Digital Commons Network^™

Chemically-Bonded Enamel-Coated Steel Pipelines For Corrosion Protection And Flow Efficiency, Liang Fan

Doctoral Dissertations

"This study is to explore and develop chemically-bonded enamel coating (200-300 um) on steel pipes, when subjected to soil and thermal environments, in order to improve the corrosion protection and safety of hazardous liquid and natural gas pipelines while reducing pressure loss. Out of five types of enamels and their various mixtures, Tomatec slurry and GP2118 powder were selected for steel pipeline applications. They were applied at approximately 810 °C to the inside surface of steel pipes in wet and electrostatic processes, respectively. The thickness and surface roughness of the enamel coating were measured using a gauge and an optical …

Time-Dependent Reliability Methodologies With Saddlepoint Approximation, Zhangli Hu

Doctoral Dissertations

"Engineers always encounter time-dependent uncertainties that ubiquitously exist, such as the random deterioration of material properties and time-variant loads. Therefore the reliability of engineering systems becomes time-dependent. It is crucial to predict the time-dependent reliability in the design stage, given possible catastrophic consequences of a failure. Although extensive research has been conducted on reliability analysis, estimating the reliability accurately and efficiently is still challenging. The objective of this work is to develop accurate and efficient reliability methodologies for engineering design. The basic idea is the integration of traditional reliability methods with saddlepoint approximation (SPA), which can accurately approximate the tail …

Transient Multiphase Flow Simulation For Unloading Of Frac Hit Gas Wells, Miguel Angel Cedeno Moreno

Doctoral Dissertations

"This work seeks to develop a fully step-by-step transient multiphase flow simulation valid for unloading gas wells using nitrogen. It studies the behavior of nitrogen for unloading horizontal gas wells with gas injection in the annulus. The work investigates unloading non-Newtonian fluids such as those which invade offset wells when a frac hit occurs during hydraulic fracturing operations in unconventional wells. The effect of varying tubing depth and injection pressure are included in the study.

Results show that as the plastic viscosity increases, the nitrogen volume and time to unload will be increased. As tubing depth increases, the nitrogen volume …

Assessment And Prediction Of Surface Water Vulnerability From Non-Point Source Pollution In Midwestern Watersheds, Fadhil K. Jabbar

Doctoral Dissertations

"Non-point source pollution is the leading cause of impairment in surface water in the Midwest. In this research, we seek to predict which watersheds are most vulnerable to point source pollution without field sampling using publically available GIS databases. Watersheds with higher vulnerability ratings can then be targeted for water quality monitoring, and funds used to improve watershed health can be distributed with greater efficacy. To better understand and target watershed vulnerability, we used three different approaches. In the first project, 35 sub-watersheds were sampled in the Lower Grand Watershed, which is a highly agricultural watershed in northern Missouri/southern Iowa. …

Detection And Elimination Of Rock Face Vegetation From Terrestrial Lidar Data Using The Virtual Articulating Conical Probe Algorithm, Kenneth John Boyko

Doctoral Dissertations

"A common use of terrestrial lidar is to conduct studies involving change detection of natural or engineered surfaces. Change detection involves many technical steps beyond the initial data acquisition: data structuring, registration, and elimination of data artifacts such as parallax errors, near-field obstructions, and vegetation. Of these, vegetation detection and elimination with terrestrial lidar scanning (TLS) presents a completely different set of issues when compared to vegetation elimination from aerial lidar scanning (ALS). With ALS, the ground footprint of the lidar laser beam is very large, and the data acquisition hardware supports multi-return waveforms. Also, the underlying surface topography is …

Freeform Extrusion Fabrication Of Advanced Ceramics And Ceramic-Based Composites, Wenbin Li

