Digital Commons Network^™

Terror As A Social Movement Tactic: Applying The Multi-Institutional Politics Approach To The Case Of The Abu Sayyaf Group, Erika Mae Lorenzana Del Villar

Master's Theses

Solely equating terrorism with criminality discounts the social, political, cultural, and historical motivations that drive people to employ violence as a strategy for collective action. Using the multi-institutional politics approach to social movements (Armstrong and Bernstein 2008), this study explores the choice of the Abu Sayyaf Group (ASG) in the Philippines to employ terror and violence as the primary social movement tactic to pursue their Islamic separatist cause. Analysis of archival and open-source data, together with original interviews, reveal that the problem is multi-institutional – developmental, cultural, historical, social and political all at the same time. The choice of violence …

Coalescence Kinetics Of Lipid Based Bicelles, Andrew Hu

Master's Theses

Uniform nanodisc structures can be self assembled from mixtures of different phospholipids. This study focuses on the theoretical and experimental growth kinetics of phospholipid based nanodiscs. Motivation for this project comes from the nanodisc’s small size and their potential use as a carrier for drug delivery. It was observed that at high total lipid concentration the nanodiscs are stable at approximately 10 nm in radius and can remain stable for a long period of time. However, growth of these nanodiscs are observed at relatively low total lipid concentration. The observed growth mechanism is not well understood. In this thesis dynamic …

Analysis And Comparison Of Parallel Plate Flow Chambers To Determine Consistency Of Fluid Forces On Cells, Sampat S. Nidadavolu

Master's Theses

Biological cells are constantly exposed to fluid forces inside the body. These fluid forces aid in certain physical and chemical reactions that cells need to maintain physiological function. To observe these forces in vitro, parallel plate flow chambers (PPFC) are used, where cells are placed inside the chamber and a fluid medium runs through the device exposing the cells to fluid forces to initiate a response. This has aided in proving that fluid forces influence cell function and are factors in various disease and physiological processes, such as the development of atherosclerotic plaque in blood vessels or bone growth. Many …

Fabrication And Characterization Of A Palladium/Porous Silicon Layer, Nicholas Hong Lui

Master's Theses

When porous silicon is plated with a catalytic metal, the two materials can act together as a single entity whose electrical properties are sensitive to its environment – the sensing component of an electrochemical gas sensor. Etching pores into silicon is an electrochemical process; and which type of doped silicon used is one of its key parameters. For nearly all reported porous silicon gas sensors, the silicon has been of the p-doped variety – because p-doped porous etching is better understood and the layers that result from it are more predictable – despite n-doped silicon having potentially significant benefits in …

Effect Of Warm-Up Activity On Vertical Ground Reaction Forces In Basketball Players During Drop Jump Landings, Jacob Wesley Hinkel-Lipsker

Master's Theses

ABSTRACT

Effect of Warm-Up Activity on Vertical Ground Reaction Forces in Basketball Players During Drop Jump Landings

Jacob Hinkel-Lipsker

Purpose: The purpose of this study was to examine the effect of certain warm-up activities on vertical ground reaction forces (GRF_v) during a drop jump landing. Methods: Eight women and twelve men (mean age 22.6 ± 1.82 years) completed three warm-up activities on three separate days in a counterbalanced order: a passive stretching warm-up, a dynamic warm-up, and a no warm-up control. After completing each activity, participants were asked to perform eight drop jump landings on a force platform. …

Carbonate Production Selectivity In A Room Temperature Carbonate Fuel Cell Using Pt/C, Co(Ii)Pc, And Synthesized Tobermorite As Orr Catalysts, Gregory L. Crettol

Master's Theses

Room temperature anion exchange membrane fuel cells perform better when transporting carbonate vice hydroxide ions. Carbonate anions provide long-term membrane stability and improved oxygen reduction reaction (ORR) kinetics at the cathode and hydrogen oxidation kinetics at the anode, while also showing membrane conductivity comparable to hydroxide exchange membranes. Researchers have investigated potential non-platinum catalysts that have physical and electrochemical properties that favor the adsorption of CO₂ over H₂O, thereby, promoting the direct electrochemical formation of carbonate, which prevents membrane degradation caused by OH^- attack. This thesis introduces an in situ pulsed Galvanostatic technique that parallels analytical …

Implementation And Application Of The Response Eam For Hcp Metals, Matthew J. Stagon

Master's Theses

Atomistic simulations are a powerful tool for the study of materials, especially in the determination of underlying atomistic mechanisms. Molecular dynamics (MD) is an atomistic simulation method that is well suited for a large number of atoms in a system, up to one billion. MD holds sufficient physical rigor while keeping the number of calculations reasonable for modern computational power. In molecular dynamics, a mathematical potential is used to capture the physics of the interaction between two adjacent atoms or molecules. Existing potentials fail to adequately represent the interaction between some materials, such as Magnesium and Titanium, or are based …

