Digital Commons Network^™

A Study On The Hydrodynamics Of A Bench-Scale Top-Fed Bubbling Fluidized Bed Gasifier Using Biomass And Coal As Feedstocks, Ali Can Sivri

Graduate Theses, Dissertations, and Problem Reports (ETD)

The production of synthetic gas (syngas) from renewable or carbon-neutral sources can significantly reduce greenhouse and other emissions associated with conventional fuels. One of the most promising technologies to efficiently convert carbonaceous feedstocks such as biomass, coal, or municipal waste into syngas for transportation, power, heat, electricity generation, and or production of added-value chemicals is the bubbling fluidized-bed gasifier (BFBG). However, the gasification process inside a BFBG is a very complex high-temperature multiphase flow phenomena still not well understood, particularly when binary mixtures are investigated. As a result, despite the numerous correlations in the literature developed to predict the hydrodynamics …

Implementation Of Radial Basis Function Artificial Neural Network Into An Adaptive Equivalent Consumption Minimization Strategy For Optimized Control Of A Hybrid Electric Vehicle, Thomas P. Harris

Graduate Theses, Dissertations, and Problem Reports (ETD)

Continued increases in the emission of greenhouse gases by passenger vehicles has accelerated the production of hybrid electric vehicles. With this increase in production, there has been a parallel demand for continuously improving strategies of hybrid electric vehicle control. The goal of an ideal control strategy is to maximize fuel economy while minimizing emissions. The design and implementation of an optimized control strategy is a complex challenge. Methods exist by which the globally optimal control strategy may be found. However, these methods are not applicable in real-world driving applications since these methods require a priori knowledge of the upcoming drive …

Making Space For Writing: Makerspace Activities And Academic Language In A Middle School Science Classroom, Ashley Stewart

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over recent decades, the maker movement has expanded from the private sector, libraries, and higher education institutions to K-12 schools. While many studies provide implications of STEM and maker activities and their effects on learning in informal settings, few have framed such investigations within the context of a makerspace in K-12 schools. Furthermore, few have investigated maker activities and writing, particularly in developing academic language features. Prior research suggests that secondary students struggle to apply academic language features. Meanwhile, they are motivated to engage in STEM and maker activities. This mixed methods case study attempted to make a connection between …

Evaluation Of Fitts’ Throughput As A Possible Performance Measure For Manual Assembly Tasks, Pradyumna Bettagere Jagadish

Graduate Theses, Dissertations, and Problem Reports (ETD)

Assembly lines are the backbone of the manufacturing sector. Workers at the assembly lines are expected to perform fast pace hand-arm exertions with precision and accuracy. To protect the workers from injuries, OSHA mandates the use of personal protective equipment (PPE) including gloves. Certain assembly operations require the use of special gloves. Some of these gloves can inhibit hand performance, further increasing the task difficulty. The Index of Difficulty (ID) is a metric measured in ‘bits’ quantifies task difficulty through the quotient of target width and target motion, i.e., distance travelled. The time required to complete the target motion is …

Development Of Software-Only Simulation Test Beds (Sost) For Spacecraft And Smallsats, Scott Alan Zemerick

Graduate Theses, Dissertations, and Problem Reports (ETD)

Software-only-Simulation Test Beds (SoST) are beginning to become more popular among aircraft, spacecraft, and smallsat embedded system developers due to the high cost of duplicating hardware test beds.

SoSTs provide a software-only, or virtual test bed, that creates a “digital twin” that contains software models of the ETUs and often includes modeled components such as flight computers, busses (e.g., MIL-STD-1553, SPI, I2C), compact PCI (cPCI) backplane cards, sensors, and actuators. The ultimate goal of a SoST is for it to run the native system software compiled-binary on its native CPU architecture (e.g., PowerPC, LEON3/4, ARM) on a standard X86 personal …

Application Of Flowing Material Balance In Unconventional Reservoirs, Salem Alharbi

Graduate Theses, Dissertations, and Problem Reports (ETD)

The application of the horizontal drilling and hydraulic fracturing to unconventional reservoirs, such as Marcellus Shale, has resulted in a significant increase in gas production in the United States. The estimation of the original hydrocarbons in place is an essential element for evaluating the economic success of any reservoir. There are a number of techniques available for estimating the original hydrocarbon in place such as decline curve analysis, volumetric method, and the material balance equation. Flowing Material Balance (FMB) is a more advanced techniques which has become popular in recent years because it does not require static (shut-in) pressure data …

