Digital Commons Network^™

Heart Rate Variability Study Using Phase Response Curve, Peizhuan Zhang

Dissertations

A noninvasive phase resetting experiment on human subjects was investigated. The phase response curve was estimated and was used to demonstrate cardiac phase resetting due to a vagal input. The estimated running phase response curve showed that the cardiac cycle resetting depended on the time and the amplitude of the vagal stimulation. The phase response curve was then studied using time circle analysis, topological analysis and nonlinear dynamics analysis. Also phase entrainment and stimulus frequency dependence of the phase response were evaluated. Further, the Van Der Pol model, Generalized Additive model and Knight and Peskin's model were used to simulate …

Dynamic Friction Measurement, Atif Aly

Theses

The friction force between two bodies sliding at constant relative velocity is a function of their relative velocity. Under conditions of time-variable relative velocity, the instantaneous friction is a function not only of the instantaneous velocity but also the velocity history. An understanding of the resulting dynamic friction function will allow for the design of control systems where velocity is time-varying, oscillatory andoften contained in a relatively small region centered around zero amplitude. Within the control system, a portion of the control force can be implemented to effectively counteract the friction present and allow for precise motion control.

In this …

Modeling, Simulation And Hemodynamic Response Analysis Of Arteriovenous Malformation Occlusion, Huijuan Mao

Theses

The cerebral Arteriovenous Malformation system (AVM) or fistula, is a network with large caliber vessels that yields an alternate pathway for blood flow between arteries and veins. Neurosurgical and interventional radiological techniques are the common way to treat AVM patients so that the normal capillary blood flow would be restored. Several patients who underwent this procedure had different degrees of brain swelling and subsequent hemorrhage. To understand this, Blesser et al. developed a simplified model to simulate the effect of AVM occlusion on cerebrovascular pressure and flow. Their model does not include the cerebrovascular regulatory mechanism which is an important …

Low Temperature Performance Of Field Effect Transistors, Wei Zhu

Theses

The low temperature static characteristics of silicon junction field-effecttransistors (JFETs) have been investigated and analysed. The followingchanges were observed after cooling down the transistors: pinch-offvoltage and transconductance increases; and drain current is changedas a function of the drain-source voltage. It was found that there wasan increase in the amplifying properties and a reduction in noise voltageof cooled transistors. In addition, the temperature and voltage dependenceof leakage current have been studied. Temperatures below 77K are ofinterest in evaluating effects of impurity freezeout and temperatureabove 77K are important since actual device temperature will be aboutthe ambient. Operation of FET circuits at liquid …

Performance Analysis Of The "Fiber Distributed Data Interface (Fddi) Network" Using Petri Nets And Spnp Software Package, Savvas Eteoclis Christodoulou

Theses

The main purpose of this thesis is to model a "Fiber Distributed Data Interface" (FDDI) Network using Petri Nets, and to analyze its performance with the help of the SPNP software package. The verification of a communication protocol, by modeling it as a discrete-event system using Petri Nets is a new approach.

The correlation between the throughput rate, voice and data throughput, and the parameters of the system, such as the network load and the network speed are investigated. An overview of the "Fiber Distributed Data Interface" is provided, along with its network protocol and the limitations of its operating …

Multi-Disk Subsystem Organizations For Very Large Databases, Zhiyi Huang

Theses

This thesis investigates efficient mappings of very large databases with non-uniform access to its data. to a. multi-disk subsystem.

Two algorithms are developed to distribute the database across multiple disks, possibly with replication, in order to minimize latency and maximize throughput. These algorithms are compared with respect to the amount of replication overhead incurred to achieve desired throughput.

A simulator is developed to simulate these two mapping algorithms and investigate the efficiency of these two mappings.

Remediation Of Contaminated Sites Using Hot Gas Injection, Sanjay Jayabal

Theses

Remediation of contaminated subsurface sites at lower cost and time than currently used technologies are being demonstrated for a systems concept using new technology developed at the Hazardous Substance Management Research Center at New Jersey Institute of Technology. A technique for pneumatic fracture is employed to "open" subsurface passages to enhance vacuum extraction of contaminants. Economical and environmentally sound destruction of these contaminants is then accomplished using catalytic oxidation followed by scrubbing to remove air pollutants. The hot gas from this phase of the process is then injected into the subsurface formation after being used to preheat the fuel/air mixture …

Applications Of Binary Sequence Of Order K, Xulun Jiang

Theses

The cumulative distribution of the finite sum of the binary sequence of order k is studied and some of its applications discussed. Certain properties of this sequence are studied and uniformly superior bounds for the cumulative distribution under minimal information on the "success" probabilities are derived.

As an application, an optimal randomized response model to collect sensitive information with dependence in the sample is proposed. This dependence is caused by untruthful response to stigmatizing questions and has been ignored in the past procedures.

