Digital Commons Network^™

Relevance For Food Safety Of Applications Of Nanotechnology In The Food And Feed Industry, Iona Pratt, Catherine Adley, Gordon Chambers, Wayne Anderson

Articles

The application of nanotechnology in the food and feed industry offers many potential benefits for both consumers and manufacturers.The ultrafine dimensions of nanoparticles, and consequently their very large surface area, enable them to function more effectively than conventional macro-scale structures in many applications. Nanotechnology is however a relatively new area of science and the benefits and risks associated with its use in the food and feed industry are not fully understood at this time.This brings with it new challenges in ensuring the safety of food and feed that has been produced with the aid of nanotechnology. This report provides an …

Raman Spectroscopy For The Characterization Of The Polymerization Rate In An Acrylamide-Based Photopolymer, Raghavendra Jallapuram, Izabela Naydenova, Hugh Byrne, Suzanne Martin, Robert Howard, Vincent Toal

Articles

Investigations of polymerization rates in an acrylamide-based photopolymer are presented. The polymerization rate for acrylamide and methylenebisacrylamide was determined by monitoring the changes in the characteristic vibrational peaks at 1284 cm-1 and 1607 cm-1 corresponding to the bending mode of CH bond and CC double bonds of acrylamide and in the characteristic peak at 1629 cm-1 corresponding to carbon-carbon double bond of methylenebisacrylamide using Raman spectroscopy. To study the dependence of the polymerization rate on intensity and to find the dependence parameter, the polymerization rate constant was measured at different intensities. A comparison with a commercially available photopolymer shows that …

Disability, Equipment Barriers And Women’S Health: Using The Ada To Provide Meaningful Access, Elizabeth Pendo

Articles

It is well-known that people with disabilities face multiple barriers to adequate health care, including lower average incomes, disproportionate poverty, and issues with insurance coverage. This article focuses on a more fundamental barrier-one that has not been discussed in the legal literature-inaccessible medical equipment and its effect on the delivery of women's health care to millions of women with disabilities .

Gravitational Wave Recoil Oscillations Of Black Holes: Implications For Unified Models Of Active Galactic Nuclei, Stefanie Komossa, David Merritt

Articles

We consider the consequences of gravitational wave recoil for unified models of active galactic nuclei (AGNs). Spatial oscillations of supermassive black holes (SMBHs) around the cores of galaxies following gravitational wave (GW) recoil imply that the SMBHs spend a significant fraction of time off-nucleus, at scales beyond that of the molecular obscuring torus. Assuming reasonable distributions of recoil velocities, we compute the off-core timescale of (intrinsically type-2) quasars. We find that roughly one-half of major mergers result in a SMBH being displaced beyond the torus for a time of 107.5 yr or more, comparable to quasar activity timescales. Since major …

Optimisation Of Steamer Jet-Injection To Extend The Shelf Life Of Fresh-Cut Lettuce, Daniel Rico, Ana Belen Martin-Diana, Catherine Barry-Ryan, Gary Henehan, J. Barat, Jesus Maria Frias

Articles

Optimisation of short time blanching (steaming) was investigated using response surface methodology by analysing quality and microbial and nutritional markers over the shelflife of packaged fresh-cut lettuce. Steamer treatment time (5–10 s) and storage (1–10 days) were used as independent factors in order to optimise the process. Longer treatments (>10 s) were not feasible because of extensive damage caused to lettuce tissue. Significantly (p < 0.05) higher values of luminosity (L*), greenness (−a*) and sensory panel scores (fresh appearance, general acceptability and absence of browning) were obtained with samples treated for longer times with the steamer. Activity of browning-related enzymes present in photosynthetic tissue decreased in all the cases, however, longer treatment time (7.5–10 s) was needed with vascular tissues to reduce to similar activity values. These differences could be explained by the variation in tissue thickness. The longest steam treatment (10 s) reduced and maintained significantly (p < 0.05) lower mesophilic load than shorter treatments (5–8.5 s). However, significant (p < 0.05) decreases in vitamin C and carotenoids were observed in samples treated with longer treatments. Steamer treatment of 10 s could be considered the optimum time for maintaining the shelflife (mainly texture and browning) of fresh-cut lettuce for 7–10 days in optimum conditions.