Doctoral Dissertations

"Ceramic On-Demand Extrusion (CODE) is a recently developed freeform extrusion fabrication process for producing dense ceramic components from single and multiple constituents. In this process, aqueous paste of ceramic particles with a very low binder content ( < 1 vol%) is extruded through a moving nozzle to print each layer sequentially. Once one layer is printed, it is surrounded by oil to prevent undesirable water evaporation from the perimeters of the part. The oil level is regulated just below the topmost layer of the part being fabricated. Infrared radiation is then applied to uniformly and partially dry the top layer so that the yield stress of the paste increases to avoid part deformation. By repeating the above steps, the part is printed in a layer-wise fashion, followed by post-processing. Paste extrusion precision of different extrusion mechanisms was compared and analyzed, with an auger extruder determined to be the most suitable paste extruder for the CODE system. A novel fabrication system was developed based on a motion gantry, auger extruders, and peripheral devices. Sample specimens were then produced from 3 mol% yttria stabilized zirconia using this fabrication system, and their properties, including density, flexural strength, Young's modulus, Weibull modulus, fracture toughness, and hardness were measured. The results indicated that superior mechanical properties were achieved by the CODE process among all the additive manufacturing processes. Further development was made on the CODE process to fabricate ceramic components that have external/internal features such as overhangs by using fugitive support material. Finally, ceramic composites with functionally graded materials (FGMs) were fabricated by the CODE process using a dynamic mixing device"--Abstract, page iv.

Laser Welding Of Metallic Glass To Crystalline Metal In Laser-Foil-Printing Additive Manufacturing, Yingqi Li

Doctoral Dissertations

"The application of metallic glasses has been traditionally limited to parts with small dimensions and simple geometries, due to the requirement of fast cooling during the conventional process of casting. In addition, joining metallic glass to crystalline metal is of interest for many applications that require locally tailored functions and properties, but it is challenging. This research describes a promising additive manufacturing technology, i.e., laser-foil-printing, to make high-quality metallic glass parts with large dimensions and complex geometries and to fabricate multi-material components from metallic glass and crystalline metal. In this research, Zr_52.5Ti₅Al₁₀Ni_14.6Cu …

Solvent-Free Additive Manufacturing Of Electrodes For Li-Ion Batteries, Brandon Joshua Ludwig

Doctoral Dissertations

"A new Li-ion battery electrode manufacturing process using a solvent free additive manufacturing method has been developed. Li-ion battery electrodes consist of active material particles, a binder additive, and a conductive additive. Traditionally, Li-ion battery electrodes are manufacturing using the "slurry casting" technique. In this method, the electrode materials are mixed with a solvent to create a slurry. Electrodes fabricated in this method are readily implemented for small platforms, such as portable electronics. However, this method isn't as economically viable in large platforms due to high material and manufacturing costs. High material and manufacturing costs are mostly attributed to the …

Atomistic Simulations Of Deformation In Metallic Nanolayered Composites, Sixie Huang

Doctoral Dissertations

"The mechanical behavior of Metallic Nanolayered Composites (MNCs) is governed by their underlying microstructure. In this dissertation, the roles of the interlayer spacing (grain size, d) and the intralayer biphase spacing (layer thickness, h) on mechanical response of Cu/Nb MNCs are examined by Molecular Dynamics (MD) simulations. The study of the strength of MNCs show that small changes in both d and h play a profound role in the relative plastic contributions from grain boundary sliding and dislocation glide. The interplay of d and h leads to a very broad transition region from grain boundary sliding dominated flow, where the …

Modeling And Simulation Of Micro/Nano-Rod Distribution In Micro Channel Flows, Saman Monjezi

Doctoral Dissertations

"The behavior of a typical nanorod particle in microscale flows was theoretically investigated, considering the effect of the wall on the rotational and translation motions of the non-spherical particle. Initially, a systematic method using Brownian dynamics simulation of the rotational motion of nanorod was performed to obtain the average orientation distribution of a nanorod in various range of Peclet number and position from the confining wall. Subsequently, the results of the angle distributions simulation were employed to generate a universal mathematical model for the particle orientation distribution, which our model of concentration distribution of high aspect ratio nanorods in the …

Techno-Economic Optimization And Environmental Life Cycle Assessment Of Microgrids Using Genetic Algorithm And Artificial Neural Networks, Prashant Nagapurkar

Doctoral Dissertations

"This dissertation focuses primarily on techno-economic optimization and environmental life cycle assessment (LCA) of sustainable energy generation technologies. This work is divided into five papers. The first paper discusses the techno-economic optimization and environmental life cycle assessment of microgrids located in the USA using genetic algorithm. In this paper, a methodology was developed that assessed the techno-economic and environmental performance of a small scale microgrid located in US cities of Tucson, Lubbock and Dickinson. Providing uninterrupted power the microgrid was composed of seven components -- solar photovoltaics, wind-turbines, lead acid batteries, biodiesel generators, fuel cells, electrolyzers and H₂ tanks. …

Quantifying Restoration Costs In The Aftermath Of An Extreme Event Using System Dynamics And Dynamic Mathematical Modeling Approaches, Akhilesh Ojha

