Digital Commons Network^™

An Experimental System For Observation Of The Rat Coronary Microcirculation Using Digital Image Processing, Wolfgang Braun

Theses

A system was constructed which allows direct observation of the coronary microcirculation of the beating rat heart. An EKG triggered strobe is used on the microscope light source to "stop" the action of the beating heart so the surface microvessels can be observed di rectly under the microscope. Experimental results are recorded on videotape and played back for frame-by-frame analysis of the data using digital Image processing techniques such as digital filtering, image extraction, image enhancement and edge detection.

The application of image enhancement techniques (high order and low order enhancement methods ) as well as edge detection using a …

The Quantitative Determination Of The Elemental Composition Of Coal Fly Ash Samples Using X-Ray Fluorescence, Joseph R. Cervassi

Theses

Bulk constituent elements contained in coal fly ash were measured by X-ray fluorescence spectroscopy in eight samples. Four samples were used as calibration standards for the spectrometer since their compositions were previously determined by atomic absorption spectrometry. Calibration coefficients of the standards were calculated with computer assisted regression analysis of the fluorescence spectra, and used to determine the composition of the remaining four samples. The compositions of the latter four samples, as predicted by X-ray fluorescence, were then compared to atomic absorption results. X-ray fluorescence and atomic absorption results agree best when the concentrations of elements in the standards are …

Accuracy And Convergence Of Finite Element Approximations, Gwo-Tar Chang

Theses

In the design of structure, the engineer seeks to determine the distribution of stresses throughout the structure or the displacements at certain points of the structure. The finite element method is a numerical analysis technique for obtaining approximate solutions to engineering problems that are not amenable to closed form solutions.

In this work the triangular element and the rectangular element in plane stress are employed in the development of the formulation of element stiffness equations. The effect of the number of elements on the convergence to the analytical solution was investigated. Similar study using rectangular elements was also carried out …

Preparation Of Aniline-Formaldehyde Ion-Exchanger Fiber : Part I : Polymer Synthesis And Fiber Curing, Ching-Hsin Chen

Theses

Aniline-Formaldehyde polymer was synthesized by a new procedure ( as opposed to the conventional approach ). With an equal molar ratio of aniline and formaldehyde and a small amount of oxalic acid, the resulted polymer is free from gels and is suitable for fiber transformation.

The polymer is a transparent yellowish resin, having a melting range between 100-115C, and an average molecular weight 1200. The polymer was intended to be the precursor material for ion-exchange fibers. However, due to the time limit, this thesis only covers the work of polymer synthesis, fiber spinning and the identification of an crosslinker.

Among …

Industrial Parameters For Applying New Technology, Michael Cimino

Theses

Industrial Parameters for Applying New Technology is a paper devoted to the study of the role 'of' robots in today's manufacturing environment. Industry looks forward to robotic technology to solve, its declining productivity dilemma. The purpose of this paper is to' aid a Prospective robot buyer in selecting the appropriate application and in particular a suitable robot for that application. A listing of robot performance characteristics, criteria chart, and evaluation table were developed to guide the engineer through the necessary steps required in selecting a successful robot application.

The history of robotics is discussed briefly along with an explanation of …

Design Criteria For Employee Alcholism Programs, Lee G. Conover

Theses

This thesis is an examination and evaluation of treating employee alcohol-related problems through a counseling program. Special attention has been given to the many aspects that must be considered for the implementation of a successful counseling program.

To gather the data for this thesis, a successful counseling program was observed and members of its counseling program staff, medical, labor relations, and personnel departments, along with its union representatives, were interviewed in order to draw on their experience and expertise in organizing, implementing and maintaining such a counseling program. A counseling program consultant, a representative of the New Jersey Department of …

Selection And Problems Faced By The Handicapped In An Industry, Hemank Babulal Dharia

Theses

This thesis reports on the problems faced by handicapped workers placed in an industrial situation. It discusses some of the frustrations, aspirations and hopes of the disabled to find suitable work as well as the fears and misconceptions of employers who consider the employment of the handicapped.

There is discussed the work done by the author in designing jigs and fixtures to assist handicapped workers in production as well as the models of placement, job understanding and rehabilitation efforts.

The work was done at the Delaware County Branch of the Pennsylvania Association for the Blind, Chester, Pennsylvania where the author …

Managing And Controlling The Manufacturing Operations, Harish Doshi

Theses

No abstract provided.