Acquiring Innovation, Xuan-Thao Nguyen, Jeffrey A. Maine

Articles

In recent years, the innovation market has witnessed a new business model involving companies that are mere patent holding shells and not operating entities. They have no customers or products to offer, but they do have an aggressive tactic of using patent portfolios to threaten other operating companies with potential infringement litigation. The strategy is executed with the end goal of extracting handsome settlements. Acquisitions of patents for offensive use have become a major concern to operating companies because such acquisitions pose the threats of patent injunction, interrupting the business and crippling further innovation.

While many operating companies today know …

Investigation On The Performance Of Upqc-Q For Voltage Sag Mitigation And Pq Improvement At A Critical Load Point, Malabika Basu, S. P. Das, Gopal Dubey

Articles

The unified power quality conditioner (UPQC) is one of the major custom power solutions, which is capable of mitigating the effect of supply voltage sag at the load end or at the point of common coupling (PCC) in a distributed network. It also prevents the propagation of the load current harmonics to the utility and improves the input power factor of the load. The control of series compensator (SERC) of the UPQC is such that it injects voltage in quadrature advance to the supply current. Thus, the SERC consumes no active power at steady state. The other advantage of the …

Covert Encryption And Document Authentication Using Texture Coding, Jonathan Blackledge, Mary Hallot

Articles

With the improvements in the quality of Commercial-Off-The-Shelf (COTS) printing and scanning devices, the ability to counterfeit documents has become a widespread problem. Consequently, there has been an increasing demand to develop digital watermarking techniques which can be applied to both electronic and printed images (and documents) that can be authenticated, prevent unauthorized copying and withstand abuse and degradation. In this paper , a new approach to digital watermarking is presented and a range of possible applications are considered. The process is defined by using concepts and techniques borrowed from Cryptography. It is based on computing a 'scramble image' by …

Multi-Algorithmic Cryptography Using Deterministic Chaos With Applications To Mobile Communications, Jonathan Blackledge

Articles

In this extended paper, we present an overview of the principal issues associated with cryptography, providing historically significant examples for illustrative purposes as part of a short tutorial for readers that are not familiar with the subject matter. This is used to introduce the role that nonlinear dynamics and chaos play in the design of encryption engines which utilize different types of Iteration Function Systems (IFS). The design of such encryption engines requires that they conform to the principles associated with diffusion and confusion for generating ciphers that are of a maximum entropy type. For this reason, the role of …

A Surface Inspection Machine Vision System That Includes Fractal Texture Analysis, Jonathan Blackledge, Dmitry Dubovitskiy

Articles

The detection, recognition and classification of features in a digital image is an important component of quality control systems in production and process engineering and industrial systems monitoring, in general. In this paper, a new pattern recognition system is presented that has been designed for the specific task of monitoring the quality of sheet-steel production in a rolling mill. The system is based on using both the Euclidean and Fractal geometric properties of an imaged object to develop training data that is used in conjunction with a supervised learning procedure based on the application of a fuzzy inference engine. Thus, …

Audio Data Verification And Authentication Using Frequency Modulation Based Watermarking, Jonathan Blackledge, Omar Farooq

Articles

An approach to watermarking digital signals using frequency modulation - ‘Chirp Coding’ - is considered. The principles underlying this approach are based on the use of a matched filter to reconstruct a ‘chirp stream’ code that is uniquely robust. The method is generic in the sense that it can, in principle, be used for a variety of different signal (the authentication of speech and biomedical signals, for example). Further, by generating a bit stream that is signal dependent, chirp coding provides a method of self-authentication, which has a wide range of applications including copyright protection and digital rights management. However, …

Object Detection And Classification With Applications To Skin Cancer Screening, Jonathan Blackledge, Dmitryi Dubovitskiy

Articles

This paper discusses a new approach to the processes of object detection, recognition and classification in a digital image. The classification method is based on the application of a set of features which include fractal parameters such as the Lacunarity and Fractal Dimension. Thus, the approach used, incorporates the characterisation of an object in terms of its texture.

