Digital Commons Network^™

Shear Properties Of An Organic Soil And The Same Soil With The Organic Matter Removed, David Eugene Daniels

Masters Theses

"The effect of strain rate on the shearing properties of an organic A̲ horizon Bryce clay and the same soil treated with hydrogen peroxide to remove the organic matter was studied. For both soils, the pore pressures were found to be independent of strain rate, and dependent only on the increment of strain during shear. The effect of the hydrogen peroxide treatment on the shear properties of an inorganic Bryce B̲ horizon clay was also studied. It was concluded that the hydrogen peroxide does not affect the mineral properties of the Bryce clay and serves only to selectively remove organic …

Phase Equilibrium And Thermodynamic Study Of The Iron-Copper-Carbon System, Krishna Parameswaran

Masters Theses

"Gas carburization experiments were conducted at 950ºC in order to study the phase relations and to determine the activity of carbon in the iron-rich corner of the iron-copper-carbon system. The solubility of graphite in equilibrium with iron-copper alloys was determined at 950º, 1000º, and 1050ºC. The results of gas carburization and graphite solubility experiments at 950ºC were used in constructing an isothermal section of the iron-rich end of the iron-copper-carbon phase diagram, on which are superimposed carbon isoactivity lines. Graphite solubility data at 1000º and 1050ºC were used to construct similar diagrams without the isoactivity lines. The effect of carbon …

A Hybrid Computer Solution Of The Swing Equation, Donald Wayne Shaw

Masters Theses

"Models for the governor and exciter control systems are presented and the development of a hybrid computing system including these models is described. A technique for including the governor and exciter effects into the solution of the power system swing equation is also discussed. A hybrid computing system consisting of an SCC 650 digital computer, hybrid interface, and an EAI-TR-48 analog computer is used to study five test cases. The test cases involve basically the same example system with different values for fault clearing times and machine inertias. The results of each test case are briefly discussed with relevance to …

The Concept And Design Of A Curvilinear Character Generator For Cathode Ray Tube Display Systems, Lawrence Edward Hanebrink Jr.

Masters Theses

"The character generator is the heart of any cathode ray tube display system. The types of generators in common use are the dot matrix generator, the raster scan generator, and the linear stroke generator. Each of these generators produces symbols whose legibility is somewhat compromised. A curvilinear generator is suggested which provides improved appearance and greater legibility. A prototype unit was constructed and the results are compared with the other generators. The curvilinear generator provides the best character resolution and readability of the generator types discussed"--Abstract, page ii.

Advanced Waste Treatment Of Industrial Waste Waters By Physicochemical Processes, Michael Gay Hardie

Masters Theses

"The primary objective of this investigation was to determine the general applicability of using physicochemical processes for treating different types of industrial wastes. Emphasis was placed on the evaluation of the treatment efficiency and the performance difficulties encountered in the treatment of each waste. Two types of waste were studied, one a high strength acidic industrial chemical waste and the other a petroleum refinery waste. The physicochemical system utilized included chemical coagulation and clarification plus activated carbon adsorption. Parallel operations of fixed-bed and expanded-bed carbon adsorbers were conducted. Treatment efficiencies were evaluated in terms of the removals of chemical oxygen …

The Skid Resistance Of Asphaltic Pavements Using Glass Aggregates, Michael Vaughn Korth

Masters Theses

"The disposal of the glass portion of solid waste is an ever-growing problem in the U.S. and recycling has been suggested as a possible solution. In order to find new uses for waste glass, investigations have been conducted to determine if the glass could be used as an aggregate in bituminous concrete mixtures. As part of the overall investigation, this study was concerned with investigating the skid resistance properties of the glass aggregate mixtures, called glasphalt. The objectives were to compare the skid resistance of various bituminous mixtures using aggregate combinations ranging from all glass to all conventional aggregate and …

An Investigation Of A Bistable Oscillator Used In A Phase Modulated Control Circuit, Yu-Fang Yen

Masters Theses

"A primary component in the investigation of phase modulated control systems is bistable oscillator which converts a constant oscillation signal to control the system. The oscillator is feedback type that utilizes a feedback capacitance and resistance in each feedback path to change its frequency. The theoretical behavior of bistable oscillator was investigated and the non-dimensional results were set for convenience in determining the oscillation period. The control circuit which based on the oscillator was also presented a form of suitable circuit for direct application to practical control problems"--Abstract, page ii.

