Digital Commons Network^™

A Computer Aided Manufacturing System For Small Quantity Prototype Board Production, Santiago Garcia-Perez

Theses

A matrix addressed manufacturing tool has been built, tested, and integrated in a system aimed to exploit wire-wrap wiring technology for protoboard production in small quantities. Extensive software exploits the power and economy of the personal computer as a superb manufacturing tool and documentation system. Computer graphics are used as a visual aid that takes advantage of the cognitive capabilities of the human mind and eliminates the boredom and high costs involved with heavy automation achieving instead a tolerable level of human engagement with significantly increased efficiency. The approach presented is new and delivers substantial gains in productivity. The software …

Isoparametric Finite Elements For Axisymmetric Solids, Ramanand R. Shetty

Theses

The finite element formulation of axisymmetric plane stress analysis is used to develop a computer program for numerical implementation. The basic relations used to derive the finite element equations for a solid continum are reviewed in the thesis. The programming organization is summarized and program list is given in Appendix.

The program portion for isoparametric elements are borrowed from Numerical Methods in Finite Element Analysis by K. J. Bathe and E. L. Wilson, and various other subroutines are used from Mr. Huang's thesis on Micropolar elasticity analysis. Mr. Huang's computer program is based on the work done by Dr. Nakamura …

On Radial And Rotational Spring Constants Of Piping With Square Tubing Attachment, Hson-Chih Sun

Theses

Numerical values and analytical expressions for spring constant in the radial direction, and rotational spring constants in the circumferential and longitudinal directions of piping with square structural tubing attachment are presented.

Following Bijlaard's approach, the double Fourier series solution for the thin shell equation are used to express these spring constants as a function of internal pressure, q, and pipe-structural tubing parameters, such as alpha (piping length/radius), beta (tube size/pipe dia.), gamma (pipe radius/thickness) and thickness of the structural tubing. Numerical results of these spring constants are presented in tabulated form. These Tables include a set of eight standard square …

Chebyshev Approximate Solution For Stiff Problems, Kwo-En Hoh

Theses

Chebyshev polynomial and collocation methods are adapted to solve general ordinary differential equations ( initial-value problems and boundary-value problems ). Approximate solutions of initial-value problems are obtained in step-by-step fasion. the solutions have minimax absolute error in the interval and correct values at the end points. The approximate solutions of boundary-value problem will be continuous on the whole domain and have piecewise Chebyshev approximation characteristics in each subinterval of the chosen partition.

Discontinuity Stresses Analysis In Pressure Vessel, Jan-Joo Liu

Theses

In this paper, the ANSYS general purpose finite element computer aided design program was used to perform a series of stress analyses for shells with heads of various shapes.

The analysis included maximum discontinuity stresses, stress contours and displacements induced in axisymmetrical shells subjected to internal pressure loading; especially at the junction of the cylinder and heads of various shapes.

CONICAL SHELL finite elements and TWO-DIMENSIONAL ISOPARAMETRIC finite elements were used in the analysis. The results of the analyses compared very favorably with solutions derived from membrane and bending theory solutions for pressure vessels.

The effect of longitudinal and hoop …

A Study Of Hazardous Wastes Generated In New Jersey With Regard To The Siting Of Waste Disposal Facilities In The State, Shreerang Narayan Dharasker

Theses

The effective treatment and disposal of hazardous wastes is one of the most urgent problems facing the State of New Jersey today. New Jersey is the most densely populated state and is a leader in industry. Nearly every major industry in the nation is represented by one or many production units all of which generate copious amounts of hazardous and toxic wastes each year. Although the state has the toughest rules and regulations on the management of hazardous waste, there are very few options exercised or facilities cited for the effective treatment and disposal of wastes within the state boundaries. …

On Torsional Spring Constants At The Juncture Of Piping-Nozzle, Shean-Juinn Chiou

Theses

Numerical results of torsional spring constants at the juncture of piping-nozzle are studied in this thesis by using the "ANSYS" program and run on VAX computer. These results are presented in tabulated form for a piping-nozzle vessel with constant thickness of 0.375 in. Plot for the torsional spring constants in terms of beta (nozzle radius/pipe radius), gamma (pipe radius/thickness) and alpha (pipe length/radius) are also presented in this thesis. These data are under zero piping internal pressure with beta ranging from 0.1 to 0.8, and gamma ranging from 10 to 150. A numerical example with verification is also given.

Preparation And Kinetic Study Of Immobilized Enzyme Catalyst, Sanjiv S. Kuray

Theses

Degradation of commercially available immobilized Glucose Isomerase enzyme was studied in a batch reactor. Effect of shearing on the degradation was studied by comparing the performance of a basket type reactor ( with enzyme kept inside the stirrer) and ordinary batch reactor ( with enzyme kept outside the stirrer).

