Digital Commons Network^™

A Metallurgical Evaluation Of The Mi Vida Prospect: A Mixed Copper Sulfide-Carbonate Ore Body, Sells, Pima County, Arizona, Kevin Michael Kenney

Masters Theses

"A copper-prospect in south-central Arizona has been evaluated on a metallurgical basis. Primary chalcocite and secondary covellite, plus the copper oxides malachite and brochantite, constitute the economic mineralization. The deposit outcrops as a steeply dipping (70°SW), intensely brecciated, copper-bearing quartz vein with discontinuous lenticular ore shoots.

Acid leaching techniques alone and in conjunction with froth flotation utilizing four copper oxide specific collectors were used to evaluate the amenability of this ore to processing. Direct acid leaching was examined and found to be ineffective. Removal of the chalcocite by froth flotation with xanthate was easy and gave better results to subsequent …

Nonlinear Anelasticity And The Martensitic Transformation, Manfred Wuttig, Tetsuro Suzuki

Materials Science and Engineering Faculty Research & Creative Works

Zener's model of a standard linear solid is extended to include nonlinearities characteristic of metals and alloys in the vicinity of a martensitic transformation. The equation of motion of a nonlinear anelastic solid is derived and solved using van der Pol's method. The characteristics of the solutions indicate that auto-oscillations of finite amplitude can be excited externally. It is proposed that the streaming oscillations represent the beat between the external excitation and the auto-oscillation. © 1979.

Film Boiling Of Freon 113, Normal Pentane, Cyclopentane And Benzene From Cylindrical Surfaces At Moderate Pressures, G. J. Capone, Efton Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

An investigation of film boiling heat transfer in saturated pools of liquid Freon 113, normal pentane, cyclopentane and benzene was conducted. The fluids were boiled from copper, cylindrical heat transfer surfaces 0.0762m (3 in) long, and 0.01397,0.01905 and 0.0254m (0.55,0.75 and 1.0 in) in diameter. The data covers a moderate range of pressures up to 1.67 (10)6 N/m2 (242.5 psia). The experimental data are compared with existing film boiling correlations. The existing film boiling correlations were found to be inadequate in predicting heat-transfer coefficients for the conditions of this investigation. © 1979.

Motion‐Compensated Transform Coding, A. N. Netravali, J. A. Stuller

Electrical and Computer Engineering Faculty Research & Creative Works

Interframe Hybrid Transform/dpcm Coders Encode Television Signals by Taking a Spatial Transform of a Block of Picture Elements in a Frame and Predictively Coding the Resulting Coefficients using the Corresponding Coefficients of the Spatial Block at the Same Location in the Previous Frame. These Coders Can Be Made More Efficient for Scenes Containing Objects in Translational Motion by First Estimating the Translational Displacement of Objects and Then using Coefficients of a Spatially Displaced Block in the Previous Frame for Prediction. This Paper Presents Simulation Results for Such Motion‐compensated Transform Coders using Two Algorithms for Estimating Displacements. the First Algorithm, Which …

Reduction Of Transmission Error Propagation In Adaptively Predicted, Dpcm Encoded Pictures, N. F. Maxemchuk, J. A. Stuller

Electrical and Computer Engineering Faculty Research & Creative Works

A New Technique for Reducing Transmission Error Propagation in Adaptively Predicted, dpcm‐encoded Pictures is Described. the Basis for the Technique is a Generalization of the Notion of Predictor Output Attenuation, Described by Graham, to Include Attenuation of the Adaptive Prediction Function. Simulation Results Are Presented that Show that Application of the Technique to Graham's Codec Results in Significant Reduction in Error Propagation Without Degradation of Picture Quality. the Technique Requires No Increase in Transmission Rate. © 1979 the Bell System Technical Journal

Toward More Meaningful Laboratory Experiences In Digital Signal Processing And Digital Control, Rodger E. Ziemer, D. Ronald Fannin, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

Digital Signal Processing and Digital Control Are of Utmost Importance for Electrical Engineering Students, for They Are Present in Many Aspects of Today's Technical World. Complex Topics Like These Should Not Be Introduced into a Curriculum as a Crash Program but Taken as Steps in an Evolutionary Process. a Successful Example of This Evolutionary Process is Well Underway at the University of Missouri-Rolla. Copyright © 1979 by the Institute of Electrical and Electronics Engineers, Inc.

Phase 1 Inspection Report: National Dam Safety Program. Missouri - Kansas City Basin. Binder Lake Dam, Cole County, Missouri, Hoskins-Western-Sonderegger, Inc. Consulting Engineers, Lincoln, Nebraska

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of the Binder Lake Dam.

