Digital Commons Network^™

Arithmetic Pipeline Analysis Package Ii, Sai K. Vedantam

Theses

This work describes the implementation of arithmetic pipeline scheduling algorithms, to enhance an existing simulation package. The user need only specify the arithmetic equations to be processed and the required stage configuration. The program automatically performs the tasks of forming the reservation table, building the pipeline and specifying the input/output connectivity for each segment and multiplexer in the pipeline. This package integrates two existing simulation tools and enhances many aspects of the previous programs.

The main application area for such a tool is education. Since it is very easy to use and requires little or no time for one to …

Distributed Data Collection System Based On Hierarchical Network, Harish Mahindrakar

Theses

On line data collection systems are essential in order to satisfy the requirements for real-time applications. Typical applications are computer integrated manufacturing, security control, hourly wage calculations, human resources management. On line data collection system makes it possible to closely monitor and track different operations with more accuracy. On line data collection systems eliminate redundant work, save time and money.

If the distributed system is based on a multicontroller, it becomes really cost effective solution to build such a system.

This effort is the design of a distributed multicontroller system, required in a data collection system. A hierarchical network is …

Nonlinear, Metal-Clad Optical Waveguide, Bhavesh Patel

Theses

Planar optical waveguides consisting of different types of films including nonlinear films with metal cladding have been studied theoretically. Ideal metal cladding with σ = ∞ and nonideal metal cladding with σ ≠ ∞, that is, with complex refractive index is considered to get electric field and wave number for TE₀ mode. For nonlinear material, approximate solution is derived in a series form using Rayleigh-Schrodinger method. The appropriate eigenvalue equations are solved by Newton-Raphson iteration method. For self-focusing media in the center, the propagation constant increases with increasing power and with self-focusing media in the cladding the propagation constant …

Reduced Complexity Receivers For Trellis Coded Modulations Via Punctured Trellis Codes, Bonchul Koo

Theses

We introduce a new concept, called matched punctured trellis encoding, that simplifies the complexity of Maximum Likelihood Sequence Estimation (MLSE) receivers for combined trellis encoding and modulations with memory. Matched punctured trellis encoding is applied to tamed frequency modulation (TFM) which is a bandwidth efficient correlative - FM scheme. TFM finds applications in satellite, microwave radio, and mobile communications.

Our approach is based on puncturing a rate - 1/2 matched convolutional code to obtain a rate - 2/3 mismatched code. A matched code is one that produces trellis coded modulations of minimum complexity. Puncturing these codes to obtain mismatched codes …

Slurry Wall Backfill Integrity And Desiccation, Mahendraratnam Thilliyar

Theses

The upper reaches of slurry wall, in a waste containment structure may under go cycles of wetting and drying, because of seasonal ground water level fluctuations. This may result in desiccation and cracking of back fill material. Experiments were conducted to study these effects with water, aniline, phenol, hydrochloric acid solutions on soils containing different proportions of bentonite, kaolinite, and sand. The largest crack was formed with phenol and the smallest with water. With hydrochloric acid no crack was formed. With increase kaolinite content, the width and density of crack decreased. Hydraulic conductivity tests on cracked specimens indicated high hydraulic …

Trellis Coded Partial-Response Channels, Kumari Yalamanchili

Theses

Binary partial-response channels with transfer functions (1+D), (1-D) and (1 — D²) are intersymbol-interference channels which find applications in baseband data communications and magnetic recording systems (tapes, discs, compact discs, etc.). In this thesis we develop a coding technique for improving the reliability of digital transmission over noisy partial-response channels with the above transfer functions. We do so by introducing a new concept, called matched encoding, which arises in the context of trellis coding for channels with memory.

We use inner and outer trellis coding of the partial-response channels. The inner codes called matched inner coset codes, are …

Ph Parametric Pumping : An Examination Of Different Feed Locations For A Two And Three Column Process With The Same Flow Patterns And Ph Distribution, Roberta Rosty

Theses

PH parametric pumping is used to separate protein mixtures of hemoglobin and Albumin.

In this thesis, modifications to a two-column process, where the fluid stage flow pattern and the pH distributions were constant, were explored. These modifications consisted of: changes in the feed stream inlet and outlet locations, changes in the amount of feed itself, and an addition of another column and reservoir to the original two-column process. The results were obtained through computer simulation.

Results indicate that the batch or no-feed two and three column processes yield better separations of the two proteins than the same processes with feed …

Performance Enhancement & Fault Detection Of Cmos Dynamic Logic For Vlsi, Ashok Arunachalum

Theses

New CMOS dynamic latches are designed which can be used along with conventional dynamic circuits to realize fast pipelined dynamic logic. Also a new method is described for detecting the difficult CMOS Non-classical faults viz. stuck open and stuck on faults. The conventional Domino logic is redesigned to make all the stuck open and stuck on faults detectable.