The Effects Of Microfluidization And Homogenization On The Composition And Structure Of Liposomal Aggregates From Whey Buttermilk And Commercial Buttermilk, Tracey Mai T. Nguyen

Master's Theses

Milk derived ingredients from the production of cheese and butter can be used as vehicles for nutrients. Buttermilk is a nutritious product of milk that comes from the churning of cream into butter. One of the advantages of buttermilk is that it is enriched in milk fat globule components, such as phospholipids and forms emulsions with fat when treated with high shear. The objective of this work was to explore the effects of shear on regular buttermilk and whey buttermilk in terms of liposomal aggregate size and chemical composition. The effects of microfluidization at 2000 psi and homogenization at 2000 …

The Design And Fabrication Of An Electrostatically Actuated Diaphragm With A Silicon-On-Insulator Wafer, Elizabeth L. Brooks

Master's Theses

Electrostatically actuated silicon membranes were designed, modeled, fabricated, and characterized. The intended application was for use in a microspeaker. Fabrication issues necessitated the use of thick diaphragms with a large gap between the electrodes. The devices did not function as speakers but did show actuation with a high DC voltage. Device dimensions were chosen by examining membrane mechanics, testing the processing steps required for device fabrication, and modeling with COMSOL. Several adhesives were researched to fabricate the device sidewalls, including BCB, PMMA, and TRA-Bond F112. A method for patterning PMMA through photolithography was found using a scanning electron microscope. Masks …

Comparative Analysis Of Antiviral Responses In Mouse Embryonic Stem Cells And In Mesenchymal Stem Cells, Jundi Wang

Master's Theses

Embryonic stem cells (ESCs) are cells that have unlimited capacity for selfrenewal and differentiation. These properties make ESCs a great cell source for application in regenerative medicine. When used for cell therapy, ESC-derived cells could be placed in a wounded area that is likely to be exposed to various pathogens. However, it is not well-understood whether ESCs and ESC-derived cells have active antiviral responses against infectious agents from the environment. To answer this important question, I comparatively analyzed the antiviral responses of ESCs and mesenchymal stem cells (MSCs, C3H10Tl/2 cell line) to infectious agents. Using the expression of type I …

Risk Assessment Model For Pipe Rehabilitation And Replacement In A Water Distribution System, Jan C. Devera

Master's Theses

The efficient delivery of potable water for a community through its distribution system has historically been the backbone of nearly all metropolitan developments. Much of these systems are comprised of pipe networks made of various materials including concrete, iron, PVC, and even steel. As these communities expand and urbanize, water demand and population density simultaneously increase. This develops higher strains and stresses in the community‟s water distribution network causing pipes to corrode, crack, or rupture prematurely while in service. As a result, the deterioration of water distribution systems in growing cities is increasingly becoming a major concern for our nation. …

The Effects Of Variation In Collagen D-Spacing On Compact Bone Viscoelasticity: A Finite Element Analysis, Miguel A. Mendoza

Master's Theses

The D-spacing that is characteristic of collagen and its structural arrangement was previously thought to be a constant value. Much research is revealing that it is actually a distribution of values in biological tissues. Recent ovine experimentation has also shown that the D-spacing distribution is significantly altered following estrogen depletion. While ewes contain some major biological differences between their human counterparts, they are an economical and robust large animal model for postmenopausal osteoporosis. So, the exploration of the possible implications that D-spacing has on the mechanical properties of the whole bone utilizing animal models and computational methods is warranted. Six …

Thermal Analysis Of A Monopropellant Micropropulsion System For A Cubesat, Erin C. Stearns

Master's Theses

Propulsive capabilities on a CubeSat are the next step in advancement in the Aerospace Industry. This is no longer a quest that is being sought by just university programs, but a challenge that is being taken on by all of the industry due to the low-cost missions that can be accomplished. At this time, all of the proposed micro-thruster systems still require some form of development or testing before being flight-ready. Stellar Exploration, Inc. is developing a monopropellant micropropulsion system designed specifically for CubeSat application.

The addition of a thruster to a CubeSat would expand the possibilities of what CubeSat …

Net Productivity On Artificial Reefs In The Mississippi Sound Estimated From Settlement Plate Measurements, Viviana Mazzei

Master's Theses

The use of artificial reefs as a coastal management tool has become increasingly popular worldwide. The Mississippi Sound has 67 inshore artificial reefs sites, the main goal of which is to increase the production of economically and recreationally important fish, such as speckled trout, white trout, redfish, and black drum. The success of artificial reefs in meeting this goal depends in part on the quantity of primary and secondary production available on or near the reefs to support a reef-based food web. The objective of this study was to estimate phycoperiphyton net primary production and chlorophyll concentration on four artificial …

Post-Audit Verification Of The Model Swmm For Low Impact Development, David J. Rosa

Master's Theses

No abstract provided.

