Digital Commons Network^™

Digitally Implemented Klapper-Kratt Fm Detector Using The Intel-292o Digital Signal Processor, Chang-Hwan Park

Theses

This thesis describes and analyses a digitally implemented FM detector, which is a new member of the family of FM detectors introduced by Drs. Klapper and Kratt.

The properties of the new detector are low delay, excellent sensitivity, extreme linearity, and compatibility of components with integrated circuit technology.

A working model is implemented by adapting FIR digital s signal processing methods, and is realized using the Single-Chip Digital Signal Processor Intel-2920 which is comprised of micro-processor, scratch-pad data RAMs, program store EPROMs, A/D and D/A conversion circuitry, and I/O circuitry.

The performance of the working model shows very good linearity …

Cross-Cultural Study Of Maslow's Need Theory Of Motivation, Jitendra N. Mishra

Theses

Abraham H. Maslow's Need Theory of Motivation was subjected to a cross-cultural scrutiny to see if his theory has universal application. It was thus also intended, to make a contribution to his theory since today, global interdependence is no longer a matter of belief, preference or choice. Rather, it is an inescapable reality.

To achieve this goal, an extensive Literature Survey was undertaken. It was found that his theory is more consistent with American value system. Nevertheless, if care is exercised, his theory can be useful in International context too, with some necessary modifications.

This paper is directed to save …

Automated Eeg Spectrum Analysis System, Marinela C. Laguna

Theses

A computer system has been designed to acquire EEG data from monkeys and to perform the spectral and statistical analysis. The system is capable of processing two channels simultaneously, acquire 64 Kbytes of EEG data for each channel on floppy disk, do the spectrums and averages of the spectrums, and calculate the histogram amplitudes of 13 frequency bands in a range of 0-71.1 Hz.

The software gives the user a lot of choices with respect to data acquisition and processing. The relative spectral power differences between "no-drug" and "drug" experiments give information about the drug effects on the central nervous …

The Quantitative Analysis Of Airborne Particulates By X-Ray Flourescence, George C. Asteriou

Theses

Airborne particulate matter from the New Jersey State area collected on Quartz Microfiber filters was analyzed by X-Ray Fluorescence spectroscopy. The quantitative analysis of the samples against N. B. S. standards produced results which were compared with Atomic Absorption analysis

The results from the two methods were correlated by the introduction of empirical factors for each element.

However, a larger number of analyzed standards of varied composition, along with the creation of a spectral library, can minimize the need for empirical factors and yield accu¬rate results.

The Catabolism Of Arginine By Lactobacillus Brevis In A Chemostat, Jeanette Carque

Theses

A total of thirty chemostat runs were evaluated for steady state biomass concentration of L. brevis and arginine deiminase activity at dilution rates ranging from 0.022 to 0.1.07 h^-1 for a substrate feed consisting of 1.0% glucose and 0.5% arginine (w/v). Biomass concentration and enzyme activity responses were also evaluated for variations in glucose concentration from 0.05% to 1.5% and variations in arginine concentrations from 0.25% to 1.0% at a constant dilution rate (0.06 h^-1).

The system exhibited multiple steady states for the range of dilution rates from 0.022 to 0.107 h^-1. A steady state …

Transport Phenomena Of Copper Ions Through An Electromembrane, Ren-Fu Cheng

Theses

A separation process based on a new class of membrane ( the electromembrane ) was studied. Experiments were performed using three types of electromembrane to remove copper ions from aqueous solution. A Separation Cell Unit was designed and set up to investigate the transport of copper ions through the electromembranes under the influence of both an electric field and a concentration gradient. Fluxes achieved were much greater than those reported for other membrane processes, and the energy consumption was one half that of electrolytic deposition.

Computer Simulation Of A Batch Distillation Column With A Reflux Divider, Michael Gerard Clarke

Theses

The operation of a batch distillation column with a reflux divider has been mathematically simulated to reproduce operational equipment.