The proposed method is useful in collecting reliable information in situations where the response is difficult to …

Measurement Of Oxygenated Volatile Organic Compounds Using The Thermionic Ionization Detector, Wanfang Li

Theses

A thermionic ionization detector (TID) consists of a catalytically active, low work function heated source. It responds to molecules with high electron affinity which can extract electrons from the surface of the source to form negative ions. TID has been used as selective detectors for nitrogen and phosphorous compounds (NPD). In this research, a TID has been used for selective detection of oxygenated volatile organic compounds (VOCs). The response of the TID to different oxygenated and chlorinated VOCs compounds was studied. To evaluated its performance, the analysis was done using a FID in parallel with the TID. For most of …

Fast Adaptive Algorithms For Signal Separation, Robert A. Manzo

Theses

LMS and RLS type algorithms are suggested for decorrelation of multi-channel systems outputs. These algorithms act as signal separators when applied to unknown linear combinations of the inputs. The performance of the suggested algorithms is compared with that of the conventional LMS and RLS algorithms that minimize the mean square error. It. is shown that the correlation matrix eigenvalue spread associated with the LMS decorrelator is always smaller than the eigenvalue spread corresponding to the conventional LMS. resulting in faster convergence speed for the decorrelator. A new RLS type decorrelator algorithm is suggested. The RLS decorrelator is shown to be …

Parallel Exact Enumeration Of Self-Avoiding Walk On Cubic Lattices And Its Applications To Protein Folding Studies, Anek Vorapanya

Theses

Exact enumeration of self-avoiding walk on many lattices have been studied extensively recently. Even a short chain polymer (about 30 monomers) represented as a chain of cubic lattice sites requires a considerable amount of computer time to exhaustively search for all unique conformations. However, self-avoiding walk process can be modified such that it exhibits a high degree of independence among subprocesses. Parallel implementation of such subprocesses can reduce a great amount of enumeration time. Parallel enumeration makes longer chain enumeration possible.

Enumerating only unique conformations requires that all rotation and mirror conformations be removed. An algorithm to avoid generating such …

Interference Cancellation By Time Adjustable Sampling, Josko Zec

Theses

The problem of improving the frequency response of linear arrays is addressed in this thesis. The improvement is measured in the level of rejection of the undesired sources. A new, simple, and practical method is suggested. It is based on adjusting the sampling time in selected channels. Interference cancellation for finite bandwidth signals is accomplished only at, or close to, the carrier frequency. Wideband cancellation requires additional hardware and computational complexity. Conventional way of the wideband interference cancellation utilizes tapped delay line adaptive filters in each channel.

The Time Adjustable Sampling (TAS) method achieves a part of the tapped delay …

Nmr Computer Simulation Of Glassy And Powdered Samples : Application To Studies Of Sodium Borovanadate Glasses, Xian-Quan Zhang

Theses

A computer program is devised to simulate the nuclear magnetic resonance (NMR) spectra observed in powdered and glassy samples in the presence of both nuclear quadrupole and anisotropic chemical shift interactions. This method is performed for the central transition of NMR spectra of nuclei with half-integral spin I. Typical theoretical behavior of the powder pattern is discussed and the "noise" and "error" in the simulated spectra are analyzed. The computer simulation method is applied to the studies of 11B NMR spectra of the sodium borovanadate glass system for which a structural model is presented in the range for which glasses …

Derivation Of Respiration From Electrocardiogram During Heart Rate Variability Studies, Lingeng Zhao

Theses

A method was developed to derive the respiration signal from the ECG signal based on the observation that the body-surface ECG is influenced by electrode motion relative to the heart and that fluctuations in the mean cardiac electrical axis accompany respiration. S-Plus programs were developed to calculate the changes in the value of the mean cardiac electrical axis during respiration from a two lead ECG signal and to generate a continuous ECG-derived respiratory signal from the angle information.

Data were taken from 9 healthy subjects during rest, paced breathing and exercise. The respiration was derived from the recorded ECG signals. …

An Interactive Computer Graphics Based Off-Line Avail Programming Environment For Coordinate Measuring Machines, Nayanesh B. Bhandutia

Theses

Productivity can be increased by providing computer aided off-line program development environment to operate direct computer controlled Coordinate Measuring Machines (CMM). Such an environment not only results in reduced operational downtime of the CMM but also eliminates the need for the operators to learn and debug the complicated CMM programming language.

An application software was developed to provide a computer based graphical environment for on-the-screen CMM inspection simulation and AVAIL part program development. A comprehensive, menu driven front-end was developed as a foundation for this software. Algorithms were designed and coded to read and interpret CAD software part design information …

A Study Of The Biofiltration Process Under Shock-Loading Conditions, Helen Androutsopoulou

Theses

Biofiltration is a new technology for treating airstreams contaminated with emissions of volatile organic compounds (VOCs). It employs porous particles which are placed in reactors, in packed-bed configurations, after appropriate microorganisms have been immobilized on the solid support.

