Digital Commons Network^™

Exploring Wellbore And Reservoir Temperature Profiles In Fluid Circulation And Production Operations, Ahmed Qasim Al Saedi

Doctoral Dissertations

"The wellbore heat flow occurs during different well operations resulting from any temperature differences between the wellbore fluid and the adjacent formation. Understanding the direction and mechanism of heat flow whether it is conduction or convection help to represent this heat exchange mathematically. However, the only available factor used to understand the heat flow behavior is the measured wellbore temperature which can be obtained from the direct measurement while drilling or circulation operations, well logging, well test, or from the production operations. Also, the initial geothermal formation temperature resulting from the geothermal gradient will help to understand the undistributed formation …

Optimal Adaptive Control Of Time-Delay Dynamical Systems With Known And Uncertain Dynamics, Rohollah Moghadam

Doctoral Dissertations

"Delays are found in many industrial pneumatic and hydraulic systems, and as a result, the performance of the overall closed-loop system deteriorates unless they are explicitly accounted. It is also possible that the dynamics of such systems are uncertain. On the other hand, optimal control of time-delay systems in the presence of known and uncertain dynamics by using state and output feedback is of paramount importance. Therefore, in this research, a suite of novel optimal adaptive control (OAC) techniques are undertaken for linear and nonlinear continuous time-delay systems in the presence of uncertain system dynamics using state and/or output feedback. …

Soil-Water-Energy Nexus Of Green Roofs, Katherine Ann Bartels

Masters Theses

"As the urban landscape continues to sprawl into previously undeveloped land to accommodate population growth, the need to design cities that effectively manage urban stormwater is imperative for a sustainable future. Green roofs use rain-harvesting techniques to reduce urban stormwater discharge while simultaneously providing traditional roof services as well as several ecosystem services. However, green roof media design varies greatly among commercial applications, and little guidance is available to engineers when selecting the media for prospective green roofs. Efforts to maximize stormwater retention and enhance urban heat island mitigation capabilities of green roofs while concurrently reducing nutrient loading were examined …

In-Situ X-Ray Imaging Of The Selective Laser Melting Process, Meelap M. Coday

Masters Theses

"Fusion-based metal additive manufacturing (AM) has garnered much interest in recent decades. Despite the popularity of fusion-based AM technologies such as selective laser melting (SLM), there are still fundamental questions and uncertainties that need to be addressed. In this work, we focus on the understanding of the undercooling in the SLM process and the uncertainties induced by the laser beam size, power, and scan speed. First, we report the estimation of undercooling in the SLM process from the solidification rate measured by in-situ high-speed synchrotron x-ray imaging, based on the dendrite growth velocity model. The undercooling changes as a function …

Shock Wave Propagation Behavior At Corners And Crosscuts In Five Small-Scale Tunnel Scenarios, David Pierre Doucet

Masters Theses

"Shock wave propagation in tunnels and other enclosed environments is substantially more complicated than in an open-air or even a surface detonation. There is still much to learn about how shock wave properties change as a wave propagates in an enclosed space, such as a mine tunnel, inside of a building, or city street. The geometry of the enclosure will have a large role in the propagation of the shock wave. This means that many different tunnel designs must be studied. This work tested five different designs using a modular small-scale model. The scenarios tested were Straight-line, Single Turn, Around …

Serdes Channel Crosstalk Mitigation Methodology With Industrial Implementation Guidance, Junda Wang

Masters Theses

"With the increasing data rate of digital circuits, the differential crosstalk degrades the signal integrity performance in PCBs drastically. Usually, in the trace area, crosstalk can be isolated by stitching vias and adding shielding ground vias can also shield coupling in the ball gate array (BGA) and pin field area. The traditional way to mitigation crosstalk in the BGA and pin field area through adding more ground vias between signal pairs or increasing the spacing in between, it demonstrated us the efficiency on crosstalk cancellation efficiency but it also increases the size of products and it would be contradictory to …

Data Analytics Of Natural Gas Injection Enhanced Oil Recovery For Unconventional Reservoirs, Ali Waqar

Masters Theses

"Unconventional Enhanced Oil recovery, via the injection of natural gas has attracted great attention, as studies and projects have shown to be promising. An overview of pertinent studies has been carried out. Core Scale Laboratory Experiments, Core Scale Simulation, Field Scale simulation and pilot projects are analyzed. Data is collected for Core, Reservoir, Operational, and recovery information. Thereafter, Data analysis techniques are applied to identify data ranges, distributions, trends, relationships, and to eventually reach conclusions.