Management Of The Interface Between Product Design And Production, Adam Fischer

Theses

The goal of this thesis was to identify some of the many obstacles which tend to, in some way or manner, delay the timely, satisfactory progression of new developments from becoming new profit items. These obstacles which are numerous are the results of personal observation plus research of many books and periodicals. The identification of the obstacles will hopefully result in their obviation. Notable accomplishments along these lines tend to:

1. Reduce the loss of opportunity to gain an appreciable market share.

2. Reduce investment/overhead cost by earlier recovery of cost through earlier marketing effort.

3. Reduce continuing engineering costs …

A Finite Difference Solution Of An Ideal, Normal, Impinging Jet, Luis A. Gast

Theses

The free boundary of a circular jet of an irrotational, inviscid, incompressible, fluid impinging normally to a flat surface from a height of 2 times the nozzle radius, was found by a finite difference method.

Starting with a graphical solution, approximate values of the potential were given to the nodes at the field.

Having the equipotential lines perpendicular to the axis of the jet, perpendicular to the impinging surface, and having defined the value of the potential at both the entrance and exit of the jet, a finite difference expression of the Laplace's equation was used in an iteration scheme …

A Study Of Personal Conflict And Stress Among Engineering Personnel As Influenced By Corporate Policy, Stated And Unstated, Richard Brian Gordon

Theses

The following concepts are being challenged: That organizations are efficient, well-managed, and intelligent: that if one is to believe in any sort of authority, one must first accept the notion that it truly knows best and that it is not only competent, but well-intentioned; that organizations exist for the benefit of their employees and customers; that organizations reward dedication, competence, and performance: that if the organization is to grow it needs loyal sacrificing people; that organizations are dynamic and receptive to change; that if the employee is discouraged, do not worry, for tomorrow will be better; that to be useful …

Prediction Of Enthalpies Of Mixing With A Generalized Unifac Model, Steven Otto Hetzel

Theses

The UNIFAC model of Skjold-Jorgensen et al (1980), which incorporates a general temperature dependence for the coordination number is used in the correlation and prediction of heats of mixing for binary liquid mixtures. Correlation and prediction of n-alkanes and cyclic-alkanes with alkenes, ketones, aldehydes, esters, ethers, acids, nitriles, nitroalkanes, and aikynes have been performed in a temperature range of 0 to 100°C. Typical prediction and correlation errors of 5 to 20% are obtained using this model.

Shear Behavior Of Fibrous Reinforced Concrete Short Columns, Feraidoon K. Kashani

Theses

The objective of this investigation was to examine the shear behavior of axially loaded fibrous reinforced concrete short columns under double curvature bending. Eleven columns with modeled dimensions of 6 in. by 41/2 in. with only different fiber volume fraction V_f and shear span ratios were tested under double curvature bending.

The material properties of fibrous concrete is briefly discussed on how the addition of fibers benefits the concrete mix. The results of the compressive and tensile behavior of fibrous concrete is presented. The behavior of bending on reinforced fibrous concrete columns is also briefly discussed.

Previous investigation results, …

An Analysis For The Blade Coating Of Ctbn Modified Epoxy Adhesive, Jeng-Li Liang

Theses

A resin metering criterion has been developed for processing the prepregs of CTBN-EPOXY resin in which the resin content can be controlled within close tolerances. This criterion was obtained by numerically simulating the flow of CTBN-EPDXY resin in the blade-type metering device at room temperature. The Newtonion case of CTBN-EPOXY resin was selected for the study to avoid dealing with more complicated flow equations. A methodology of using the penalty function/finite element formulation was developed to solve the steady state Navior-Stokes equation.

The rheological data show that the CTBN-EPOXY resin is a non-Newtonion fluid at low shear rate. On the …

An Application Of Personal Microcomputer To Solve Mid-Sized Goal Programming Problems, Chanhon Joe Lu

Theses

This thesis develops a microcomputer software to solve mid-sized goal programming problems utilizing the revised simplex method.

Goal programming is an extension of linear programming, but is more powerful and flexible than linear programming because of its capability in handling problems with multiple conflicting objectives, instead of dealing with "one dimensional" objective - profit maximization or cost minimization. Accordingly, goal programming is very useful to the complex organizational environments.