Doctoral Dissertations

"Extreme events such as earthquakes, hurricanes, and the like, lead to devastating effects that may render multiple supply chain critical infrastructure elements inoperable. The economic losses caused by extreme events continue well after the emergency response phase has ended and are a key factor in determining the best path for post-disaster restoration. It is essential to develop efficient restoration and disaster management strategies to ameliorate the losses from such events. This dissertation extends the existing knowledge base on disaster management and restoration through the creation of models and tools that identify the relationship between production losses and restoration costs. The …

Development Of Lidar Assisted Terrestrial Radar Interferometry For Rock Deformation Monitoring, Ricardo Javier Romero Ramirez

Doctoral Dissertations

"Rock and soil slope movements cost millions of dollars annually. During the past few decades, engineers have relied on traditional methods to detect slope movements. These tools are valuable for small spatial areas but, may not be adequate or cost effective for large spatial areas. Remote sensing methods such as terrestrial laser scanning (TLS) and terrestrial radar interferometry (TRI) provide excellent spatial coverage, and with adequate post-data-processing software, sub-millimetric scale deformation sensitivity can be achieved.

This work will present a comparative experimental study between TLS and TRI. The comparative experimental study will allow us to achieve the two main objectives …

Pressure Versus Impulse Graph For Blast-Induced Traumatic Brain Injury And Correlation To Observable Blast Injuries, Barbara Rutter

Doctoral Dissertations

"With the increased use of explosive devices in combat, blast induced traumatic brain injury (bTBI) has become one of the signature wounds in current conflicts. Animal studies have been conducted to understand the mechanisms in the brain and a pressure versus time graph has been produced. However, the role of impulse in bTBIs has not been thoroughly investigated for animals or human beings.

This research proposes a new method of presenting bTBI data by using a pressure versus impulse (P-I) graph. P-I graphs have been found useful in presenting lung lethality regions and building damage thresholds. To present the animal …

Receiver Function Investigations Of Mantle Transition Zone And Crustal Structure In East Africa And Northeast Asia, Muchen Sun

Doctoral Dissertations

"In spite of numerous geophysical studies have been conducted in East Africa and Northeast Asia, the structure and evolution of the crust, upper mantle, and the mantle transition zone (MTZ) are still controversial. The MTZ discontinuities beneath the study area are imaged by stacking an unprecedented volume of receiver functions (RFs). The normal MTZ thickness beneath the Western Branch of the EARS and Tanzania Craton indicates the absence of present-day thermal upwelling from the lower mantle. In contrast, beneath the Eastern Branch, a significant MTZ thinning reveals the existence of thermal upwelling from either the upper MTZ or the lower …

Investigating Blast Fume Propagation, Concentration And Clearance In Underground Mines Using Computational Fluid Dynamics (Cfd), Raymond Ninnang Tiile

Doctoral Dissertations

"Blasting activities using standard industry explosives is an essential component of underground hard rock mining operations. Blasting operations result in the release of noxious gases, presenting both safety and productivity threats. Overestimation of post-blast re-entry time results in production losses, while underestimation leads to injuries and fatalities. Research shows that most underground mines simply standardize post-blast re-entry times based on experiences and observations. Few underground mines use theoretical methods for calculating post-blast re-entry time. These theoretical methods, however, are unable to account for the variations in the blasting conditions. Literature review shows that: (i) there is currently no means of …

Developing And Evaluating A Partition-Cavity Solar Thermochemical Reactor For Syngas Production Via Computational Fluid Dynamics, Han Zhang

Doctoral Dissertations

"Solar thermochemical processes are attractive since they have the advantages of storing solar energy as chemical fuels. In this dissertation, a partition-cavity solar thermochemical reactor was developed, and the heat and mass transfer of the solar thermochemical processes were numerically analyzed in this directly-irradiated reactor.

The reduction reaction of two-step CeO₂/CeO_2-δ solar redox process was investigated using the coupling of computational fluid dynamics (CFD) and discrete element method (DEM). The reduction rate was studied based on the catalyst textual properties and the reaction condition. The results revealed that the increase of catalyst specific surface area and the …

Building Shared Knowledge For Eor Technologies: Screening Guideline Constructions, Dashboards, And Advanced Data Analysis, Na Zhang

Doctoral Dissertations

"Successful implementation of enhanced oil recovery (EOR) technology requires comprehensive knowledge and experiences based on existing EOR projects. EOR screening guidelines and EOR reservoir analog are served as such knowledge which are considered as the first step for a reservoir engineer to determine the next step techniques to improve the ultimate oil recovery from their assets. The objective of this research work is to provide better assistance for EOR selection by using fundamental statistics methods and machine learning techniques.

