Digital Commons Network^™

Acquisition Of Active Multichannel Analysis Of Surface Waves (Masw) Data In Karst Terrain, Ghassan Salem Alsulaimani

Doctoral Dissertations

"This study was designed to verify the effects and data reproducibility when the length of receiver array, receiver spacing, source offset and array orientation parameters are changed for data acquired using multichannel analysis of surface waves (MASW), at intended target depth of 30ft (9m), and to compare the results with electrical resistivity tomography (ERT) data obtained for the same study site.

The MASW data acquired for 34 sites, along four profiles for each site using variable source offsets of 10ft (3m) and 30ft (9.1m), and variable receiver spacings of 2.5ft (0.76m) and 5.0ft (0.76m), concurrently. Out of the 272 profiles …

Local Holomorphic Extension Of Cauchy Riemann Functions, Brijitta Antony

Doctoral Dissertations

"The purpose of this dissertation is to give an analytic disc approach to the CR extension problem. Analytic discs give a very convenient tool for holomorphic extension of CR functions. The type function is introduced and showed how these type functions have direct application to important questions about CR extension. In this dissertation the CR extension theorem is proved for a rigid hypersurface M in C² given by y = (Re ω)^m(Im ω)ⁿ where m and n are non-negative integers. If the type function is identically zero at the origin, then there is no CR extension. …

Investigation Of Hydraulic Fracture Complexity And The Benefits Of Maximizing Or Minimizing Complexity In Unconventional Resources, Rashid Sheikh Kassim

Doctoral Dissertations

"This dissertation discusses two separate, yet inter-related studies. The first study was an extension of historical work comparing transversely fractured versus longitudinally fractured horizontal wells in multiphase flow environment. The second study investigated hydraulic fracture complexities and the benefits of maximizing or minimizing complexities in unconventional resources and tight reservoirs.

The main objective of this research was to investigate fracture complexity and its impact on well performance and economics. To achieve that objective, three different integrated completions and reservoir models were built. Two of the three models, a hybrid reservoir model and micro-seismic based SRV (stimulated reservoir volume) model, were …

Numerical Investigation On Nonlocal Problems With The Fractional Laplacian, Siwei Duo

Doctoral Dissertations

"Nonlocal models have recently become a powerful tool for studying complex systems with long-range interactions or memory effects, which cannot be described properly by the traditional differential equations. So far, different nonlocal (or fractional differential) models have been proposed, among which models with the fractional Laplacian have been well applied. The fractional Laplacian (-Δ)^α/2 represents the infinitesimal generator of a symmetric α-stable Lévy process. It has been used to describe anomalous diffusion, turbulent flows, stochastic dynamics, finance, and many other phenomena. However, the nonlocality of the fractional Laplacian introduces considerable challenges in its mathematical modeling, numerical simulations, and mathematical …

Rock And Fluid Flow Characterization On Unconventional Reservoir Using Confocal-Laser-Microscopy And Micromodels, Songyuan Liu

Doctoral Dissertations

"Unconventional oil reservoirs have become significant sources of petroleum production and have even better potential in the future. Many unconventional oil systems consist of nanoscale pore throats, sub-micro-scale pores and micro-scale fractures that are significantly smaller than those from conventional reservoirs. To understand fluid flow behavior in unconventional reservoir, lab approaches were conducted using lab-on-chip method for the direct visualization of the water/oil flow in sub-micro-scale channels and the flow behavior with influence of surfactant and fractures.

