Digital Commons Network^™

Transforming Dredged Sediment Into Reactive Clay: Critical Review Of Calcination, Reactivity, And Sustainable Valorization As Supplementary Cementitious Material, Seongho Han, Sanghwon Wi, Koochul Ji, Keun Hyeok Yang, Farshad Rajabipour, Kamal H. Khayat, Jinyoung Yoon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Dredged sediment (DS) is generated worldwide in large volumes through routine port and waterway maintenance, yet its disposal presents environmental and economic challenges. Recently, calcined dredged sediment (CDS) has emerged as a supplementary cementitious material (SCM), offering a viable alternative to traditional SCMs, such as fly ash and slag cement. This review synthesizes current knowledge on the physical, chemical, and mineralogical characteristics of raw DS and pretreatment strategies aimed at dewatering, organic matter removal, and contaminant stabilization. The effects of calcination on the production of reactive amorphous aluminosilicates are also discussed. Emphasis is placed on physicochemical changes revealed by experimental …

Low-Carbon Concrete For Sustainable Construction: A Comprehensive Review Of Performance Characteristics, Implementation Challenges, And Decarbonization Pathways, Fazel Azarhomayun, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing the carbon footprint of concrete has become a central objective in sustainable construction. Low-carbon concrete (LCC), developed primarily through clinker reduction, supplementary cementitious materials, and alternative binder strategies, offers a promising route for lowering embodied emissions while maintaining the performance requirements of structural concrete. This comprehensive review consolidates the current state of knowledge on LCC, identifies critical research and implementation gaps, and examines its material composition, mixture-design methodologies, performance characteristics, structural applications, implementation challenges, and decarbonization pathways. Single-SCM systems have been reported at clinker-replacement levels approaching 50%, although durability at these replacement levels, particularly carbonation resistance, remains system- and …

Design Framework For Polymer Gel Treatments From A Database Of Field Projects, Baojun Bai, Munqith Aldhaheri, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study compiles and analyzes data from over 125 published field projects around the world, covering nearly 900 treated wells. Building on those detailed studies, this paper distills the most important findings into a concise, practical, and actionable framework to guide where in-situ gel treatments should be applied, how they should be designed, and how their outcomes can be evaluated. The proposed workflow guides engineers through five integrated stages: screening appropriate gel types, designing formulation and injection strategies, predicting field response, evaluating treatment performance, and conducting iterative refinement with feedback loops to adjust designs based on observed outcomes. The framework …

An Instance Segmentation Based Global Mppt Method For Pv Systems Under Partial Shading Condition, Ehab Ur Rahman, Yousef Mahmoud, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Partial shading in photovoltaic (PV) systems creates multiple Local Maximum Power Points (LMPPs) on the power-voltage (P-V) curve, causing conventional Maximum Power Point Tracking (MPPT) algorithms to converge prematurely to suboptimal operating points and resulting in significant energy losses. This work proposes a novel vision-based framework that integrates computer vision with Global Maximum Power Point Tracking (GMPPT) to maximize energy harvesting in partially shaded PV systems. The proposed method captures real-time imagery of PV panels to identify cell-level shading patterns, which are subsequently mapped to module electrical characteristics to enable direct analytical estimation of the GMPP voltage. An instance segmentation …

Converting Co2 Into Carbon Nanotubes Via Sequential Co2 Methanation And Methane Pyrolysis, Kaiying Wang, Hao Feng, Ahmad Helaley, Xiaoqing He, Bohong Zhang, Jie Huang, Xinhua Liang

Electrical and Computer Engineering Faculty Research & Creative Works

This study presents a sequential thermochemical catalytic process for converting CO₂ into carbon nanotubes (CNTs), achieving nearly 99% overall CO₂ conversion and solid carbon yields of up to 49% in a single pass. The overall transformation is divided into two thermodynamically favorable steps: (1) low-temperature CO₂ methanation to CH₄ over a sol-gel-prepared Ni87Ce_6.5Zr_6.5-SG catalyst, which achieved >95% CO₂ conversion at 250 °C in a single pass, and (2) subsequent methane pyrolysis to CNTs and H₂ over a Ni@Al₂O₃-IE core-shell catalyst, which showed improved stability and carbon …

