Digital Commons Network^™

Cyber Physical Security Of Avionic Systems, Anusha Thudimilla

Doctoral Dissertations

“Cyber-physical security is a significant concern for critical infrastructures. The exponential growth of cyber-physical systems (CPSs) and the strong inter-dependency between the cyber and physical components introduces integrity issues such as vulnerability to injecting malicious data and projecting fake sensor measurements. Traditional security models partition the CPS from a security perspective into just two domains: high and low. However, this absolute partition is not adequate to address the challenges in the current CPSs as they are composed of multiple overlapping partitions. Information flow properties are one of the significant classes of cyber-physical security methods that model how inputs of a …

Evaluation Of The Performance Of Different Polymer Gel Systems As An In-Depth Gel Treatment Using Numerical Simulation, Tariq K. Khamees

Doctoral Dissertations

"Oil production from heterogeneous and naturally fractured reservoirs are usually hindered due to the presence of high-permeability streaks and natural fractures networks. Oil production could be more lowered if there is a crossflow from the high- to the low-permeability layers and high mobility ratio. These problems are called conformance problems and the treatment is called conformance improvement technologies (CITs). The aims of CIT is to correct the heterogeneity of the reservoir and to lower the unfavorable mobility ratio. These technologies are leading to the diversion of post-treatment water into the low-permeability layers and to increase the viscosity of the displacing …

Minimizing The Detrimental Effects Of Hydro-Peaking On Riverbank Instability: The Lower Osage River Case, Wesam Sameer Mohammed-Ali

Doctoral Dissertations

"The fluctuation of water level downstream from dams due to hydropower flow releases negatively affects the riverbank stability. Therefore, this research aims to examine the feasibility of using an optimization technique to mitigate the riverbank instability resulting from the outflow variation of hydropower plants. The effects of the water releases from the Bagnell Dam were investigated by computing a series of safety factors for 78 cross sections along the 81-mile stretch of the lower Osage River in relation to outflow events by using the integrated BSTEM model incorporated into the HEC-RAS model. The 1-D sediment transport and unsteady flow in …

Impact Of Turbulence Models And Shape Parameterization On Robust Aerodynamic Shape Optimization, Aslihan Vuruskan

Doctoral Dissertations

"Aerodynamic design optimization is typically performed at fixed flight conditions, without considering the variation and uncertainty in operating conditions. The objective of robust aerodynamic optimization is to design an aerodynamic configuration, which will keep its optimum performance under varying conditions such as the speed of aircraft. The primary goal of this study was to investigate the impact of turbulence models used in RANS simulations on the 2-D airfoil and 3-D wing designs obtained with gradient-based deterministic and robust optimization in transonic, viscous, turbulent flows. The main contribution of this research to the aerodynamic design area was to quantify the impact …

Modeling A Nuclear Research Reactor And Radiation Dose Estimation In An Accident Scenario, Abdulaleem Abdulmajeed Bugis

Doctoral Dissertations

“A detailed, flexible three-dimensional (3D) model of the Missouri S&T Reactor (MSTR) with a heterogeneous core geometry was developed using the Standardized Computer Analyses for Licensing Evaluation (SCALE). A Graphical User Interface (GUI) was developed for SCALE, which allows the user to generate an input file automatically. The SCALE model was validated with a Monte Carlo N-Particle Transport (MCNP) model of the MSTR. The validation process was based on the criticality calculations using the Criticality Safety Analysis Sequence (CSAS6). Three geometrical models were examined. The SCALE model that has the full detailed geometry showed a good agreement with the MCNP …

Novel Approaches For Reliable And Efficient Circuit Design, Prashanthi Metku

Doctoral Dissertations

"In this research work, a suite of approaches are presented to improve reliability of 3D heterogeneous processors (3DHP) and to reduce the area overhead of asynchronous designs. This work is primarily divided into two parts. In the first part, we present an approach for improving reliability in 3DHP. Typically, in 3DHP, thermal hotspots introduce spatial and temporal variability that results in wide bit error variation in DRAM dies. To address this issue multi- path BCH decoder is introduced. Based on the thermal gradient data generated by on-chip temperature sensors, the proposed methodology specializes in adaptively estimating the number of errors …