In this work, tight sandstone thin slice was characterized using confocal-laser-microscope. Using designed micromodels, microscopic study of interface and residual oil distribution as …

Repair Of Metallic Components Using Hybrid Manufacturing, Renwei Liu

Doctoral Dissertations

"Many high-performance metal parts users extend the service of these damaged parts by employing repair technology. Hybrid manufacturing, which includes additive manufacturing (AM) and subtractive manufacturing, provides greater build capability, better accuracy, and surface finish for component repair. However, most repair processes still rely on manual operations, which are not satisfactory in terms of time, cost, reliability, and accuracy. This dissertation aims to improve the application of hybrid manufacturing for repairing metallic components by addressing the following three research topics. The first research topic is to investigate and develop an efficient best-fit and shape adaption algorithm for automating 3D models' …

Geophysical Interpretation And Static Reservoir Modeling Of Structurally Complex Reservoir, Rg Oil Field Area, Sirte Basin, Libya, Abdalla A. Abdelnabi

Doctoral Dissertations

"Cambrian-Ordovician and Upper Cretaceous reservoir formations are found in the central western Sirte Basin, the main oil producing region in the Sirte Basin, Libya. As a result of changes in sedimentary environments and structural activities, a number of irregularities in reservoir continuity have developed, which negatively affected the overall performance of the reservoir. Effective simulation of such complex reservoirs can be achieved by integrating geophysical, geological, and petrophysical data to construct a reliable full-field static model, which has the potential to simulate the vertical and lateral variations in the reservoir formations. In this study, 2D and 3D seismic data acquired …

Engineering Advanced Adsorbent Materials For Co₂ Capture Applications, Harshul Thakkar

Doctoral Dissertations

"Global climate change due to the increasing CO₂ concentration in the atmosphere is primarily associated with anthropogenic CO₂ emissions. CO₂ capture technologies using adsorbents have not been implemented commercially due to lack of scalable, practical and cost-effective strategies and are still under development. Moreover, the use of conventional configurations such as pellets and beads for the removal of CO₂ from enclosed environments have been shown to impose limitations to the removal efficiency and system performance. In this dissertation, engineering of advanced and efficient structured adsorbents for practical and scalable CO₂ capture technologies and their use …

Volumetric Error Compensation For 5-Axis Machine Tools, Jennifer Ruth Creamer

Doctoral Dissertations

"This work presents a geometric error compensation method for large 5-axis machine tools. The compensation method presented here uses tool tip measurements recorded throughout the axis space to construct a position-dependent geometric error model that can easily be used for error compensation. The measurements are taken using a laser tracker, permitting rapid error data gathering at most locations in the axis space. First two model types are compared for generating table-based error compensation and experimental results are presented. Table-based compensation is then extended to machine tool controller types with restrictions on the number or combination of compensation tables using an …

Survivability Modeling For Cyber-Physical Systems Subject To Data Corruption, Mark James Woodard

Doctoral Dissertations

"Cyber-physical critical infrastructures are created when traditional physical infrastructure is supplemented with advanced monitoring, control, computing, and communication capability. More intelligent decision support and improved efficacy, dependability, and security are expected. Quantitative models and evaluation methods are required for determining the extent to which a cyber-physical infrastructure improves on its physical predecessors. It is essential that these models reflect both cyber and physical aspects of operation and failure. In this dissertation, we propose quantitative models for dependability attributes, in particular, survivability, of cyber-physical systems. Any malfunction or security breach, whether cyber or physical, that causes the system operation to depart …

Investigation Of Local Velocities And Phase Holdups, And Flow Regimes And Maldistribution Identification In A Trickle Bed Reactor, Mohd Fitri Bin Abdul Rahman

Doctoral Dissertations

"Trickle bed reactors are packed beds of catalyst on which gas and liquid reactants flow concurrently downward. In this work, the experimental work was carried out in 0.14 m diameter Plexiglas column using air-water system flowing over a packed bed of 3 mm glass bead particles. The local liquid and gas velocities, phase saturation and their time series have been investigated for the first time by developing, validating, and implementing a new two-tip optical fiber probe technique. It was found the radially and axially the liquid and gas velocities and their saturation vary and they also vary with times. In …

Application Of Nearly Linear Solvers To Electric Power System Computation, Lisa L. Grant

Doctoral Dissertations

"To meet the future needs of the electric power system, improvements need to be made in the areas of power system algorithms, simulation, and modeling, specifically to achieve a time frame that is useful to industry. If power system time-domain simulations could run in real-time, then system operators would have situational awareness to implement and avoid cascading failures, significantly improving power system reliability. Several power system applications rely on the solution of a very large linear system. As the demands on power systems continue to grow, there is a greater computational complexity involved in solving these large linear systems within …