Biofiltration involves complex processes, and is not yet well understood. In this thesis the response of biofilter units to quantitative and qualitative changes in the inlet airstreams was examined. Steady state data were also analyzed through the use of an existing detailed model.

Experiments were performed with two small-scale biofilters, and with ethanol and butanol as model compounds. Each biofilter was dedicated …

The Application Of Stereolithography To The Creation Of Molecular Models Of Amiloride And Its Analogues, Thomas John Busanic

Theses

Stereolithography, a process by which a computer-guided Ultraviolet (UV) laser is applied onto a liquid monomer resin to form a solid polymer, was used to create solid models of amiloride and two of its analogues. The Cartesian coordinates used as input for the orientation of each atom in a molecule were calculated using ab initio molecular orbital theory. Since the structures of the molecules are calculated in this fashion, they represent a more accurate representation of the molecules than that provided by standard molecular modeling kits.

The original purpose of this work was to assist a blind chemist in appreciating …

Solvent Sublation Of Toluene From Aqueous Phase, Mei Chen

Theses

Solvent sublation, a surface chemical technique, was used to remove toluene from aqueous solution into a layer of paraffin oil.

Analytical methods for GC determination of toluene in both gas and aqueous phase were set up. The comparison of solvent sublation and conventional air stripping on toluene removal was carried out. It was found that solvent sublation provides significant improvement over air stripping in removing toluene from water, and reduces toluene emission to the atmosphere. The toluene emissions reduction by solvent sublation are 30%-70% under different conditions. The effects of air flowrates and thickness of organic layer were studied. Increased …

Characterization Of Lightning Induced Voltages On Overhead Power Lines, Wen-Ta Hsiao

Theses

The transient voltage surge caused by lightning is the major source contributed to the disturbance on power systems. The calculation of induced voltages, which is the propagated voltage surge on overhead power lines due to indirect lightning strokes, has been the subject of theoretical and experimental studies. The objective of this research is to develop a comprehensive numerical method to study the induced voltages on an overhead power line caused by a lightning return stroke with arbitrary shapes, for examples inclined lightning, zigzag lightning, etc.

A finite-length lightning channel of any direction in 3-D space has been modelled and closed-form …

Automatic Feature Extraction From Conventional Cad Model To Support Feature-Based Design Approach For The Sheet Metal Stamping Industries, Dipak P. Thakar

Theses

Despite the continuing improvement in computer aided design (CAD) systems and improvements in computer aided manufacturing (CAM), the process planning activity has still not been completely integrated into the CAD/CAM cycle. Particularly in sheet metal stamping industries human interpretation of CAD data is required to extract the geometry and technological information of a component. As a result most CAD systems are used as advanced drafting and drawing management tools by designers. Thus the responsibility for interpreting the design data required for extracting the manufacturing part features still resides with the process planner. Which has increase possibilities of entering errors with …

Extracting Parallelism At Compile-Time Through Dependence Analysis & Cloning Techniques In An Object-Based Paradigm, Binoy Ravindran

Theses

The construct of Abstract Data Type (ADT) modules and Abstract Data Object (ADO) modules supported by most object-based languages are a great source for developing reusable code. To improve the run time performance of such object-based programs, we consider the asynchronous remote procedure call (ARPC) model of parallel execution, in which concurrency is achieved by having the caller and the callee (which are module instances) running on different processors. Frequently, an ADT module is needed simultaneously by other modules, thus causing contention. To resolve this, we clone the module instance in demand and distribute the copies across different processors, so …

3-D Reconstruction And Morphological Analysis Of Normal Rectum, Saritha Sundaresan

Theses

There is no documentation of the 3-D dimensions of normal rectum. We present a method for the architectural and volumetric analysis of the rectum which makes use of a computerized 3-D reconstruction and CT scans of cross-sections of the rectum. The technique is simple, fast, yet potentially reliable. An attempt has been made to calculate the volume, area and average diameter of non-distended rectums (normal). Once we can standardize the technique, then we can study dimensions of the rectum in adult males and females. This thesis constitutes a unified presentation of the essential aspects of the method used in this …

On Issues Of Equalization With The Decorrelation Algorithm : Fast Converging Structures And Finite-Precision, Andrew James Bateman

Theses

To increase the rate of convergence of the blind, adaptive, decision feedback equalizer based on the decorrelation criterion, structures have been proposed which dramatically increase the complexity of the equalizer. The complexity of an algorithm has a direct bearing on the cost of implementing the algorithm in either hardware or software. In this thesis, more computationally efficient structures, based on the fast transversal filter and lattice algorithms, are proposed for the decorrelation algorithm which maintain the high rate of convergence of the more complex algorithms. Furthermore, the performance of the decorrelation algorithm in a finite-precision environment will be studied and …