Hydrothermal Alteration Of Ash-Flow Tuffs In The Indian Peak District Of Southwestern Utah, Michael Allan Tolley

Masters Theses

"Careful petrographic study of the ash-flow tuffs in the Indian Peak District of southwestern Utah reveals hydrothermal alteration around the fluorite veins. The alteration minerals themselves and the intensity of alteration vary with distance from the veins. Primary plagioclase has altered to secondary feldspar, calcite, sericite, and traces of epidote and zoisite. Hornblende and biotite have altered to chlorite, calcite, and secondary iron oxide, and traces of epidote and zoisite. Diopside has changed to calcite and secondary iron oxide. An overall picture of the mining district shows that certain minerals increase and others decrease as one nears the veins. Hydrothermal …

Fossil Otoliths Of Some Lower Cenozoic Perciform Fishes Of The Gulf Coast, Mostafa Juma Salem

Masters Theses

"Nineteen perciform species from the lower Cenozoic and one Recent species are described, and included under eight genera. The main characters that were considered as generic are the outline of the sagitta and the structure of the sulcus. The other features of the otolith were regarded as secondary in importance. The characters that were believed to be valuable at specific level are almost the same as those for the genus but in more detail. These species are considered to be within the Suborder Percoidei. The fossil species of "Nemipterus" were put in the Family Nemipteridae as they resembled the Recent …

High Temperature Compressive Creep In Mullite, Peter C. Smith

Masters Theses

"Compressive creep measurements were made on two groups of mullites at temperatures between 1455ºC and 1520ºC. The first group consisted of commercially manufactured mullites. The second group was made up of 7 different mullite compositions spanning the alumina-silica solid solution range from 3Al₂O₃ • 2SiO₂ to 2Al₂O₃ • SiO₂ . Thermal activation energies and stress exponents were calculated for the mullites in the second group. Steady state strain rates taken at 1460ºC under loads of 100 and 110 psi varied between 1.3x10⁻⁴ in/in/hr and 15.4x10⁻⁴ in/in/hr. Activation energies were between 109 Kcal/mole and 204 Kcal/mole. Stress exponents calculated from data …

A Software System For Interactive Man-Machine Design And Analysis Of Electronic Circuits, Leo William Midden

Masters Theses

"The development of an interactive computer-aided circuit analysis program is presented. A graphics terminal is used as an I/O device while an SCC 650 mini-computer is used as peripheral processor. The central processor is an IBM 360/50.

Formulation, capabilities and use of the system are discussed in detail. Close attention is given to user control, making the system both useful and versatile. Both hard and soft copies of all plots and tabular data are available. Provisions are made for error corrections and changes at each step of the input. Parameter values can be altered before and after each analysis.

Additionally, …

Mechanical Properties Of Low Carbon Martensite, Allen L. Affolter

Masters Theses

"Steels of three different compositions were heat treated and tensile tested in order to determine their mechanical properties after heat treatment. All samples had near 0.20 per cent carbon and two manganese levels 0.90 per cent and 1.35 per cent. One group containing the higher manganese level also had small additions of columbium and vanadium. The specimens were too brittle in the as-quenched condition to be loaded to full strength. Maximum strength and ductility were found after short time tempering at low tempering temperatures -- 2 to 15 minutes at 200º to 300ºF. Higher strengths were found at the low …

Practical Application Of Digital Computer To Distribution Systems, Juan Vincente Saavedra