Huff and Puff injection is the preferred mode of injection, delivering most promising results for unconventional reservoirs. Across all the studies, with increase in amount …

Evaluation Of Eor Potential Of Low Salinity Polymer In Enhancing Heavy Oil Recovery On The Alaska North Slope, Shize Yin

Masters Theses

"Alaska's North Slope (ANS) contains vast amount of viscous oil resources that have not been extracted. This study focuses on the investigation over the potential shown by low-salinity polymer flooding in improving the recovery of ANS heavy oil through laboratory experiments.

At the beginning, coreflooding experiments were performed with silica sandpacks. The synergy between low-salinity water flooding and polymer flooding was proved, and the low-salinity polymer showed a better performance than the normal-salinity polymer. Further, the sandpacks prepared with formation sand from an oilfield on the ANS was then employed so as to simulate the reservoir condition. A series of …

Rhetorical Analysis Of Statements Of Purpose (Sps) For Admission To Graduate School: A Shared-Understanding Perspective Of The Sp Genre, Priyanka Ganguly

Masters Theses

"In this study, I analyzed twenty-four statements of purpose (SPs) submitted to the Department of English and Technical Communication at Missouri University of Science and Technology (Missouri S&T) by current and former students. My goal was to determine the applicants' shared understanding of the SP genre. I analyzed the SPs from three dimensions: rhetorical moves, rhetorical appeals (pisteis), and rhetorical style (elocutio).

To understand the rhetorical moves used by the applicants, I analyzed the content of their SPs according to the categories (moves) and codes (steps) validated in my pilot study. To understand the arguments used by the …

On Predicting Stopping Time Of Human Sequential Decision-Making Using Discounted Satisficing Heuristic, Mounica Devaguptapu

Masters Theses

“Human sequential decision-making involves two essential questions: (i) "what to choose next?", and (ii) "when to stop?". Assuming that the human agents choose an alternative according to their preference order, our goal is to model and learn how human agents choose their stopping time while making sequential decisions. In contrary to traditional assumptions in the literature regarding how humans exhibit satisficing behavior on instantaneous utilities, we assume that humans employ a discounted satisficing heuristic to compute their stopping time, i.e., the human agent stops working if the total accumulated utility goes beyond a dynamic threshold that gets discounted with time. …

Prediction Of Crack Propagation In Zrb₂-Carbon Based Composites Using The Extended Finite Element Method, Leiren Danielle Jarvis

Masters Theses

“The ultra-high temperature ceramic, zirconium diboride (ZrB₂) has long been researched for applications in extreme environments. Its high strength (> 400 MPa) and thermal conductivity (> 100 W/m•K) make it a candidate for use in hypersonic fight, but a low fracture toughness (< 3 MPa•m^1/2) limits this use. In order to increase the fracture toughness without compromising the strength and thermal conductivity, experimental research has focused on the viability of engineered architectures using multiple materials to create a macrostructure. These architectures allow for the increase of fracture toughness thru crack deflection in the material.

Two architectures in particular, …

Influence Of Input Energy On Mechanical Properties Of Laser Powder Bed Fused Aisi 304l Stainless Steel, Tan Pan

Masters Theses

“Powder Bed Fusion process with selective laser melting technique is popularly adopted in additive manufacturing area on account of its layer by layer manufacturing fashion capable of fabricating components with complex internal and external geometries and structures. However, the process-property map is unique and vital for different materials and AM configurations used for fabrication. The process parameter is identified as a significant factor that heavily influences the properties and performances of the printed materials.