Constructing And Optimizing A Single Wafer Solar Cell Array In The Microfabrication Lab At California Polytechnic State University At San Luis Obispo, Rod Marstell

Master's Theses

CONSTRUCTING AND OPTIMIZING A SINGLE WAFER SOLAR CELL ARRAY IN THE MICROFABRICATION LAB AT CALIFORNIA POLYTECHNIC STATE UNIVERSITY AT SAN LUIS OBISPO

Solar cells are more and more becoming a significant source of energy in the world today. They are used to power entire buildings as well as small devices and everything in between, and are utilized all around the world. Smaller solar devices, such as hearing aid battery chargers, cost a lot of money relative to the monetary wealth in third-world countries. For this purpose, a less expensive, more efficient solar cell array should be developed.

This study contains …

Microphone-Based Pressure Diagnostics For Boundary Layer Transition, Spencer Everett Lillywhite

Master's Theses

An experimental investigation of the use low-cost microphones for unsteady total pressure measurement to detect transition from laminar to turbulent boundary layer flow has been conducted. Two small electret condenser microphones, the Knowles FG-23629 and the FG-23742, were used to measure the pressure fluctuations and considered for possible integration with an autonomous boundary layer measurement system. Procedures to determine the microphones’ maximum sound pressure levels and frequency response using an acoustic source provided by a speaker and a reference microphone. These studies showed that both microphones possess a very flat frequency response and that the max SPL of the FG-23629 …

Particle Image Velocimetry With Bluff Body And Jet In Cross-Flow Flame Holder Applications, Christopher Perron

Master's Theses

Particle Image Velocimetry with Bluff Body and Jet in Cross-Flow Flame Holder Applications Christopher P. Perron Master of Science, 2013 Abstract

In this study Particle Image Velocimetry (PIV) was used to acquire flow field and velocity information for a bluff body flame holder and a jet in cross-flow flame holder. The bluff body trials tested consisted of combustion of a premixed air and fuel flow with the purpose of improving boundary conditions. The jet in cross-flow flame holder was tested with a variety of jet to cross-flow momentum ratios. A tutorial is given on using MATLAB programming to use the …

Escherichia Coli Strain Diversity In Humans: Effects Of Sampling Effort And Methodology, Emily R. Neal

Master's Theses

Studies investigating Escherichia coli strain diversity and demographics in human hosts are frequently inconsistent regarding sampling effort and methodology while current strain typing methods are often expensive or laborious. To rectify these inconsistencies, sampling effort was investigated by comparing the diversity of 15-isolate collections to 100-isolate collections from 3 human subjects. Temporal variation in E. coli strain diversity was also studied by collecting 15 isolates once every 6 months. Additionally, strain identification and diversity collected by different sampling methods (fecal swabs vs. anal swabs collected at different times around defecation) were compared to identify any inherent biases in sampling method. …

A Generic Decision Making Framework For Autonomous Systems, Connor Lange

Master's Theses

With the rising popularity of small satellites, such as CubeSats, many smaller institutions previously incapable of developing and deploying a spacecraft have starting to do so. Institutions with a history of space flight, such as NASA JPL, have begun to put projects on CubeSats that would normally fly on much larger satellites. As a result, the institutions with space flight heritage have begun to port spacecraft software that was previously designed for much larger and more complex satellites to the CubeSat platform. Unfortunately for universities, who are the majority of all institutions devel- oping CubeSats, these ported systems are too …

Radiance Caching With Environment Maps, Michael Buerli

Master's Theses

The growing demand for realistic renderings in both film and games has led to a number of proposed solutions to the Global Illumination problem. In order to imitate natural lighting, it is necessary to gather indirect illumination of the surrounding environment for lighting computations. This is a computationally expensive problem, requiring the sampling or rasterization of the hemisphere surrounding each ray intersection, to which there is no standardized solution.

