Digital Commons Network^™

Assessment Of Autonomic Regulation Of Heart Rate Variability, Shaw-Jyh Shin

Dissertations

Complex demodulation, accompanied by the techniques of interpolation, detrending and zero-phase-shift lowpass filtering were used to examine the effect of both divisions of the autonomic nervous system (sympathetic and parasympathetic) on heart rate by analyzing the heart rate variability signal from dogs under two different classical conditionings: CS+ and CS-, which cause different dynamic pattern changes in the autonomic nervous system to regulate the heart rate.

Unlike power spectral analysis, complex demodulation gives results in the time domain and shows the variation of amplitude and phase over time at a given frequency. The variation of phase indicates the frequency deviation …

Multiyear Drought Simulation With Periodic-Stochastic Hydrologic Processes, Lankeswara Hemal Wijayaratne

Dissertations

Previous studies on multiyear droughts are often limited to the analysis of historic annual flow series. A major problem in these studies is the unavailability of long historic flow records, on which to perform the analysis. To overcome this difficulty, the present study has used synthetically generated mean annual flow series to suppliment the historic flows. For the purpose of generating flows, a general methodology was developed to propose a mathematical model based on the harmonic and stochastic analyses of the historic flow series. The main objective was to derive a large population of multiyear drought events from the generated …

Sorption And Desorption Of Organic Compounds By Flyash, Kashinath Banerjee

Dissertations

A sorbent treatment process has been developed which uses flyash as sorbent in the treatment of highly toxic and hazardous chemicals; these include: Alcohols, Aldehydes, Ketones and Aromatics. Batch, as well as dynamic, studies were performed, in different phases, during the investigation. Single and multiple solute systems were examined separately. The samples were analyzed using a Flame Ionization Detector Gas Chromatograph.

The result of this study demonstrates that isolation/ immobilization of the organic pollutants is technologically feasible by adsorbing the contaminants onto flyash. The residual carbon content of the flyash plays a very significant role during the treatment process. The …

Nucleus 1988, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the Newark College of Engineering Nucleus.

The Design, Manufacture And Mechanical Analysis Of An L4-5 Spinal Disc Prosthesis, Bohdan A. Siryi

Theses

The purpose of this research was to develop an intervertebral disc prosthesis which can provide the biomechanical properties of the natural disc. The prosthesis will be used to replace the symptomatic degenerated disc and thereby limit backpain and subsequent spinal disease.

Four cadaveric L4-5 motion segments were mechanically tested under axial compression and combined compression/torsion, generating compressive moduli and torsional stiffness values. Following, prosthetic discs were fabricated and mechanically tested, with the fabrication technique directed towards the optimization of mechanical properties in compression, torsion and bending.

Thirty silicon rubber and forty five polyurethane disc prostheses were fabricated. Silicon rubber, dacron …

Investigation Of High Shear-Rate Viscoelastic Flow, Sudarshan S. Sood

Theses

The object of this study is to understand two important characteristics exhibited by viscoelastic fluids at high shear-rates, and analyse their influence on practical applications Viscoelastic fluids, such as polymer solutions, when subjected to high shear stress, behave in a manner which has not been sufficiently analytically explained In experimental studies, such fluids have shown.

(a) Stress relaxation.

(b) Decrease of viscosity with an increase in shear rate.

(c) Slight decrease of viscosity with temperature.

(d) Normal stress differences in shear flow.

In this thesis an analytical explanation is given for two (a and b ) of these features This …

Friedman's Model Of Calculating The Optimum Bid Price Using Dbase Iii Plus, Selim Uzel

Theses

The micro-computer program, BIDCALC presented in this thesis is offered as simple, practical, and proven approach to developing an effective data-based competitive bidding strategy. BIDCALC is written in dBASE III Plus programming language for MS-DOS based computers.

Main purpose of the program is to evaluate the optimum bid using the Friedman's model of Maximizing the Expected Profit. At the same time the program keeps track of necessary competitor and project information in data base files which are easily transferable to other software packages. The program is capable of generating a variety of reports in a matter of seconds.

BIDCALC is …

Cmos Sram Design For Initializing Programmable Logic Devices, Ravi K. Vaidyanathan

Theses

This thesis presents the design of CMOS Static Random Access Memory (SRAM) which is imbedded within a high performance Programmable Logic Device (PLD). The SRAM and its control circuitry are used to initialize (or personalize) the NJIT PLD chip. The design is defined in 3-levels of functional hierarchy consistent with the physical and electronic design automation utilized for this design. The imbedded SRAM supports the PLD application circuit which includes 8 small Array and one large Control Programmable Logic Arrays.