Current work aimed to extend the existing knowledge on Laser Powder Bed Fusion fabricated AISI 304L by accessing the influence of varying energy input on the …

Games For Organizational Training: Gamer Motivation Profile And Organizational Training Climate Effect Of Trainee Preference For Gamified Training, Brooke-Nicole Woods Ruffin

Masters Theses

“Gamified training is often utilized in organizations as a way to revamp their training and gain the attention of their employees. However, this training is expensive, and research is needed to help ensure that this training delivery is successful. In this study, first an individual’s gamer motivation profile is compared with learning outcomes that share the same elements. This was completed to determine if the elements that they looked for in playing video games were in alignment with those same elements in training In addition, it was explored whether the preference for participating in video games based on an individual’s …

Comparison Of Reynolds-Averaged Navier-Stokes Turbulence Models For Simulating Boundary Layers In Hypersonic Flows, Jorge-Valentino Kurose Bretzke

Masters Theses

“This study describes the use of Computational Fluid Dynamics (CFD) codes to simulate hypersonic boundary layers using several different turbulent closure models and comparing Reynolds-Averaged Navier-Stokes (RANS) simulations against Direct Numerical Simulations (DNS) of similar test cases. The test cases in this study consist of a flat plate in a Mach 8 freestream with a zero pressure gradient and wall recovery ratio of 0.48, as well as a Mach 8 axisymmetric nozzle also with a cold wall. The RANS models used in this study are the Spalart-Allmaras model, Baldwin-Lomax model, Menter K-Omega Baseline and Menter K-Omega Shear Stress Transport models. …

Determining Variable Depth To Bedrock Using Ert And Masw: A Geophysical Investigation In St. Louis, Mo, Justin James Clinton

Masters Theses

“The research involves a geophysical study in the Maremec River Valley in St. Louis County, Missouri. The geophysical methods described in this paper can provide a relatively quick, inexpensive, and accurate means in investigating the lithologic characteristics of the subsurface. Method selection is ultimately dependent of the type of investigation and site-specific characteristics. In this investigation, Electrical Resistivity Tomography (ERT) data and Mutli-Channel Analysis of Surface Waves (MASW) data were acquired to image the bedrock beneath the Maremec River to an approximate depth of 110 ft or an elevation of 300 ft for a proposed wastewater tunnel. Two overlapping dipole-dipole …

Characterization Of A Plasma Source Simulating Solar Wind Plasma In A Vacuum Chamber, Blake Anthony Folta

Masters Theses

"The United States has set an aggressive time line to not only return to the Moon, but also to establish a sustained human presence. In the Apollo missions dust was a significant factor, but the duration of those missions was short so dust and surface charging were problems, but they did not pose an immediate threat. For a long-term mission, these problems instead become incredibly detrimental. Because of this, research needs to be conducted to investigate these phenomena so that mitigation techniques can be developed and tested. To this end, this thesis serves to demonstrate the Gas and Plasma Dynamics …

The Role Of Tectonic Inheritance, Plate-Reorganization, And Magma Flare-Ups In The Evolution Of The Sevier Orogeny, J. Daniel Quick

Masters Theses

"The temporal and spatial distribution of strain associated with the Sevier Orogeny in western North America is significantly different in the southern end of the belt, at the latitude of Las Vegas, than further to the north at the latitude of Salt Lake City. Until this study, reasons for these differences were speculative as a lack of thrust kinematic data in the intervening region hindered along strike correlation across the belt. A crystallization age of 100.18 ± 14 0.04 Ma was determined for zircons extracted from a recently recognized ash fall tuff near the base of the synorogenic Iron Springs …

The Application Of Machine Learning Models In The Concussion Diagnosis Process, Sujit Subhash

Masters Theses

“Concussions represent a growing health concern and are challenging to diagnose and manage. Roughly four million concussions are diagnosed every year in the United States. Although research into the application of advanced metrics such as neuroimages and blood biomarkers has shown promise, they are yet to be implemented at a clinical level due to cost and reliability concerns. Therefore, concussion diagnosis is still reliant on clinical evaluations of symptoms, balance, and neurocognitive status and function. The lack of a universal threshold on these assessments makes the diagnosis process entirely reliant on a physician’s interpretation of these assessment scores. This study …

Link Between Energy Investment In Biosynthesis And Cellular Resistance To Oxidative Insult: Test The Cost-Quality Hypothesis In Insects, Taiwo Bolanle Iromini

Masters Theses

“The metabolic cost of growth is the amount of energy invested to fuel the anabolic biochemical reactions of biosynthesis. It has been implicated in the efficiency of farm animals and fishes, thus, increased economic profit. The metabolic cost of growth in the cockroach nymph was reported to be 20-fold higher than that of the painted lady butterfly caterpillar. The cost-quality hypothesis was proposed to explain the extremely low biosynthesis energy cost in painted lady caterpillar when physiological and ecological processes the metabolic growth cost was attributed to could not. In this study, the cost-quality hypothesis was tested.

