Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 22021 - 22050 of 33701

Full-Text Articles in Entire DC Network

Study On The Load-Bearing Capacity Of Cold-Formed Sigma Purlins, Markku Laine, Pentti Makelainen Oct 1994

Study On The Load-Bearing Capacity Of Cold-Formed Sigma Purlins, Markku Laine, Pentti Makelainen

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Experimental investigations conducted on the structural behaviour and ultimate load carrying capacity of cold-formed sigma purlins are reported. Three different purlin systems, i.e. the double spanning, the sleeved and the overlap system, were investigated. In addition to the full- scale tests on 2-span purlin - sheeting system with screw fastening and with continuous, sleeved and overlapped central supports, tests on single span purlins were also conducted for finding out bending moment and shear capacity values at the central support of a multiple span sigma purlin. Analytical considerations for modelling the cross-sectional behaviour of the sigma purlin itself and the local …

Go to article

Perforated Webs Subjected To End-One-Flange Loading, Roger A. Laboube, James E. Langan, Wei-Wen Yu Oct 1994

Perforated Webs Subjected To End-One-Flange Loading, Roger A. Laboube, James E. Langan, Wei-Wen Yu

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A study of structural behavior was conducted and a design equation was developed that accounts for the degradation in web crippling capacity caused by web openings for unreinforced single web cold-formed steel flexural members subjected to the End-One-Flange (EOF) loading condition. The research findings enable the current EOF design provisions for sections without web openings to be modified by a reduction factor equation to obtain the web crippling capacity for sections with web openings. The modified capacity is considered for the web crippling capacity in the absence of bending moment for the same cross section and load bearing length.

Go to article

Ultimate Behaviour Of Trapezoidal Steel Sheets In Bending, Raffaele Landolfo, Fredrico M. Mazzolani Oct 1994

Ultimate Behaviour Of Trapezoidal Steel Sheets In Bending, Raffaele Landolfo, Fredrico M. Mazzolani

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A systematic analysis of existing trapezoidal steel sheets commonly used in the market is performed in order to compare their carrying capacity at the light of their ultimate behaviour. The complete investigation has been developed both from theoretical and experimental points of view. In this paper, the description of the experimental techniques, the numerical simulation of the obtained results as well as the exploitation of these data in order to check the codified design rules are reported.

Go to article

Slip And Separation At Interface Of Composite Slabs, Li An, Krister Cederwall Oct 1994

Slip And Separation At Interface Of Composite Slabs, Li An, Krister Cederwall

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Resistance of composite elements at the sheet-concrete interface was determined from a small-scale test. The influence of resistance at the interface, especially the vertical resistance, on the behavior of composite slabs was studied by a finite element method. The results showed that the horizontal shear resistance affected greatly on the capacity of the composite slabs. However, the vertical resistance did not influence much on the capacity and it can be neglected in the analysis.

Go to article

Core Loaded Thin-Walled Sleeved Column System, S. Hariharan, K. Mahadevan, Venkatakrishnan Kalyanaraman Oct 1994

Core Loaded Thin-Walled Sleeved Column System, S. Hariharan, K. Mahadevan, Venkatakrishnan Kalyanaraman

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

In conventional columns, the load carrying capacity is governed by the yield strength of the material and its buckling strength. The yield strength of the compression member is governed by the mechanical property of the material and its area of cross section while its elastic buckling strength depends on the least flexural stiffness (EI) ofthe cross section and its effective unsupported length. The elastic flexural buckling strength of a compression member is given by the well known Euler equation. In practice the strength of conventional compression members is less than bot.h the yield strength and Euler buckling strength due to …

Go to article

An Innovative Cold-Formed Floor System, John R. Hillman, Thomas M. Murray Oct 1994

An Innovative Cold-Formed Floor System, John R. Hillman, Thomas M. Murray

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Optimizing the use of building materials has always been one of the primary goals of engineers. It is a constant challenge to seek innovative methods to build lighter weight structures. Sometimes this is achieved through the development of new building materials, other times it can be accomplished by creating entirely new types of structural systems. Often lightweight structures can be more asthetically pleasing because of their stream-lined appearance. However, in general the motivating factor in building lightweight structures is to reduce the overall cost. One portion of a structure which offers tremendous potential for weight reduction is the floor system. …