Design And Optimization Of Dynamic System For A One-Kw Free Piston Linear Engine Alternator-Gensets Program, Nima Zamani Meymian

Graduate Theses, Dissertations, and Problem Reports (ETD)

In power/energy systems, free-piston linear machines are referred to as a mechanism where the constrained crank motion is eliminated and replaced with free reciprocating piston motion. Depending on the application, the piston motion can be converted into other types of energy and includes compressed air/fluid, electricity, and high temperature/pressure gas. A research group at West Virginia University developed a free-piston linear engine alternator (LEA) in 1998 and have achieved significant accomplishment in the performance enhancement of the LEAs to date. The present LEA design incorporates flexure springs as energy restoration components and as bearing supports. The advantages of using flexure …

Exploration Of Unknown Environments Using A Tethered Mobile Robot, Danylo Shapovalov

Graduate Theses, Dissertations, and Problem Reports (ETD)

Exploration with mobile robots is a well known field of research, but current solutions cannot be directly applied for tethered robots. In some applications, tethers may be very important to provide power or allow communication with the robot. This thesis presents an exploration algorithm that guarantees complete exploration of arbitrary environments within the length constraint of the tether, while keeping the tether tangle-free at all times. While a generalized algorithm that can be used with several exploration strategies is also proposed, the presented implementation uses a modified frontier-based exploration approach, where the robot chooses its next goal in the frontier …

The Impact Of Stress Shadowing With Variations In Cluster Spacing On The Production For Wells Completed In The Marcellus Shale, Joshua R. Dietz

Graduate Theses, Dissertations, and Problem Reports (ETD)

The design of the well stimulation treatment has significantly changed over the last decade because of the advancement of hydraulic fracturing. The cluster and stage spacing design component of hydraulic fracturing has been a key factor in enhancing the production from the horizontal wells. Recently, the treatment designs are moving towards lower cluster spacing. The reduction of the spacing alters the in-situ stresses in the formation and begin to impact the propagation of next set of future fractures and the properties of previous fractures. These stress alterations from hydraulic fracturing is referred to as stress shadowing.

The objective of study …

Design And Development Of A Multi-Nodal Methane Detection System For Longwall Coal Mining, Amber P. Barr

Graduate Theses, Dissertations, and Problem Reports (ETD)

Methane (CH4) explosions pose significant dangers in longwall mining that may lead to injuries and fatalities. Safety is improved through diligent monitoring of CH4 concentration. Currently, regulations require a CH4 monitor be placed on the shearer, downwind of the cutting head. Portable monitor measurements must be taken at various times and locations. If any CH4 monitor measures a concentration greater than 1%, a warning signal must be given. Based on previous research and the location of the CH4 monitor mounted on the shearer (closest monitor to the face), if 1% methane is measured, the concentration at the face may be …

Fundamental Studies On The Recovery Of Rare Earth Elements From Acid Mine Drainage, Xue Huang

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Rare Earth Elements (REEs) are a group of 17 chemically similar elements that are essential raw materials for modern society. Given their increasing importance in civil and defense applications, many national governments, including the US, have denoted the REEs as critical materials and emphasized the need to identify and develop both conventional and unconventional resources to meet the growing demand. To address this challenge, the US Department of Energy has recently spearheaded efforts to evaluate the technical and economic feasibility of recovering REEs from coal and coal byproducts, which have been shown to contain REEs at an elevated concentration …

Terrain Aware Traverse Planning For Mars Rovers, Gabrielle Hedrick

Graduate Theses, Dissertations, and Problem Reports (ETD)

NASA is proposing a Mars Sample Return mission, to be completed within one Martian year, that will require enhanced autonomy to perform its duties faster, safer, and more efficiently. With its main purpose being to retrieve samples possibly tens of kilometers away, it will need to drive beyond line-of-sight to get to its target more quickly than any rovers before. This research proposes a new methodology to support a sample return mission and is divided into three compo-nents: map preparation (map of traversability, i.e., ability of a terrain to sustain the traversal of a vehicle), path planning (pre-planning and replanning), …

A Study Of Impact Protection Of Metacarpal Gloves, Faisal Mohammed Alessa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Work-related wrist, hand, and finger injuries are highly prevalent in manufacturing and extractive industries. An analysis of mining-related hand injury data from over the past two decades (Alessa et al., 2020) showed that hand injuries caused by insufficient protection against impact loads (e.g. struck by accidents) were categorized with high severity. Existing literature lacks clear classification and quantification methods for the protection provided by impact-resistant gloves (i.e. metacarpal gloves). A new method to establish a quantitative measure of performance for commonly used metacarpal gloves was developed and evaluated.