Midgut cells were …

Performance Evaluation Of Alsi10mg Fabricated By A Selective Laser Melting Process, David Michael Murphy

Masters Theses

“Selective laser melting is becoming a widely used additive manufacturing technique that melts metal powder in a layer by layer process in order to build a desired part or geometry. Like many additive processes, selective laser melting allows for fabrication of parts with complex geometries. In order to fabricate a fully dense part there are a number of variables to take into account including: powder characteristics, laser parameters, and environmental parameters. Each of these variables can affect the microstructure and thus the mechanical performance of an additively manufactured part. In this work, the aluminum alloy AlSi10Mg was investigated. AlSi10Mg is …

Mineral Compositions Of Meteorite Samples Alha 77005, Nwa 7397, Nwa 5480, And Ausson: Implications For Geodynamic Processes On Their Parent Bodies And Meteorite Reclassification, Kaylin Agnata Tunnell

Masters Theses

“This study investigates the major, minor, and trace element compositions of minerals from a series of meteorites which represent different stages of planetary evolution including two sample from Mars (ALHA 77005 and NWA 7397), one sample from Vesta (NWA 5480), and one ordinary chondrite (Ausson). The goal of this study is to investigate if petrogenetic tracers commonly employed to understand terrestrial samples can also be applied to extraterrestrial samples. The data presented here show that mineral trace element data allow for novel insight into the magmatic history of meteorite samples. For example, V/Sc and Fe/Mn ratios in olivine provide insight …

Optical Fiber Based Integrity Test Of Civil Engineering Materials: Numerical Analysis, Ruoyu Zhong

Masters Theses

“Major advancement in Civil Engineering cannot be accomplished without the help of sensors. Among different types of sensors, fiber-optic sensor is known for its light weight, high accuracy, resolution, immunity to electromagnetic interference, and resistance to harsh environment. This research mainly focuses on fiber-optic sensor application on concrete structures as temperature sensor. Thermal Integrity Profiling (TIP) is a non-destructive integrity testing method which makes use of the hydration heat from the concrete curing process to detect defects within a drilled shaft. Any defect of concrete could result in a temperature anomaly in a drilled shaft. The accuracy of the current …

Additive Manufacturing Of Linear Shaped Charges To Address Run Up And Run Down Phenomena, Jason Ho

Masters Theses

”A shaped charge is an explosive device used to focus detonation energy in a desired direction. Additive Manufacturing (AM) can allow greater design freedom and geometric complexity for the liner portion of the shaped charge.

In this work, the following hypotheses were tested: 1) Adjusting the initial apex angle of a linear shaped charge liner reduces the amount of run up that occurs, and 2) implementing a backstop at the end of a linear shaped charge liner reduces the amount of run down that occurs.

Linear shaped charge liners with a continuously changing apex angle were created with additive manufacturing. …

Mid-Infrared Chiral Metsurface Coupling With Molecular Vibration, Md Shamim Mahmud

Masters Theses

“The mid-infrared design of chiral metamaterial shows a tremendous absorption capability of infrared rays, and it has the significant application of circular dichroism based device development. Plasmon-phonon coupling is one of the application of metamaterial that provides a new path for tailoring the surface in the nanoscale, which is also applicable in molecules detection. It is possible to change the Plasmon-Phonon coupling strength not only through the chemical change of molecules but also by changing the metamaterial light-matter interaction property. So far, linearly polarized light shows the strong coupling between metamaterial and molecules. However, it is possible to observe strong …