The operation of the column consists of one or more product recoveries. During each product recovery period the column alternates between total reflux and total product withdrawal, with the product withdrawal period being 2 — 5 seconds. Between product recoveries the column operating conditions can be reset.

The basic assumption of this batch distillation simulation is that the column completely equilibrates during the period of total reflux. The determination of the total reflux condition is obtained computationally using the iterative Newton—Raphson …

Scheduling Effects Of 5-(3,3-Dimethyl-1-Triazeno)Imidazole-4-Carboxamide (Dtic) And 1,3-Bis-Chloroethyl-1-Nitrosourea (Bcnu) On Mouse Melanoma Cells B16cl5, Gracie V. Coffey

Theses

DTIC and BCNU have been demonstrated to have enhanced chemotherapeutic effects in mice bearing Bl6 mouse melanoma cells. The order of administration seems to be important in maintaining optimum effects. This was shown is a study by Hill et al. (unpublished).

In the present study, mouse melanoma cells, Bl6CL4, were treated with either DTIC or BCNU. The drug was allowed to remain on the cells for 2, 3, or 4 days. The drug-containing media were then removed, the cells were washed and fresh medium was added. The cells were incubated in an atmosphere of 5% CO2 and 95% air at …

Reaction Of Atomic Hydrogen With Chloroform In A Discharge Flow Reactor, Wan-Kuen Jo

Theses

The reactions of atomic hydrogen with chloroform were studied in a tubular flow reactor both in a 4 cm i.d. and 2.6 i.d. discharge flow reactor at pressure of 2.22 to 2.82 mmHg and room temperature using GC and GC/MS for analysis of the reaction. The hydrogen atom concentration at the reaction flame was measured by Chemiluminescence titration with nitrogen dioxide. The hydrogen concentrations are in the 2.48 x 10⁺¹⁴ to 4.83 x 10⁺¹⁴ atoms/cc range at six different hydrogen flow rates. Evidence was found for the formation of atomic carbon intermediate in the reaction, but methane was …

The Kinetics And Hepatotoxicity Of Benzyl Chloride Vapor In Rats, Hari V. Rao

Theses

Male Sprague Dawley rats (250g) were exposed to benzyl chloride vapor at a concentration of 220 ppm for 6 hours. During inhalation, the blood benzyl chloride concentration increased to reach a steady state level of 9-10 ug/ml between 4 and 6 hours of exposure. A small concentration of benzyl chloride (0.86 ug/ml) was present in the blood four hours after the termination of exposure. The absorption half life was 0.53 hours (0.39-0.81) and the elimination half life was l.12 hour (0.93-l.40).

The absorbed benzyl chloride was largely retained in the blood and some of it (0.22 ug/g) was sequestered into …

Preparation And Properties Of Novel Dental Adhesives Based Upon Pentaerythritol, Yuan-Yuan Su

Theses

Urethane methacrylates were synthesized from Pentaerythritol, TDI, HEMA and four phenolic blocking agents or from hydroxypropyl methacrylatel TDI and two phenolic blocking agents. All the products were characterized by melting pointy infrared spectroscopy, NMR spectra, and elemental analysis. The bonding of these materials to dentin slices was also investigated. Such materials are supposed to not only react with the organic constituent of dentin but also polymerized with restorative resin. It was found that bond strength was enhanced by the use of the urethane methacrylates, resulting in best mean bonding strengths of 2400 psi.

Preparation And Testing Of Blocked Isocyanate Dental Adhesives, George W. Sweitzer

Theses

Three monomers were used in this study. Two were prepared from 2,4-toluene diisocyanate (TDI),2 hydroxyethyl methacrylate (HEMA), and either o-methoxyphenol, or o-chlorophenol. The third monomer was prepared from pentaerythritol, TDI, HEMA, and p-cresol.

