Digital Commons Network^™

Synthesis And Characterization Of Silicon Dioxide Thin Films By Plasma Enhances Chemical Vapor Deposition From Diethylsilane And Nitrous Oxide, Lan Chen

Theses

This study is focused on the synthesis and characterization of silicon dioxide thin films deposited on silicon wafers by plasma enhanced chemical vapor deposition(PECVD), using diethylsilane (DES) as a precursor and nitrous oxide (N₂O) as the oxidant. The process parameters, such as temperature, pressure and reactant gas composition have been systematically varied and their effects on the film growth rate and properties were investigated. The growth rate was found to be inversely proportional to the temperature in the examined range of 100-300°C. It increased with increasing N₂O/DES flow rate ratio as the total flow rate increased …

Factors Effecting Calcification Of Bioprosthetic Heart Valves, Sumei Yu

Theses

Calcification is the most frequent cause of clinical dysfunction of glutaraldehyde treated bioprosthetic heart valves. In this study, we compared calcification of bioprostheses of the No-ReactTM and the conventional glutaraldehyde treated pericardium by both in-vivo and in-vitro methods, and to further delineate the role of the host's inflammatory response in implant degeneration.

In the in-vitro study, the two types of pericardial samples were placed in individual polystyrene tubes containing physiological concentrations of calcium and phosphate and incubated for 21 days at 37°C. In the in-vivo study, the two types of pericardial samples were implanted subcutaneously in rats and subsequently retrieved …

Shear Strength And Fatigue Crack Propagation In Concrete By Energy Method, Wei Wang

Dissertations

The limit analysis methods have been commonly used to predict the ultimate flexure strength of reinforced concrete members over 50 years. However, current design formulas for shear in structural concrete are mostly empirical. In part one of this dissertation, attempts are made to apply the theory of plasticity to predict the shear strengths of reinforced concrete structures.

The modified Coulomb-Mohr failure criterion is used as the constitutive law of concrete, and the plastic flow is assumed to be associated with this failure criterion. A generalized formulation for energy dissipation in accordance with the failure criterion and associated flow rule is …

A Nondestructive Method For The Determination Of Fracture Energy In Concrete Structures, Been-Jyh Yu

Dissertations

It is generally believed that linear elastic fracture mechanics concepts can not be employed in determining fracture parameters in concrete, and therefore most of the current research effort has focused on applying the principles in yielding fracture mechanics. Despite all these efforts, comparison of results reported by many investigators indicate wide variations in fracture toughness values even for essentially similar materials. The main source of discrepancy in the observed results is the existence of a large process zone at the crack tip. Hence, the amount of energy consumed in advancing the crack will depend on the size of the process …

Teaching Lower Level Computer Science Courses Via Virtual Classroom And Video : Course Reports By Faculty, Computerized Conferencing & Communications Center, Starr Roxanne Hiltz, Fadi Deek, Maura Deek, James Geller, Ajaz R. Rana

Computerized Conferencing and Communications Center Reports

New Jersey Institute of Technology is the grateful recipient of a generous grant from the Alfred P. Sloan Foundation which has enabled it to explore the use of asynchronous learning networks to create and deliver an entire undergraduate degree program in computer and information science. Each of these courses uses some amount of lecture-type material delivered via videotape. These materials are usually available to students in three different ways: by viewing broadcasts on a New Jersey cable station, by renting the set of videotapes, or by viewing in a special room in the library. Videotapes for distance learning are not …

Mapping Of Portable Parallel Programs, Song Chen

Dissertations

An efficient parallel program designed for a parallel architecture includes a detailed outline of accurate assignments of concurrent computations onto processors, and data transfers onto communication links, such that the overall execution time is minimized. This process may be complex depending on the application task and the target multiprocessor architecture. Furthermore, this process is to be repeated for every different architecture even though the application task may be the same. Consequently, this has a major impact on the ever increasing cost of software development for multiprocessor systems. A remedy for this problem would be to design portable parallel programs which …