Transverse Electric (Te) And Transverse Magnetic (Tm) Mode Conversion In Optically Active (Chiral) Embedded Polymeric Waveguides, Mingdeh Chien

Theses

Wave propagation in an optically active isotropic, polymeric thin film waveguides is studied. The waveguides are fabricated using the dipping method. Thin film layers are composed of a passive PMMA (poly methyl methacrylate) host material and a chiral, optically active, ((s)-(+)-1,1'-Binaphthyl-2,2'-dily hydro phosphate), guest material. Experimental results show about 1° per centimeter rotation of polarization as light propagates through a 1.8cm waveguide. The theoretical analysis of the mode structure and wave propagation in the waveguide are examined using first order coupled mode theory. TE (-4 TM mode converter is a typical application of this investigation.

Digital Image Restoration Using Power Spectrum Equalization Filtering Technique, Debdatta Sen

Theses

Digital deblurring of micro-circulatory images using both homomorphic and power spectrum equalization filtering are considered. An existing homomorphic filter was modified by changing filter parameters. This permitted an image with better contrast to be obtained. The power spectrum equalization approach consists of modeling and characterization of degradation and estimation of the power spectrum of the image using the Welch method. The restoration is considered from the point of view of spatial-frequency domain descriptions of images. Consideration is restricted to degradations arising from additive noise and spatially invariant linear blurring. The filter restores the power spectrum of the image to what …

Firmware Toolkit For Larynx Synchronous D.S.P., Shih-Chieh Su

Theses

During the past ten years, digital signal processing has been an extremely active and dynamic field. Advances in integrated circuit technology and in processor architecture have greatly enlarged the scope of the technical areas to which digital signal processing techniques can be applied. Research in fundamental signal processing techniques and algorithms has led to dramatic improvements in the efficiency of signal processing systems.

This thesis creates a fast and cheap DSP package for 8052AH-BASIC. This is a useful and potential package when we apply research in speech science and medical diagnostics. It exploits the latest software-in-silicon technology to create a …

A Microcomputer Based Non-Invasive Cardiopulmonary Monitor Using A Microwave Interferometer, Tanmoy K. Basu

Theses

With a microwave interferometer the vibrational velocity of the anterior (front), as well as posterior (back) chest wall can be monitored and recorded. The recorded signals are a reflection of the mechanical cardiac activity within the chest cavity, as opposed to Electrocardiogram (ECG) which is a reflection of the electrical cardiac activity. The interferometer recordings are obtained with no physical contact between the instrument and the subject. Moreover, the subject can be fully clothed since microwave energy readily passes through normal dry clothing.

A microwave interferometer that is capable of detecting the vibrational velocity of the surfaces of the chest …

Generation Of Atomic Nitrogen By Gas Discharge In Microwave Cavity, Jong-Shun Shieh

Theses

A microwave discharge system for producing atomic nitrogen at low flow rate and low pressure has been investigated. The molecular nitrogen passes through a microwave cavity in a quartz tube and is dissociated by the microwave energy. Subsequent recombination of nitrogen atoms produces a characteristic yellow glow due to the relaxation of excited molecular nitrogen to its ground state. The titration of nitric oxide with atomic nitrogen was used to measure the atomic nitrogen yield. At a 2 sccm nitrogen flow rate the atomic nitrogen yield was 8.75*10¹⁵ atom/sec, which corresponds to a nitrogen generation efficiency of about 1%. …

A Wideband Continuous Phase Shifter For Ka-Band, William J. Tanis

Theses

The design, fabrication and test of a 45 degree microstrip phase shifter capable of full Ka-band performance is presented. The design uses a Lange coupler with two ports terminated with beam-lead varactor diodes to provide continuous phase shift. Although this concept has been employed at X-band and below, this thesis demonstrates its feasibility for wideband use at frequencies as high as 40 GHz. The design uses thin-film capacitors, beam-lead diodes, simulated grounds, and air bridges to achieve a planar geometry and to simplify the production process. Detailed test results using various test circuits are shown for comparison to actual phase …

X.25 Interface Packet Level Simulation, Arvind Tewari

Theses

An X.25 interface was simulated at the packet level and data packets successfully transmitted from the Data Circuit-Terminating Equipment (a process) to the Data Terminal Equipment (another process). This was executed interactively. Two independent processesg were generated on the AT&T 3B15 computer and inter-process communication (IPC) used to transfer the data. The X.25 interface is based on the Open System Interconnection (OSI) model of the International Standards Organization.