Fabrication Of Micro-/Nanofluidic Models And Their Applications For Enhanced Oil Recovery Mechanism Study, Yandong Zhang

Doctoral Dissertations

”Micro-/nanofluidic model, as a potential powerful tool, has been used for decades for investigating fluid flow at pore-scale in energy field. It is still increasingly imperative nowadays to use different micromodels to direct observe pore-level fluid flow and analyze mechanisms of different enhanced oil recovery methods. In this work, three main tasks including three dimensional micromodels (1D,2D,3D) are proposed to fabricate and use for investigating different mechanisms of different enhanced oil recovery methods. For 1D capillary tube micromodel, we fabricate and use it to investigate the dynamics of a trapped oil droplet under seismic vibration. Seismic stimulation is a promising …

Seismic Behavior Of Composite Bridge Columns, Mohanad M. Abdulazeez

Doctoral Dissertations

“This study investigates experimentally and numerically the seismic behavior of large-scale hollow-core fiber-reinforced polymer-concrete-steel (HC-FCS) innovative bridge columns as a sustainable approach to endure and rapidly recover from natural disasters such as earthquakes. The HC-FCS column consisted of a concrete shell sandwiched between an outer fiber-reinforced polymer (GFRP) tube and an inner steel tube to provided continuous confinement for the concrete shell along with the height of the column. The columns have a slender inner steel tube with diameter-to-thickness (D_s/t_s) ratios ranged between 85 to 254. Each steel tube was embedded into the footing, while the …

Deep Learning For Digitized Histology Image Analysis, Sudhir Sornapudi

Doctoral Dissertations

“Cervical cancer is the fourth most frequent cancer that affects women worldwide. Assessment of cervical intraepithelial neoplasia (CIN) through histopathology remains as the standard for absolute determination of cancer. The examination of tissue samples under a microscope requires considerable time and effort from expert pathologists. There is a need to design an automated tool to assist pathologists for digitized histology slide analysis. Pre-cervical cancer is generally determined by examining the CIN which is the growth of atypical cells from the basement membrane (bottom) to the top of the epithelium. It has four grades, including: Normal, CIN1, CIN2, and CIN3. In …

Factors Impacting The Transport And Enhanced Oil Recovery Potential Of Polymeric Nanogel In Sandstone, Haifeng Ding

Doctoral Dissertations

"Enhanced oil recovery (EOR) using nanometer-sized particles has drawn great attention in the oil industry because of their various advantages brought by size. However, their applications on a field scale are very limited, especially for deformable nanoparticles. The objective of this research is to explore the transport behavior of deformable polymeric nanoparticles (nanogel), the factors impacting these behavior, and their EOR potentials. First, 240 published nanoparticle core flooding experiment data were collected and analyzed about the extent to what the nanoparticles can improve oil recovery. Results show that on the laboratory scale the incremental oil recovery could be as high …

Characterization And Recyclability Of 304l Stainless Steel Powder For Use In The Selective Laser Melting Process, Austin Taylor Sutton

Doctoral Dissertations

"Powder-bed fusion refers to a subset of additive manufacturing (AM) methods which successively melts and solidifies selected regions within a powder bed on a layer-by-layer basis to construct components directly from computer-aided design files. Laser Powder-Bed Fusion (L-PBF) is a process among the powder-bed fusion techniques that utilizes a laser to consolidate particles into a material with little porosity. During the L-PBF process, the large energy input from the laser causes the production of ejecta in the form of laser spatter and condensate, both of which have the potential to settle in the surrounding powder bed compromising its reusability. In …

Studies On The Stability Of Plasma Proteins And Their Fragments, Paul Praveen Nakka

Doctoral Dissertations

“The stability of a protein-based biological drug is an important concern during processing, storage or patient administration. There are various forces which contribute to the stabilizing of proteins. Both hydrogen bonds and hydrophobic interactions play an important role in protein stability. Improper folding or misfolding of proteins leads to aggregation, which is a major problem found in the bioprocessing industry. The objectives of this research are: 1) to determine the effect of environmental factors such as pH, temperature, additives or salts, and cosolvents on the stability human serum albumin (HAS), which is the most abundant protein in plasma, 2) to …

Removal Of Non-Metallic Inclusions From Molten Steel By Ceramic Foam Filtration, Soumava Chakraborty