These monomers were bonded to dentin slices, and then combined with an adhesive copolymer consisting of methyl methacrylate and poly(methyl methacrylate). This mixture was polymerized at room temperature by addition of N,N-dimethyl-p-toluidine, and benzoyl peroxide. This adhesive copolymer was applied to monomer coated slices of dentin, and to aluminum coupons already fixed in a jig. The monomer-coated dentin slices (treated with the adhesive copolymer) were then placed …

Protective Laboratory Measures For The Flexible Wall Permeameter And The Atterberg Limits Tests Using Hazardous And Toxic Chemicals, Robert A. Tetla

Theses

Safety procedures for performing geotechnical testing with hazardous and toxic materials, excluding radioactive wastes, are developed for the Flexible Wall Permeameter and the Atterberg Limits Tests. The tests were evaluated in detail to determine the critical points at which the technician would be exposed to the hazardous and/or toxic permeant. It was found that the following safety measures should always be taken; 1) the apparatus and all testing should be undertaken in a sliding sash hood using the proper face velocity, 2) air monitoring using a personal dosimeter and/or a detector tube is required to assure that the concentration of …

Improving The Capabilities Of The Chemical Engineering Simulation System (Chess) Computer Program, Thomas Zvolensky

Theses

Chemical process simulation programs have become an indispensable tool to chemical engineers in the preparation of heat and material balances, and energy conservation studies. Since the 1960's several dozen process simulators have been developed which are in use today within companies and through computer service bureaus. Due to advances in the areas of unit operation analysis and thermodynamic relations, these programs require periodic modification. This thesis describes the programming modifications made to the Chemical Engineering Simulation System (CHESS) version 2.0, computer program. This undertaking was considered warranted since no improvements have been made to CHESS since its release in 1971. …

An Examination Of The Power Spectral Density Function, James Edward Coleman

Theses

The power spectral density (PSD) function is a characterization of an (ideal) signal or set of signals. It is usually associated with a stationary random process, but it need not be. In fact, to study its properties it is desirable to divorce the power PSD from any extraneous structure that may conceal its properties. Specifically, it is desirable to study Sτ(f) = | Xτ(f)|²/2T and determine how it approximates the power spectrum of a power signal S (f) = τ[R(τ)].

It is shown that it cannot be concluded (contrary to what some of the literature has reported) that …

Automated Arrhythmia Detection In The Exercise Electrocardiogram, Gregory Ciurpita

Theses

A self-adapting, non-real time method for detecting arrhythmias in single channel Exercise ECG is described. Linear and non-linear digital filtering techniques are used to remove additive noise. A time-varying threshold technique is used to detect R-waves based on amplitude. Feature extraction and matched filter methods are used to classify QRS-waves into existing types, or to create new types. The program works on digitized data from floppy disk and plots all data along with classification results on ReGis graphics terminal or printer. This work will continue so that the system will be capable of processing three-channel ECG in real-time.

Buckling Of Some Grooved Columns, Clovis Georges Baaklini

Theses

Columns with two types of transverse grooves are analyzed: a one-sided groove whose bottom is parallel to a vertical plane and cross-section is constant, and a concentric uniform groove. Then, for illustration and to be more specific, round columns are selected such that the cross-section becomes partially circular, for one-sided grooves and totally circular for a concentric groove. The columns are simply supported at both ends and subjected to a compressive eccentric load P at eccentricity e. The static equilibrium of such columns is studied via two types of solutions: the solution to three-segment column and a substantially simpler but …

Analysis And Application Of Automatic Guided Vehicle Systems, Mansuk Bae

Theses

It is the intent of this thesis to analysis the practical applications of Automatic Guided Vehicle Systems (AGVS) as a vital aid in the development of material handling operations within a variety of business sectors.

An evaluation of basis concepts, structural components, practical applications and benefits, and future accessments of AGVS, in terms of material handling are fully discussed. Additionally, a computerized simulation model that calculates "How many Automatic Guided Vehicles Are Needed?" under specific factory conditions and external environmental factors, is both tested and result evaluated.