Durability Of Slurry Cut-Off Walls Around Hazardous Waste Sites, M. Khalid Umer

Theses

A study was undertaken in order to provide insight into the behavior of backfill materials when in contact with hazardous chemicals. It was found that the liquid limit is not a reliable parameter in assessing clay behavior when exposed to these chemicals. However, the expansion index provided a consistent correlation to permeability when all other conditions were kept constant. In addition, the use of fly ash mixed with clay showed an increase in the values of permeability even though its grain size is finer than that of sand. It is believed that this phenomenon was the result of the absence …

Design Of A Lan Based Data Acquisition System For Sensor Applications, Krishna Murthy Uppunda

Theses

This thesis presents the design of a local area network (LAN) based data acquisition system for sensor applications. The circuit designed forms the robotic LAN (RLAN) interface between the sensor IC nodes and the ARCNET network. The RLAN network uses two packet protocols. The sensor data request (SDR) packet is received by the sensor IC nodes and the sensor transmits the sensor data (SD) packet. The RLAN interface provides a two way communication between the sensors and the ARCNET network. Whenever an ARCNET node receives the SDR packet, it stores the packet temporarily in a 1k RAM buffer. The RLAN …

Study Of Steel-Concrete Interface Behavior Of Reinforced Concrete Members, Jun Wan

Theses

The main objective of this thesis work is to study the steel-concrete interface behavior of reinforced concrete members using the nonlinear finite element method.

The reinforced concrete member was modeled as a continuum consisting of plane stress rectangular elements which represent the concrete, pin-joint two node bar elements which represent the reinforcing steel, and the nondimensional linkage elements which represent the bond stress-slip, aggregate interaction and dowel action effects. The load increment procedure is employed to carry out the nonlinear analysis.

An axially loaded tensile specimen, a deep beam specimen and a shallow beam specimen were analyzed. The results from …

Use Of The Lms Algorithm In Ecg Analysis, Xiaohua Yang

Theses

The purpose of this thesis is to develop an IBM PC-AT based system to effectively process electrocardiogram (ECG) signals. Adaptive filter theory is used to implement a noise cancellation system (adaptive noise canceller), which adaptively cancels the ECG signals resulting in real ECG noise. The adaptive process is based on the well known least-mean square (LMS) algorithm.

The noise canceling system is software based. Several programs have been written, which include analog to digital converter control, data acquisition and storage, data retrieval, adaptive filtering and digitized data graphics.

The thesis presents numerous computer experiments. The performance of the adaptive noise …

Experimental Evaluation Of J-Integral For Concrete Subjected To Impact Loading, Naishan Zhang

Theses

This thesis presents an experimental evaluation of J-integral for concrete subjected to impact loading. Twenty four three-point bend specimens with two different thicknesses and mid-span notch lengths were tested under impact velocities of 167.22 in/sec (424.74 cm/sec) and 261.78 in/sec (664.92 cm/sec). Multi specimen method was used to analyze and estimate J_I and its critical J^-Ic values. Effects of specimen thickness and impact velocity on J^-Ic values were observed and discussed. Evaluation of J^-Ic Values from the experimental results of this study indicated that can be characterized as a material constant even under different impact velocities. …

Environmental Assessment In Bioethanol Technology Using Immobilized Yeast Cells, Minoo Kandy Zarnegar

Theses

This study is undertaken from the standpoint of water pollution evaluation in bioethanol technology, using immobilized yeast cells. Evaluation of water pollution caused by immobilized yeast fermentation is the main objective of this research.

The pollution in water remaining at the end of ethanol production, which is normally discharged in the wastewater stream, has been analyzed by the measurement of biological oxygen demand (BOD), since BOD measurement is one of the widely used parameters for water pollution evaluation. BOD obtained from produced water (stillage) was between the range of 115- 360 mg/l. The variation in BOD depended upon the removal …

The Influence Of Aggregate Grading With Two Different Binders On Mechanical Strength Of Polymer Concrete, Pei-Yuan Gao

Theses

The scope of this research is to study the influence of grading of the aggregate on the mixing design and the strength of polymer concrete .

Also, the curing conditions, the modification of polymer and the application of coupling agent were investigated.

Based on the experimental results, two numerical methods were developed to be used in combining the aggregates to obtain the desired specific surface area and the grading of the aggregate.

A computer program was developed for one of the methods to give all the possible compositions of the aggregate.

Theoretical explanation is offered and a numerical example is …

Thermodynamic And Leaching Studies Of Various Systems, Satya D. Rami

Theses

The group contribution approach is a reliable and fast method for the prediction of liquid phase activity coefficients in none lectrolyte, nonpolymeric mixtures at low to moderate pressures and temperatures between 300 and 425 K. It has become widely used in practical chemical engineering applications in cases where little or no relevant experimental information is available.