With the help of rapid and accurate computation of digital computers, solving a complex program is not a difficult task at all. However, some medium-sized companies cannot afford a mainframe -computer, …

A Parameter Identification System For The Human Visual Evoked Response, Robert Kalle Michaels

Theses

The Human Visual Evoked Response (VER) provides a useful tool for analyzing an individual's visual system. However, mere inspection of the signal may not always be the best way to make a diagnosis of the patient. To aid in this diagnosis a parameter identification system has been developed which fits the response to an analog model. The development of the model was based on the results of a survey of previous work in the field. Data were acquired from a data acquisition/processing system developed at the New Jersey University of Medicine and Dentistry and the Eye Institute of New Jersey. …

Organizing To Manage Future Information Technologies, John Patrick Paczkowski

Theses

The area of information technology has undergone dramatic changes over the past ten years, and the rate of change is expected to continue to accelerate through the 1980's and beyond. The newly developing information systems are providing organizations with numerous options for enhancing the quality of managerial decision making, speeding communications and improving the efficiency and effectiveness of administrative/office processes. Unfortnately, many organizations are discovering that they are unable to effectively assimilate and utilize the technology effectively. Chief executives are finding that the traditional structures for managing Data Processing, Telecommunications, and office systems are often fragmented, lack the technical expertise …

Designing A Data Management System To Support A Quality Control Mission, Erastus Runji Muchioki

Theses

This thesis is concerned with the design of a Data Management System to support a Quality Control Mission particularly within the writer's organization. It defines the term quality, with respect to his company's needs, followed by an outline of quality control management's responsibilities. Problems of quality Control from product design, assembly to the finished product are discussed. The organization's current quality control procedures are analyzed. Problems in establishing the data base are discussed. This data is then organized to form the new Data Management System that will support a Quality Control Mission properly. In the discussion, the author tries to …

Managing In The Technical Sales Arena, Robert Munro

Theses

The major objective of this thesis is to portray the role of a Field Engineer for a major manufacturer of electrical distribution and control equipment. In so doing, it should represent a reasonable facsimile of what a sales manager of a large Field Office, comprised of approximately twelve Field Engineers, would encounter in his supervisory capacity. As such, it should provide information for those interested in entering and hoping to manage in technical sales career.

While much of the information was derived from books, periodicals, and conversations with people associated with the electrical industry, the major portion of the work …

Automated Instrumentation System For Studies Of Metabolic Rates In Rats, Suhas P. Pathak

Theses

The task of the instrumentation system is to measure the respiratory exchange in rats in a controlled experiment. Air is drawn at a predeter-mined rate in and out of rat chambers. The proportion of oxygen and carbon dioxide in the ensuing air indicates the respiratory rate of the rat. The entire operation is controlled by a microcomputer whose most important functions are: to direct the flow of air through the rat chambers by switching valves; and to collect data about the percentages of gases in question.

Thus with the help of a computer it is possible to monitor and control …

Criteria Measurement In Edp Auditing, Eugene Alexander Ottaviano

Theses

Criteria Measurement in EDP Auditing is a planning technique to assist the Internal Audit function in systematically selecting software applications for budgeted audit reviews. The objective is to develop a risk analysis method, which is not time and labor intensive, that will minimize risk to the corporation and maximize audit effectiveness. The methodology does not consider probabilities or occurrence rates because risks to the EDP environment are extremely difficult to forecast with traditional techniques. The method provides for both objective and subjective risk determinations.

The approach is to measure software risk criteria for a specific data processing environment. Risk concerns …

The Hydroxide-, Chymotrypsin-, And Blood-Catalyzed Hydrolysis Of A Series Of Sodium 4-Acyloxy-3-Nitrobenzene Sulfonates, Louis E. Rinaldi

Theses

The kinetics of the hydrolysis of a series of water-soluble aromatic esters (sodium 4-acyloxy-3-nitrobenzene sulfonates) were analyzed in order to determine the effect of a variety of substitutions (on the α-carbon of the acid group) upon the rate of reaction.

The following was observed. That (a), the hydroxide catalyzed and water dependent hydrolyses of these esters are slower for larger substituents and faster for smaller ones. That (b), the chymotrypsin catalytic hydrolysis of these esters shows an acylation reaction step which occurs at a rate greater than deacylation for larger substituents, and at approximately equal rates for smaller ones. Furthermore, …

Kinetics And Reactivity Of The 2,4-Tolyene Diiscoyanate With 2-Hydroxyethyl Methacrylate Reaction, Menq-Fong Shieh

Theses

The kinetics of the addition of 2-hydroxyethyl methacrylate(HEMA) to 2,4-Tolyene diisocyanate(2,4-TDI) were studied at the temperature of 25°C, 30°C and 38°C. Reactant and product concentrations were monitored by liquid chromatography.

