Digital Commons Network^™

Determination Of The Standard Free Energy Of Formation Of Zr₃S₂, Peter E. Otten

Masters Theses

"The Knudsen effusion method was used to find the equilibrium magnesium pressure for the reaction

3 Zr (s) + 2 MgS (s) = 'Zr₃S₂' (s) + 2 Mg (v)

By using known standard free energy data for the formation of magnesium sulfide and by using the equilibrium magnesium pressure, the standard free energy of formation of Zr₃S₂ was calculated and could be expressed by the equation

Δ F° = -139,800 + 49.13 T cal/mole

in the temperature range 900 to 1100°C.

It was also found that Zr₃S₂ was the zirconium …

An Investigation Of A Constant Velocity Paper Unwinding Device, Jerry L. Gilmore

Masters Theses

"This thesis outlines one approach in designing a system which involves a second order nonlinear differential equation. A large number of variables are involved in this analysis. Therefore, there are many solutions to the problem but only a few of these will satisfy all required conditions. The analysis will be aided by the use of an analog computer. This computer can be manipulated to obtain optimum values for the different variables.

The computer results are presented in graphical form. Reasonable values for the different variables are obtained from these graphs.

The characteristics of the unwinding device were simulated on the …

A Study Of Chemical Stabilization Of The Swell Properties Of Putman Soil, Dale E. Dobson

Masters Theses

"The theory of chemical stabilization of a swelling clay was reviewed. The effect of several chemicals on the engineering properties of Putnam soil was investigated using the Atterberg tests. Strength of concentration of chemical additives versus preferred structural orientation of treated Putnam was investigated using sedimentation procedures similar to those used in the hydrometer analysis of fine grained soil sizes. Swell tests were conducted under a static load of 1.25 psi on untreated Putnam, Putnam in combination with sodium carbonate, and Putnam treated with calcium hydroxide. These tests were conducted at varying initial moisture contents and dry densities.

It was …

The Application Of Quantum-Mechanical Concepts To Biological Systems, Andrew A. Cochran

Masters Theses

"The relation between quantum-mechanical concepts and biological systems is explored by studying the relation of both to the concepts of heat capacity and entropy. It is shown that the most important substances in living matter have extremely low heat capacities and entropies at ordinary temperatures. A critical analysis of the two types of quantum-mechanical interactions between particles and the interactions occurring in low-entropy systems shows that the wave properties of matter are strongly predominant in the chemical elements that constitute 99 percent of living matter. It is concluded that the wave aspects of matter are strongly predominant in biological systems. …

Effects Of Gamma Radiation On Ion Exchange Membranes., John R. C. Roop

Masters Theses

No abstract provided.

The Justification For And Design Of A Lunar Radio Observatory., Thomas Van Doren

Masters Theses

"The purpose of a radio telescope is to record information concerning the strength, spectrum, polarization, and direction of arrival of extraterrestrial electromagnetic radiation at radio frequencies. Earthly based radio observatories are hampered in their attempt to achieve this purpose by atmospheric absorption and reflection of the radiation. A lunar based system would not have this problem because the Moon possesses practically no atmosphere. However, other environmental conditions, such as micrometeorites, high frequency radiation, and extreme temperature variations, must be overcome. This thesis justifies the need for a lunar radio observatory and also describes a particular radio telescope system which should …

The Electrochemical Degradation Of Alkyl Benzene Sulfonate., Melvin David Rickard

Masters Theses

"The ever increasing use of nonbiodegradable synthetic detergents, mainly the alkyl benzene sulfonates, has created difficulties in water and wastewater treatment, and in stream pollution. Although considerable attention has been given to this problem, no solution has been developed which can be effectively employed in the abatement of detergent pollution.

The purpose of this investigation was to determine the feasibility of the use of direct current electrochemical degradation in the removal of alkyl benzene sulfonates (ABS) from water. The rate and degree of completion of the electrochemical reactions were determined, and the nature of the end products formed was investigated. …

Convective Heat Transfer In Small Enclosed Air Spaces., Joseph Charles Kroutil

Masters Theses

No abstract provided.

Missouri School Of Mines Antenna Range Design., Russell Melvin Ousley

Masters Theses

"The problem was to design, construct and evaluate an antenna range which could be used in future research and instructional programs. The basic theory of range design and practical considerations were studied and a range was then designed and built from equipment which was either immediately applicable, applicable after modification or constructed to fit the needs of the range. Tests were made to determine the performance characteristics of the system with respect to the more important design parameters. Suggestions were given for future improvement of operation and expansion of the range capabilities"--Abstract p. ii

Composite Beams In Building Constructions., Mahendrasinhji M. Jhala

Masters Theses

"The use of composite beams is very common in bridge and. in building construction due to the fact that a savings in material is effected.