Document Preprocessing And Fuzzy Unsupervised Character Classification, Shy-Shyan Chen

Dissertations

This dissertation presents document preprocessing and fuzzy unsupervised character classification for automatically reading daily-received office documents that have complex layout structures, such as multiple columns and mixed-mode contents of texts, graphics and half-tone pictures. First, the block segmentation algorithm is performed based on a simple two-step run-length smoothing to decompose a document into single-mode blocks. Next, the block classification is performed based on the clustering rules to classify each block into one of the types such as text, horizontal or vertical lines, graphics, and pictures. The mean white-to-black transition is shown as an invariance for textual blocks, and is useful …

Composite Beam Analogy Fracture Model (Cbafm) : A Non-Linear Fracture Mechanics Model For Concrete, Mohammed Enamul Haque

Dissertations

The main objective of this dissertation is to develop a simple non-linear fracture mechanics model for the determination of fracture mechanics parameters for concrete, such as fracture process zone length (rp), critical fracture energy release rate (Gic), critical stress intensity factor (KO and fracture energy (GF). The fracture process zone (FPZ) is modeled as a damaged non-elastic cohesive band where the extent of damage due to microcracking varies from no damage at the boundary of FPZ to complete crack surface separation at the notch or macro-crack tip. The proposed method can predict theoretically both the pre-peak and post-peak load versus …

Visual Pattern Recognition Using Neural Networks, Jenlong Moh

Dissertations

Neural networks have been widely studied in a number of fields, such as neural architectures, neurobiology, statistics of neural network and pattern classification. In the field of pattern classification, neural network models are applied on numerous applications, for instance, character recognition, speech recognition, and object recognition. Among these, character recognition is commonly used to illustrate the feature and classification characteristics of neural networks.

In this dissertation, the theoretical foundations of artificial neural networks are first reviewed and existing neural models are studied. The Adaptive Resonance Theory (ART) model is improved to achieve more reasonable classification results. Experiments in applying the …

Nucleus 1995, Always Changing, New Jersey Institute Of Technology

Yearbooks

This is a digitized, downloadable version of the New Jersey Institute of Technology Nucleus.

Biodegradation Of Mixed Wastes : Basic Kinetics And Reaction Engineering For Cyclic Reactor Operation, Kung-Wei Wang

Dissertations

This study dealt with the determination of the detailed kinetics of the biodegradation of mixed substrates by pure cultures, and with reaction engineering studies of bioreactors employed in treatment of substitutable substrates under cyclic operation.

In the first part of the study the degradation of phenol and 4-chlorophenol (4-CP) by two strains of Pseudomonas species was investigated. Strain P. putida 0 was found to be capable of utilizing both phenol and 4-CP as sole carbon and energy sources. This suggests that this strain follows the ortho-cleavage pathway for the aromatic ring. Strain P. putida N could grow on phenol, and …

Dichloromethane Pyrolysis And Oxidation : Formation Of Chlorinated Aromatic Precursors To Pcdd/F, Hong-Ming Chiang

Dissertations

The pyrolysis and oxidation of dichloromethane is studied in a tubular reactor at 1 atmosphere pressure, residence time between 0.3 to 2.0 seconds and in the temperature range 680 - 840°T. Four reactant concentration ratios are:
I. CH₂Cl₂ : Ar =1 : 99 II. CH₂Cl₂ : CH₄ : Ar = 1 : 1:98
III.CH₂Cl₂ : O₂ : Ar = 1:4 : 95 IV. CH₂Cl₂: CH₄ : O₂ Ar = 1: 4: 94

The degradation of dichloromethane, intermediate product formation and decomposition, and final …

Analysis Of The Oxidation Of Isotox By Immobilized Bacteria, Chad Sheng

Theses

The purpose of this work is to show the effects of bio-oxidation of a pesticide through a spiral wound bioreactor using immobilized mixed culture bacteria. The pesticide used for this study is Isotox® and its active ingredients are acephate or O,S-dimethyl acetylphosphoramidothioate and vendex or hexakis (2-methyl-2-phenylpropyI)- distannoxane. Qualitative analysis of the product indicated presence of sulfate.