Doctoral Dissertations

”Ceramic filters are routinely used in steel foundries to remove non-metallic inclusions from steel melt. Removal efficiency for both solid and liquid inclusions by magnesia-stabilized zirconia foam filters (10ppi) were evaluated and distribution of the captured inclusions through the filter thickness was also investigated. A mold design was developed using a commercial computational fluid dynamics software package to produce two castings that fill simultaneously, one with a filter and the other without a filter, from a single ladle pour, while also matching the fill rates and avoid turbulence and reoxidation during pouring. An industrial-scale experiment was also performed to investigate …

Development Of Novel Materials And Processes For Direct Conversion Of Co₂ Flue Gas To Chemicals And Fuels, Ahmed Al-Mamoori

Doctoral Dissertations

“This research focused on addressing the pressing issues of greenhouse gas emissions that greatly contribute to climate change. Specifically, the focus was given to the reduction of anthropogenic CO₂ emission and its subsequent conversion to commodity chemicals and fuels. In the first part of the research, a series of novel high temperature CO₂ adsorbents including double salts (K-Ca and Na-Ca) and metal-doped calcium oxide (Fe_x@CaO and Ga_x@CaO) was developed and evaluated. Both sets of materials exhibited high CO₂ capacity, fast kinetics, and long-term stability. In particular, at 650 °C, the doped adsorbents comprising …

Development Of A Modeling Algorithm To Predict Lean Implementation Success, Richard Charles Barclay

Doctoral Dissertations

”Lean has become a common term and goal in organizations throughout the world. The approach of eliminating waste and continuous improvement may seem simple on the surface but can be more complex when it comes to implementation. Some firms implement lean with great success, getting complete organizational buy-in and realizing the efficiencies foundational to lean. Other organizations struggle to implement lean. Never able to get the buy-in or traction needed to really institute the sort of cultural change that is often needed to implement change. It would be beneficial to have a tool that organizations could use to assess their …

Modeling And Optimization Of Froth Flotation Of Low-Grade Phosphate Ores: Experiments And Machine Learning, Ashraf Alsafasfeh

Doctoral Dissertations

”In this research work, bench-scale and micro-scale flotation tests were conducted to separate “minerals from silicate minerals using direct and reverse flotation approaches, respectively. Experiments were conducted at different flotation conditions including reagents’ type, reagents’ dosages, pulp’s pH, and flotation time.

In the direct flotation process, two polymers were selected to promote the depression of silicates: hybrid polyacrylamide-based polymers (Hy-PAM) and chitosan. Results indicated that the highest recovery of P₂O₅ (86.82%) was obtained when the Hy-PAM polymer was used compared with 66.7% and 40% when chitosan and commercial inorganic depressant were used, respectively. The experimental datasets obtained …

Catalytic Utilization Of Carbon Dioxide As Renewable Feedstock For Production Of Chemicals And Fuels, Abbas Alaa Jawad

Doctoral Dissertations

"The utilization of CO₂ as a renewable feedstock for producing commodity chemicals and fuels is an interesting challenge to explore new concepts and opportunities in catalysis and industrial chemistry. This sustainable approach not only leads to production of useful chemicals, but also has the potential to mitigate anthropogenic CO₂ emissions to the atmosphere. CO₂ itself is a sustainable and inexhaustibly available carbon source, however, it is inextricably linked to its inherent inertness. It is a thermodynamically stable molecule (ΔG_f = -394.01 kJ.mol^-1) with high oxidation state, hence, reactions of CO₂ must be combined …

Hydrokinetic Turbine Composite Blades And Sandwich Structures: Damage Evaluation And Numerical Simulation, Mokhtar Fal

Doctoral Dissertations

“Composite materials are gaining interest due to their high strength to weight ratio. This study deals with both experimental and numerical approaches to cover the aspects of the failure of composite materials in hydrokinetic turbine applications. In Part I, the location and magnitude of failure in the horizontal axis water turbine carbon fiber-reinforced polymer (CFRP) composite blades with different laminate stacking sequences were investigated. Two lay-up orientations were adopted for this work ([0⁰]₄ and [0⁰/90⁰]_2s). A finite element analysis model was generated to examine the stresses along the blade. Five angles were introduced to study the effect …