In the first specific aim, an experimental study using cadaveric hand specimens …

Evaluation Of Object Attributes To Study Speed-Accuracy Trade-Off Of Gloves Using Iso 9241-411 Standard, Isha Gaut

Graduate Theses, Dissertations, and Problem Reports (ETD)

Selection of appropriate gloves plays an important role in the overall comfort and productivity of workers. Currently, there are no standards and/or guidelines available to systematically evaluate the glove performance based on speed-accuracy trade-off. The ISO 9241-411 standard which is based on Fitts’ Law has been extensively used in the literature to measure speed-accuracy trade-off in terms of throughput in the virtual environments. This study was aimed at developing guidelines for implementing ISO 9241-411 standard in the physical environment so that it can be used to estimate (and compare) throughputs of safety gloves. Specifically, the various physical attributes of objects …

Process Modeling And Techno-Economic Analysis Of Thermo-Catalytic Dimethyl Ether Synthesis And Microwave-Based Aromatics Production Technologies From Shale Gas, Chirag Mevawala

Graduate Theses, Dissertations, and Problem Reports (ETD)

Production of dimethyl ether (DME) and direct non-oxidative methane dehydroaromatization (DHA) to aromatics via conventional and microwave (MW)-assisted processes are investigated in this research. Plant-wide models of the shale gas to DME process with integrated CO₂ capture via direct and indirect synthesis routes have been developed. Optimal parameter estimation, and model validation are undertaken for various sections of the process including the pre-reforming reactor, auto-thermal reforming reactor, DME synthesis reactors, CO₂ capture units and separation sections. A novel DME separation process has been developed for efficient separation of DME, syngas, and CO₂. Plant-wide techno-economic optimization is …

Synthesis And Characterization Of Pyridine Dipyrrolide Iron Complexes Relevant To Nitrene And Carbene Group Transfer, Brett M. Hakey

Graduate Theses, Dissertations, and Problem Reports (ETD)

The synthesis and electronic structures of the square-planar high-spin Fe^II complexes (^MesPDP^Ph)Fe(OEt₂) and (^MesPDP^Ph)Fe(thf) were investigated. Analysis of these compounds using a combination of ¹H NMR and ⁵⁷Fe Mössbauer spectroscopies, in conjunction with computational analysis, has resulted in a rationalization for their unusual electronic structures, which arise from the unique coordination environment enforced by the pyridine dipyrrolide chelate ligand.

The reactivity of (^MesPDP^Ph)Fe(thf) with organic azides has been probed and resulted in the isolation of an array of products that are consistent with …

Green Completion As A Mitigation For Btex Exposure In Gas Flaring: Nigeria Case Study (Exposure Assessment And Cost Model), Akintunde S. Akinyemi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Gas flaring is an essential part of the oil and gas industry safety and waste management procedures; however, it presents a potential exposure to BTEX compounds, a group of Non-Methane Volatile Organic Compounds (NMVOC), within up to a 10-mile radius of the flare point. The physical and the psychological cost of the journey to work, make employees live close to the workplace. This study examined the perceived exposure of oil and gas industry workers to possible carcinogenic emissions outside the workplace. It looked at the outcomes of the exposure to BTEX through gas flaring drawing on archival data and using …

Comparison Of Condensation Nuclei Counter And Controlled Negative Pressure Methods Under Different Environmental Conditions Tested With A Mannequin And Human Subjects, Olanrewaju John Fadairo

Graduate Theses, Dissertations, and Problem Reports (ETD)

Continuing concern about exposure to respiratory hazards at various workplaces and prevalent pandemics such as H1N1/09 influenza and COVID-19, have necessitated a need for more research regarding respirators. Quantitative fit testing (QNFT) is a critical component of an OSHA compliant respiratory protection program. QNFTs are often performed in environments where temperature and relative humidity (RH) vary. However, no study has investigated the possible effects of these parameters on penetration and QNFT results.