Go to article

Analysis And Design Of Continuous Sandwich Beams, Paavo Hassinen, Lassi Martikainen Oct 1994

Analysis And Design Of Continuous Sandwich Beams, Paavo Hassinen, Lassi Martikainen

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Sandwich panels are composed of two thin face layers and a lightweight core between them. Panels are used to carry large bending moments and axial forces, which capacity is reduced, if imperfections, for example initial deflections or transverse loads, appear in the face layers. At intermediate supports the panel is stressed by a high bending moment and, in addition, by a concentrated lateral support reaction. The strength against the simultaneous bending moment and support reaction depends on the bending stiffness and on the bending and buckling strength of the face and on the compressive strength of the core. The paper …

Go to article

Axial Load Capacity Of Sheeted C And Z Members, Richard C. Kaehler, James M. Fisher, Neil J. Glaser Oct 1994

Axial Load Capacity Of Sheeted C And Z Members, Richard C. Kaehler, James M. Fisher, Neil J. Glaser

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

An equation is developed for calculating the axial load capacity of C and Z shaped members used in roof or wall systems. The equations were determined to be valid for through fastened metal decking but not standing seam roof decking.

Go to article

Tests Of Purlins With Concealed Fixed Sheeting, Michael Celeban, Chris Healy, Gregory J. Hancock Oct 1994

Tests Of Purlins With Concealed Fixed Sheeting, Michael Celeban, Chris Healy, Gregory J. Hancock

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A test program on purlin-sheeting systems with concealed fasteners has been performed at the University of Sydney in a vacuum test rig. The test rig used a conventional vacuum box to simulate wind uplift. Z-section purlins were tested in three span lapped configurations, and as simple spans. The test purlins were supported by a range of bracing (bridging) members ranging from zero to two braces per span. In addition, a range of section slenderness values was used so as to precipitate both local buckling and yielding failures in the section. The purpose of the paper is to compare the test …

Go to article

Stainless Steel Tubular Joints - Tests And Design Of X- And K-Joints In Circular Hollow Sections, Anthony S. Hasham, Kim J. R. Rasmussen Oct 1994

Stainless Steel Tubular Joints - Tests And Design Of X- And K-Joints In Circular Hollow Sections, Anthony S. Hasham, Kim J. R. Rasmussen

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The paper describes a test program on welded stainless steel X- and K-joints fabricated from circular hollow section brace members and chords. The X-joints were tested in compression and tension using three different ratios of brace diameter to chord diameter. The K-joints were tested using three different ratios of brace diameter to chord diameter and three different angles between chord and brace members. A total of 15 tests were performed. Design rules are proposed for X- and K-joints by adopting the rules of the CIDECT Recommendations for carbon steel tubular structures and replacing the yield stress in these recommendations by …

Go to article

Stainless Steel Tubular Joints - Tests And Design Of X- And K-Joints In Square Hollow Sections, Ben Young, Kim J. R. Rasmussen Oct 1994

Stainless Steel Tubular Joints - Tests And Design Of X- And K-Joints In Square Hollow Sections, Ben Young, Kim J. R. Rasmussen

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The paper describes a test program on welded stainless steel X- and K-joints fabricated from square hollow section brace members and chords. The X-joints were tested in compression and tension using different ratios of brace width to chord width. The K-joints were tested by varying the ratio of brace width to chord width, the angle between chord and brace members, and the preload applied to the chord. A total of 23 tests were performed. Design rules are proposed for X- and K-joints by adopting the rules of the CIDECT Recommendations for carbon steel tubular structures and replacing the yield stress …

Go to article

The Lateral Torsional Buckling Strength Of Cold-Formed Stainless Steel Beams, G. J. Van Den Berg, P. J. Bredenkamp Oct 1994

The Lateral Torsional Buckling Strength Of Cold-Formed Stainless Steel Beams, G. J. Van Den Berg, P. J. Bredenkamp