Comprehensive Study Of Bio-Diesel Continuous Flow Synthesis, Aso A. Hassan

Doctoral Dissertations

“Energy has become an indispensable factor in preserving economic growth since the commencement of the industrial revolution. In recent years, biodiesel has gained acceptance as a notable alternative to the widely used petroleum-derived diesel fuel because it is biodegradable, non-toxic, and generates fewer exhaust pollutants. Recently, biodiesel studies have focused on the development of process intensification technologies to resolve some technical challenges facing biodiesel production, such as long residence times and catalyst sensitivity. These intensification technologies enhance process mass/heat transfer to achieve a continuous, scalable process that can be easily transported to utilize locally available feed stocks. Five phases have …

Transition Metal Chalcogenide Hybrid Systems As Catalysts For Energy Conversion And Biosensing, Siddesh Umapathi

Doctoral Dissertations

"Generation of hydrogen and oxygen through catalyst-aided water splitting which has immense applications in metal air batteries, PEM fuel cells and solar to fuel energy production, has been one of the critical topics in recent times. The state of art oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen evolution reaction (HER) catalysts are mostly comprised of precious metals. The current challenge lies in replacing these precious metal-based catalysts with non-precious earth-abundant materials without compromising catalytic efficiency.

This research explores mixed metal selenides containing Fe-Ni, Fe-Co and RhSe which were hydrothermally synthesized and/or electrodeposited and tested for OER and ORR …

Application Of Geophysics And Remote Sensing Techniques For Economic Mineral Exploitation In Libya, Awad Abdussalam Henish Lemnifi

Doctoral Dissertations

“This study investigates crustal thickness and properties within the north central Africa region. Results obtained from 15 seismic stations belonging to the Libyan Center for Remote Sensing and Space Science are reported, in addition to 3 seismic stations publically available, using receiver functions, the first P-to-S receiver function investigation of the 410 km and 660 km depth discontinuities bounding the mantle transition zone (MTZ), and P wave tomography methods. The results from the first method show crustal thicknesses ranging from 24 km to 36 km (with uncertainties ranging between ±0.10 km and ±0.90 km). More specifically, crustal thickness ranges from …

Additive Manufacturing Of Customized Lithium-Ion Batteries: Process Fundamentals And Applications, Xiaowei Yu

Doctoral Dissertations

“In the pasting decades, considerable efforts have been spent in developing the next-generation lithium-ion batteries (LIBs), from advanced active materials to new manufacturing methods. The development of additive manufacturing (AM) has brought new opportunities to LIBs. In this work, two AM methods are introduced for fabricating electrodes of LIBs. The first method is aerosol printing, which is a solvent-based wet additive method. Whereas the second method is a solvent-free, dry printing method. The commonly used materials for current collectors and active materials (including cathodes and anodes) of LIBs are aerosol printed and the electrochemical functionalities of the printed materials are …

Forming And Processing Of Advanced Fiber Reinforced Polymer Composites, Robert Meinders

Doctoral Dissertations

“Composite materials are commonly used in industry to manufacture strong and lightweight structures. Composites feature a large degree of flexibility in materials selection and manufacturing processes to tailor the strength of manufactured parts. This study examines different manufacturing aspects of composites. In Part I, the fabrication of composite parts using the compression forming process is examined. During compression forming, metal dies are used to apply large deformations to prepreg material to fabricate composite parts. The high stresses and deformations of this process can yield manufacturing defects. T650/5320-1 prepreg is subjected to material characterization to develop simulations of large deformation forming …

Finite Time Suboptimal Control Design Of Nonlinear Systems With Θ-D Technique And Implementation To Aerospace Applications, Jie Yao

Doctoral Dissertations

“A finite time suboptimal control strategy (named θ - D approximated algorithm) was proposed in this study, which can provide the control engineers with a novel effective and efficient design tool from the finite time optimal perspective. Based on the framework of this proposed method, the original nonlinear dynamics were formulated in pseudo-linear form, and the performance index was denoted by a linear quadratic regulator prototype in this research. After that, the approximated solutions to intractable Hamilton-Jacobi-Bellman (HJB) equation were acquired by putting vanishing perturbation terms into the performance index. By tuning the parameters in perturbation terms, semi-global stability and …