Oriented Electrospun Fibers Of Poly(Pro-Curcumin/Peg) Sequester Reactive Oxygen Species And Promote The Growth Of Schwann Cells, Jack W. Devlin, Payton R. O'Connor, Conrad H. Cheung, John T. Leman, Martin Oudega, Edmund F. Palermo, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

In the biological injury microenvironment, pathologically elevated oxidative stress hinders healthy cell migration. Aligned electrospun fibers are used as tissue engineering scaffolds to support and guide the directionality of cell migration. The ability of cells in the central nervous system to sequester and quench reactive oxygen species is limited, and most electrospun fibers do not exert any antioxidant activity on contact. Thus, the challenge remains in designing a scaffold that can both guide cells to the injury site as well as sequester and quench excess free radicals, allowing cells to thrive and potentially regenerate. Curcumin is a well-known, potent antioxidant, …

Enhanced Uav Surveillance With Rf-Based Drone Identification Using Transfer Learning, Prajoy Podder, Maciej Jan Zawodniok, Sanjay Madria

Electrical and Computer Engineering Faculty Research & Creative Works

With the development of technology and the decrease in costs, drones are now becoming easily accessible to the public. As the accessibility of this technology continues to grow, the concerns of security and surveillance increase, and to ensure a sense of security, the need to have reliable drone detection and identification systems is more urgent than ever. Besides, many civilian applications have been found for drones, which play a huge role in modern security and warfare. Unauthorized drones can be very dangerous regarding security issues, as they can be used for spying, smuggling, or even attacks against critical infrastructure. We …

Investigation Of Portland Limestone Cement Blended With Biochar From Downdraft Gasification: Hydration Kinetics, Microstructure, Rheology, And Performance Mechanisms, Ugochukwu Ewuzie, Paul C. Ani, Abdulkareem O. Yusuf, Joseph D. Smith, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

The widespread adoption of Portland Limestone Cement (PLC) in U.S. concrete production has necessitated research into commercially available supplementary cementitious materials (SCMs) for formulating high-performance, low-carbon blended binders with PLC. This study investigated the influence of biochar (BC) in biochar-PLC composites (CBCs), focusing on hydration kinetics, microstructure, rheology, pore-solution chemistry, compressive strength, and the underlying mechanisms. Biochar was produced via downdraft gasification at 850 °C and incorporated into PLC at 5, 7, and 10% substitution by mass. Isothermal calorimetry and hydration data modeled using the Knudsen equation revealed that BC retarded early hydration but improved hydration degree and later-age heat …

Olaf: Towards Robust Llm-Based Annotation Framework In Empirical Software Engineering, Mia Mohammad Imran, Tarannum Shaila Zaman

Computer Science Faculty Research & Creative Works

Large Language Models (LLMs) are increasingly used in empirical software engineering (ESE) to automate or assist annotation tasks such as labeling commits, issues, and qualitative artifacts. Yet the reliability and reproducibility of such annotations remain underexplored. Existing studies often lack standardized measures for reliability, calibration, and drift, and frequently omit essential configuration details. We argue that LLM-based annotation should be treated as a measurement process rather than a purely automated activity. In this position paper, we outline the Operationalization for LLM-based Annotation Framework (OLAF), a conceptual framework that organizes key constructs: reliability, calibration, drift, consensus, aggregation, and transparency. The paper …

Phases And Dynamics Of An Impurity Immersed In One-Dimensional Quantum Droplets, Dimitrios Diplaris, Ilias A. Englezos, Friethjof Theel, Peter Schmelcher, Simeon I. Mistakidis