Motion Synthesis Of Mechanisms Using Constraint Manifolds In Image Space, Yeou-Kai Wu

Dissertations

Kinematic mappings, quaternion algebra, and constraint manifolds in the algebraic image space are applied to the problems of the dimensional synthesis of mechanisms. Dimensions of a mechanism are determined such that a tracer frame fixed on the coupler will pass through or at least as close as possible to the desired positions and orientations in the physical space as the input link rotates about its fixed joint. First, using kinematic mappings, the desired positions and orientations of the tracer frame of the mechanism can be mapped onto points in a hyperspace in which the motion of the tracer frame can …

Aqueous Absorption Of Nitrogen Oxides Induced By Oxychlorine Compounds : A Process Development Study For Flue Gas Treatment, Chen-Lu Yang

Dissertations

The use of chlorine (Cl₂), sodium hypochlorite (NaClO), and sodium chlorite (NaClO₂) as oxidizing agents to promote the absorption of nitric oxide (NO) from gas streams has been investigated in the Gas Scrubbing Laboratory of New Jersey Institute of Technology since 1988. The first step of this project had been to screen out the best scrubbing medium for nitric oxide removal from flue gases. The most successful oxidizing agent was found to be sodium chlorite in acidic aqueous solution. The screening results have been accepted for publication in Chemical Engineering Communications. A sodium chlorite containing aqueous …

An Investigation Of The Formation Of Turbulent Water And Abrasive Water Jets, Md. Ekramul Hasan Khan

Dissertations

This study is concerned with the development of a knowledge base for the selection of nozzle geometry by investigating the mechanism of formation and behaviors of water and abrasive water jets. A numerical prediction of turbulent water flow inside various nozzles is developed. The analysis is based on the numerical solution of conservation equations of continuity and momentum as well as equations of turbulent kinetic energy and dissipation for 2-dimensional axisymmetric flow by using a finite element package, FIDAP.

The technique for determining velocities and forces of water jet and abrasive water jet with the Laser Transit Anemometer and Piezoelectric …

Human Visual System Modelling : Analysis Of Evoked Potential Dynamics, Zongqi Hu

Dissertations

The visual evoked potential (VEP) reflects the electrical activity in the cerebral cortex due to visual stimulation. It contains information on signal processing in the visual pathways from the retina, through the lateral geniculate nucleus (LGN) to the cortical level. Although the VEP is generated by various sources in the multi-layer neural network, the functions of some neuronal mechanisms and the transfer characteristics of particular pathways can be revealed and analyzed by use of carefully designed stimuli (Zemon & Ratliff, 1984; Zemon, Victor & Ratliff, 1986). This dissertation focuses on studies of the visual evoked potential as a composite of …

Design And Implementation Of Fuzzy Logic Controller For A Process Control Application, Sujit S. Nerurkar

Theses

Many industrial applications of fuzzy logic control have been reported. This thesis studies and reports the problems associated with the Heat-exchanger temperature control via conventional PID control implemented with Programmable Logic Controllers (PLC) and provides an example of design and implementation of fuzzy logic controllers (FLC's) for a Heat exchanger in a Water for Injection (WFI) system.

After a basic FLC was designed and tested, it is shown how its rule base evolved to achieve superior performance by utilizing additional low-cost sensing information in the process and its environment. A method for the implementation of FLC's into the existing PLC …

Photoluminescence Study Of Gallium Arsenide, Aluminum Gallium Arsenide, And Gallium Antimonide Thin Films Grown By Metalorganic Chemical Vapor Deposition, John Mark Koons

Theses

The photoluminescence produced by four MOCVD grown epitaxial thin film samples was studied to give insight into sample quality. The four samples under this study were GaAs on a GaAs substrate, Al_.25Ga_.75As on a GaAs substrate, Al_.30Ga_.7OAs on a GaAs substrate, and GaSb on a GaSb substrate. Excitation was achieved through the use of the 514.0 nm line of an argon ion laser, and sample cooling was attained by use of a cryostat cooler using helium gas to attain a low temperature limit of 10°K. The GaAs and Al_.30Ga_{.7O …}

An Integrated Mrp And Finite Scheduling System To Derive Detailed Daily Schedules For A Manufacturing Shop, Sita D. Nathan

Theses

Many companies rely on Material Requirements Planning (MRP) to support their Production Scheduling and Control (PS&C) functions. Since MRP does not provide a detailed shop floor schedule, these users have to implement either a third party procedure or an internally developed procedure for shop floor controls. In this thesis we consider a class of user shops which are characterized by the following features:

• Homogenous machines, that is all machines can produce all products.

• Each product requires a setup, but several products may have a common setup.

• MRP requirements are specified on a weekly basis while actual requirements are specified on …

  ---

  Go to article