Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

New Jersey Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 5821 - 5850 of 6003

Full-Text Articles in Entire DC Network

The Mechanism Of Second Breakdown In Transistors, Eugene David Fabricius Jun 1968

The Mechanism Of Second Breakdown In Transistors, Eugene David Fabricius

Dissertations

The purpose of this dissertation is to examine the behavior of electrons and holes in a semiconductor or diode under conditions of high current density as a function of temperature, and to relate this behavior to the phenomenon of Second Breakdown. The approach used is that of magnetohydrodynamics, the electrons and holes being treated as a plasma "gas" embedded in the dielectric of the semiconductor.

This approach is unique in the following respects:

  1. This is the first attempt to explain second breakdown in terms of magnetohydrodynamics.
  2. This is the first time an explanation of pinching in a solid at room …


The Generalized Virial Equation Of State, Ghanshyam R. Patel Jun 1968

The Generalized Virial Equation Of State, Ghanshyam R. Patel

Dissertations

A generalized three parameter virial equation of state has been developed and tested for seven pure gases having different molecular characteristics. The equation has also been tested for more than thirteen binary gas mixtures using three different mixture rules. The final equation is as follows:

Z = 1 + B(T)/V + C(T)/V2 + D(T)/V3 + E(T)/V4 + VF(T)/eaV + VG(T)/ebV

The expressions for E(T), F(T), and G(T) along the critical isotherm were derived in terms of critical properties and two constants, a and b which appear in the sixth and seventh terms in the above …


Realization Of Transfer Impedances Using Distributed Rc Elements In A Common Ground Linvill Configuration, Walter Woronka Jun 1968

Realization Of Transfer Impedances Using Distributed Rc Elements In A Common Ground Linvill Configuration, Walter Woronka

Theses

One of several synthesis procedures available for the realization of a transfer admittance is that of Linvill. This synthesis procedure employs an active element, a negative impedance converter (NIC), to shift the poles of passive immittance functions from the negative real axis into the complex plane to realize the desired transfer immittance function.

The Linvill synthesis procedure is extended to networks containing cascaded distributed RC elements and the conditions which must be satisfied to realize a transfer impedance using these distributed elements are defined.


Noise Spectral Density As A Diagnostic Tool For Reliability Of P-N Junctions, Young Duck Kim May 1968

Noise Spectral Density As A Diagnostic Tool For Reliability Of P-N Junctions, Young Duck Kim

Dissertations

The feasibility of choosing noise-voltage spectral density as a prediction parameter for the degradation of p-n junctions has been examined both theoretically and through a series of life-tests.

Experimental facts show that the noise-voltage spectral density, Sv(w), observed in a p-n junction under the breakdown condition tends to be "white" (which contradicts the 1/f-noise theory), and Sv(w) is inversely proportional to the breakdown current (which contradicts the shot-noise theory). Furthermore, some p-n junctions display one or more multiple peaks of Sv(w) at different current levels which can not be explained by any of the …


Reliability Considerations For Communication Satellites, Frank Polizzi May 1968

Reliability Considerations For Communication Satellites, Frank Polizzi

Theses

A detailed program covering all phases of reliability for a communication satellite was presented. In long mission programs such as this one, reliability is the prime consideration in assuring a successful accomplishment of the stringent goals set forth. Reliability principles and methods were incorporated in delineating each major task in the program. These principles and methods not only aided the reliability personnel in performing their duties better, but also assisted the design group, manufacturing personnel, and the testing and evaluation group in performing their jobs efficiently by being aware and knowledgeable of reliability engineering.

Various reliability disciplines were imposed, as …


A Study Of The Properties Of The Biconical Antenna, Kurt Frank Hafner Jr. May 1968

A Study Of The Properties Of The Biconical Antenna, Kurt Frank Hafner Jr.

Theses

Expressions are found for the fields produced by TM and TEM modes along a finitely conducting biconical antenna. Expressions are also found for the TM and TEM fileds along a biconical antenna having a lossy dielectric coating. It is shown that the antenna losses produce an anntenuation of the the fields along the antenna. It is found that because there is a dispersion of the fields along the biconical antenna, the attenuation produced by the losses is, in genaral, not characterized by simple exponential.

A solution is obtained for the fields of the TEM wave along a biconical antenna coated …


Newark College Of Engineering Catalog Of Graduate Programs 1968-1969, New Jersey Institute Of Technology Jan 1968

Newark College Of Engineering Catalog Of Graduate Programs 1968-1969, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.