Processing, Microstructure, And Mechanical Properties Of Zirconium Diboride-Molybdenum Disilicide Ceramics And Dual Composite Architectures, Ryan Joseph Grohsmeyer

Doctoral Dissertations

"This research had two objectives: characterization of processing-microstructure-mechanical property relationships of conventional ZrB₂-MoSi₂ ceramics at room temperature (RT) and 1500⁰C in air, and fabrication of ZrB₂-MoSi₂ dual composite architectures (DCAs) for use near 1500⁰C. Elastic moduli, fracture toughness, and flexure strength were measured at RT and 1500⁰C for 15 ZrB₂-MoSi₂ ceramics hot pressed using fine, medium, or coarse ZrB₂ starting powder with 5-70 vol.% MoSi₂, referred to as FX, MX, and CX respectively where X is the nominal MoSi₂ content. MoSi₂ decomposed during sintering, resulting in …

Fusion Of Non-Visual And Visual Sensors For Human Tracking, Wenchao Jiang

Doctoral Dissertations

"Human tracking is an extensively researched yet still challenging area in the Computer Vision field, with a wide range of applications such as surveillance and healthcare. People may not be successfully tracked with merely the visual information in challenging cases such as long-term occlusion. Thus, we propose to combine information from other sensors with the surveillance cameras to persistently localize and track humans, which is becoming more promising with the pervasiveness of mobile devices such as cellphones, smart watches and smart glasses embedded with all kinds of sensors including accelerometers, gyroscopes, magnetometers, GPS, WiFi modules and so on. In this …

Multi-Objective Combinatorial Optimization Problems In Transportation And Defense Systems, Hadi Farhangi

Doctoral Dissertations

"Multi-objective Optimization problems arise in many applications; hence, solving them efficiently is important for decision makers. A common procedure to solve such problems is to generate the exact set of Pareto efficient solutions. However, if the problem is combinatorial, generating the exact set of Pareto efficient solutions can be challenging. This dissertation is dedicated to Multi-objective Combinatorial Optimization problems and their applications in system of systems architecting and railroad track inspection scheduling. In particular, multi-objective system of systems architecting problems with system flexibility and performance improvement funds have been investigated. Efficient solution methods are proposed and evaluated for not only …

Biomarker Discovery Using Urinary Metabolomics For Noninvasive Early Cancer Detection, Casey Franklin Burton

Doctoral Dissertations

"The development of new screening methods for the early detection of cancer remains one of the foremost challenges facing modern cancer research. The emergence of new analytical technologies and their application to 'omics'-based approaches has provided researchers with powerful new tools for molecular biomarker discovery that may benefit early screening of cancer. This dissertation outlines several key advances made toward the application of urinary metabolomics to cancer biomarker discovery. The term urinary metabolomics here refers to the investigation of small metabolites in urine as potential disease biomarkers. The advantage of using this approach lies in its noninvasive sampling characteristics and …

Mass Transfer Studies In Heavy Oil Recovery Using Solvents, Vijitha Mohan

Doctoral Dissertations

"Heavy oil, sometimes called bitumen, is known for its high viscosity (above 100 cp) and low API gravity (below 22⁰). In most cases, viscosity reduction is needed for the final product. There is a considerable amount of heavy oil in Alberta, Canada and the world's largest heavy oil deposit is in Venezuela. Yet less than 1% of it can be recovered because of its high viscosity. For shallow reservoirs, it is possible to resort to open cast mining. For deeper reservoirs, steam is used at ~ 350 ⁰C which gets the oil viscosity reduced to 1cp, which can now be …

Additive Manufacturing Of Glass Using A Filament Fed Process, Junjie Luo

Doctoral Dissertations

"There are many scientific and engineering applications of glass including optics, communications, electronics, and hermetic seals, there has been minimal research towards the Additive Manufacturing (AM) of transparent glass parts. The special thermal and optical properties of glasses make them hard to be printed using conventional AM techniques. In this dissertation, two different AM techniques for glass AM were developed, Selective Laser Melting (SLM) and filament fed process.