The two group contribution methods examined in the course of this work, are the Knox and & UNIFAC models. Group interaction parameters are evaluated for each of these models and results compared. Although the results for both models are similar when sufficient data are …

Molecular Modeling In Anatoxin And Other Semirigid Agonists, Wen-Chung Shang

Theses

Conformational search and molecular mechanics calculations were combined to investigate the structural flexibility of isoquinolone, the anatoxin series, and the ferruginine series. Ring searching allow all rational conformations to be generated.

Isoquinolone shows conformational similarity to isoarecolone but is much less potent which suggests that the proximity of the methyl group beta to the carbonyl groups affects the bioactivity of isoquinolone. The very active agonist-anatoxin, without a similar conformation as isoarecolone, shared a similar electrostatic potential contour in the vicinity between the two atoms connected to the electro-positive nitrogen and hydrogen bonding site. These phenomena were not found in ferruginine …

A Research Analysis : Differences Between Contemporary Corporate Management And Entrepreneurial Management, Kevin A. Gugliotta

Theses

A research analysis was conducted to distinguish the differences between contemporary corporate management and entrepreneurial management. A major difference is in the attitude, perception, and priority of the senior management and the organizational mission. Other distinguishing differences are related to individual and organizational leadership, organizational hierarchy and structure, decision-making authority, and compensation systems for employees.

Design Of A Temperature Sensor For Gallium Arsenide Ic Applications, Raviprakash Raviprakash Gutala

Theses

This thesis presents the design of a temperature sensor circuit including sensor, differential amplifier, and a memory element for gallium arsenide IC standard cell applications. A standard 1-um depletion-mode GaAs MESFET technology has been used for the design of the circuit. The circuit is intended to be used as a standard cell in GaAs les providing an alarm when the sensor temperature reaches 125 °C. The circuit includes a NAND latch which is set when the chip cell temperature reaches 125 °C. The output of the latch can be sensed by additional circuits (on or off the GaAs chip) which …

Progressive Transmission Of Images Using Pyramidal Structure, Chin-Hua Hsu

Theses

A progressive image transmission scheme based upon Laplacian pyramid structure is used for image coding over low-bandwidth channels. The filtering and differential pulse code modulation (DPCM) methods of image coding are generalized to allow quantization of the Laplacian images. Filtering is performed with a local, symmetric weighting function. The three different quantizers, (1) scalar quantizer, (2) memoryless vector quantizer (VQ), and (3) finite state vector quantizer (FSVQ), are used here to compare the results. In the receiver end, the image can be reconstructed using reverse procedure. The reconstructed image is not the same as the original image because of the …

Microprocessor-Based Processing Unit Implemented By Xilinx Programmable Logic Array, Lee Chuan Hu

Theses

The 8052 microprocessor-based processing unit is a super single board computer with many unusual features: memory page selecting with page indicators, on-board EPROM/PROM programmer, real time clock, battery back-up RAM, and memory mapped I/O. It is implemented by using Xilinx programmable logic array and can be used for various instruments. Xilinx user-programmable Application-Specific Integrated Circuit (ASIC) is a large logic array with up to 9000 equivalent gates. The advantages of programmable logic devices over standard ICs are more flexibility, design security, lower cost, higher performance, reduced power consumption, smaller size, and increased reliability. The system development time is also greatly …

Ionitriding To Improve The Wear Resistance Of Ferrous Materials, Ravi K. Kodali

Theses

In this work the effect of ionitriding treatment on wear resistance of ferrous materials was studied. A basic understanding of the ionitriding concepts were given and the advantages of this process over other conventional nitriding treatments were outlined. The effect of various parameters like gas composition, temperature, pressure, process duration and power density on the metallurgical aspects of this process were discussed. Under technical aspects of this technology, advantages of pulsed direct current over conventional direct current nitriding systems were given. In this work wear tests were performed on components made from gray cast iron, alloy steel (AISI 4340), and …

Reliability Problems And Failure Mechanisms In Ic Packaging, Dilip J. Patel

Theses

Today, reliability is acknowledged as an important item in design and operation of electronics circuits and system.

This thesis provides information on evaluation of the reliability for hermetic and non hermetic IC packages made by different manufacturers.

Literature study concentrates on the reliability and related problems in IC packages developed between 1970 and 1988.

Several failure mechanisms and failure modes are discussed to point out how higher reliability in IC packages may be achieved.

The bibliography is given in a chronological order to help further research in this area.