The study herein shows a simplified procedure for design of composite beams. A number of design charts for rapid selection of a wide-flange section and the necessary cover plates are presented herein. These charts are based on economic sections of steel beams when used in a simple span, if one knows the approximate depth of the beam, slab thickness, allowable stresses in the steel and concrete and live load moment, it is very easy to …

Digital Computer Design Of Compensation For Linear Control Systems, Larry C. Amsler

Masters Theses

"If a control system is to be synthesized, it is inferred that a plant or process is present which must be controlled, and the problem of how to design the control system then arises. The first step is to decide on performance specifications to which the complete system must conform. These specifications may involve such things as the system steady state response, transient response, or frequency response. Any of several synthesis methods may then be applied to complete the system design.

In this study a synthesis method is developed for single-loop linear feedback systems. First, the number of compensating poles …

Some Effects Of Impact Of Low Magnitude On The Deformation Of Prestressed Gypsum Cylinders., Arthur Joe Bush

Masters Theses

"A review of the literature pertaining to the subject is presented. Many series or impacts were made on specimens of gypsum which were already under a static load. A special. repetitive impact machine was used to allow a variety or weights to fall from predetermined heights. Tests were conducted inside a roan constructed especially for these tests. Heat gained or lost through the ceiling and walls was kept at a minilI1um by a lining or aluminum-covered, fiber glass insulation. Temperature and humidity conditions were kept nearly constant by a combination air-conditioner and dehumidifier.

Repetitive loading of the prestressed specimen was …

The Sacajawea Formation And The Darwin Sandstone In The Southeast Wind River Mountains, Wyoming, Denny N. Bearce

Masters Theses

"The area under study is located along the southeast flank of the Wind River Range in Fremont County, Wyoming, Beds overlying the Madison Group are measured and described in six locations within this area. These locations are: Worth Fork Popo Agie River, Sink’s Canyon, Crooked Creek, Canyon Creek, Little Popo Agie River, and Cherry Creek.

Laboratory studies are used as an aid in correlating the sandstone and dolomite sequences described In the six sections. These studies include sieve and heavy mineral analyses and thin section examination.

Sorting factors, obtained from the sieve analyses, and heavy mineral suites indicate that the …

Impulsive Loading Of Metals And Alloys, William Barnes Mclane

Masters Theses

“This thesis deals with the construction of an explosive deformation apparatus. Using the apparatus an investigation was made of the deformation changes in the structure of a 10% uranium-aluminum alloy and a hot rolled high carbon Manganese steel. Also a study of deformation through different thickness of Stainless Steel, Type-304, plates was carried out.

All of the deformations were obtained using a constant explosive charge consisting of a #6 commercial blasting cap coupled with a commercial chemical booster"--Abstract, page ii.

Thermocouple Shape Influence On Response In A Dynamic Compressible Fluid Atmosphere, Philip J. Steger

Masters Theses

"This investigation was performed to determine whether the geometrical shape of a thermocouple used to measure the temperature of a dynamic fluid atmosphere had any affect on its recovery factor and time response.

A converging nozzle was used to establish a dynamic fluid stream in which shaped silver solder junctions of copper-constantan thermocouples were tested. The velocity of the working fluid, air, was about 1000 ft/sec at the test point.

The investigation was successful, within experimental limits, in determining that the recovery factor of a bare thermocouple junction is not influenced by geometrical shape The results agreed substantially with available …

A Study Of The Dissolution Of Titanium-Oxygen-Nitrogen Alloys In Hydrofluoric Acid, Arliss V. Martin

Doctoral Dissertations

"The purpose of this investigation was to study the effect of oxygen and nitrogen (in the alpha solid solution range) on the kinetics and electrochemistry of titanium dissolution in hydrofluoric acid. Dissolution rates, activation energies, difference effects, and potential measurements were determined with TiO_XN_Y sintered alloys and sheet metal. Values of x ranged from 0.01 to 0.126 and values of x. from 0.001 to 0.230.

Dissolution rates were determined using a gas evolution technique. Temperatures were varied from 5 to 45°C. The hydrogen evolution rates were converted to TiO_XN_Y dissolution rates by means of …

The Missouri Miner, December 14, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, December 07, 1962

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, December 1962, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Missouri Miner, November 30, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 16, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 09, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 02, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 26, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 19, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 12, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, October 05, 1962

The Missouri Miner Newspaper

No abstract provided.

Missouri S&T Magazine, October 1962, Miner Alumni Association

Missouri S&T Magazine

No abstract provided.

The Missouri Miner, September 28, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, September 21, 1962

The Missouri Miner Newspaper

No abstract provided.