Semi-transparent parts were printed with SLM process. However, the filament fed process was found to be more robust and promising for printing optically transparent glass parts. Therefore, this dissertation is focused on …

Numerical Simulation Of Viscoelastic Buckle Folds: Implications For Stress, Fractures, Porosity And Fluid Flow, Xiaolong Liu

Doctoral Dissertations

"Over the past several decades, buckle folds have been exclusively studied by numerous methods. However, lots of assumptions and simplifications are made, which may not result in realistic in-situ stress conditions leading to rock failure. This study represents the first numerical simulation of folding under the consideration of gravity and pore pressure to simulate the structural development of buckle folds.

The first topic covered in this dissertation is the fracture associated to the single layer fold. It is concluded that burial depth, viscosity, and permeability are critical for the initiation of major fracture sets at the hinge zone with varying …

Environmental Hazard Identification, Assessment And Control For A Sustainable Maritime Transportation System, Lizzette Marie Pérez Lespier

Doctoral Dissertations

"A demand exists to contribute towards the widening awareness of the need for sustainable maritime development and for coordinated maritime policies worldwide. Maritime shipping is considered the most eco-efficient mean of transportation and yet, is responsible for negative environmental impacts.

This dissertation focuses on developing data-driven decision support tools to evaluate the sustainable performance of MTS by focusing on the elements of the MTS that place stress on the environment. The first research contribution is a System Dynamics simulation model that examines the MTS resiliency after an extreme event and determines the sequence needed to restore the ocean-going port to …

Rapid Quantification Of Trypsin Inhibitors In Food And Feed Formulations With Electrospray Ionization Mass Spectrometry, Radheshyam Panta

Doctoral Dissertations

"Presence of anti- nutrients deteriorate the nutritional value of animal foods and feed formulations. The important one being trypsin inhibitors. Trypsin inhibitors in food and feed formulations lower the protein supplement and hence the ultimate consequence is the decrease in growth and development of animals. It is therefore, crucial to monitor trypsin inhibitors in animal food and feed formulations. Research work mentioned in this dissertation is based on the development of rapid, more accurate and robust method for determination of trypsin inhibitor in food and feed formulations. The developed method includes extraction of trypsin inhibitor from food and feed formulation …

Depositional Systems, Sequence Architecture, And Controlling Factors Of An Eocene Stratigraphic Sequence At Minfeng Steep Margin Of Dongying Depression, Eastern China, Zhixin Li

Doctoral Dissertations

“This study is carried out in Minfeng area, the steep margin of Dongying half graben, eastern China, by integrating 3-D seismic, wireline log, and core data, and aims to interpret the depositional systems, reconstruct sequence stratigraphic architecture, and understand the controlling processes and factors at the steep margin of a rift basin. In the first part of this work, an Eocene stratigraphic sequence is divided into three systems tracts, corresponding to different stages of lake evolution, as early expansion (EEST), late expansion-early contraction (LEECST), and late contraction (LCST). EEST is the thickest and diagnostic by the best-developed marginal and basinal …

Retarding Field Energy Analyzer For High Energy Pulsed Electron Beam Measurements, J. Hu, Joshua L. Rovey, W. Zhao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Transformation Of South African Coal Fly Ash Into Zsm-5 Zeolite And Its Application As An Mto Catalyst, Roland Na M. Missengue, Pit Losch, Grant Sedres, Nicholas M. Musyoka, Ojo O. Fatoba, Benoit Louis, Patrick Pale, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

This study presents a way of using South African coal fly ash by extracting metals such as Al and Fe with concentrated sulphuric acid, and then using the solid residue as a feedstock for the synthesis of ZSM-5 zeolite. The percentage of aluminum and iron oxides decreased from 28.0 ± 0.2% and 5.0 ± 0.1% in coal fly ash to 24.6 ± 0.1% and 1.6 ± 0.01% in the acid treated coal fly ash respectively. The fly ash-based zeolite ZSM-5 sample synthesized from the solid residue after extraction of Al and Fe, contained 62% of ZSM-5 zeolite pure phase with …