Newark College Of Engineering Catalog Of Undergraduate Day And Evening Programs 1968-1969, New Jersey Institute Of Technology Jan 1968

Newark College Of Engineering Catalog Of Undergraduate Day And Evening Programs 1968-1969, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.


Heat Transfer Between A Turbulent Round Jet And A Segmented Flat Plate Perpendicular To It, John Edward Chamberlain Dec 1967

Heat Transfer Between A Turbulent Round Jet And A Segmented Flat Plate Perpendicular To It, John Edward Chamberlain

Theses

Heat transfer between a room temperature, turbulent round jet and a segmented flat plate perpendicular to it has been investigated.

The heat transfer surface consisted of invar rings insulated from each other with silicone rubber. The source of heat was steam at atmospheric pressure condensing on the back of the heat transfer surface.

Since data were taken over a wide range of vertical distances between the nozzle and the flat surface both the potential cone and the fully developed regions of the jet were observed interacting with the heated plate.

It was determined that two modes of heat transfer occur; …


Relationships Between Some Properties Of Pure Homologous Organic Liquids, Herbert Rudolph Kemme Jun 1967

Relationships Between Some Properties Of Pure Homologous Organic Liquids, Herbert Rudolph Kemme

Dissertations

The vapor pressures of eleven primary straight chain alkyl chlorides and eleven primary straight chain alcohols between C3 and C16 were determined within a range of 5 to 760 mm Hg. These data were obtained by determining the boiling points of the pure materials at various pressures by using differential thermal analysis. The boiling points were determined with a precision of -.1 degree Centigrade at a 95 per cent C.I. The Antoine equation was used to analytically describe the data. The constants for this equation were determined by a multiple linear regression technique for each individual compound. The heats of …


Open-Loop Frequency Response Analysis Of A Jacketed Kettle With Internal Heating/Cooling Coil, Wayne P. Brenckle Jun 1967

Open-Loop Frequency Response Analysis Of A Jacketed Kettle With Internal Heating/Cooling Coil, Wayne P. Brenckle

Theses

This work was performed to investigate the response and stability of a jacketed kettle with internal heating/cooling coils and glasteel thermowell. This system was first analyzed mathematically by deriving transfer functions for each component and then combining all component equations together to give the overall system transfer function. The mathematical model was then checked by frequency response analysis of the system. Bode plots of the system were prepared and the effect of the thermowell was analyzed.

Nyquist plots of the system were used as the criteria for determining stability, and obtaining the open-loop gain necessary to give optimum closed-loop response. …


A Computer Program For Multicomponent Distillation From Start Up To Steady State, Leo Julian Jun 1967

A Computer Program For Multicomponent Distillation From Start Up To Steady State, Leo Julian

Theses

A computer program is presented which develops for a multicomponent distillation column a composition and temperature profile as a function of time from initial start-up to steady-state conditions.

The program is written in Kingston Fortran II language for use on an IBM 1620 II machine. It is a Thiele-Geddes type solution, i.e. the total number of plates, feed plate, overhead and bottoms split are specified and the solution gives plate. compositions and temperatures. The material balance at any time is based on the composition at the previous time, increased (or decreased) by the net quantity added and removed as a …


Approximation Of Reaction Rate Models, Hsu-Tung Lee Jun 1967

Approximation Of Reaction Rate Models, Hsu-Tung Lee

Theses

In reaction rate studies, experimental data is interpreted and correlated in terms of various mathematical models. The converse of the modeling of practical problems is the task- of experimental determination of reaction mechanisms. Generally, this approach is classified into integral and differential methods. Both involve trial and error techniques. The mathematical model which satisfies the test becomes the equation for mechanistic representation.

Both the integral and differential methods have been tried. Generally speaking, the differential method is more advantageous than the integral. For one thing, the parameters which are involved in the nodal can be determined directly by the differential …


The Measurement Of Dispersion Coefficients, John Harold Rosenberger Jun 1967

The Measurement Of Dispersion Coefficients, John Harold Rosenberger

Theses

This work describes a method of determining axial dispersion coefficients in a packed bed chemical reactor. This is done by measurement of the fractional conversion of acetic anhydride to acetic acid, by first order reaction in dilute solution. The reaction is carried out at various flow rates in a four inch diameter reactor packed with one-half inch Raschig rings. analysis is by the aniline-rater method. Calculation of the dispersion coefficients is by trial using a digital computer. The results are presented graphically and compared to results obtained by other methods. The results of this study are found to correspond to …


Nucleus 1967, Newark College Of Engineering May 1967

Nucleus 1967, Newark College Of Engineering

Yearbooks

This is a digitized, downloadable version of the Newark College of Engineering Nucleus.