A consistent and unique DO pattern for Isotox^® showed at least 4 minima, whereas phenol has only one minimum. The consistency of the DO pattern for Isotox^® has been observed for over 30 injections into the bioreactor system. For both an …

Modeling The Fate Of Volatile Organic Compounds In Wastewater Treatment Facilities; Implementation Of Volatilization Models In Envirocad, Vinita Chhahira

Theses

The 1990 Clean Air Act Amendments have identified wastewater treatment facilities as a major source of volatile organic compound (VOC) emissions. VOCs present in wastewater discharges affect the quality of receiving waters, while emissions to the air affect downwind populations. The primary mechanisms involved in VOC removal from a wastewater treatment facility are volatilization and stripping, biodegradation, and sorption to either suspended or biological solids. Although many models have been developed to predict the fate of VOCs in wastewater treatment facilities, no model completely predicts emissions for an entire wastewater treatment facility. The focus of this work is to incorporate …

A Modified Lrt-Based Spread-Spectrum Receiver Using Spatial And Temporal Processing, Jeffrey L. Cutcher

Theses

The problem of demodulating a direct-sequence (DS) spread-spectrum signal in the presence of single-tone or narrow-band interference and multi-path is discussed. A likelihood-ratio test (LRT) receiver is presented which consists of a whitening filter and a RAKE correlator.

A modified LRT receiver structure is then considered where the whitening filter is replaced by an antenna array with corresponding tap coefficients. The array spatially removes the interference by estimating it's angle-of-arrival. Using the array has an advantage over the original LRT receiver when a narrow-band interference is present. Both receivers are identical in performance under the single-tone interference model.

A third …

Hydrodynamic And Water Quality Modeling Of The Whippany River, John E. Krohn

Theses

The Whippany River is located in northern New Jersey and is a major tributary to the Passaic River System. This waterway accepts a wide variety of wastes from the diverse communities within its watershed. These wastes contribute to a rather complex network of biological, chemical and physical interactions.

The purpose of this study is to develop a water quality model using QUAL2E. This model will be used as a tool to simulate the complex interactions that take place within the river system. The river must he considered from physical, biological and chemical perspectives. A successful model can determine current water …

Effects Of Ergonomic Worksite Changes On Risks For Cumulative Trauma Disorders Of The Upper Body In An Assembly And Press Operation Job, David B. Mahone

Theses

Cumulative trauma of the upper body is associated with a variety of individual and job factors. An effort to optimize the human-hardware interface to minimize cumulative trauma is favored. Workers in a set of jobs had complained about hand/wrist and shoulder discomfort. One job was selected for testing alternate machine controls and worksite layout. Electromyography was used to test muscle activity, and photogoniometry was used to measure posture.

For the group of ten worker-subjects, statistically significant decreases in hand/wrist and shoulder muscle activity were found. A marginal, but significant increase in neck muscle activity was also found. When one subject …

Application Of Signal Processing Techniques For Measurement Of Muscle Fiber Conduction Velocity, Satheesh Kumar Swaminathan

Theses

The objectives of this study were to evaluate if muscle fiber conduction velocity (MFCV) could be used as a reliable indicator of fatigue and to characterize the recovery of MFCV after a fatiguing contraction. The decline of MFCV with fatigue was modelled using linear regression and compared with the decline in median frequency (MF). It was found that the percent decline in MF with fatigue was greater than that of MFCV with fatigue and that the decline of MFCV was consistent in all subjects tested. It was thus determined that MFCV could be used as a reliable indicator of fatigue. …

Reducing Rail-Truck Freight Intermodal Drayage Costs, David Moy Jr.