The author concludes that the use of AGVS as a method for material …

The Evaluation Of New Jersey's Remedial Response Program With Regard To The Use Of Risk Assessment In Determining Extent Of Cleanup, Susan Christine Gieser

Theses

In order to effectively manage the cleanup of hazardous waste sites the New Jersey Department of Environmental Protection developed a comprehensive Master Plan. Under P. L. 1983, c. 222 (A-1255) the Hazardous Waste Advisory Council was charged with reviewing New Jersey's remedial action program. One issue identified by the Council for review was the use of risk assessment for determining extent of cleanup. The study was comprised of a literature search, review of legislation that impacts on this issue, interviews with DEP personnel, and consultation with others from academia and industry to recommend what is an acceptable risk and its …

Behavior Of High Strength Irregular Shaped Reinforced Concrete Columns Under Combined Biaxial Bending And Compression, Gabriel Hannoush

Theses

Other than rectangular and circular shapes, channel and L-shaped reinforced concrete columns are a common design problem for engineers. Since the available design aids and the current code provisions do not provide adequate guidelines for evaluating the ductility and strength of biaxially-loaded reinforced concrete columns, an experimental and analytical investigation and study of the behavior of biaxially-loaded channel and L-shaped short columns was undertaken.

Four one-quarter scale specimens, two specimens for L-shaped and channel shaped columns respectively, were casted, cured and tested till failure.

Moment, curvature and load deflection curves developed from the experiment were compared with the results obtained …

The Accident Prevention Responsibilities Of Management, Kenneth A. Hogue

Theses

The principles of industrial safety described in this paper are discussed from the viewpoint of the industrial supervisor. Maintaining a safe work environment is considered to be a prime responsibility of line supervisors. Accident prevention is viewed as avoidance of unsafe acts and conditions. Guidelines are suggested which enable the the supervisor to impart a safety consciousness on the worker. The Occupational Safety and Health Act and its practical implications are discussed from the standpoint of reporting, correction of unsafe conditions, and penalties. Recommendations are made in the areas of training, communication, and employee motivation.

A Parameter Identification System For The Human Electroretinogram, Yu-Huai Hsiao

Theses

The human Electroretinogram (ERG) is obtained in a clinical test to detect physiological abnormalities in the eye. A mathematical model of the ERG has been developed, as well as a system to identify its parameters. The system utilizes several computers. The data acquisition and initial processing is done on a previously developed system at the Eye Institute of New Jersey and the University of Medicine and Dentistry of New Jersey, which has been modified to provide the facility for further processing. Software was developed to use a MINC-11/23 computer at New Jersey Institute of Technology to transfer data between the …

Skyline Technique For Least Square Temporal Finite Element Method, Ying-Woei Hu

Theses

Skyline technique is known to be one of the most efficient numerical methods for solving symmetric and positive definite simultaneous linear algebraic equations whose coefficient matrix is banded and sparse. This technique considers non-zero elements below the skyline only and manipulates Gaussian elimination process efficiently.

In recent years, the finite element methods applied to discretize the space domain has been successfully extended to time domain discretization. This new technique, temporal finite elements, makes it possible to numerically solve initial value problems in a manner similar to boundary value problems.

This thesis introduces skyline technique to one of the temporal finite …

Standardization, Certification Its Impact On Electronic Systems Manufacturing, Lawrence M. Johmann

Theses

This thesis is a result of an in-depth study of the standardization and certification process in various countries throughout the world. The study was undertaken due to the general lack of readily available information on the subject and problems the author encountered while involved in standardization and certification activities at his previous place of employment.