The Frequency Response Analysis Of A Reboiler-Condenser Under Condensate Control, Douglas F. Ready May 1967

The Frequency Response Analysis Of A Reboiler-Condenser Under Condensate Control, Douglas F. Ready

Theses

In this investigation, the dynamics of a reboiler-condenser pair, with the reboiler operating under condensate control, were analyzed both theoretically and experimentally, and the results of the two analyses compared.

The theoretical analysis was performed using the standard method of Laplace transform transfer function synthesis.

The experimental study consisted of a frequency response analysis of the system response to sinusoidal variations of the steam condensate rejection rate.

Two mathematical models were developed, one quite rigorous but extremely cumbersome, the other neglecting all but the most important factors for the sake of simplicity.

The experimental data (in the form of Bode …


Carburizing Of Steel Using "Cracked" Methane, Robert Alvin Hesse Jan 1967

Carburizing Of Steel Using "Cracked" Methane, Robert Alvin Hesse

Theses

An attempt was made to carburize steel using cracked methane, industrial terminology for methane burned in air over a catalyst to give carbon monoxide and hydrogen, as the carburizing agent. Initial tests in a laboratory scale furnace using steel in chip form showed that, the feasibility of this method was excellent. These tests also indicated that a good method of control of the carburizing would be by a system that could measure the dew point of the gases introduced into the furnace. The next step was to apply the method of carburizing to small production size lots of bearing components. …


Newark College Of Engineering Catalog Of Graduate Programs 1967-1968, New Jersey Institute Of Technology Jan 1967

Newark College Of Engineering Catalog Of Graduate Programs 1967-1968, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.


Newark College Of Engineering Catalog Of Undergraduate Day And Evening Programs 1967-1968, New Jersey Institute Of Technology Jan 1967

Newark College Of Engineering Catalog Of Undergraduate Day And Evening Programs 1967-1968, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.


Design Of Feedback Control Systems With Transport Lag By Parameter Plane Techniques, Lawrence Eisenberg Jun 1966

Design Of Feedback Control Systems With Transport Lag By Parameter Plane Techniques, Lawrence Eisenberg

Dissertations

A method is presented for the exact determination of absolute and relative stability of linear feedback control systems containing transport or distributed lag. All results are in terms of two variable system parameters. The method utilizes an extension of modern parameter plane techniques that allows for the inclusion of transcendental functions in the system characteristic equation. The design of controllers in linear systems containing transport lag is then considered. A design technique is proposed that allows for the systematic determination of two variable controller parameters in order to meet frequency or time domain design specifications.

The design technique is formulated …


Vapor-Liquid Equilibria System : Chloroform, Carbon Tetrachloride, Isopropanol, Barnet H. Bursack Jun 1966

Vapor-Liquid Equilibria System : Chloroform, Carbon Tetrachloride, Isopropanol, Barnet H. Bursack

Theses

A study was made of the vapor-liquid equilibria of the ternary system: Chloroform (CHCl3), Carbon Tetra-chloride (CCl4) and Isopropanol (C3H8O). An Othmer still was used for the equilibria determination. Refractive index and density measurements were used to determine liquid and vapor compositions. A comparison between experimental and theoretical values was made using the Margules 3-suffix ternary equations for the correlation.

It was necessary to investigate the vapor-liquid equilibria of each of the three binary systems to evaluate the techniques and equipment used and obtain new data. Only one previous investigation of the …


Effects Of Non-Constant Molal Flow On Distillation Plate Separation, Joseph Lawrence Niedzwiecki, W. Weissman Jun 1966

Effects Of Non-Constant Molal Flow On Distillation Plate Separation, Joseph Lawrence Niedzwiecki, W. Weissman

Theses

This thesis presents new equations for predicting degree of separation on a distillation plate, recognizing non-constant molal flow effects. A FORTRAN program is included for solving the new equations. Experimental runs were made for comparison to theoretical predictions.

First an equation is derived for predicting separation at a point on a distillation plate. The derivation is analogous to Murphree's point efficiency equation except that the effects of flow between phases are included by applying the Colburn-Drew theory. Finally, an overall plate separation equation is derived analogous to the A.I.Ch.E. eddy diffusion model for Murphree plate efficiency, except that the rate …


The Kinetics Of A Heterogeneous System, Francisco H. Fernandez-Ortega, Gonzalo D. Milian Jun 1966

The Kinetics Of A Heterogeneous System, Francisco H. Fernandez-Ortega, Gonzalo D. Milian

Theses

The reaction between an acidic potassium dichromate solution and metallic copper has been studied at 25.0°C under batch quiescent and continuous flow conditions.