In this dissertation, a total of 977 worldwide EOR projects with the most uniformed, high-quality, and comprehensive information were collected from …

Experimental Investigation Of Liquid Contact In The Developing Post-Dryout Chf Flow Boiling Regime Using Surface Mounted Thermistors, Hiralkumar Harshadbhai Patel

Doctoral Dissertations

"Understanding heat transfer in the post-critical heat flux (CHF) flow boiling regime is important for determining the performance of the heat transfer equipment for various industrial applications requiring high heat transfer rates, e.g., heat exchangers, boilers, chemical and nuclear reactors. Liquid can be present in the core of the flow channel in the form of entrained liquid droplets, especially immediately downstream of film dryout. These droplets are suspected to provide an important heat transfer mechanism as they impinge on the heated wall. The objective of the current study is to investigate liquid contact with the heated wall in this flow …

Underwater Acoustic Communications And Adaptive Signal Processing, Mohammadhossein Behgam

Doctoral Dissertations

"This dissertation proposes three new algorithms for underwater acoustic wireless communications. One is a new tail-biting circular MAP decoder for full tail-biting convolution (FTBC) codes for very short data blocks intended for Internet of Underwater Things (IoUT). The proposed algorithm was evaluated by ocean experiments and computer simulations on both Physical (PHY) and Media access control (MAC) layers. The ocean experimental results show that without channel equalization, the full tail-biting convolution (FTBC) codes with short packet lengths not only can perform similarly to zero-tailing convolution (ZTC) codes in terms of bit error rate (BER) in the PHY layer. Computer simulation …

2x-Thru, 1x-Reflection, And Thru-Line De-Embedding: Theory, Sensitivity Analysis, And Error Corrections, Bichen Chen

Doctoral Dissertations

"Due to the simplicity of design and measurement, as well as the accuracy of results, the 2X-Thru de-embedding (2XTD), 1X-Reflection de-embedding (1XRD), and Thru-Line de-embedding (TLD) have been replaced the traditional de-embedding algorithms, such as TRL and SOLT. In this dissertation, theory of 2ⁿ-port 2XTD, 1XRD, and TLD are completely derived first. The self-error reduction schemes is introduced to mitigate the de-embedding errors due to non-ideal manufacturing effects of non-zero mode conversion terms, as well as the asymmetric, and manufacturing variations. The validations are performed on both theory and self-error reduction through simulation and measurements cases. The 2X-Thru …

Electrodeposition Of Epitaxial Metal Thin Films On Silicon For Energy Conversion And Flexible Electronics, Qingzhi Chen

Doctoral Dissertations

"This research focuses on epitaxial electrodeposition of two coinage metals: Au and Ag thin films on the silicon surface and their applications in flexible electronics and energy conversion and storage. The first paper: Photoelectrochemistry of ultrathin, semi-transparent, and catalytic gold films electrodeposited epitaxially onto n-silicon (111) describes the epitaxial electrodeposition of Au thin films on n-type Si using a simple HAuCl4 bath and the photoelectrochemical properties of the Au-Si junction barrier. The effect of the Au layer on the interfacial energetics as well as the stability of the photoelectrode as a function of the Au coverage/thickness is determined in a …

Efficient Estimation And Mitigation For Radio-Frequency Interference, Qiaolei Huang

Doctoral Dissertations

"With rapid innovations in Internet of Things (IoT) and wireless technology, more and more consumer electronic devices around the world are now connected to the internet. In a small form factor electronic device, there are plenty of potential noise sources such as System On Chip (SoC), high speed traces, flexible cables and power converters, etc. Those noise sources can possibly introduce radio frequency interference (RFI) issues. In this dissertation, a transfer function based calculation method is proposed to estimate radio frequency interference (RFI) problems. The derived equations can clearly decompose the RFI problem into two parts: the noise source and …

Using Lidar To Measure Subsurface Movement Of Slow-Moving Landslides And Study The Interaction Between The Soil And Lidar Scanning Targets, Chengxun Lu

Doctoral Dissertations

"Terrestrial Laser Scanning (TLS) technology has been used for predicting and researching geological hazards for two decades. This research focuses on using LiDAR (Light Detection And Ranging) to measure the slow-moving displacement of both surface and subsurface soil of landslides. Two kinds of computer simulation software, FLAC3D® and PFC3D® were used to simulate the landslide process to compare with the LiDAR scanning results.