Physics Faculty Research & Creative Works

We explore the ground-state properties of a single impurity immersed in a one-dimensional quantum droplet medium formed by a two-component Bose mixture. Relying on ab initio simulations, we demonstrate that tuning the impurity–droplet interactions allows to controllably reshape the droplets' density profiles and associated correlation patterns. For attractive impurity-medium couplings, the impurity becomes localized within the droplet, which exhibits a density hump at the vicinity of the impurity, while repulsive interactions facilitate phase separation. Comparing our many-body results with the appropriate extended Gross–Pitaevskii description, we find adequate agreement for the droplet density profiles, with the effective field approach systematically overestimating …

Physics-Informed Machine Learning-Aided Framework For Entrainment Fraction In Gas-Liquid Two-Phase Annular Flow, Anadi Mondal, Subash L. Sharma

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

The liquid film flow rate or droplet flow rate in annular flow is determined by a parameter known as the entrainment fraction. Conventional empirical correlations are commonly employed for predicting the entrainment fraction; however, their applicability is often restricted to specific operating conditions and working fluids. Recently, a few machine learning (ML) models have been developed to achieve better accuracy in entrainment fraction prediction. However, these models are completely data-driven, meaning they are good for prediction in the interpolated domain, but exhibit limited generalization capability in the extrapolated domain. To address this limitation, a physics-informed machine learning-aided framework (PIMLAF), combining …

From Ports To Projects: Estimating The Impact Of Supply Chain Volatility And Trade Policy Changes On Construction Material Prices, Ahmed Shiha, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Construction material markets are often reliant on imported commodities. Import tariffs and temporary trade barriers disrupt supply chains, presenting stakeholders with uncertainties regarding how such disruption impacts construction material prices. Despite the plethora of research efforts that examine the effects of economic conditions on construction material prices, the impacts of the import quantities remain understudied. This paper fills this knowledge gap using a multistep methodology. First, the prices of major construction materials and the quantities of the relevant imported commodities are retrieved. Second, the stability of their historical trends was assessed using econometrics-based tests. Third, a nonlinear autoregressive distributed lag …

Recent Advances In The Rheological Properties Of Ultra-High-Performance Concrete: A Critical Review, Le Teng, Kamal H. Khayat, Jiaping Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) with adapted rheology continues to attract interest considering the requirement for novel processing techniques such as self-consolidating, pumping, spraying, and three-dimensional (3D) printing. The rheology of UHPC is complex due to its high solid volume fraction, low water content, and wide range of constituent materials that affect its flow properties. This work provides guidance for tailoring the mixture proportioning of UHPC to secure proper rheological properties and performance of UHPC for various applications. In the first part of this work, key physical, physicochemical, and chemical factors that can affect the rheological properties of UHPC are discussed. Rheological …

A Fiftieth Year Retrospective On The 1976 Mw 7.5 Motagua Earthquake In Guatemala, Grant Clark, Trenton Mcenaney, Jeremy Maurer, Andreas Eckert, Stephen S. Gao, Omar G. Flores, Robin Yani, Tina Niemi, Christoph Grützner, Francisco Gomez, Jonathan Obrist-Farner

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

On 4 February 1976, an Mw > 7:5 earthquake ruptured ∼240 km of the Motagua fault in Guatemala, causing ∼23,000 fatalities. This event provided evidence for the fault's role as a major transform boundary between the North American and Caribbean plates. Field observations, seismological analyses, and postseismic studies helped constrain fundamental aspects of the 1976 earthquake mechanics and the spatial complexity of the rupture. This event opened a window for studies documenting past deformation along this plate boundary across multiple spatial and temporal scales. Five decades of research have established this earthquake as an important event for understanding strike-slip ruptures along …

Eliminating Barriers For The Implementation Of Automation In The Mining Industry, Sefiu O. Adewuyi, Kray Luxbacher, Kanagy David, Miller Ben, Miller Hugh, Michael Moats, Savit Mark

Materials Science and Engineering Faculty Research & Creative Works

The integration of new technologies into U.S. mining operations is necessary for achieving continuous improvement in worker health and safety, as well as improving operational efficiency, but many have questioned why uptake of autonomy in the U.S. mining industry has been slow compared to other nations. Despite extensive research on mining automation, there remains a critical gap in understanding and systematically identifying the barriers to its adoption within the U.S. mining industry and globally. To quantify these barriers, a workshop model of data collection was employed. A total of 708 invitations were extended to professionals to participate in nine different …