It was prepared under the National Program of Inspection of Non-Federal Dams.

This dam has been classified as unsafe, non-emergency by the St. Louis District as a result of the application of the following criteria:
1) Spillway will not pass the Probable Maximum Flood.
2) Overtopping could result in dam failure.
3) Dam failure significantly increases the hazard to loss of life downstream.

A Simple Experiment Illustrating The Structure Of Association Colloids, Stig Friberg, Beverly Bendiksen

Chemistry Faculty Research & Creative Works

No abstract provided.

Recovery Of Lead From Lead Smelter Mattes, Cheng-Ping Chang

Masters Theses

"A by-product of lead smelting is a matte which consists mostly of lead and copper sulfides. Experiments were conducted to determine the feasibility of removing lead from molten matte by adding iron as a reducing agent. The effectiveness of iron at 1000 and 1100°C was a function of matte composition, but not of temperature except near iron saturation. The lead content of matte could be decreased to as low as 9.0 to 11.6 wt pct (2.3 to 3.0 at. pct) at 1000°C, depending on composition. The effect of oxygen in the matte on lead recovery from iron-saturated mattes was also …

Development Of Impervious Low Thermal Expansion Petalite Bodies, Suchinda Chotipanich

Masters Theses

"Impervious petalite bodies were formulated from petalite, lithium aluminosilicate frit and kaolin. Thermal expansion coefficients for selected bodies were less than 2 x 10⁻⁶ /°C(20 - 600 °C). Mineralogy and the reactions in systems containing petalite, lithium aluminosilicate frit and kaolin were observed. Silica-poor high quartz solid solution was found to be the reaction product formed from the reaction between frit and kaolin before conversion to ß-spodumene solid solution at higher temperatures. The crystallization of the ß-spodumene solid solution phases in this system did not occur at the same temperature resulting in variation in the size of the crystallites. The …

Geology And Mineralization, Ohio And Mt. Baldy Districts, Marysvale, Piute County, Utah, Laurence M. Nuelle

Masters Theses

"The Ohio and Mt. Baldy Mining Districts near Marysvale, Utah occupy a cauldron complex in the Bullion Canyon Volcanics. This complex contains three rock groups of three volcanic episodes. The oldest is a volcanic cone framework series of lahars. The middle group is represented by lava flows, ash flows, and breccias which represent intra-caldera fill. The upper group consists of a local vent complex and the Delano Peak Tuff Member both of which may be related to ring fracture activity.

The stages of veining in the area include in order of gradational deposition: (1) early quartz veins, (2) pre-productive main …

Pelletizing Of A Lead Sinter Machine Feed, Hung-Yang Tsai

Masters Theses

"A typical lead sinter machine feed can be pelletized in a drum pelletizer using tap water as a binding liquid. The green pellets produced have return sinter as cores, and an outer layer of new material and fluxes. The moisture content of the pellets produced is about 5%. The pelletizing procedure developed used raw materials from the Amax Lead Smelter, with only a minor amount of feed preparation. The importance of proper moisture control, use of binders, method of adding moisture, speed of pelletizing drum, etc. were investigated. The stability of pellets under extreme storage conditions was also determined"--page ii.

A Planning System For Research Management In A University Environment, Russell Lee Goldammer

Masters Theses

"The research project director at a college or university has few, if any, of the traditional management tools that are available for other forms of management, especially in performing the early, crucial stages of planning. This is particularly distressing since managing a program in this type of environment can be very difficult, due to bureaucratic red tape and interdepartmental concerns. The purpose here is to develop an aid for managers with these problems, for more effective research management in a university environment.

After developing a general model for a typical research project at a university, the Gasification Research On Wood …

Boehmite-Bonded High-Alumina Refractories, Gerhard H. Schiroky

Masters Theses

"High-alumina refractories (99+ % Al₂O₃) were produced by pressing a mixture of 70% tabular alumina and 30% reactive alumina and autoclaving in saturated steam at 1.4 MPa (200 psia)/194 °C to 3.4 MPa (500 psia)/242 °C for 12 to 96 h. Autoclaving converted the reactive alumina to boehmite which acted as the bond phase. At room temperature the MOR ranged up to 37 MPa depending upon boehmite content. The hot-MOR decreased steadily with increasing temperature, but was still 8 MPa at 1400 °C which exceeds that of comparable cement-bonded or conventionally fired high-alumina refractories. The estimated autoclaving costs are lower …

Dissociative Excitation Of Hgbr2 In Collisions With A Beam Of Metastable Nitrogen, D. W. Fahey, Laird D. Schearer

Physics Faculty Research & Creative Works

No abstract provided.