Masters Theses

"Given a three phase ac power distribution system, a digital computer program is presented which determines a complete steady state solution for a given condition. The network data is processed by the computer into an admittance matrix, and these parameters are stored in a manner that enables the computer program to operate upon them as the coefficient of a simultaneous set of nonlinear equations. This set of equations are solved by the Gauss-Seidel Iterative Process improved by a modification of the relaxation method. Practical experience with the distribution system of the Davenport, Iowa, plant of the Aluminum Company of America …

The Artificial Sedimentation Of Soil, John Richard Wagner

Masters Theses

"Previous investigations concerned with artificially sedimented soils and a review of the literature on soil structure are summarized. These studies show that many of the physical properties of a soil depend upon its structure and that the structure of a sedimented soil depends principally upon the salt content of the pore water. In addition, artificially sedimented soils have been shown to have a "natural" soil structure. An apparatus was developed which will automatically sediment soils in water of controlled salt content. To determine whether or not the apparatus was able to sediment uniform and homogeneous soil samples, moisture content determinations, …

Dolomitized Pahasapa Limestone (Mississippian), Northeastern Sector Of The Black Hills, South Dakota, Petrography And Geological Setting, Abdullatif Najjar

Masters Theses

"The carbonates of the Mississippian Pahasapa Limestone in the northeastern sector of the Black Hills outcrops were examined in order to ascertain specific characters of the lithology in this area where the formation is predominantly a dolomite in contrast to adjacent areas where it is mainly a limestone. The Pahasapa seems to be uniform in thickness at the study areas and maintains a thickness of about 550 feet. Because of poor exposures, usually at the base or top, complete sections could not be measured. Much of the Pahasapa consists of coarsely crystalline dolomite containing varying proportions of crinoid plates, gastropods, …

Homogeneous Nucleation Of Water Vapor In Inert Gas Atmospheres, Arthur Henry Biermann

Doctoral Dissertations

"The homogeneous nucleation of water vapor in atmospheres of helium, neon, argon, krypton, and xenon was studied using an expansion type cloud chamber. A strong dependence of the nucleation rate on the particular inert carrier gas was observed. At present the only dependence upon the nature of the carrier gas included in classical nucleation theories is a small factor arising from kinetic considerations which is in the wrong direction to explain the observations. To explain the dependence of the rate on the nature of the carrier gas, a molecular cluster model is assumed allowing inert gas atoms to occupy the …

Low-Energy Electron Transport By The Method Of Discrete Ordinates, David E. Bartine

Doctoral Dissertations

"The one-dimensional discrete ordinates code ANISN has been adapted to simulate the transport of low-energy (on the order of a few MeV) electrons. Two different calculational techniques have been utilized for the treatment of electron-electron collisions that result in a small energy transfer. One method treats such collisions by a continuous slowing-down approximation, while the other method treats these collisions by the use of a very approximate cross section. Calculated results obtained with ANISN are compared with experimental data for the transmitted energy and angular distributions for 1-, 2.5-, 4-, and 8- MeV electrons normally incident on aluminum slabs of …

Internal Friction Of Ion Exchanged Li₂O•Al₂O₃•2sio₂ Glasses, A. Ismail A. Abdel-Latif

Doctoral Dissertations

"Li₂O•Al₂O₂•2SiO₂ glass fibers were ion-exchanged from 1 to 300 minutes in a sodium nitrate bath at 366ºC. The internal friction was measured along with the lithium and sodium concentration profiles. As sodium progressively replaced lithium, the alkali internal friction peak became smaller while a new peak (mixed alkali peak) appeared and increased in magnitude. These changes in the internal friction are similar to those that occur upon the addition of a second alkali to glasses prepared by conventional melting. The magnitude of both internal friction peaks in ion exchanged glasses was dependent on the overall glass composition. The magnitude of …