Invertase enzyme is available commercially in a free soluble form. It was coupled with a new kind of starch derivative. The coupling efficiency achieved was 8.7 % and the concentration of the immobilized enzyme was 718 U invertase per gram of starch. The deactivation of enzyme-starch gel was studied in a …

Human Factors In The Design Of Computer Application Software, Curtis Springstead

Theses

The use of computers in business has expanded tremendously over the past two decades. This expansion has been possible due to increasing economies within the computer industry, and in spite of the lack of consideration shown for the users of such data processing systems. The popularity of computers has compelled users to expand their list of requirements from a computer system so that it includes ease of use.

This thesis attempts to bring together many widely dispersed studies and principles that can affect the ease of use of interactive computer systems. The material has been organized according to five components …

The Decline Of Unionism With A Legal Analysis Of The Individual Rights Of Union Members, Maria-Isabel Cubides De Gast

Theses

The American labor movement has been losing power and membership for the last few years. Historical development and several facts have affected American unionism in such a manner that nowadays less than 20% of the labor force belongs to unions.

Among the most important causes of such decline discussed herein, are the following: lack of social role of unions, failure to satisfy new workers' needs, political reality under this Administration, high unemployment rate, and lack of union democracy.

Lack of union democracy is believed to be the most damaging factor for unionism's decline. Therefore it is studied in more detail, …

Deconvolution Techniques With Applications In Cardiovascular Systems Analysis, Lakshminarayan Rajaram

Theses

System characterization by means of Impulse and Frequency Response Functions are well known in classical linear systems analysis. Impulse Response Function is a time domain description of a linear system where as the Frequency Response Function represents the frequency domain counterpart. Linear systems are often characterized in frequency domain. In many biological research applications, it becomes necessary to examine the impulse response function in order to understand the behavior of the system under investigation. One such application is the arterial system in cardiovascular dynamics. It has been shown that although both representations are identical, some aspects of the arterial system …

Dispersion In The Laminar Flow Of Ellis Model Fluids Through Straight Tubes, Yeong-Hua Huang

Theses

Taylor-Aris dispersion theory is extended to the laminar tube flow of Carreau model fluids and Ellis model fluids and the results are compared with those of power law fluids. It is found that Carreau and Ellis models are more appropriate than power-law model, especially at low pressure gradient.

An exact solution to the unsteady convective diffusion equation in fully developed laminar flow in tube is obtained by applying the generalized dispersion theory of Gill and Sankarasubramanian for Ellis model. The results are compared with those obtained by Booras and Krantz for power-law model. The most interesting result of this work …

A Closed Form Image Force Function For Deposition Of Particles In A Cylindrical Tube, Hsi-Chung Chiou

Theses

This study investigated the behavior of charged particles suspended in a laminar steady incompressible flow in a cylindrical tube under the influences of image , inertia , viscous and gravitational forces. A new expression for the image force was obtained by introducing an approximate potential energy function. The velocity profiles employed in the analysis were uniform and parabolic.

The governing equations derived were based on Newton's second law of motion and were solved by a Runge-Kutta numerical method. The results were obtained for different values of Q, a dimensionless inertia-charge parameter. For a value of Q equal to zero the …

Sensitivity Analysis Of Linear Goal Programming On Priority Level Reordering, Fu-Chia Hor

Theses

The purpose of this research is to study on the sensitivity analysis of priority level reordering of a goal programming model. Two approaches are presented in this study to handle this priority level reordering analysis. The first one is an algorithm to generate the solution of a similar problem with different priority level ordering of the original one utilizing the final solution tableau of the original problem. In doing so, calculation steps and time are saved tremendously.

The second approach is based on the fact that some goal programming problem of different priority level ordering has the same solution as …

An Analysis Of Minimum Shift Keying From The Viewpoints Of Quadrature Multiplexed And Multi-H Continuous Phase Modulation Signaling, Alfred Anthony De Seta

Theses

Minimum Shift Keying (MSK) is a bandwidth efficient modulation scheme which offers superior performance over Quadrature Phase Shift Keying (QPSK) and Offset Quadrature Phase Shift Keying (OQPSK). This paper discusses these modulation techniques from a quadrature multiplexed signaling viewpoint and compares them in terms of error performance, bandwidth properties and bandlimiting and hardlimiting effects. MSK is also considered as a special case of a multi-h Continuous Phase Modulation (CPM) signal and the Viterbi algorithm is presented as an optimal detection scheme for this class of signals. A computer simulation is performed with the VA as the detection mechanism for an …

Deposition Of Suspensions In Convergent Channels Due To Electrostatic Image Forces, Kwok Wah Hui

Dissertations

The deposition of suspensions for uniform flow in convergent channels under the combined influences of inertia, viscous and electrostatic image forces was studied theorectically. The fluid phase was assumed to be two-dimensional, steady, uniform, incompressible and laminar while the particle phase was assumed to be uniform, steady, dilute and with negligible gravity effects.