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The findings of an investigation of the lateral torsional buckling strength of cold-formed stainless steel beams are reported in this study. The sections under consideration are cold-formed lipped channel sections spot-welded back to back to form doubly-symmetric lipped I-beams. The beams were fabricated from a modified AISI Type 409 stainless steel, designated Type 3CR12 corrosion resisting steel. The purpose of this study is to compare the experimental lateral torsional buckling strengths of doubly-symmetric beams to the theoretical predictions proposed by the ASCE Specification for the Design of Cold-Formed Stainless Steel Structural Members. It was concluded in this investigation that an …

Go to article

The Strength Of Partially Stiffened Stainless Steel Compression Members, Y. Buitendag, G. J. Van Den Berg Oct 1994

The Strength Of Partially Stiffened Stainless Steel Compression Members, Y. Buitendag, G. J. Van Den Berg

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The instability of partially stiffened stainless steel compression members due to local buckling of the flange element or flange and lip interaction has not been studied before. In this investigation the critical local buckling and post-buckling behaviour of cold-formed partially stiffened stainless steel compression elements is studied. It is concluded in this investigation that a plasticity reduction factor should be used to evaluate the critical local buckling stress as well as the effective width to calculate the ultimate capacity of partially stiffened stainless steel compression members.

Go to article

Web Crippling Of Stainless Steel Cold-Formed Beams, S. A. Korvink, G. J. Van Den Berg Oct 1994

Web Crippling Of Stainless Steel Cold-Formed Beams, S. A. Korvink, G. J. Van Den Berg

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The results of an investigation on the web crippling strength of cold-formed stainless steel channel sections are presented in this paper. The steels under consideration are AlSI Type 430 stainless steel and a modified AlSI Type 409, designated Type 3CR12 corrosion resisting steel. The lipped channel sections were manufactured by a press braking process. Beams were tested in pairs, lips facing, in an interior-one-flange loading configuration. Experimental results were compared with the theoretical predictions given in the 1991 edition of the Specification for the Design of Cold-Formed Stainless Steel Structural Members. It was concluded in this study that the experimental …

Go to article

Experiments On Lipped Channel Flexural Members, Maria E. Moreyra, Teoman Pekoz Oct 1994

Experiments On Lipped Channel Flexural Members, Maria E. Moreyra, Teoman Pekoz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A series of tests were conducted on lipped channel flexural members to study the behavior of edge stiffened elements. The details and the results of these tests as well as tests by others are discussed in this paper. All the test results are compared with those predicted by the AISI Specification.

Go to article

Finite Element Studies On Lipped Channel Flexural Members, Maria E. Moreyra, Teoman Pekoz Oct 1994

Finite Element Studies On Lipped Channel Flexural Members, Maria E. Moreyra, Teoman Pekoz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper is second in a series of three papers describing the research sponsored by the American Iron and Steel Institute. Physical test results described in the first paper combined with the finite element solution parametric studies described in this paper were used in the third paper to develop improved design procedures for edge stiffened elements.

Go to article

Strength Of Stiffened Plates With Openings, Mahen Mahendran, N. E. Shanmugam, J. Y. Richard Liew Oct 1994

Strength Of Stiffened Plates With Openings, Mahen Mahendran, N. E. Shanmugam, J. Y. Richard Liew

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The load-deflection and ultimate strength behaviour of longitudinally stiffened plates with openings was studied using a second-order elastic post-buckling analysis and a rigid-plastic analysis. The ultimate strength was predicted from the intersection point of elastic and rigid-plastic curves and the Perry strut formula. Comparison with experimental results shows that satisfactory prediction of ultimate strength can be obtained by this simple method. Effects of the size of opening, the initial geometrical imperfections and the plate slenderness ratio on the strength of perforated stiffened plates were also studied.

Go to article

The Compressional Behaviour Of Perforated Elements, J. Rhodes, Falk D. Schneider Oct 1994

The Compressional Behaviour Of Perforated Elements, J. Rhodes, Falk D. Schneider

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The behaviour of stub columns with a series of different perforation patterns is examined on the basis of tests. The tests concentrate on plain channel cross sections with perforation layouts systematically varied to examine the effects of perforation position, dimensions and number on the section performance. The application of existing cold formed steel design codes to perforated members is examined on the basis of comparison with the tests, and various modifications to the design codes are considered to take perforations into account These are described and the comparison with test results is illustrated.