The effect of time of reaction, reactor diameter, acid, dichromate, and salt concentration upon reaction rate have been investigated for a quiescent batch reactor and found to influence the Reaction Velocity Constant of the system. As the reaction progressed, the Reaction Velocity Constant was observed to decrease. An increase in reactor diameter resulted in a Reaction Velocity Constant increase. Small increments in the dichromate concentration produced a decrease in the Reaction Velocity Constant. A maximum point of …


Nucleus 1966, Newark College Of Engineering May 1966

Nucleus 1966, Newark College Of Engineering

Yearbooks

This is a digitized, downloadable version of the Newark College of Engineering Nucleus.


A Systematic Evaluation Of Alternate Chemical Routes, Arthur H. Bobis Apr 1966

A Systematic Evaluation Of Alternate Chemical Routes, Arthur H. Bobis

Dissertations

A systematic method for selecting from among alternative routes for chemical synthesis is developed and presented. Consideration is given not only to making the best decision, but of reaching that decision with a minimum of experiments.

A method is developed whereby the calculated differences in process cost due to variations in the levels of such responses as chemical yield, usage and recovery are displayed graphically. Such a representation by indicating the potential worth of any experiment focuses attention on those parts of the synthesis which have an economic bearing on the ultimate process cost.

The probability of achieving a particular …


Newark College Of Engineering Catalog Of Graduate Programs 1966-1967, New Jersey Institute Of Technology Jan 1966

Newark College Of Engineering Catalog Of Graduate Programs 1966-1967, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.


Newark College Of Engineering Catalog Of Undergraduate Day And Evening Programs 1966-1967, New Jersey Institute Of Technology Jan 1966

Newark College Of Engineering Catalog Of Undergraduate Day And Evening Programs 1966-1967, New Jersey Institute Of Technology

Course Catalogs

No abstract provided.


Prediction Of Batch Heat Transfer Coefficients For Pseudoplastic Fluids In Agitated Vessels, Donald William Hagedorn Jun 1965

Prediction Of Batch Heat Transfer Coefficients For Pseudoplastic Fluids In Agitated Vessels, Donald William Hagedorn

Dissertations

Experimental batch heat-transfer data were obtained for both Newtonian and pseudoplastic liquids in a baffled agitated vessel. The fluids tested had flow behavior in-dexes between 0.36 and 1.0; and the apparent viscosity ranged from 1 to 1200 centipoise. Four types of impellers (anchor, paddle, propeller, and disk and vane turbine) were studied using eleven separate impellers. The probable error in the measured heat transfer coefficient was ± 20 percent.

The effects of the generalized Reynolds number, generalized Prandtl number, and viscosity ratio were studied. In addition the effect of impeller diameter was studied for paddles, propellers, and turbines; and the …


Cation Exchange Between Solutions Of Ferric Nitrate And Dowex 50x-8 Resin, Michael H. Mansky Jun 1965

Cation Exchange Between Solutions Of Ferric Nitrate And Dowex 50x-8 Resin, Michael H. Mansky

Theses

The rate of exchange of ferric ions from solutions of ferric nitrate and hydrogen ions from Dowex 50X-8 has been studied in an agitated bed ion exchange column over a range of bed loading conditions. Agitation has been maintained in a regime known to indicate film diffusion control of rate in small scale batch reactors.

Calculated diffusion coefficients for the column are slightly higher than those determined in the batch reactor because of greater turbulence of agitation in the column.

The assumption of previous investigators concerning linearity of equilibrium data has been found to be invalid for the system studied. …


The Thermal Conductivity With Vapor Pressure For N-Paraffin Hydrocarbons, Jacob Tolsma Jun 1965

The Thermal Conductivity With Vapor Pressure For N-Paraffin Hydrocarbons, Jacob Tolsma

Theses

A literature search of the thermal conductivity of pure liquids has been made and experimental values have been compiled. Study of the theory of the thermal conductivity of liquids indicated that a relationship exists between thermal conductivity and viscosity. Previous investigations have found an almost linear relationship between the logarithms of viscosity and vapor pressure for n-paraffin hydrocarbons. In this investigation the logarithm of thermal conductivity plotted versus the logarithm of vapor pressure for the same series was also found to be almost linear. The equation of the line when combined with a linearized Antoine equation in terms of the …