The SRAM is structured as 64 X 138 bit array with serial read and write inputs. It is designed emphasizing …

Automatic Generation Of Robot Paths For Waterjet Cutting From Autocad Drawings, Samir Vij

Theses

The automatic generation of robot paths for a commercial water-jet cutting system by establishing a link with a commercial CAD system, in an attempt to achieve paper-less manufacturing and to minimize human interface is the objective of this thesis.

Water-jet cutting is an emerging technology with unlimited potential for a wide variety of manufacturing applications. Water-jet cutting systems integrated with robotic work cells allow the user to cut a variety of parts through part programs generated for robot controllers. The system employed is an Ingersoll-Rand water-jet cutting system, the movement of which is controlled by an Allen-Bradley 8200R programmable robot …

Analysis Of Spread Spectrum System Using Direct Sequence Technique In Jamming Environment, Kandarp A. Vyas

Theses

A spread spectrum system is a means of transmitting data over a channel In addition it offers a wide variety of features like data security and signal hiding This work studies in detail a spread spectrum system using direct sequence binary phase shift keying. The Sliding Correlator and Sequential Detector techniques have been used to achieve synchronization. A brief study of pseudorandom noise has been presented. System was simulated on UNIX using 'c'. A modified version, suitable for software implementation, of Sliding Correlator and Sequential Detector was, used. Results generated using tins model are presented here.

Attenuation Properties Of An Lp 11 Mode In A W-Type Fiber Operating Below Cutoff, Chih-Chiang Wang

Theses

Rigorous formulation of a W-type fiber for its dispersion properties is presented. An LP mode has been studies extensively with respect to its attenuation properties when the frequency of operation is kept below cut-off. Due to rigorous dispersion equation numerical difficulties encountered in the computations, an approximate dispersion equation corresponding to weakly guided modes is solved. Numerical results corresponding to attenuation and propagation characteristics of the W-type fiber for radii and refractive index variations are presented. A computational subroutine for radial functions (Bessel, etc ) for complex argument has been used and proved to be useful in the legion of …

Research, Development, And Evaluation Of A Solid State Transformer, Robert Michael Joseph Wozniak

Theses

The analysis and design of a solid state step down transformer is presented as part of a research study which reviews novel approaches to the development of high frequency power magnetic apparatuses and applies available theory to produce a solid state counter part. The resulting circuit exhibits the potential for efficiency as high as 85%, low output ripple, regulation that is comparable with other modes of power conversion and the ability to provide localized on-board power.

Schema Based Wiring Tool : A Computer Network And Cad Design System, Jia Jing Zhang

Theses

For the purpose of building a SBC-8052-Basic micro-controller based instrument system, a new SCHEMA II Computer Aided Design system for IBM-PC is used to enhance circuits design routine, and it is described here. The new features of this CAD are discussed, and the design example of a new version of the SBC-8052-Basic micro-controller is given here in detail.

Since the wiring board system is adopted as tool of the laboratory development and controlled by the QL microcomputer, and since SCHEMA II CAD, on the other hand, is used on the IBM-PC-AT, communication between the two microcomputers is accomplished, and the …

On-Line Blood Glucose Control System, Huan Zheng

Theses

A method has been developed that can monitor and control the meal initiation of rats. The goal of studying meal initiation is to find a mechanism of control of the diet, based upon the assumption that the body weight is closely related to feeding behavior. If the feeding behavior can be controlled, then the body weight can be controlled. The experimental system has two major functions: (1) Continuous measurement and recording of the blood glucose concentration and meal pattern of rats. (2) Automatic or manual infusing of glucose or other substances to the rats intravenously.

For blood glucose concentration and …

The State And Future Of Televised Professional Training Systems, Robert Michael Brady

Theses

This paper investigates the topic of televised professional training -- that is training and educating managers and technical professionals via live or videotaped television broadcasts. The investigation begins with a description of how some typical educational networks operate; it then goes on to analyze in a strictly theoretical sense, some of the advantages and disadvantages that such a system would have compared with the traditional methods of offering continuing education; it then discusses the results of two specially prepared surveys -- one addressed to the administrator/manager, and one addressed to the student. These areas are then united in a final …

Comparative Energy Analysis Of An Office Building Using A Microcomputeromparative Energy Analysis Of An Office Building Using A Microcomputer, Dale Krasnoff Bromberg

Theses

An energy analysis was performed on an office building using two different software packages - ASEAM and Trakload. The structure studied was the P.S.E. & G. headquarters in Newark, N.J.. The results of various parametric runs were compared. Then results from one of the programs were compared with results of a study carried out by Tishman Research Corporation and Jaros, Baum & Bolles, consulting engineers.