Go to article

Residual Stresses In Cold Formed Steel Sections, G. Roy, Dimos Polyzois, M. A. Mohamedien Oct 1994

Residual Stresses In Cold Formed Steel Sections, G. Roy, Dimos Polyzois, M. A. Mohamedien

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Initial or residual stresses are considered one of the major factors that affect the design of the cold-formed steel sections, since they could reach 50% of the yield stress of the material. As part of a comprehensive experimental program on the use of cold-formed steel sections in transmission towers, an investigation on the magnitude and distribution of residual stresses in cold-formed steel sections was undertaken. The study involved 83 tests using two nondestructive methods, and two destructive methods, to determine the magnitude and distribution of residual stresses. The paper summarizes the results from this investigation and outlines a number of …

Go to article

The Analysis Of Restrained Purlins Using Generalised Beam Theory, C. Jiang, Philip Leach, J. Michael Davies Oct 1994

The Analysis Of Restrained Purlins Using Generalised Beam Theory, C. Jiang, Philip Leach, J. Michael Davies

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

A paper presented at the Eleventh Speciality Conference in 1992(1) introduced the Generalized Beam Theory (GBT) and illustrated its use. It was used in ftrst-order analyses t0 calculate the stress distribution in a cross section takeing account of cross section distortion, and in second-order bifurcation problems to calculate the critical buckling load of a free cross section subject to axial load. Subsequent papers(2,3) have given more detailed information on the basis of GBT and used its second-order facilities to investigate the buckling of sections under both uniform and non-uniform bending moment. This paper extends the use of GBT to consider …

Go to article

Bending And Shear Behavior Of Web Elements With Openings, Roger A. Laboube, Ming-Yang Shan, Wei-Wen Yu Oct 1994

Bending And Shear Behavior Of Web Elements With Openings, Roger A. Laboube, Ming-Yang Shan, Wei-Wen Yu

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Cold-formed steel C-sections are frequently used as wall studs and floor joists in both commercial and residential construction. To facilitate installation of ancillary systems such as electrical wiring and plumbing, the C-section is manufactured with a web opening. Although the opening offers construction advantages, it may degrade the structural integrity of the member. To quantify the degrading effect of a web opening, a study has been conducted at the University of Missouri-Rolla (UMR). The UMR study included the loading conditions of bending, shear, web crippling and the combinations thereof. This paper summarizes the results of an experimental study of the …

Go to article

Multiple Stiffened Deck Profiles, M. Sommerstein, R. P. Papazian, R. M. Schuster Oct 1994

Multiple Stiffened Deck Profiles, M. Sommerstein, R. P. Papazian, R. M. Schuster

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

CAN/CSA-S136-M89 and the AISI Specification on Cold Formed Steel Design use different methods to determine the effective width of multiple stiffened compressive elements when no local buckling in the sub-elements occurs. Both methods replace the multiple stiffened element with a flat plate element centered at the neutral axis of the multiple stiffened element. The methods differ in assigning an equivalent thickness to the straight line element. The AISI method provides sufficient thickness to match the moment of inertia of the multiple stiffened element, while the S136 method makes use of orthotropic plate theory, however, dealing only with the elastic buckling …

Go to article

Behaviour Of Cold-Formed Shs Beam-Columns, Raef M. Sully, Gregory J. Hancock Oct 1994

Behaviour Of Cold-Formed Shs Beam-Columns, Raef M. Sully, Gregory J. Hancock

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper describes a test programme conducted into the behaviour of cold-formed, compact square hollow section beam columns. The tests were conducted in a purpose built test rig capable of applying load and moment in a constant ratio. The test specimens were pin-ended specimens loaded, with varying load/moment ratios, at two different ratios of end moment. The results of the tests were simulated using a finite element programme. This finite element programme was used to find maximum second order elastic moments, for the section tested, at varying ratios of end moment. The results of this numerical investigation are compared with …

Go to article

Buckling Behaviour Of Cold-Formed Thin-Walled Members By Spline Finite Strip Analysis, Joachim Lindner, Y. L. Guo Oct 1994

Buckling Behaviour Of Cold-Formed Thin-Walled Members By Spline Finite Strip Analysis, Joachim Lindner, Y. L. Guo

