood and urine. The presence of these metal ions suggests the potential for bodily damage and indicates corrosive processes are acting upon wear debris.

To understand the behavior of these corrosive processes, powders of cobalt-chromium-molybdenum alloy F-75 were studied. Four powder sizes (44, 74, 105, and 420 µm diameter) were subjected to Hank’s Balanced Salt Solution (HBSS) for a 42 day …

The Effects Of Applied Strain And Heat Treatment On The Properties Of Niti Wire During Shape Setting, Frank Zapoticla

Master's Theses

NiTi components are commonly subjected to thermo-mechanical heat treatments during production and fabrication. This study investigates the effects of applied strain of 0-10% and heat treatments of 300-600ºC for times of 2-30 minutes during shape-setting of Ti–50.8 at% Ni wire with a nominal diameter of 0.495 mm and an initial transition temperature, Af, of 12ºC. Strain was applied prior to heat treatments by coiling NiTi wire, essentially producing coiled springs, around different diameter steel mandrels to obtain different strain levels. The samples of NiTi wire under applied strain were heat treated in a salt bath, followed by a rapid quench. …

Effects Of Wildland Urban Interface Fuel Treatments On Fire Behavior And Ecosystem Services In The Klamath Mountains Of California, Jonathan A. Large

Master's Theses

Greater numbers of people are moving into wildland-urban interface (WUI) areas, increasing the number of people at risk to large wildfires. To mitigate the hazard, emphasis is often placed on fuel treatments used to reduce fuel loads and subsequent fire behavior. This approach overlooks the additional benefits provided by vegetation, including carbon storage and sequestration along with air pollutant removal. This study aimed to calculate and compare differences in representative values by examining a study site in the Klamath Mountains of Northern California. Fire behavior simulations were done under various weather scenarios to illustrate both the impact of weather on …

Development Of Measurement Methods For Application To A Wind Tunnel Test Of An Advanced Transport Model, Robert S. Ehrmann

Master's Theses

California Polytechnic State University, San Luis Obispo is currently working towards developing a Computational Fluid Dynamics (CFD) database for future code validation efforts. Cal Poly will complete a wind tunnel test on the Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA) in the National Full-Scale Aerodynamics Complex (NFAC) 40 foot by 80 foot wind tunnel at NASA Ames Research Center in the summer of 2011. The development of two measurement techniques is discussed in this work, both with the objective of making measurements on AMELIA for CFD validation.

First, the work on the application of the Fringe-Imaging Skin Friction …

Class-F Power Amplifier With Maximized Pae, Kai Shing Tsang

Master's Theses

Due to the rapid development of telecommunication devices, operating speeds are getting faster and more power is being consumed by those devices. Therefore, there is a big concern on how to prolong the battery life in order to fit consumers’ needs. Power amplifiers (PA) at the front end of wireless equipment have drawn a big concern from engineers because of their large power consumption in the system. There is a lot research conducted on PA solutions for improving power-added efficiency (PAE) of amplifiers. PAE is a figure of merit representing how efficient the PA converts DC power to RF power. …