Noble Gases Anomalies In Terrestrial Ores And Meteorites, B. Srinivasan

Doctoral Dissertations

"Analyses of the content and isotopic composition of xenon and krypton in terrestiral ores containing tellurium, selenium or iodine resulted in the following conclusions: 1. The double beta-decay half-life for ¹³⁰Te is 2.51 x 10²¹ years from analysis of tellurobismuthite from Boliden, Sweden and 2.83 x 10²¹ years from analysis of tellurides from Kalgoorlie, Australia. 2. The ratio of the double beta-decay half-life of ¹²⁸Te relative to that of ¹³⁰Te is ≥ 108 and ≥ 293 for Boliden tellurobismuthite and Kalgoorlie tellurides, respectively. 3. Selenium minerals and tellurium ores containing selenium exhibit ⁸²Kr excess attributed to the double beta-decay of …

Characterizing Topologies By Classes Of Functions And Multifunctions, Alexander Hamlin Cramer

Doctoral Dissertations

"Topological spaces are characterized by the algebraic and topological structures of their classes of continuous selfmaps. The problem of determining the topology of a set given certain classes of multifunctions or relations is considered. The algebraic structure of the upper semicontinuous multifunctions is shown to determine the topology of T₁ spaces. A partial order for classes of topologies for the real numbers is defined and relationships between various classes are established"--Abstract, page ii.

Identification Of Linear Systems With Delay Via A Learning Model, Hugh Francis Spence

Doctoral Dissertations

"The effects of input delay on an identification scheme using a learning model are investigated. The parameter adjustment laws for the learning model are derived through Lyapunov methods similar to those used for the model reference adaptive control systems of Parks. For no measurement noise or delay mismatch between the learning model and system, the parameters are adjusted to bring the error between model and plant to zero. When there is delay mismatch between the inputs of the learning model and the unknown system, the convergence of the parameters of the learning model to those of the unknown system is …

Surface Plasmon-Longitudinal Optical Phonon Contribution To The Reflectivity Of N-Type Insb, William Eugene Anderson

Doctoral Dissertations

"The reflectivity of n-type InSb has been measured in the far infrared. The doping of the samples was such that the free-carrier plasma frequency was near the longitudinal optical phonon frequency. The results suggest that samples with a sufficiently thick damage layer show effects due to surface plasmons. The results also indicate that the surface plasma excitations are coupled to the phonons. A simple model of this coupling is presented which agrees qualitatively with the observed reflectivity. A somewhat more rigorous theory of the coupling is also presented"--Abstract, page ii.

Dynamic Behavior Of Eccentrically Stiffened Plates, Charles Stuart Ferrell

Doctoral Dissertations

"The dynamic behavior of eccentrically stiffened rectangular plates is studied by the finite element method. The addition of stiffeners to a plate structure is a common method of increasing the rigidity of the structure with a minimum of weight increase. However, this stiffened plate configuration does not easily lend itself to analysis. This study is an approach to finding a rational method by which the dynamic behavior of such a stiffened plate structure may be determined. The governing differential equations for the finite element model are derived and the stiffness and mass matrices for the plate and stiffener elements are …

Synthesis, X-Ray Characterization, Structural And Magnetic Studies Of A New Class Of Iso-Structural Bimo₃ Compounds, Joseph Donato Bucci

Doctoral Dissertations

"This dissertation consists of four sections. The first part is a temperature dependent X-ray study of the lattice parameters of BiFeo₃. The synthesis and subsequent X-ray characterization of BiCo₃, BiAlO₃, BiMnO₃ , BiScO₃, BiCo₁₋ₓFeₓO₃ , and BiAl₁₋ₓFeₓO₃ are reported in the second part. These compounds all crystallize in the body centered cubic (BCC) structure with a~10.2Å. Single crystal Precession and Weissenberg photographs confirmed the BCC structure. In part three, the results of the magnetic studies on BiCoO₃ and biAl.₉FE.₁ are presented. The magnetic data for BiCoO₃ are substantiated by X-ray thermal expansion studies. In the last part the compound BiCo.₉FE.₁O₃ …