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Local,distortional and overall buckling (including overall flexural buckling and overall flexural-torsional buckling) behaviour of cold-formed thin-walled columns is presented which is based on an inelastic spline finite strip analysis. The columns are loaded centrally at the ends. The increment of yield stresses in the corner area due to cold-forming work, together with a more real stress-strain curve of material, that exhibits continuous strain hardening for the stress above the proportional limit of material, are involved in the analysis. The cold-formed section is divided into two different types of strips, one is a flat plate strip on the central part of …

Go to article

Elastoplastic Large Deflection Analysis Of Cold-Formed Members Using Spline Finite Strip Method, Shi-Lin Chen, Shao-Fu Li, Shan-Feng Fang Oct 1994

Elastoplastic Large Deflection Analysis Of Cold-Formed Members Using Spline Finite Strip Method, Shi-Lin Chen, Shao-Fu Li, Shan-Feng Fang

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The elastoplastic large deflection behaviour of cold-formed members is analysed by a nonlinear spline finite strip method. The method is developed using the principle of virtual work, based on the total Lagrangian description. It is used to deal with problems of geometric and material nonlinearity. The displacement function of a strip is expressed as the product of transverse interpolation polynomials and longitudinal B3-splines. The effect of arbitrary initial imperfections is taken into consideration. The influence of cold-bending residual stress on the local and overall behaviour of cold-formed lipped angle columns is investigated especially. The numeric examples show that the method …

Go to article

Behavior And Failure Mechanism Of Composite Slabs, J. J. Roger Cheng, Michael C. H. Yam, E. B. Davison Oct 1994

Behavior And Failure Mechanism Of Composite Slabs, J. J. Roger Cheng, Michael C. H. Yam, E. B. Davison

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The behavior of a composite slab using a 636 deck profIle was investigated experimentally. Twenty-three one-way slab tests and twenty-four pull-out tests were performed. It was found that the behavior and shear bond load of the composite slab were significantly affected by the depth of the embossment shear key. The average shear stress from the pull-out tests was generally lower than that of the one-way slab tests due to a lack of the transverse load effects which influenced the frictional resistance between the concrete slab and the steel deck.

Go to article

Further Studies Of Composite Slab Strength, Angela S. Terry, Samuel W. Easterling Oct 1994

Further Studies Of Composite Slab Strength, Angela S. Terry, Samuel W. Easterling

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The results to date of a research program focusing on the strength of composite slabs are described. Full-scale experimental slab tests are compared to strengths calculated using the Steel Deck Institute Composite Deck Design Handbook. Based on the comparisons, recommendations are made for modifications to the calculation procedures.

Go to article

Review Of Concepts Concerning Bond Of Steel Decking, Mark Patrick, Russell Q. Bridge Oct 1994

Review Of Concepts Concerning Bond Of Steel Decking, Mark Patrick, Russell Q. Bridge

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

It is well established that bond between deformed reinforcing bars and concrete is produced by three distinct actions: chemical adhesion; friction; and mechanical interlock. However, researchers of composite slab behaviour do not generally agree on the actions which produce bond between steel decking and concrete, and the concepts they have developed in this regard are reviewed.

Go to article

Local Buckling Of Filled Sections, Howard D. Wright Oct 1994

Local Buckling Of Filled Sections, Howard D. Wright

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The buckling capacity of plates in contact with a rigid medium is greater than that for free plates. Such plates occur in sections filled with a suitably stiff material. Classical analysis is used to compare restrained and free plates.

Go to article

Tests Of Thin-Walled Concrete-Filled Steel Tubes, Martin D. O'Shea, Russell Q. Bridge Oct 1994

Tests Of Thin-Walled Concrete-Filled Steel Tubes, Martin D. O'Shea, Russell Q. Bridge

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Concrete filled tubes are likely to be economical with the use of very high strength concretes and thin-walled steel tubes. The strength of the steel tube is affected by local buckling effects which may also influence the confinement to the concrete infill. Very high strength concretes exhibit rapid unloading in the post-ultimate region. The strength of the composite column is not a simple superposition of strengths of the individual steel and concrete components. This paper describes the initial tests of an experimental program to determine the effects of local buckling on concrete filled tubes. Tubes with a diameter to wall …

Go to article

First Prev Next Last