Theses

In rail-truck intermodal transport, a highway truck-trailer or container is moved by truck from a shipper to a rail terminal in the shipper's vicinity, and by rail in line haul between rail terminals. Upon being unloaded at the destination rail terminal, the container is delivered to a receiver (consignee) by truck. The highway portion of the move, or drayage, accounts for a relatively high percentage of total origin to destination cost, and it limits severely the competitiveness of intermodal service with door-to-door truck service. The approach used in this thesis is to examine in detail the current costs and potential …

A Defect Detection Algorithm For Sequential And Parallel Computers, Ralf Hross

Theses

The comparison of images containing a single object of interest, where one of them contains a model object, is frequently used for defect detection/identification. This is often a problem of interest to industrial applications. To make this task more efficient, the implementation on parallel computers should be a major objective. This thesis introduces sequential and parallel versions of an algorithm that compares original(reference) and processed images in the time and frequency domains. The emphasis is on parallel implementation. This comparison may help to detect changes in images. Extracted data is also compared to database data in an attempt to pinpoint …

Effect Of Fiber-Matrix Coupling On The Mechanical Properties Of A Totally Bioabsorbable Composite, Barbaro Jesus Perez

Theses

The mechanical properties of a new class of bioabsorbable polymer-composite based on the amino acid tyrosine and calcium phosphate fibers were studied. The effect of the fiber aspect ratio on the elastic modulus of a discontinuous fiber composite was analyzed using the SMC composite micromechanics computer model. The mechanical stiffness of this polymer was found to be superior to that of poly-p-dioxanone, caprolactone and poly-o-ester.

The fiber surface was modified with methane plasma spray to improve the fiber-matrix coupling. The treated fiber composites had 16-40% higher tensile modulus than the untreated fiber composites. From the flexural test results it is …

A Comparison Of Anhydrous Ethanol Production From Ethylene And From Corn Utilizing Life Cycle Analysis Methodology, Gregory Morse

Theses

There is currently much concern with the impact on the environment due to industrial processes. One method to assess this impact is to perform a Life Cycle Analysis (LCA) on the process. Life Cycle Analysis is made up of three stages; Life Cycle Inventory Analysis, Life Cycle Impact Assessment, and Life Cycle Improvement Assessment. In this study, Life Cycle Inventory Analysis methodology was applied to two industrial processes for producing anhydrous ethanol. The first process is the fermentation of corn, and the second is the hydration of ethylene using water and a catalyst. Each process was first modeled using the …

Micromechanics Of Hot Mix Asphalt Material Formulation And Numerical Simulation, Kuo-Neng G. Chang

Dissertations

Hot Mix Asphalt (HMA), a highway and airfield pavement material, is heterogeneous, granular, and composite. It is traditionally modeled as a homogeneous material using continuum mechanics or semi-empirical methods. As a result, the above models either neglect or over-simply component reactions, failing to predict field performance problems resulting from particle segregation. This research presents micromechanical modeling, a novel approach that accounts for the components.

A micromechanical model is developed for HMA by modeling it as an assembly of asphalt cement coated particles. The asphalt cement is modeled as a viscoelastic material. To represent asphalt cement, several viscoelastic elements (i.e. Maxwell, …

Experimental And Numerical Determination Of Fluid Velocity Profiles And Turbulence Intensity In Mixing Vessels, Chun-Chiao Chou

Dissertations

In this study, both a laser-Doppler velocimeter (LDV) and a computational fluid dynamic (CFD) software package (FL UENI) were used to experimentally determine and numerically predict the velocity distribution of an unbaffled and a baffled mixing vessel. Two types of impellers were employed, namely a flat blade turbine (FBT) and a pitched blade turbine (PBT). These impellers were studied in a single-impeller or multiple-impeller configuration in the unbaffled and baffled vessels. The flow characteristics in the impeller regions were measured by LDV and used as boundary conditions in the numerical computation. Turbulence effects were numerically simulated using either the k-c …

A Petri-Net Based Methodology For Modeling, Simulation, And Control Of Flexible Manufacturing Systems, Venkatesh Kurapati