This comparative study utilized condensation nuclei counter (CNC) and controlled negative pressure (CNP) methods to quantitatively determine simulated mannequin fit factors (SMFFs) and human fit factor (HFFs) using …

Effect Of Binder Modification And Aggregate Size On Modulus And Fatigue Of Asphalt Concrete, Elizabeth Bashiti

Graduate Theses, Dissertations, and Problem Reports (ETD)

Asphalt concrete is one of the main ingredients used in the paving of roadways across the globe. These roadways have been deteriorating from overuse, under design, and a lack of understanding of the engineering properties. In the asphalt community, it is agreed upon that polymer modifiers and aggregate size have comparable impacts on the performance of a pavement, such as, low creep at high temperatures, high ductility at low temperatures, high toughness, resistance to moisture and temperature, high cohesive and adhesive strength. With all of these advantages, it has been often assumed that polymer modifiers extend/improve the expected life of …

Rail-To-Rail Operational In Low-Power Reconfigurable Analog Circuitry, Jared Dale Baker

Graduate Theses, Dissertations, and Problem Reports (ETD)

Analog signal processing (ASP) can be used to decrease energy consumption by several orders of magnitude over completely digital applications. Low-power field programmable analog arrays (FPAA) have been previously used by analog designers to decrease energy consumption. Combining ASP with an FPAA, energy consumption of these systems can be further reduced. For ASP to be most functional, it must achieve rail-to-rail operation to maintain a high dynamic range. This work strives to further reduce power consumption in reconfigurable analog circuitry by presenting a novel data converter that utilizes ASP and rail-to-rail operation. Rail-to-Rail operation is achieved in the data converter …

Mapping Surficial Geology In The New River Gorge National River And Bluestone National Scenic River, West Virginia, Using Lidar-Derived Digital Elevation Data, Marla K. Denicola

Graduate Theses, Dissertations, and Problem Reports (ETD)

The purpose of this thesis was to determine if the surficial geology of Bluestone National Scenic River (BLUE) and New River Gorge National River (NERI), two areas of similar geology, can be mapped using visual interpretation methods applied to digital elevation models (DEMs) derived from light detection and ranging (LiDAR) data. Surficial geology in BLUE was field mapped using GPS, following definitions and characterizations for surficial geology units established with the guidance of Dr. J. Steven Kite. A 2m x 2m LiDAR-derived DEM was used for BLUE and most of NERI using US Army Corps of Engineers (USCOE) LiDAR data, …

Evaluating Inorganic Feed Phosphate Type And Further Potential Of Phytase Supplementation Using A Commercial Broiler Model, Angela Elsie Lamp

Graduate Theses, Dissertations, and Problem Reports (ETD)

Optimizing feed formulation of poultry diets may be achieved by proper utilization of nutrients and feed additives. This will provide a less expensive and nutrient efficient diet to the bird. An experiment was conducted to evaluate early broiler performance, tibia mineralization, and mineral digestibility of broilers fed diets that differed in inorganic feed phosphates (IFP) but that were formulated to be either similar in dietary non-phytate phosphorus (nPP) and calcium to phosphorus ratio (Ca:P), total mineral content, or calculated prececal digestible phosphorus (CPDP). Dicalcium phosphate (DCP), monodicalcium phosphate (MDP), monocalcium phosphate (MCP), and defluorinated phosphate were used in formulations with …

Deep Learning Based Face Detection And Recognition In Mwir And Visible Bands, Suha Reddy Mokalla

Graduate Theses, Dissertations, and Problem Reports (ETD)

In non-favorable conditions for visible imaging like extreme illumination or nighttime, there is a need to collect images in other spectra, specifically infrared. Mid-Wave infrared (3-5 microm) images can be collected without giving away the location of the sensor in varying illumination conditions. There are many algorithms for face detection, face alignment, face recognition etc. proposed in visible band till date, while the research using MWIR images is highly limited. Face detection is an important pre-processing step for face recognition, which in turn is an important biometric modality. This thesis works towards bridging the gap between MWIR and visible spectrum …

Time-Dependent Reliability Framework For Durability Design Of Frp Composites, Rajneesh Kumar Bharil

Graduate Theses, Dissertations, and Problem Reports (ETD)

The life-cycle performance, durability, and aging characteristics of Fiber Reinforced Polymer (FRP or Structural Composites) have been of keen interest to the engineers engaged in the FRP design, construction, and manufacturing. Unlike conventional construction materials such as steel and concrete, the design guidelines to account for the aging of FRP are somewhat scattered or not available in an approved or consistent format. Loss of strength over time or aging of any structural material should be of concern to engineers as the in-service lifespan of many engineering structures is expected to exceed 100 years. Use of durability strength-reduction factors or factors …