The rate equations for the series-parallel second order reaction have been developed and integrated by the Runge Kutta-Gill method. The results show that the para

group is about 12 times more reactive than that of the corresponding ortho group with the HEMA hydroxyl group at 25°C, and small amount of HEMA diadduct invariably produced.

Broadband Base Isolated Asymetrically Fed Vhf Antenna, Peter Edward Cunningham

Dissertations

Antennas presently being used for vehicular military VHF communications are narrowband. New generation frequency hopping radios, however, require broadband antennas. The antenna must be base isolated in order to reduce undesirable pattern nulls and impedance variations caused by currents induced on the support structure. Physical constraints limit the antenna length to three meters while operating from a frequency of 30 MHz to 88 MHz.

To satisfy the above requirements a model of a broadband, base isolated, cylindrical antenna less than three meters long was analyzed and built. Equations for the current distribution as a function of the physical parameters were …

Moment Method Solution Of The Time-Dependent Transport Equation To Describe The Scattering Of Gaussian Plane Wave Pulses By A Forest, Nack Yang Cho

Theses

The time dependent transport equation is used to study the transmission of periodic pulses through a forest. The forest is assumed to occupy a half-space region, to be statistically homogeneous and to scatter energy isotropically A periodic sequence of Gaussian plane wave pulses is assumed to enter the forest normally from free space. The transport equation is solved by the moment method using triangular expansion functions. Numerical results indicate the dependence of the incoherent intensity on penetration depth, observation angle, albedo and pulse repetition rate.

Steady State Heat Transfer From Two Concentric Rings Of Spheres, Kevin J. Fitzpatrick

Theses

The method of reflections was used to solve the steady state heat transfer problem for two concentric rings of spheres, all at equal surface temperature. The method results in a mathematical model for the three dimensional temperature profiles around the array of spheres. This model is used to develop an expression for heat transfer rate from the array. This work has resulted in a solution for dilute systems since no ring to ring interaction term was found.

On The Analysis And Design Of Clamped Rectangular Plate With Partial Load, Yacin Saaid Jaboury

Theses

In this Thesis, maximum deflection and bending moments of a partially loaded clamped rectangular plate are studied. The loading is uniformly applied to a retangular area proportional to the shape.

Navier's Solutions on partially loaded simply supported rectangular plate is superimposed with edge moments to give the clamped boundry condition.

Solutions of maximum deflection and bending moments are derived in Double Series form. A Fortran program is employed in obtaining the numerical results. When the partially loaded area approaches zero it becomes a centrally loaded case; and when loading area to plate area ratio approaches unity it becomes a uniformly …

Bending Vibrations Of A Cantilever Beam On An Eccentric Rotating Disc, Yousry S. Aboelnaga

Theses

The differential equation of motion for the C.G. line of a vibrating cantilever beam which is mounted on an eccentric rotating disc is derived. Exact solutions in terms of hypergeometric functions of this fourth order differential equation with variable coefficients are obtained by making several mild assumptions. These solutions include a large class of vibrational modes.

The primary idea leading to the exact solutions is the factorization of the fourth order differential operator into a pair of commuting second order operators.

Numerical Solution Of Navier-Stokes Equation By Finite Element Method, Kuan-Tzong Lee

Theses

A finite element method for solving the entrance flow in a parallel-plate channal at low Reynolds number has been studied. Two methods of formulation for both incompressible viscous and inviscid fluid flows were developed. The first uses stream function and potential function as field variables while the second uses velocity and pressure. Both formulations presented here ultilized variational principle and weighted residual method. The numerical example was solved by constrained variational principle with penalty functions in conjunction with the Newton-Raphson method. A 9-node quadratic quadrilateral element was used in this example. Numerical results for entrance flow problem were obtained for …

Behavior Of Reinforced Fibrous Beam-Column Joints Under Cyclic Loads, Sitaram Mahadev

Theses

From exploratory research of reinforced fibrous concrete, it has been shown that fibrous concrete is potentially superior and less costly than the conventional reinforced concrete.

The testing program consisted of ten beam-column joints with half of these joints containing 1-1/2 percent hooked end fibers. The beam column joints were constructed with less hoops than a conventional seismic joint would have, according to design specifications of the American Concrete Institute Code (ACI 318-77). In studying the behavior of these beam-column joints, two loading cases were examined:

(1) critical regions whose inelastic behavior was controlled by bending, and

(2) critical regions whose …