Investigating The Factors Impacting The Success Of Immiscible Carbon Dioxide Injection In Unconventional Shale Reservoirs: An Experimental Study, Sherif M. Fakher

Doctoral Dissertations

"Unconventional shale reservoirs are currently gaining significant interest due to the huge hydrocarbon volumes that they bear. Enhanced oil recovery (EOR) techniques have been suggested to increase recovery from shale reservoirs. One of the most promising EOR methods is gas EOR (GEOR), most notably carbon dioxide (CO₂). Not only can CO₂ increase oil recovery by interacting with the oil and the shale, but it has also been shown to adsorb to the shale rock and thus is effective in both EOR applications and also carbon storage purposes. This research aims to experimentally investigate several of the interactions …

Observer-Based Event-Triggered And Set-Theoretic Neuro-Adaptive Controls For Constrained Uncertain Systems, Abdul Ghafoor

Doctoral Dissertations

"In this study, several new observer-based event-triggered and set-theoretic control schemes are presented to advance the state of the art in neuro-adaptive controls. In the first part, six new event-triggered neuro-adaptive control (ETNAC) schemes are presented for uncertain linear systems. These comprehensive designs offer flexibility to choose a design depending upon system performance requirements. Stability proofs for each scheme are presented and their performance is analyzed using benchmark examples. In the second part, the scope of the ETNAC is extended to uncertain nonlinear systems. It is applied to a case of precision formation flight of the microsatellites at the Sun-Earth/Moon …

Mesh Networking And Full-Duplex Communication For Wireless Networks, Arul Mathi Maran Chandran

Doctoral Dissertations

“Connectivity with large coverage area; and an increase in spectral efficiency of communications are highly desired features for any wireless network. The presented research work addresses these two feature improvements. First, the work analyzed mesh networks to enhance connectivity for wireless networks. The work analyzed both homogeneous and heterogeneous mesh networks. The work includes the development of an Android application to enable smartphones with multiple interfaces, such as Wi-Fi, Bluetooth, and cellular services, to become convergence devices. These convergence devices are then used to build a heterogeneous mesh network improving connectivity and coverage area. Second, the work explored full-duplex communications, …

Combustion And Emission Characteristics Of Ic Engines Fueled By Hydrogen And Hydrogen/Diesel Mixtures And Multi-Objective Optimization Of Operating Parameters, Abdulhakim Issa Jabbr

Doctoral Dissertations

“The present study considers combustion of hydrogen in IC engines. In general, the work focuses on simulating the engine performance and emissions at different operation parameters, and using optimization techniques. Task I work deals with the engine performance and emissions of a single cylinder spark-ignition (SI) engine fueled by hydrogen. The engine was simulated at different equivalence ratios, exhaust gas recirculation (EGR) and ignition timing. The results indicate that NOx emissions, engine power, and efficiency are reduced by increasing EGR level, and increased with increasing equivalence ratio and advanced ignition timing. The best operating conditions for hydrogen engines were obtained …

Time- And Space-Dependent Uncertainty Analysis And Its Application In Lunar Plasma Environment Modeling, Xinpeng Wei

Doctoral Dissertations

”During an engineering system design, engineers usually encounter uncertainties that ubiquitously exist, such as material properties, dimensions of components, and random loads. Some of these parameters do not change with time or space and hence are time- and space-independent. However, in many engineering applications, the more general time- and space-dependent uncertainty is frequently encountered. Consequently, the system exhibits random time- and space-dependent behaviors, which may result in a higher probability of failure, lower average lifetime, and/or worse robustness. Therefore, it is critical to quantify uncertainty and predict how the system behaves under time- and space- dependent uncertainty. The objective of …

Process Intensification Of Fuel Synthesis And Electrolysis, Jeremy Lee Hartvigsen

Doctoral Dissertations

”As more renewable energy is added to the electric grid, energy storage becomes a high priority. Suggestions have been made for energy storage in the form of fuel and chemicals. Currently, Solid Oxide Electrolysis systems can operate in endothermic mode and reduce the electrical requirement by supplying heat. Fuel synthesis from syngas is exothermic and can supply heat. However, the temperature mismatch in the normal operation of the electrolysis step and fuel synthesis step makes the direct utilization of this heat impossible. This work explores possibilities of alternate arrangements of coupling electrochemical systems and chemical synthesis. This work also explores …