Although the two software products had variations in input requirements, overall the results of the two programs were similar. The overall deviation for total energy consumption between the two programs was between 3% and 15%. …

C/Ku Band Satellite Television Reception System, Costas A. Economides

Theses

The purpose of this thesis is to examine and investigate the design of a satellite reception system able to receive most C and Ku band North American geostationary satellites' TV transmissions. The performance criterion used for the system design is based on a required demodulated video signal-to-noise ratio maintained for a specified percentage of time in conjunction with overall cost considerations.

Furthermore, a computer program written in FORTRAN 77 is developed, which among other functions lists the notified, operational, geostationary satellites in sight with their corresponding look angles, from any given location on the earth.

Adsorption And Kinetics Of Adsorption By Flyash In Solution, Murthy K. Jogimahanti

Theses

The phenomena of adsorption is extremely important in water/wastewater treatment process. A process which uses flyash as the sorbent for removing organic compounds from aqueous solutions has been investigated. Also, the rate at which this process occurs, i.e., the kinetics of adsorption, has been studied. Single solute systems were examined and the samples were analyzed using a Flame Ionization Detector Gas Chromatograph. The potentialities of adsorption on flyash as a method of renovation of water have not been realized fully, because little knowledge is available regarding the effective application of the method for this purpose.

Flyash has been known to …

A Silicon Photodiode Array For Soft X-Ray Sensing, Chih-Te Hu

Theses

An array of 30 x 30 sensing cells including logic within each cell and a self-scan address circuit are described. A unique scintillation technique is used to increase the threshold sensitivity 60dB for X-ray photon sensing beyond that obtainable with conventional photodiode sensors. Simulations for the sensing cell and some additional logic elements are based on SPICE version 2G5 and HILO 3. Worst case analysis includes variations in threshold voltage V_TP and V_TN for the CMOS circuit components. The final CMOS chip dimension using MOSIS 1.2 micron rules is 10mm x 10mm base on the 80 …

Wastewater Treatment : Phenol Extraction By Liquid Membrane, Jan-Ming Hou

Theses

Two models for the extraction of phenol by means of liquid surfactant membranes is presented in which external mass transfer around w/o emulsion drop, phase and chemical equilibria are taken into account.

The nonlinear coupled P.D.E.'s is solved under assumptions to get a close-formed analytical approximate solution. The experimental results on the batch extraction of phenol are found to be satisfactory simulated by one of the proposed models provided that phenol concentration is higher than 0.01N. The model requires no adjustable parameter thus it can predict the extraction behavior without doing experiments.

Sorptive And Geotechnical Characteristics Of Kaolinite, Chi-Yuan Shih

Theses

The sorption/desorption behavior of phenol and chlorobenzene as well as their influence on geotechnical characteristics of kaolinite were studied. The results reveal that the sorption process follows closely with the Freundlich adsorption isotherm whereas the sorption/desorption ratio depends upon the characteristics of organic compounds.

A series of geotechnical properties tests was also undertaken after achieving equilibrium at different concentrations of organic compounds. It was found that the parameters such as liquid limit, plastic limit, optimum moisture content, and dry density increase with an increasing-concentration of organic compounds.

The relationship between the geotechnical, properties and sorption behavior of soils provides the …

Investigation Of Different Cmos Dram Sense Amplifier Configurations In Vlsi, Bihju Chiu

Theses

Sense amplifiers are particularly difficult circuits to design. In this work, only CMOS sense amplifiers are considered. There are typically two configurations of CMOS sense amplifiers: the cross-connected flip flop configuration and the current-mirror configuration. They are widely used nowadays with various modifications. These improved configurations are simulated and optimized with SPICE package, and their relative performances are also compared in this thesis.