Alignment Of Ions In Penning Collisions, D. W. Fahey, Laird D. Schearer, William F. Parks

Physics Faculty Research & Creative Works

The authors have observed the alignment of the 5p P322 state of strontium ions produced in Penning collisions between an unpolarized beam of helium metastable atoms and a strontium vapor target. The alignment is shown by a linear polarization of the optical emission from the excited ion. For a 66-meV beam of helium metastable atoms a 3.5% linear polarization of the emission relative to the beam axis was measured. It is shown how the alignment may be used to determine the probabilities for populating the various final Quasi molecular states of the ion-atom pair. The alignment of the Penning ions …

Negative Ion Production Rates In Rare Gas-Halide Lasers, Kaare J. Nygaard, Howard L. Brooks, Scott R. Hunter

Physics Faculty Research & Creative Works

This paper reports on dissociative electron attachment in F2, NF3, Cl2, and I2. The principle of the method is to produce a short burst of photoelectrons from a photocathode by means of light from an argon-fluoride laser. Subsequently, by studying the motion of electrons and negative ions in a constant electric field (E) region, information is obtained about drift velocities and effective attachment cross sections. Helium, argon, and nitrogen were used as buffer gases. Of particular interest is a very strong temperature dependence of the attachment coefficient in I2. Measurements were taken from 35 to 110°C, covering an E/N range …

The Oguchi-Kaneyoshi Method For Spin-Glasses, M. Jursich, Harry A. Brown

Physics Faculty Research & Creative Works

The results of an effective field calculation of the phase diagram and order parameters for a random exchange Ising model are presented. This calculation was based on an exchange coupled pair instead of the single-spin molecular-field theory. This approach should be an improvement over the infinite-ranged models because it includes localized effects. The results indicate that the local disorder effects are especially important at low temperatures. © 1979, THE PHYSICAL SOCIETY OF JAPAN. All rights reserved.

Precision Doubly Differential Cross Section Measurements, John T. Park

Physics Faculty Research & Creative Works

Ion Energy Loss Spectrometry has been applied to the measurement of cross sections differential in both scattering angle and ion energy loss. Differential cross sections obtained for excitation of the n=2 level of atomic hydrogen by various ions provides unexpectedly good agreement with the available theories. Copyright © 1978 by The Institute of Electrical and Electronics Engineers, Inc.

Temperature Dependence Of The Electron Attachment Coefficient In Iodine, Howard L. Brooks, Scott R. Hunter, Kaare J. Nygaard

Physics Faculty Research & Creative Works

The attachment coefficient for iodine in a (1% I2+99% N 2) mixture, 50 Torr total pressure, has been measured in an electron swarm experiment from 1 to 50 Townsends (1 Townsend=1Td=10-17 V cm2). As the temperature was increased from 35 to 110°C, the attachment coefficient increased for any E/N (electric field intensity/gas number density) values greater than 7 Td. These results are compared to other experimental data and an explanation for the temperature dependence, based on the population of upper vibrational states, is presented. © 1979 American Institute of Physics.

Transform Domain Motion Estimation, J. A. Stuller, A. N. Netravali

Electrical and Computer Engineering Faculty Research & Creative Works

This Paper Introduces an Algorithm for Estimating the Displacement of Moving Objects in a Television Scene from Spatial Transform Coefficients of Successive Frames. the Algorithm Works Recursively in Such a Way that the Displacement Estimates Are Updated from Coefficient to Coefficient. a Promising Application of This Algorithm is in Motion‐compensated Interframe Hybrid Transform‐dpcm Image Coding. We Give a Statistical Analysis of the Transform Domain Displacement Estimation Algorithm and Prove its Convergence under Certain Realistic Conditions. an Analytical Derivation is Presented that Gives Sufficient Conditions for the Rate of Convergence of the Algorithm to Be Independent of the Transform Type. This …

An Adaptive Intraframe Dpcm Codec Based Upon Nonstationary Image Model, N. F. Maxemchuk, J. A. Stuller

Electrical and Computer Engineering Faculty Research & Creative Works

This Paper Introduces a Nonstationary Model for Images and Develops an Adaptive Intrafield Dpcm Codec based Upon the Model. the Codec Attempts to Minimize the Mean‐square Coding Error at Each Sample Point in the Picture. the Quantizer in the Resulting Adaptive Codec is Found to Be Similar to that Previously Obtained from Visual Masking Considerations. Comparative Simulation Results using 256 X 256 Pixel Rasters Are Given for Two‐ and Three‐bit/pixel Versions of the Adaptive Codec, the Three‐bit/pixel Graham Codec, and Three‐bit/pixel Previous Element Dpcm. © 1979 the Bell System Technical Journal