In this thesis we propose a new method of approximation using environment maps for caching radiance. The proposed method leverages a voxelized scene representation for storing direct illumination and a cache …

Applications Of Artificial Neural Networks To Synthetic Aperture Radar For Feature Extraction In Noisy Environments, David James Roberts

Master's Theses

It is often that images generated from Synthetic Aperture Radar (SAR) are noisy, distorted, or incomplete pictures of a target or target region. As the goal for most SAR research pertains to automatic target recognition (ATR), extensive filtering and image processing is required in order to extract the features necessary to carry out ATR. This thesis investigates the use of Artificial Neural Networks (ANNs) in order to improve upon the feature extraction process by laying the foundation for ANN SAR ATR algorithms and programs. The first technique investigated is that of an ANN edge detector designed to be invariant to …

The Accessible User Interaction Framework For Android Applications, Xiaoxi Luo

Master's Theses

As mobile technologies advance, accessibility features of smartphones are continu- ously improving and becoming more prevalent. It is essential that the user interaction design of mobile applications provides equal access and equal service to all our com- munity, especially for people with disabilities. However, there are no general mobile accessibility design guidelines publicly available. This paper reviews the web acces- sibility development guidelines as a reference, and the current accessibility features provided by modern mobile operating systems.

It is proposed in this paper to use interactive spoken dialogues as the user interac- tion framework for accessible mobile applications. The idea …

Computer Sketch Recognition, Richard Steigerwald

Master's Theses

Tens of thousands of years ago, humans drew sketches that we can see and identify even today. Sketches are the oldest recorded form of human communication and are still widely used. The universality of sketches supersedes that of culture and language. Despite the universal accessibility of sketches by humans, computers are unable to interpret or even correctly identify the contents of sketches drawn by humans with a practical level of accuracy.

In my thesis, I demonstrate that the accuracy of existing sketch recognition techniques can be improved by optimizing the classification criteria. Current techniques classify a 20,000 sketch crowd-sourced dataset …

Evaluating Usability Evaluations, Allen Leo Dunlea

Master's Theses

We live in an age when consumers can now shop and browse the web using hand-held devices. This means that competitive companies need to have a website to represent their brand and to conduct business. E-commerce sites need to pay special attention to the usability of their sites, since it has such an impact on how potential costumers view their brand.

Jakob Nielsen defines usability as a "quality attribute that assesses how easy user interfaces are to use"; he separates usability into five quality components: learnability, efficiency, memorability, errors and satisfaction. The current standard for testing usability involves having …

Cplop: The Cal Poly Library Of Pyroprints, Jan Lorenz Villaceran Soliman

Master's Theses

To date, microbial source tracking (MST), i.e. determining the source of microbial contamination based on the specific strains observed in the environment, often uses methods that are time-consuming, expensive and not always reliable. The biology department at Cal Poly, San Luis Obispo has developed a new method for MST called pyroprinting. Pyroprints can be used as DNA fingerprints for identifying sources of fecal contamination and studying bacterial populations in host animals. The MST method consists of two parts: the pyroprinting process and a database of pyroprints. The Cal Poly Library of Pyroprints (CPLOP) was developed to provide a database application …

Computational Modeling To Evaluate Helical Electrode Designs For Use In Vagus Nerve Stimulation, Anthony W. Cowley

Master's Theses

An estimated 0.5% of world’s population has been diagnosed with epilepsy. Of these patients 20-30% will be unable to achieve seizure control with anti-epileptic drugs. Vagus nerve stimulation (VNS) may be an appropriate treatment option for some patients with pharmaceutically refractory, partial-onset seizures.

VNS therapy uses a helical electrode to interface between the implantable pulse generator and the vagus nerve. While there have been several studies related to the mechanical and electrical safety of such electrodes, little work has been done toward understanding the effectiveness of the helical electrode in nerve stimulation. A better understanding of the voltage field and …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

Real Time Visibility Culling With Hardware Occlusion Queries And Uniform Grids, Ilya Iseletsk Seletsky

Master's Theses

Culling out non-visible portions of 3D scenes is important for rendering large complex worlds at an interactive frame rate. Past 3D engines used static prebaked visibility data which was generated using complex algorithms. Hardware Occlusion Queries are a modern feature that allows engines to determine if objects are invisible on the fly. This allows for fully dynamic destructible and editable environments as opposed to static prebaked environments of the past. This paper presents an algorithm that uses Hardware Occlusion Queries to cull fully dynamic scenes in real-time. This algorithm is relatively simple in comparison to other real-time occlusion culling techniques, …

Manufacturing Execution System (Mes) An Examination Of Implementation Strategy, Riley F. Elliott

Master's Theses

The priorities of executing the manufacturing orders generated by an MRP system are often in operational conflicts with the dynamics of the manufacturing floor. It is not uncommon for a given manufacturing order to reach the shop floor several weeks or longer after being "opened" by an MRP system where it may face a chaotic case of large queues, machine down-time, parts shortage, scrap problems and other resource management constraints. Many companies have resorted to the Manufacturing Execution System (MES) software solution to resolve these problems. This method first gained popularity in mid-90’s within the semiconductor industry. An MES approach …