Feasibility Study On Novel Fire-Resistant Coating Materials, Anyou Zhu

Masters Theses

“Over the past decades, wildfires in the United States have caused severe damage and property losses. The California Camp Fire in November 2018 caused 85 civilian fatalities and destroyed 18,793 structures. There is a need to enhance the fire resistance of structures and buildings. The primary purpose of this study was to develop innovative surface-bonded fire-resistant material that can be used as a wall coating with three primary features: (a) workability for application, (b) enough adhesion to the surface of the structure, (c) fire-resistant. This research developed mix designs of innovative fire-resistant coating materials including high-performance cement mortar (HPCM), geopolymer …

Combining Laser Aided Ablation And Polishing To Minimize Surface Roughness Of Additively Manufactured Aluminium Components, Sahil Bipinkumar Patel

Masters Theses

“The surface roughness of additively manufactured parts is much higher than the acceptable range for most applications, thus post-processing is needed to qualify these parts for use. Laser polishing can be used to bring the surface roughness in an admissible range, but if the initial roughness is very high then the energy density for the polishing process needs to be very high to achieve a significant reduction in roughness. This high energy density can produce many process defects. Also, laser polishing alone cannot get rid of high wavelength asperities. Any waviness in the part can be linked with initial waviness …

Catalytic Utilization Of Carbon Dioxide As Renewable Feedstock For Production Of Chemicals And Fuels, Abbas Alaa Jawad

Doctoral Dissertations

"The utilization of CO₂ as a renewable feedstock for producing commodity chemicals and fuels is an interesting challenge to explore new concepts and opportunities in catalysis and industrial chemistry. This sustainable approach not only leads to production of useful chemicals, but also has the potential to mitigate anthropogenic CO₂ emissions to the atmosphere. CO₂ itself is a sustainable and inexhaustibly available carbon source, however, it is inextricably linked to its inherent inertness. It is a thermodynamically stable molecule (ΔG_f = -394.01 kJ.mol^-1) with high oxidation state, hence, reactions of CO₂ must be combined …

Thermodynamic Investigations Of Pure And Blended Cement Mixtures, Jonathan Lapeyre

Doctoral Dissertations

” This research is made up of several studies. The first study focused on understanding the reaction kinetics of Ca₃SiO₅ and metakaolin (MK) mixtures compared to Ca₃SiO₅ and silica fume (SF) mixtures. It was shown that MK was a more effective additive than SF at small replacement levels (i.e. ≥ 10% by mass) while higher replacement levels of MK became a detriment due to excess (Al(OH)₄¯) ions preventing the nucleation and growth of C-S-H. In a follow-up study where the MK particle size distribution (PSD) was modified, similar effects were observed but …

Polymeric Nanoparticle As A New Platform For High Removal Of Endotoxins From Biopharmaceutical Solutions, Sidharth Razdan

Doctoral Dissertations

"Presently, approximately one-third of all biopharmaceutical drugs are derived from biological sources like gram-negative bacteria. Gram-negative bacteria like E.coli are much cheaper to cultivate and provide higher biotherapeutic yield compared to mammalian cells. On extracting the useful biotherapeutics from the gram-negative bacterial cells (E.coli), endotoxin present in the bacteria is released in the surrounding media thus contaminating the lifesaving biotherapeutics. Application of the endotoxin-contaminated therapeutics to humans or animals can cause serious health issues like septic shock, tissue injury and ultimately death. Hence, thorough purification of biotherapeutics before parenteral application is necessary. Although there are multiple methods for …

Characterization Of Neutron Irradiated Accident Tolerant Nuclear Fuel Cladding Silicon Carbide & Radiation Detector Deadtime, Bader Almutairi

Doctoral Dissertations

“In part I, the pulse shape characteristics generated by a Geiger Muller (GM) detector and recorded by an oscilloscope manually, were investigated. The objective of part I was (1) to find a correlation between pulse shape and the operating voltage; and (2) to assess if pulse shape properties followed distinct patterns comparable to detector deadtime findings reported by a previous study. It was observed that (1) there is a strong correlation between pulse shape and operating voltage, and (2) pulse shape falls in three distinct regions similar to detector deadtime. Furthermore, parts II and III are companions and share the …