A Microcomputer-Based Data Acquisition System With Hardware Capabilities To Calculate A Fast Fourier Transform, R. A. Kobylinski, Rodger E. Ziemer, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

The Fast Fourier Transform (FFT) Has in Recent Years Become an Important Tool to the Engineer. There Are a Number of Algorithms Which Calculate the FFT. One Such Algorithm is the Cooley-Tukey FFT Algorithm (Radix-2) Which Lends itself Rather Easily to a Combination Software and Hardware Implementation. with a Microcomputer as the Controller of a Data Acquisition Module and Hardware Which Computes the Butterfly Associated with the FFT Algorithm, the FFT Can Be Calculated Efficiently. © 1979 IEEE

Backscatter Inversion In Spherically Asymmetric Ionosphere, R. (Richard) E. Dubroff, N. Narayana Rao, K. C. Yeh

Electrical and Computer Engineering Faculty Research & Creative Works

It is Well Known that Various Diurnal and Morphological Features of the Ionosphere Reveal Substantial Departures from the Normally Simplified Assumption of Spherical Symmetry at Certain Times of the Day or at Certain Geographic Locations. a Radio Ray Passing through Such an Ionosphere Must Bear Information About its Horizontal Gradients. the Leading Edge of a Backscatter Ionogram is Formed by Obliquely Propagated Radio Rays of Minimum Time Delay and Hence is Useful in Deducing Information About the Ionospheric Horizontal Gradients. in This Regard, the Ionospheric Electron Density Distribution is Modeled by a Locally Quasi‐parabolic Layer with Six Parameters. This Six‐parameter …

The Rollamo 1979, University Of Missouri - Rolla

Yearbooks

No abstract provided.

Nucleation Experiments With Monodisperse Nacl Aerosols., Darryl J. Alofs, M. B. Trueblood, D. R. White, V. L. Behr

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nucleation Experiments with Monodisperse NaCl Aerosols Showed Good Agreement with the Kohler Theory Relating the Critical Super-Saturation S//c to the Dry Size. Aerosols Produced by Condensing NaCl Showed the Same S//c as Those Produced by Evaporating Aqueous NaCl Solution Droplets. This Indicates that If There is an Energy Barrier in Going from a Dry NaCl Particle to a Solution Droplet, This Energy Barrier is Small. the Fact that the Evaporation Aerosol Particles Are Cubical Crystals and the Condensation Aerosols Are Amorphous Spheres is Shown to Make No Difference in the Nucleation Threshold. the Investigation Also Gives Insights into the Performance …

Two-Dimensional Scattering From A Medium Of Finite Thickness, Dwight C. Look

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Split-Set Rock Bolt Analysis, Robert L. Davis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A system of twelve equations have been developed for the elastic-plastic analysis of split-set roof bolts and these equations have been programmed for solution on the IBM 370/168 computer. Typical solutions have been presented in graphical form for comparison with experimental data. The results compare favorably for most of the split-sets providing the system parameters are properly specified. It appears that this analytical solution will be valuable to mining engineers since the solutions have been put in graphical form. Plots of the effects of the various parameters (material strength, material strain-hardening, friction, thickness, radius, angle of contact) on the holding …

Plasma Polymerization Of Tetrafluoroethylene. Ii. Capacitive Radio Frequency Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley

Chemical and Biochemical Engineering Faculty Research & Creative Works

The plasma polymerization of tetrafluoroethylene (TFE) is studied in a capacitively coupled system with internal electrodes using radio frequency (13.56 MHz) power. The emphasis is on identifying conditions that are compatible with continuous coating of plasma polymer on a substrate moving through the center of the interelectrode gap. At high pressure (500 mTorr), deposition of plasma polymer is primarily on the electrodes rather than on a substrate placed midway between electrodes. Glow is observed in only part of the interelectrode gap at low powers and fills the gap only at high power levels. The use of a magnetic field effects …

Transport Of Oils As Oil-In-Water Emulsions, J. L. Zakin, R. Pinaire, M. E. Borgmeyer

Chemical and Biochemical Engineering Faculty Research & Creative Works

Turbulent flow pressure drop measurements were made for various concentrated oil-in-water emulsions which exhibit non-Newtonian behavior. The effects of oil viscosity, temperature and oil concentration on specific energy loss were evaluated. Measured turbulent friction factors consistently fell below those predicted by the Dodge and Metzner friction factor correlation, probably due to viscoelastic effects of the emulsion. Several polymer and surfactant drag reducers were tested in these emulsions, and high molecular weight polyacrylamides were found to be the most effective in further reducing pumping energy losses. The effectiveness of the polymer additives decreased with time during pump circulation. © 1979 by …