The principal issues associated with object recognition are presented which includes two novel fast segmentation algorithms for which C++ code is provided. The self-learning procedure for designing a decision making engine using fuzzy logic and membership function theory is also presented and …

Proposal For Using A Studio Format To Enhance Institutional Advancement, Shannon Chance

Articles

Universities today need to become quicker on their toes. They must continually scan the environment and seize emerging opportunities – and institutional advancement must lead this effort. An unfortunate number of institutional advancement operations are ill equipped for the task at hand. Many suffer from high staff turnover and overly hierarchical systems that refl ect excessive fragmentation and compartmentalization. They inadvertently perpetuate stifl ing and unnecessary bureaucracy. Organizing advancement efforts around the metaphor of the design studio or creative workshop promises to (a) pool talent, (b) cultivate collaboration, and (c) align diverse but related interests in order to promote fruitful …

Experimental Study Of High-Temperature Smectic-C*F12 Phase In Chiral Smectic Liquid Crystals That Exhibit Phase-Sequence Reversal, K. L. Sandhya, J. K. Song, Yuri Panarin, J. K. Vij, S. Kumar

Articles

We report the results of an experimental study of a recently observed phase sequence reversal of smectic-C*FI2 [SmC*(qT=1/2); a four layer antiferroelectric] phase appearing in the temperature range above the smectic-C* (SmC*) phase from the results of optical birefringence, spontaneous polarization, selective reflection, conoscopy, and dielectric spectroscopy. The SmC*FI2 phase is observed in an antiferroelectric liquid crystalline compound, 10OHF, in a temperature range above that of SmC*A phase and is found to be thermodynamically monotropic, i.e., it appears only upon cooling from SmC*A phase. This is also unstable as if it is once transformed to SmC* by the application of …

Electro-Optic And Dielectric Study Of The De Vries-Type Smectic A* Phase Exhibiting Transitions To Smectic-C*A And Smectic-C* Phases, U. Manna, Jang-Kun Song, Yuri Panarin, Atsuo Fukuda, J. K. Vij

Articles

Mixtures of different compositions of an antiferroelectric liquid crystal compound that exhibits direct smectic-A*(Sm-A*)-smectic-C*A(Sm-C*A) transition with a ferroelectric liquid crystal compound that exhibits Sm-A*-smectic-C*(Sm-C*) transition are studied using electro-optics and dielectric spectroscopy. The results of optical texture, birefringence, and the tilt angle suggest that a part of the Sm-A* phase is of de Vries type, since an increase in the tilt angle with decreasing temperature results in a reduction in the value of the birefringence in the Sm-A* phase, whereas the birefringence at Sm-A* to Sm-C* transition goes up by 12.7%. The soft mode relaxation strength, the Landau coefficient of …

V-Shaped Electro-Optic Response Observed In A Chiral Ferroelectric Smectic Liquid Crystal, V. Manjuladevi, Yuri Panarin, Jang-Kun Song, B. K. Sadashiva

Articles

We report on the observation of V-shaped switching in a ferroelectric liquid crystal cell over a wide range of temperatures. Results of the optical transmittance in the visible region give us the helical pitch for various temperatures of the ferroelectric liquid crystalline compound used. We show that the helical pitch, in addition to the spontaneous polarization (PS) and thickness of the alignment layer of the cell, is an important factor in giving V-shaped switching. A longer or helical compensated mixture gives a better V-shaped switching. © 2008 American Institute of Physics.

Extended Nonnegative Tensor Factorisation Models For Musical Sound Source Separation, Derry Fitzgerald, Matt Cranitch, Eugene Coyle

Articles

Recently, shift-invariant tensor factorisation algorithms have been proposed for the purposes of sound source separation of pitched musical instruments. However, in practice, existing algorithms require the use of log-frequency spectrograms to allow shift invariance in frequency which causes problems when attempting to resynthesise the separated sources. Further, it is difficult to impose harmonicity constraints on the recovered basis functions. This paper proposes a new additive synthesis-based approach which allows the use of linear-frequency spectrograms as well as imposing strict harmonic constraints, resulting in an improved model. Further, these additional constraints allow the addition of a source filter model to the …