A Study Of Early-Late Type S0-Pcm Signal Bit Synchronizers, Kuang-Cheng Hu

Masters Theses

"The steady-state phase noise performances of an absolute value type and a squaring loop type of early-late gate S0-PCM signal bit synchronizers are developed using the Fokker-Planck method. The results are compared on the basis of the performance of two configurations with equal loop bandwidth at each input signal-to-noise ratio R_s. The probabilities of bit-detection error of the two configurations are compared. These comparisons are made as a function of R_s. The absolute value type of early-late gate S0-PCM signal bit synchronizater yields better performance than that of the squaring loop type of early-late gate S0-PCM …

Reservoir Design: Simulation Techniques, Larry W. Mays

Masters Theses

"A simulation model is developed to aid in the analysis of small dams to reduce the possibility of inadequate spillway designs. Basic assumptions concerning the geometric aspects of the natural reservoir are made to develop the model which is based upon describing the timing and magnitude of a design flood passing through a reservoir. Simulation equations are derived from the basic continuity equation and describe reservoir outflow and storage as functions of reservoir depth. Newton's Iteration Technique is utilized to solve the simulation equations for the reservoir depth. The resulting simulation model determines an optimum size auxiliary spillway having a …

An Energy Solution For Vibration Characteristics Of Free Thin Cylinders, Dale Elmer Leanhardt

Masters Theses

"In this report the flexural vibrations of the walls of free, thin, circular cylinders are considered. Theoretical expressions are developed for the natural frequencies by extending the approximate energy method of Arnold and Warburton to the free-free case. Furthermore, the developed expressions are shown to apply, as special cases, to the fixed-fixed and simply-supported cylinders analyzed by Arnold and Warburton. The energy solution for free-free cylinders is checked both experimentally using a 3500 pound-force, 5 to 2000 hertz, vibration exciter and numerically using the well documented SABOR IV-DYNAL finite element program. While the derived energy method accounts for any prescribed …

Sediment Properties And Depositional Environment Of The Minnelusa Formation (Permo-Pennsylvanian), Northern Black Hills, South Dakota And Wyoming, El-Magtuf Taleb Taleb

Masters Theses

"Permo-Pennsylvanian sedimentary rocks of the Minnelusa Formation of the Black Hills uplift, South Dakota and Wyoming, can be divided into upper, middle and lower divisions on the basis of lithology. The upper portion of 150 to 200 feet consists of gray and yellow sandstone, with some carbonates and shales in some sections. The middle portion, about 200 to 220 feet thick consists of gray and red sandstone with carbonate members including the prominent dolomite member at the base; some of the carbonates are cherty. The lower portion, 20 to 60 feet thick, consists of pink sandstone, arenaceous dolomite and thin …

Calculation Of Eddy Current Loss Of A Disc, Kou Quen Chang

Masters Theses

"A method is presented to calculate the eddy current losses of a uniform disc with an opening in the center and excited by a circular current loopage First, the disc is subdivided into smaller concentric rings, then the self-inductances, the mutual inductances between these smaller rings, the mutual inductances between the excitation coil and the smaller rings, and the resistance of the rings are calculated. Next, the eddy current flowing in each ring is obtained by solving a complex matrix equation of the form [X] [I] = [V] where X is the impedance matrix, I is the eddy current matrix, …

Factors Affecting The Ductility And Microstructure Of Ti-6al-6v-2sn Titanium Alloy Weldments, Michael John Ball

Masters Theses

"The purpose of the investigation was to study the effect of material thickness, weld heat input and post weld heat treatment on the tensile properties and microstructure of Ti-6Al-6V-2Sn Titanium, and obtain a practical weld/thermal treatment cycle. The objectives were accomplished by electron beam and gas tungsten arc welding 0.060, 0.125 and 0.250 inch thick material and then heat treating at various temperatures and times. Electron beam and gas tungsten arc welding enabled an approximate 4:1 ratio of heat inputs to be utilized. Resultant welded and heat treated material was tensile tested and metallographically examined. Heat treatments involved both air …