Exploiting Underground Mine Topology For Resilient Concurrent Lora Mesh Emergency Communications: Architecture, Protocol Design, And Performance Analysis, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Underground mine emergencies compromise fixed communication infrastructure exactly when situational awareness is most critical for effective rescue operations. Existing LoRa mesh protocols fail in underground mines because they ignore the structured topology of tunnel networks, specifically the waveguide effect along straight galleries, severe signal discontinuity at junctions, and the dead-end geometry of working faces. This paper presents the Topology-Aware Concurrent LoRa (TACL) mesh protocol, in which each node autonomously infers its structural role from local RF observations and packet header information, without GPS, pre-loaded mine maps, or central coordination. Role classification resolves the contender estimation problem (Formula presented.) left open …

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets …

Emerging Biomaterials For Next-Generation Wound Healing: From Infection Control To Tissue Regeneration, Unqa Mustafa, Aiman Kaleem, Syeda Zunaira Bukhari, Hamna Riaz, Maryam Iftikhar, Muhammad Usman Munir, Xianghao Xiao, Mingwu Shen, Xiangyang Shi, Mostafa Yazdi, Ayesha Ihsan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wound healing is a multifactorial biological process that regenerates damaged tissues through a series of molecular and cellular events in a coordinated manner. An interruption in this cascade can lead to impaired healing, especially in diabetic complications, where effective treatment is crucial for controlling infections and promoting tissue regeneration. Recent advances in bioengineering and digital health have catalyzed the development of next-generation wound therapies capable of actively modulating the wound microenvironment, promoting regeneration, and enabling real-time clinical assessment. This review summarizes the fundamentals of physiological wound healing and highlights the significant developments in biomaterial dressings and scaffolds, 3D bioprinting, as …

The Bridge Newsletter Summer 2026, Missouri University Of Science And Technology

The Bridge Newsletter

Features:

• Networking Nights

• McEvilly named president of S&T's Board of Trustees

• Forsee joins Kummer Foundation Board

• Lamitola named Outstanding Engineer in Government

Pso-Style Social Influence In An Ant Colony Algorithm For Continuous-Domain Optimization, Ashraf M. Abdelbar, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

ACOR is a well-established Ant Colony Optimization (ACO) algorithm for continuous-domain optimization. In this paper, we propose an extension (which we call ACOR∗) in which several fundamental modifications are made to ACOR's solution construction process, including the incorporation of a social influence mechanism borrowed from Particle Swarm Optimization (PSO). Our modifications to the ACOR algorithm are intended to promote search diversity and combat premature convergence. We experimentally evaluate our proposal in the context of training feedforward neural networks for classification using 65 widely used datasets from the University of California Irvine (UCI) repository, as well as the optimization of several …

Multiplexed Fabry-Pérot High-Temperature Sensing Based On Dispersive Microwave-Photonic Frequency-Time Domain Analysis, Ruimin Jie, Chen Zhu, Bohong Zhang, Koustav Dey, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

We propose and experimentally demonstrate a multiplexed high-temperature Fabry-Pérot (FP) fiber sensing system interrogated by dispersive microwave-photonic frequency-time domain analysis (DM-FTDA). In the proposed architecture, incoherent broadband probing light is modulated by radio-frequency (RF) signals and then reflected by a parallel network of hollow-core photonic crystal fiber FP (HCPCF-FP) sensors. A chirped fiber Bragg grating provides strong dispersion to map the composite FP spectral response into a well-defined microwave transfer function. Unlike conventional optical Fourier-domain multiplexing that requires deliberate cavity-length allocation, the proposed approach achieves multiplexing via delay-dominated discrimination. Distinct delay fibers are assigned to each sensor branch, and an …

Tracking Continuous Non-Differentiable Trajectories In Euler–Lagrange Systems With Continuous Dynamics, Nilay Kant