The thesis discusses product and process standardization and certification and its impact on electronic systems manufacturers. First, the need for standardization and certification is established and its history is reviewed, then the various types and classifications are addressed. Subsequently, standardization in the United States, in …

A Study Of The Human Resources Principles Applied To Telemarketing Programs, Marian Elizabeth Jones

Theses

The objective was to study organizations which have established telemarketing programs to understand the impact of distinct human resources principles used to establish and maintain the sales unit. A questionnaire was developed to determine whether telemarketing programs, which are specifically designed to recruit, select and train inside sales forces, differ from the programs used to do the same with outside sales forces. Furthermore, the sample population was asked whether telemarketing programs contribute to the overall success of the telemarketing force by catering to the special needs of inside sales people. This questionnaire was sent to a sampling of companies who …

Experimental Investigation Of Heat Transfer From An Array Of Air Jets Impinging Normally On A Flat Plate, Deniz Metin Kaya

Theses

Heat transfer from submerged, turbulent, circular and axisymmetric array of air jets impinging normally on a hot flat plate has been studied experimentally. Jets issued from an array of five nozzles 6.35 mm (0.25 in.) in diameter. The ratio of nozzle center-to-center distance to the nozzle diameter, given by C_n/D, of 2, 3 and 4 were considered. Nozzle exit Reynolds Numbers 14000, 26000 and 54000 were employed. The ratio of distance between the test plate and nozzle diameter (Z_n/D) varied from 5 to 15.

Two experimental arrangements, one with a segmented brass plate heated by a …

Optimal Design Of A Dynamic Structural System, Azhar Imtiyaz Khan

Theses

This Thesis studies optimal design of structural dynamics, based on the State Space approach which uses the Design Sensitivity Analysis and the Adjoint Variable Technique. As a numerical example, optimal design of a multistory structure subjected to a dynamic response, similar to that of an earthquake, is chosen. The equations of motion of the structural system are constructed using the Finite Element method, treating the cross-sectional area of each story as a design variable. To solve the equations a package program DE is used. A program is developed based on the State Space Algorithm and the cost function, constraints and …

An Investigation Of Structural Requirements For Computer-Integrated Manufacturing System, Deok-Soo Kim

Theses

This thesis mainly deals with the structural requirements for integration of Computer-Aided Design, Computer-Aided Manufacturing, and Computer-Aided Process Planning functions to achieve ideal Computer-Integrated Manufacturing system. Attempts to define the terminologies and to find the reasons which necessitate these technologies have been made. This work also examines the business issues to justify this concept.

This thesis considers that Computer-Integrated Manufacturing system consists of three major ingredients: Computer-Aided Design, Computer-Aided Manufacturing, and Computer-Aided Process Planning. Flexible Manufacturing System is dealt as an physical shape of Computer-Aided Manufacturing. As the result of integration, the interface rises as a serious problem, and comprehensive …

Evaluation Of Pressure Capacity Of Rectangular Hvac Duct Plates, Ming-Tui Liu

Theses

The purpose of this thesis is to evaluate the pressure capacity of the duct plates for HVAC design as recommended by Sheet MeLal and Air Conditioning Contractors' National Association, Inc, 1980, whose code is based on the theories of both one-dimensional and two-dimensional analysis. Various sizes of duct width and stiffener spacing for rectangular plates are investigated, Charts and plots are Provided to facilitate the HVAC desidn. A BASIC language program and disc for personal computer is also provided.

A Pitch Based Processor For The Analysis Of Steady State Laryngeal Modes, Tzyy-Jenq Lou

Theses

A data acquisition and analysis stem for use in the study of laryngeal dynamics has been built and tested. The special feature of the system is the computer controlled digitizing rate and coordinated subject pitch prompting. Tokens of steady state laryngeal vibration are obtained from an electroglottograph when the subject intones a series of computer prompted pitchs in a musically scalar sequence. The digital samples of this data are captured by the system at a basic rate of 200 samples per laryngeal cycle. This procedure enables the system to perform a modal analysis of laryngeal function, not unlike the analysis …