Determination Of Polycyclic Aromatic Hydrocarbons From Incineration Emission Samples, Robert Cebula

Theses

Stack emissions from five sources (one pulverized coal combustion operation, three sewage sludge incineration operations and one gray tin refractory operation) were sampled by use of U.S. EPA Modified Method 5 isokinetic sampling unit for vapor and particulate effluent. The sampling unit provided XAD-2 resin samples, polytetrafluoroethylene and glass fiber filters and impinger washings of dichloromethane. The resins were soxhlet extracted using dichloromethane (DCM) and the filters were soxhlet extracted using DCM followed by acetone. Fractionation of extracts was accomplished by thin layer chromatography. The resulting fractions were analyzed for polycyclic aromatic hydrocarbons (PAH), nitro-PAH and quinone-PAH by high-performance liquid …

Recycled Plastics As Fillers In Polymer Cement Concrete Composites, Shian-Jong Liu

Theses

How to handle the plastic waste is a big task for the modern society in environmental protection. People already focus on it, especially in PET soft drink bottles. Although PET bottle can be reclaimed, its usages are restricted due to the limitation in color and difficulty in purification.

On the other side, concrete is the most common material for human beings to used [sic] in construction. Concrete has good compressive strength, but poor [sic] in flexural and tensile strengths, which limits its applications. So, scientists try to improve its properties by adding the polymer into the conventional concrete, to enhance …

Study Of The Structure And Capacity Of Construction Industry In Pakistan, Tayyab A. Ansari

Theses

The construction industry is the second largest sector in Pakistan's economy after agriculture. It is a fragmented industry which includes very small and very large contracting groups. It includes professional groups such as architects, engineers, management personnel etc. Major part of this industry is dominated by material's suppliers, vendors etc.

In the light of the developments which have taken place particularly over the last ten years, the study has covered the capacity of the construction industry in terms of estimated output, availability of manpower, demand and production of building materials , financial problems, credit, quality of work, the role of …

Softening Response Of Concrete In Direct Tension, Teresa Cintora

Theses

Due to the increased attention in nonlinear fracture mechanics and numerical methods of cementitious material, it has become necessary to have a reliable investigation of the post-peak softening response of concrete under direct uniaxial loading. But due to the brittleness of the material previous researchers have encountered great difficulty in obtaining complete data regarding the load-deformation behavior. This study uses a strain-controlled testing method and therefore the post-peak curve can be more easily obtained. Based on these results a unique formula for the normalized load vs. deformation curve has been proposed to be applied in fracture analysis applications.

On Conventional And Harmonic Load Flow Analysis, Ranjit B. Pradhan

Theses

In conventional power flow analysis, simultaneous linear equations numbering in thousands must be solved repeatedly and in many instances on-line. Luckily the matrix of coefficients of these equations is sparse with a few elements in each row. Therefore for a faster solution and to save computer memory, sparsity must be exploited and an optimal ordering of the equations must be sought. When considering harmonics, the number of the simultaneous equations to be solved is multiplied and therefore, considering sparsity and optimal ordering is doubly important.

In this thesis a software package for optimizing computation time and memory requirements through exploitation …

System Performance Criteria In Cdma Networks Using Gold Codes, Yong H. Kim

Theses

First, we have presented the autocorrelation and crosscorrelation properties for periodic and aperiodic binary sequences. The generation of binary sequences using shift registers with feedback was reviewed. We have also included correlation properties for the Gold codes.

Next, we discussed Gold code generation for the balanced and unbalanced Gold codes.

Thirdly, we investigated the number of simultaneous users in a CDMA system using Gold codes for the worst case and the average case of mutual interference.

Finally, we simulated the probability of interference exceeding a threshold value, and the average crosscorrelation value caused by interference in a CDMA network which …

Modeling And Simulation Of Robot Arms With Flexible Links, John G. Danis

Theses

The design of lightweight robot arms introduces a degree of flexiblity in the individual links which renders the arm difficult to control. Solution of the control problem requires accurate and detailed mathematical models of the arm dynamics. A comprehensive survey of the current literature in this area has shown that although many such models exist, there is a great diversity in their structure, function, and applicability. The different objectives and techniques of model development which lead to this diversity are examined and summarized in this thesis. Bases for classification of the mathematical models and techniques of development are established, and …

An Analysis Of The Dense Packing Of Disks : A Computer Simulated Approach, Jir-Yih Tsaur

Theses

This thesis is concerned with the analysis of dense packing of hard disks. The Voronoi diagram and the geometric neighbours were first computed. The average number of geometric neighbours of a disk is six. It is thus more efficient to choose structural neighbours from among the geometric neighbours than from among all other disks.

Through the Monte Carlo simulation by Rosato et. al., disk configurations after pouring and subsequent shaking were provided for analysis. The mean number of geometric neighbours and the average coordination number were computed. The angular distribution of the structural neighbours was discussed. The packing fraction increases …