Analysis Of Financial Data Using Non-Negative Matrix Factorization, Ruairí De Fréin, Konstantinos Drakakis, Scott Rickard, Andrzej Cichocki

Articles

We apply Non-negative Matrix Factorization (NMF) to the prob-lem of identifying underlying trends in stock market data. NMF is arecent and very successful tool for data analysis including image andaudio processing; we use it here to decompose a mixture a data, thedaily closing prices of the 30 stocks which make up the Dow Jones In-dustrial Average, into its constitute parts, the underlying trends which govern the financial marketplace. We demonstrate how to impose ap-propriate sparsity and smoothness constraints on the components of thedecomposition. Also, we describe how the method clusters stocks to-gether in performance-based groupings which can be used for …

A Visual Indication Of Environmental Humidity Using A Color Changing Hologram Recorded In A Self-Developing Photopolymer, Izabela Naydenova, Raghavendra Jallapuram, Vincent Toal, Suzanne Martin

Articles

A reflection hologram for visual indication of environmental humidity has been studied. The hologram is recorded in a self-developing photopolymer and changes color when exposed to a change in humidity and is fully reversible. The range of color change, reversibility, and the response time of the hologram have been studied in a controlled humidity environment. Fully reversible holograms with response times from few seconds to tens of minutes have been designed. Extremely sensitive bright visual humidity indicators, capable of dramatic color change within a few seconds of breathing on them are demonstrated

Method For Characterization Of Diffusion Properties Of Photopolymerisable Systems, Tzvetanka Babeva, Izabela Naydenova, Suzanne Martin, Vincent Toal

Articles

A novel approach for measuring the diffusion coefficients in photopolymerisable materials is proposed. The method is based on studying the evolution of the surface relief profile in a single illuminated spot using an interferometric surface profiler. It is shown that the observed post-exposure swelling in the illuminated spot is due to mass-transport of monomer from the unexposed to the exposed area driven by a monomer concentration gradient set up by the monomer polymerization in the exposed area. Appropriate choice of the thickness of the studied layers ensures both lateral movement of monomer and negligible contribution from the depth. The diffusion …

An All-Fiber Temperature Sensor Based On A Macro-Bend Singlemode Fiber Loop, Ginu Rajan, Yuliya Semenova, Gerald Farrell

Articles

An all-fibre temperature sensor is proposed based on a macro-bend singlemode fibre loop using a ratiometric power measurement scheme. The sensor has a linear characteristic with temperature at a fixed wavelength and bend radius. A direct linear relationship between the bend loss of the singlemode fibre and temperature is reported for the first time. By measuring the change in bend loss of the system a change in temperature can be measured assuming the system is calibrated. The proposed sensor has a higher temperature resolution than other conventional fibre-optic sensors and also benefits from simplicity.

Investigation On Singlemode-Multimode-Singlemode Fiber Structure, Qian Wang, Gerald Farrell, W. Yan

Articles

This paper presents an investigation on a single-mode-multimode-single-mode fiber structure. A one-way guided-mode propagation analysis for the circular symmetry waveguide is employed to model the light propagation and the approximated formulations are derived and evaluated concerning the accuracy. Phase conjunction of the multimode interference within the fiber structure is revealed. A simple way to predict and analyze the spectral response of the structure is presented through the space to wavelength mapping with the derived approximated formulations. The prediction of spectral response is verified numerically and experimentally.

Reduction Of Ground-Plane-Dependent Effects On Microstrip-Fed Printed Rectangular Monopoles, Matthias John, Jonathan Evans, Max Ammann, J. C. Modro, Z. N. Chen

Articles

Methods to mitigate the strong dependence of impedance bandwidth on the ground- plane size for a rectangular printed planar monopole is described. It is shown that the bandwidth limitation may be overcome by introducing feed-line asymmetry, which alters the purity and the Q of the higher frequency modes and by ground-plane augmentation, which effects the lower frequency modes. A method of extending the ground plane without increasing the overall antenna size is shown to improve both the bandwidth and gain and also to enable the use of significantly smaller ground planes. The effects of these techniques on radiation pattern are …

Temperature Dependence Of Macrobending Loss In All-Fiber Bend Loss Edge Filter, Pengfei Wang, Yuliya Semenova, Gerald Farrell

Articles

A theoretical model for macrobending-induced temperature dependent loss (TDL) for a standard singlemode fiber (SMF28) with dual coating layers is presented, with good agreement demonstrated between theoretical calculations and experimental results. The impact of temperature on two examples of an all-fiber based edge filter is also investigated theoretically and experimentally and using the developed model, it is shown that it is possible to predict the impact of temperature variations on an all-fiber based edge filter.