Since the image force equations for convergent channels have not been derived, it becomes one of the main purposes of this study to perform the derivation of the image force equations. The lengths of the channels were chosen in a way that the exit area is only …

Reactions Of Chlorocarbon Species With Hydrogen Over Palladium On Alumina Catalyst And Zeolite Catalyst-Development Of Deactivation Models, Yuh-Der Yang

Dissertations

Four catalytic dechlorination reactions were studied experimentally using a fixed-bed reactor at atmosphere pressure. Reaction mechanisms were proposed, and the kinetics modelled.

The first reaction is 1,2-dichloroethane with hydrogen over zeolite catalyst. Catalyst deactivation models were examined.

The second reaction was between 1,2-dichloroethane and hydrogen over palladium catalyst on alumina support. Formation of two intermediates on the catalyst surface is proposed, which then produced ethane, ethylene, and ethyl chloride. Higher conversion to ethane and ethylene was observed at temperatures above 218°C while conversion to chloroethane is higher at temperatures below 218°C. The activation energy was found to be 15 Kcal/gm-mole. …

Deposition Of Particles In Tubes Due To Gravity And Electrostatic Charges, Win-Chung Chen

Dissertations

The deposition of particles in a parallel-plate channel and a circular tube under the influence of inertia, fluid viscosity, gravity and electrostatic image forces was studied by analytical and numerical methods. A laminar flow with uniform and parabolic velocity profiles was investigated with a particle initial velocity of zero as well as that of the local fluid velocity.

The governing equations were solved by the Lagrangian approach to obtain the particle trajectories from which the fraction of deposition was calculated. Closed form solutions for particle trajectory and a complete deposition of particles in a finite length of the flow passage …

Computer Aided Stress Analysis Of Long Bones Utilizing Computed Tomography, Shlomo Asher Marom

Dissertations

A computer aided analysis method, utilizing computed tomography (CT) has been developed, which together with a finite element program determines the stress-displacement pattern in a long bone section. The CT data file provides the geometry, the density and the material properties for the generated finite element model.

A three-dimensional finite element model of a tibial shaft is automatically generated from the CT file by a pre-processing procedure for a finite element program. The developed pre-processor includes an edge detection algorithm which determines the boundaries of the reconstructed cross-sectional images of the scanned bone. A mesh generation procedure then automatically generates …

Two And Three-Dimensional Isoparametric Finite Elements For Axisymmetric Micropolar Elasticity, Fuang-Yuan Huang

Dissertations

Finite element analysis program for isotropic and orthotropic axisymmetric micropolar (Cosserat) elastic solids are developed in this thesis. Isoparametric elements of 8- and 20- node are used to solve general three-dimensional problems, arid both 4- and 8-node elements are used for two-dimensional cases. Three-dimensional finite element formulation for cylindrical coordinate system is derived. Corresponding Fortran programs are then developed. Patch tests are performed for two-dimensional cases to verify the applicability of the finite element method to non-rectangular geometries. Several two-dimensional and three- dimensional problems for micropolar elastic solids are solved to verify the formulations arid computer program.

Good agreements were …

The Interfacing Between The A/D Converter, Buffer Memory And Hx-40 Microcomputer, Yu-Hwa Chu

Theses

The data acquisition system which includes A/D converter, buffer memory, and address generator, is to digitize the signal for the computer use. The special feature of this system is the computer controlled digitizing rate over a range from 35K to 0.

The interfacing between Motorola 68000 E.C.B. to H.P. 64000 Development System is the simple example for data communication. How to make the protocal to be compatible is the main point. H.P. 64000 is treated as a host computer because it has the capability for data management and large memory for storing data.