Integrated Techno-Economic And Life Cycle Analyses Of Biomass Utilization For Value-Added Bioproducts In The Northeastern United States, Yuxi Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

A multi-stage spatial analysis was first conducted to select locations for lignocellulosic biomass-based bioproduct facility, using Geographical Information System (GIS) spatial analysis, multi-criteria analysis ranking algorithm, and social-economic assessment. A case study was developed to determine locations for lignocellulosic biorefineries using feedstocks including forest residue biomass and three energy crops for 13 states in the northeastern United States. In the entire study area, 11.1% of the counties are high-suitable, 48.8% are medium-suitable for biorefinery siting locations. A non-parametric analysis of cross-group surveys showed that preferences on biorefinery siting are homogeneous for experts in academia and industry groups, but people in …

Multi-Objective Optimization Of A Ridesharing System Performance, Mohammad Nasr Azadani

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ridesharing is a shared vehicle service with the potential to meet the growing travel demand due to population increase, economic growth, and shortage in transportation infrastructure capacity. Compared to the current system of predominantly using personal vehicles, ridesharing services reduce the number of vehicles while providing mobility services to the same number of people with no additional investment in the transportation infrastructure. One of the big challenges in implementing ridesharing services is matching drivers and riders. Conflicts between matching-objectives to comply with the interests of diverse stakeholders influence the efficiency of ridesharing in a transportation system. This study investigates the …

Exploring The Challenges Of Social Integration Within An Upper-Level Public Relations Classroom, Tabitha Hayley Dyer

Graduate Theses, Dissertations, and Problem Reports (ETD)

Despite three decades of literature that has explored the gender imbalance of public relations at a professional level, there is a dearth of information addressing if or how these experiences are informed at a collegiate level. Accordingly, this study examines if the gender imbalance impacts students in the upper-level public relations classroom, and the similarities and differences exist between other single-gender dominant programs including nursing and Science, Technology, Engineering, and Mathematics (STEM) using three dimensions (i.e., role strain, teamwork, and overall social environment) as a comparison. Using qualitative in-depth interview data collected from 13 junior- and senior-standing public relations students …

Evaluating The Polishing Of Skid Aggregates In Asphalt Using The British Pendulum Tester, Allison Nicole Givens

Graduate Theses, Dissertations, and Problem Reports (ETD)

To ensure the pavements in West Virginia have adequate skid resistance the Division of Highways evaluates and approves skid resistant aggregate sources for all wearing courses on roads with an ADT of 3,000 or greater. Unfortunately, the supply of skid aggregates in West Virginia is depleting quickly. To find a potential alternative to using skid resistant aggregates, laboratory polishing of asphalt samples was performed using a Circular Track Polishing Machine, and friction was tested using a British Pendulum Tester. The experiment was designed to investigate how a specific aggregate type provides skid resistance to a hot asphalt mixture.

The objective …

Monotonic Response Of Rc Exterior Beam-Column Joints Reinforced With Filler-Modules And Frp Composite Wraps/Gussets, Praveen Kumar Reddy Majjigapu

Graduate Theses, Dissertations, and Problem Reports (ETD)

A review of post-earthquake reconnaissance studies revealed that reinforced concrete (RC) structures, designed and built before the development of Uniform Building Code (UBC) seismic design guidelines in 1976, have suffered complete collapse or severe damages due to the brittle failure of exterior beam-column joints. Over the past 50 years, several studies were conducted to strengthen exterior joints of in-service structures, with limited emphasis on developing simple, economic and durable repair strategies to improve energy absorption through large inelastic joint deformations. Even less emphasis was devoted to developing repair procedures that minimize stress-concentrations at joint corners and enhancing the strength, ductility, …

Procedure For Asphalt Mixture Friction Evaluation For Wvdoh, Danielle Marie Hoyer

Graduate Theses, Dissertations, and Problem Reports (ETD)

Monitoring asphalt skid resistance in the laboratory could aid in improved friction prediction capabilities and provide insight for developing alternative asphalt mixture designs in the future. The West Virginia Department of Highways (WVDOH) sought the design of a laboratory accelerated asphalt polishing machine to further expand on current skid resistance measurement practices. The design is modeled after the North Carolina State University (NCSU) polishing machine detailed in ASTM E660. The purpose of this research was to develop a testing procedure for the polishing equipment. Friction was monitored with the British Pendulum Tester (BPT) according to ASTM E303.

Specimens were prepared …