Effect Of Carbon Black On The Mechanical Performances Of Magnetorheological Elastomers, Lin Chen

Articles

Several magnetorheological elastomer (MRE) samples, with different weight percentages of carbon black, were fabricated under a constant magnetic field. Their microstructures were observed by using an environmental scanning electron microscope (SEM), and their mechanical performance including magnetorheological (MR) effect, damping ratio and tensile strength were measured with a dynamic mechanical analyzer (DMA) system and an electronic tensile machine. The experimental results demonstrate that carbon black plays a significant role in improving the mechanical performance of MR elastomers. Besides the merits of high MR effect and good tensile strength, the damping ratio of such materials is much reduced. This is expected …

Fabrication Of Switchable Liquid Crystal Devices Using Surface Relief Gratings In Photopolymer, Pavani Kotakonda, Izabela Naydenova, Robert Howard, Suzanne Martin, Vincent Toal

Articles

Holographically recorded surface relief gratings in dry, self-developing acrylamide based photopolymer were used to fabricate two types of switchable liquid crystal (LC) device. One is an electrically switchable LC diffraction grating and the other is an electrically switchable polarization rotator. The electrically switchable diffraction grating was characterized by measuring the dependence of the intensity in the first diffracted order on the applied electric field. The polarization rotator was characterized by studying the influence of the applied electric field on the twist angle and the variation of intensity in the zero and the first orders of diffraction.

Quarter-Wave Metal Plate Solar Antenna, S. Shynu, Max Ammann, Brian Norton

Articles

A novel design of a quarter-wave shorted trapezoidal metal plate solar antenna using high efficiency polycrystalline silicon solar cells is presented. Using the DC conductive parts of the cell as RF antenna elements as well as choosing the radiating element to be a small base trapezoid, better coupling between the feed and shorting plates is ensured and 40.3% size reduction compared to a conventional shorted quarter-wave patch is obtained. The trapezoidal radiating element covers merely 2.7% of the total available illumination area of the solar cell, leaving its efficiency essentially unaffected. The proposed design strategy has been verified by an …

Digital Radio Policy In Canada: From Analog Replacement To Multimedia Convergence, Brian O'Neill

Articles

Digital radio policy in Canada has moved from a position of seeking to migrate all radio broadcasting onto a single digital transmission system (Eureka-147) to a multi-platform, cross-media and multimedia approach. The most recent digital radio policy of 2006 suggests a range of new possibilities for radio broadcasting, including multimedia broadcasting, but as a result has compromised the early adoption of the Eureka-147 standard. This paper contrasts the different policy contexts of 1995 and 2006 and argues that the competing technological options for digital audio delivery now pose significant dilemmas for broadcasters and policy makers.

Beyond Economics: A Behavioural Approach To Energy Efficiency In Domestic Buildings, Marius Claudy, Aidan O'Driscoll

Articles

This paper argues that the moderate success of policies aiming to stimulate the uptake of Sustainable Energy Systems (SES) in the domestic sector is grounded in a poor understanding of the ‘consumer’. The predominant economic approach behind most policies assumes that improving the cost-benefit ratio of technologies via grants and subsidies and providing sufficient information will automatically incentivise householders’ to invest into SES. Yet, policymakers often neglect behavioural determinants such as attitudes, social norms or personal capabilities. Drawing on key findings from the economics, technology and behavioural literature, this paper proposes an integrated model to identify behavioural and contextual influences …

Liberal Mccartyism And The Origins Of Critical Race Theory Critical Race Theory Speaker Series - Crt 20: Honoring Our Past, Charting Our Future, Richard Delgado

Articles

No abstract provided.