Design Of Code Division Multiple Access Systems, Nakrendrakumar Patel

Theses

The intent of the work "Design of Code Division Multiple Access systems (CDMA) " is to consider different aspects of design with their effect on system performance. The generation of binary shift register sequences, that is maximal length sequences, with their properties are presented. From these maximal length sequences the Gold codes are obtained which are the most suitable approximately orthogonal codes for designing CDMA systems. These are discussed with their specific crosscorrelation properties. An extensive discussion is given of the difficult problem of synchronization, thatis bothacquisitionandtracking of pseudonoise sequences. Different synchronizing methods are discussed along with their relative performance. …

Saturated Hydraulic Conductivity Of Brunswick Soil With Aqueous Benzene Solution, Thomas R. Pisciotta

Theses

Tests measuring saturated hydraulic conductivity and dispersivity were conducted on Brunswick soil using an aqueous solution of benzene. The tests were performed using a flexible wall permeameter which was modified to allow extraction of effluent samples immediately upon exit of the test specimen. Influent and effluent samples were analyzed with a gas chromatograph in order to quantify dispersion and sorption in the specimen.

The test was performed using a confining pressure of 70 psi. and a hydraulic gradient of 100.3. Using a sample statically compacted to 99.2% of the Modified Proctor maximum density and tap water as a permeant, stable …

Identification Of Material Constants Of Human Bone Using Finite Element Method For Micropolar Elasticity, Sajid Mannan Sayed

Theses

Bone differs from most engineering materials in the composition of its structure. The classical theory of elasticity fails to correctly predict the stress concentration effects in bones with precracked or notched surfaces, and can be applied only to those materials which exhibit more homogeneity and isotropicity than bone. Therefore, generalized continuum theories, which have addditional degrees of freedom, must be used to determine the stress concentration effects in human bone, especially in regions of high strain gradient, such as a hole or an interface.

In this thesis, efforts have been made to identify the material constants of human bone since …

Computerized Work Measurement System, Vrajesh Shah

Theses

This thesis is concerned with the application of computerized work measurement to improve productivity and efficiency of production workers. In doing so, the techniques of MOST (Maynard Operation Sequence Technique) is studied to determine its appropriateness for industrial use. The advantages and disadvantages of the system are studied as to its value to large and small industries.

Development Of Dynamic Analysis Program Mini-Dymac, Shang-Rou Shien

Theses

The computer program DYMAC developed by B. Paul automatically generates and numerically integrates the equations of motion of closed loop multi-body mechanical systems. The theory behind this program is Larange's form of d'Alembert's principle. However, it is not an easy task for the beginners to understand this program completely. If there is a simplified version of the program, it will be of great help for those people to understand the essential organization of the program.

Using the same theory of DYMAC, computer program MINI-DYMAC is developed in this thesis and hoped to serve as an educational version of DYMAC. For …

Investigation Into The Feasibility Of Burning Hazardous Waste In Utility Boilers, Reuben Steinberg

Theses

Disposal of hazardous waste is of major concern in recent years in this country. Declining availability of landfills together with more stringent State and Federal regulations has necessitated the need to consider alternative means of hazardous waste disposal. It was suggested that burning hazardous wastes in presently operating utility boilers might be beneficial to the utilities and offer a solution to this social problem.

This thesis investigates the feasibility of this alternative given the technical, economic and regulatory considerations involved and discusses the findings of adopting this technology for hazardous waste disposal.

Based on the results of this study it …

Digital Signal Processing On Tms32010 Evaluation Module And Analog Interface Board, Jiming Sun

Theses

The TMS32010 Evaluation Module (EVM) and Analog Interface Board (AIB) have been used to implement a digital signal processing system. This new system will be the hardware basis for research and development in the DSP field at NJIT in the future. This thesis will serve as a user's guide and overall technical manual for the system.

TMS32010 Assembler, Linker and Simulator in VAX-11 are used to develop the system software, then we can down load the object codes to the EVM through the MODEM in order to test them. By using the A/D and D/A converter as input and output …

Graphic Display Of Robot Kinematics, Ramamurthy Vishwanathan

Theses

This thesis uses the HOUIE.BYLI graphics software package to simulate the kinematics of a six degree of freedom, MAKER I robot. The coordinate frames for the various links of the robot were established. The kinematic equations for the manipulator were developed snd solved using the techniques of inverse geometric transformations and transformations of objects in 3D space. A program was also developed to calculate the joint variables of the manipulator given any point on, and the orientation of, an object. These variable values are used to direct the robot end effector to the given point. This can be seen in …

Similitude Analysis Of Model Experiments Of Piles Driven To Rock, George Nicou Georghoudes

Theses

This thesis investigates the similitude requirements for the Dynamic Pile Driving Apparatus in the New Jersey Institute of Technology Laboratory. The apparatus is being used to perform model tests to study bearing stratum fracturing caused by driving pile groups to weak rock.

Two approaches were used to establish similitude between the model and actual field conditions. The first approach utilizes dimensional analysis to develop a relationship between the energy delivered to the rock mass by the pile and the unit length. The second approach proposes a procedure to establish an empirical relationship between the threshold energy to fracture the rock …