The primary contributions from this research are as follows:

1. Several error tests were done to prove that the three-dimensional LiDAR scanner used in this research can precisely obtain the three-dimensional position, the displacement and the rotational …

Dynamic Impact Induced By Tornadoes Through Simulations Based On Two-Way Wind-Structure Interactions, Tiantian Li

Doctoral Dissertations

"Tornadoes have become a significant cause of property damage, injuries and life losses. Investigations of tornadoes indicate that most fatalities were caused by building failure. For example, in the Joplin, MO tornado of 22 May 2011, 161 people were killed, and 84% fatalities were related to building failure. Therefore, it is imperative to develop science-based tornado-resistant building codes, in order to provide a better level of occupant protection from tornadoes and to minimize the tornado-induced damage. This requires in-depth understanding of the wind characteristics of tornadoes and their wind effects on civil structures, based on which design tornadic wind loading …

High Level Thermochemical And Spectroscopic Computations For Molecules Relevant To Combustion And The Atmosphere, Bradley K. Welch

Doctoral Dissertations

"Computational thermochemistry can be a complicated multistep process, but in recent years has become an equal partner with experiment. Many important molecules in combustion systems or in the atmosphere (such as short-lived radicals) are difficult to study experimentally. Predicting highly accurate thermochemistry is a key aspect in understanding these species. In this project, computational thermochemistry was developed into an automated streamlined procedure and then used to understand the methyl and ethyl peroxy families of radicals. This effort involved optimizing a standard workflow for computational thermochemistry. Computational thermochemistry generally requires numerous individual calculations whose cost and scalings vary widely. Conducting such …

Multiscale Spatio-Temporal Modeling Of Cell Population In Tissue Architecture And Drug Delivery Nanoparticles, Mohammad Aminul Islam

Doctoral Dissertations

"Multiscale nature of a biological system span at many order of magnitudes in time and space. Molecular interaction at lower scale is connected with the higher scale behavior of tissue or organism. Integrating the dynamics and information at different time and space can give a fundamental physiological understanding of the higher level phenomena. But complex features, functions, interconnectivity between different scales and lack of information on the fundamental physiological property make the model difficult and computationally challenging. The multiscale modeling approach can bridge the gap between different scale by a systemic integration of the complex dynamic behavior.

Here, the focus …

Spatiotemporal Modeling And Model Restructuration Approaches In Studies Of Intracellular Signalling Pathways, Md Shahinuzzaman

Doctoral Dissertations

"The main focus of the research is to understand the complex phenomena of cell transduction pathways and cell biology in a single cell. Mathematical modeling and experimental evaluation are widely used approaches for this kind of research. Firstly, A multiscale framework for protein-protein interaction has been established using Brownian dynamics algorithm. Sit specific feature, steric collision, diffusion, co-localization and complex formation with time and space has been included in this spatial modeling framework. By implementation of the time adaptive feature in this framework, the computation time reduces in an order of magnitude compared with traditional modeling framework. This multiscale Brownian …

Polyurea Aerogels: From Nanoscopic To Macroscopic Properties, Tahereh Taghvaee

Doctoral Dissertations

"The morphology of a material is intrinsically a qualitative property and in order to relate nanomorphology to synthetic conditions, it is necessary to express nano/micro-structure quantitatively. In this context, polyurea aerogels were chosen as a model system with demonstrated potential for rich nanomorphology and being guided by a statistical Design-of-Experiments model, a large array of materials (208) with identical chemical composition, but quite different nanostructures were prepared. By reflecting upon the SEM images, it was realized that our first pre-verbal impression about a nanostructure is related to its openness and texture; the former is quantified by porosity (Π), and the …

Investigating The Use Of Different Types Of Sealant Materials For Cement Remedial Applications, Murad Mohammedahmed Abdulfarraj

Doctoral Dissertations

"The overall objective is to investigate the ability of several material to mitigate cement failures such as channels, fractures, and micro-annuli in oil and gas wells. The sealant material that can also be used in the wells that are used for geologic storage of carbon dioxide CO₂. Evaluating the sealant material is critical to improve the zonal isolation of the wells, which would lead to safer operations. The approach of this dissertation is to utilize particles gel that has been used successfully in conformance control application, and epoxy resin systems, that have superior seal characteristics compared to conventional …