Decentralized Fault Diagnosis And Prognosis Scheme For Interconnected Nonlinear Discrete-Time Systems, Hasan Ferdowsi, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

This paper deals with the design of a decentralized fault diagnosis and prognosis scheme for interconnected nonlinear discrete-time systems which are modelled as the interconnection of several subsystems. For each subsystem, a local fault detector (LFD) is designed based on the dynamic model of the local subsystem and the local states. Each LFD consists of an observer with an online neural network (NN)-based approximator. The online NN approximators only use local measurements as their inputs, and are always turned on and continuously learn the interconnection as well as possible fault function. A fault is detected by comparing the output of …

Vehicle Base Station, Emad William Saad, J. L. Vian, Matthew A. Vavrina, J. A. Nisbett, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

A system to load and unload material from a vehicle comprises a vehicle base station and an assembly to autonomously load and unload material from the vehicle.

The Error Control Of Mixed-Form Fast Multipole Algorithm Based On The High-Order Multipole Rotation, Ling Ling Meng, Xiaoyan Y.Z. Xiong, Tian Xia, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In this letter, the mixed-form fast multipole algorithm (MF-FMA) with feasible error controllability is implemented through high-order multipole rotation that can make the translation matrices very sparse. The saving of both storage and CPU time makes it attainable to increase the number of harmonics in the middle frequency regime, thus shifting up the transition region of MF-FMA. Consequently, the broadband accuracy of the MF-FMA can be improved significantly.

Low Frequency Behavior Of Cvd Graphene From Dc To 40 Ghz, Rong Wang, Salahuddin Raju, Mansun Chan, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Electromagnetic behaviour of chemical vapor deposition (CVD) graphene at low frequencies is still a mystery. No conclusion is made from the experimental point of views. We systematically investigate the electromagnetic response of graphene at microwave frequencies, which are from direct current (DC) to 40 GHz. Both a coplanar transmission line embedded with different-sized graphene flakes of 48 x 48 and 48 x 240 μm2 and a microwave termination based on the graphene sheet of 6 x 6mm2 are manufactured through standard microfabrication procedures. We conclude that CVD graphene behaves as a frequency-independent surface resistance at the microwave frequencies, which is …

Ultrathin Complementary Metasurface For Orbital Angular Momentum Generation At Microwave Frequencies, Menglin L.N. Chen, Li (Lijun) Jun Jiang, Wei E.I. Sha

Electrical and Computer Engineering Faculty Research & Creative Works

Electromagnetic (EM) waves with helical wave front carry orbital angular momentum (OAM), which is associated with the azimuthal phase of the complex electric field. OAM is a new degree of freedom in EM waves and is promising for channel multiplexing in the communication system. Although the OAM-carrying EM wave attracts more and more attention, the method of OAM generation at microwave frequencies still faces challenges, such as efficiency and simulation time. In this communication, by using the circuit theory and equivalence principle, we build two simplified models, one for a single scatter and one for the whole metasurface to predict …

Volterra Series-Based Time-Domain Macromodeling Of Nonlinear Circuits, Xiaoyan Y.Z. Xiong, Li (Lijun) Jun Jiang, Jose E. Schutt-Aine, Weng Cho Chew

Electrical and Computer Engineering Faculty Research & Creative Works

Volterra series (VS) representation is a powerful mathematical model for nonlinear circuits. However, the difficulties in determining higher order Volterra kernels limited its broader applications. In this paper, a systematic approach that enables a convenient extraction of Volterra kernels from X-parameters is presented. A concise and general representation of the output response due to arbitrary number of input tones is given. The relationship between Volterra kernels and X-parameters is explicitly formulated. An efficient frequency sweep scheme and an output frequency indexing scheme are provided. The least square linear regression method is employed to separate different orders of Volterra kernels at …