Dissertations

Global competition has made it necessary for manufacturers to introduce such advanced technologies as flexible and agile manufacturing, intelligent automation, and computer-integrated manufacturing. However, the application extent of these technologies varies from industry to industry and has met various degrees of success. One critical barrier leading to successful implementation of advanced manufacturing systems is the ever-increasing complexity in their modeling, analysis, simulation, and control. The purpose of this work is to introduce a set of Petri net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs). More specifically, this …

Section I: Thermodynamic Properties Of Hydrocarbon Radicals, Peroxy Hydrocarbon And Peroxy Chlorohydrocarbon Molecules And Radicals Section Ii: Kinetics And Reaction Mechanisms For : (1) Chloroform Pyrolysis And Oxidation (2) Benzene And Toluene Oxidation Under Atmospheric Conditions, Tsan-Horng Lay

Dissertations

Alkyl radicals are important active intermediates in gas phase photochemistry and combustion reaction systems. With the exception of a limited number of the most elementary radicals, accurate thermodynamic properties of alkyl radicals are either not available or only rough estimations exist. An H atom Bond Increment approach is developed and a data base [sic] is derived, for accurately estimating thermodynamic properties (ΔH_f°₂₉₈, S°₂₉₈ and Cp(T)) for generic classes of hydrocarbon radical species.

Reactions of alkyl radicals with molecular oxygen are one of the major reaction paths for these radicals in atmospheric photochemistry, oxidation of hydrocarbon …

Robust Approach To Object Recognition Through Fuzzy Clustering And Hough Transform Based Methods, Tianxiong Fu

Dissertations

Object detection from two dimensional intensity images as well as three dimensional range images is considered. The emphasis is on the robust detection of shapes such as cylinders, spheres, cones, and planar surfaces, typically found in mechanical and manufacturing engineering applications. Based on the analyses of different HT methods, a novel method, called the Fast Randomized Hough Transform (FRHT) is proposed. The key idea of FRHT is to divide the original image into multiple regions and apply random sampling method to map data points in the image space into the parameter space or feature space, then obtain the parameters of …

On Adaptive Code Division Multiple Access Detectors, Wenping Chen

Dissertations

Several variations of adaptive CDMA synchronous receiver schemes which can automatically adjust to the system parameters, are studied in this dissertation. Unlike their non-adaptive counterparts, these adaptive detectors require no knowledge of the received signals' energies and have similar or better performance.

Minimum energy and decorrelating criterion are used to update the weights. Since weights are updated according to the changes of the detector's outputs, hence no training sequence is required. The convergences of some of the aforementioned adaptive detectors are also disscussed.

The detectors proposed in this dissertation are near-far resistant,thus rendering the high-precision power control unnecessary. Among them, …

Time Domain And Frequency Domain Analysis Of Myoelectric Signals During Muscle Fatigue, Rakesh M. Maniar

Theses

Spectral analysis of the EMG signal is a useful tool for studying the complex phenomena of fatigue. The spectral parameters of mean frequency and median frequency, and the time domain parameter of root mean square have been used to measure localized fatigue.

The normal values of median frequency and its decline with fatigue have not as yet been determined in healthy subjects. This should be done in order to apply spectral analysis for clinical evaluations of abnormal populations. Normal median frequency values and its slope were established in this work for the upper extremity muscles of biceps, triceps and deltoid …

Scheduling Of Flexible Manufacturing Systems With Automated Guided Vehicles Using Petri Net Models, Hua-Sheng Chiu

Theses

In this thesis, Petri net models for Flexible Manufacturing Systems (EMS) are constructed. A firing sequence of the Petri net from the initial marking to the final marking can be seen as a schedule of the modeled FMS. By using the branch-and-bound algorithm, an optimal schedule of the FMS can be obtained.

Automated Guided Vehicle Systems (AGVS) are increasingly used for material handling in factories and warehouses. An AGVS can reduce labor costs and is ready to be integrated into an automated factory. This thesis presents two AGVS models (shared and duty) which integrate the control of AGVS with the …