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Tracking controllers for Euler–Lagrange systems are designed under the assumption that reference trajectories are continuous, and at least twice differentiable with respect to time. However, this assumption precludes several use cases, such as when a robot end-effector must track a path with corners at constant speed. This paper introduces the control design for tracking continuous but non-differentiable trajectories in fully actuated Euler–Lagrange systems that have continuous-time dynamics. The proposed controller combines a continuous feedback law with impulsive inputs, that are intermittently applied at the instants of non-differentiability. A Lyapunov stability analysis establishes global exponential convergence of the tracking error to …

A Carbon Fiber-Based Self-Sensing Approach For Monitoring Damage Evolution In Coal Pillars, Shan Ning, Weibing Zhu, Jie Gao, Wei Qin, Guang Xu, Jingmin Xu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Under long-term high stress and dynamic disturbances, damage accumulation within underground coal masses can induce sudden instability, posing a considerable threat to coal mine safety. Real-time acquisition of coal damage information is essential for disaster prevention and control. This study proposes a coal damage and fracturing monitoring approach based on a carbon fiber composite mortar (CFCM) coating. By applying the CFCM coating to coal specimen surfaces and monitoring resistance changes, the dynamic evolution of damage can be tracked. The study combines experimental mechanical loading, continuous electrical resistance monitoring and acoustic emission recording with detailed numerical modelling to comprehensively evaluate sensing …

Evaluation Of The Effect Of Vibration On Signal Reflection In Coaxial Cable Connectors For Vibration Sensing In Aircraft Structures And Systems, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Daniel S. Stutts, Jie Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effects of vibration on signal reflection (S11) in aerospace data transmission line (ADTL) and commercial data transmission line (DTL) connectors for their alternative use as vibration sensors. The impact of vibration on the S11 signal was investigated on five ADTL and four DTL connectors at six vibration frequencies (20 Hz, 40 Hz, 80 Hz, 160 Hz, 320 Hz, and 640 Hz) and four vibration accelerations (0.5G, 1 G, 2 G, and 4G). The experiment was conducted using a split-plot design with a cable type assigned as the main-plot factor, with vibration frequency and acceleration as subplot …

A Hybrid Mechano-Thermal Route To Synthesize Reactive Pozzolans From Clay Minerals: A Case Of Kaolinite, Oluwadamilare Charles Adesina, Bryan K. Aylas-Paredes, Brian R. Cherry, Luciano A. Gobbo, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Aluminosilicate resources from unconventional sources offer promising potential for developing low-carbon supplementary cementitious materials (SCMs), yet their activation typically requires energy-intensive thermal processing. Kaolinite is a geographically abundant and highly attractive precursor clay mineral to reduce the clinker factor in concrete. By integrating mechano- and thermo- chemistry sequentially in a novel hybrid mechano-thermal activation (MTA) strategy for clay mineral activation, the dehydroxylation of pure kaolinite polymorphs KGa-1b and KGa-2 for enhanced pozzolanic reactivity is unlocked at temperatures that are lower than those needed for conventional thermal activation (TA). The mechano-chemical activation (MCA) step that induces significant structural defects and disorder …

Public Preferences For Critical Mineral Mining In The U.S.: Evidence From A Discrete Choice Experiment, Bamidele Ajiga, Kwame Awuah-Offei, Mahelet G. Fikru

Mining Engineering Faculty Research & Creative Works

Even though there is widespread recognition that we need to mine more critical minerals for national security and energy needs, concerns about environmental impacts often lead to public opposition to proposed new mining projects. The literature lacks sufficient data from communities with proposed mineral projects to assess drivers of differences in support. This study investigates public preferences for mining projects in three states in the United States with proposed critical minerals projects, using a discrete choice experiment. Respondents evaluated projects that vary in job creation, state tax revenue, tailings reprocessing content, groundwater impacts, and surface water impacts. We also randomly …

Nanobubble Flotation Strategy Of Fluorite Integrating Experimental And Dft Analysis, Ahmed Sobhy, Hadeer El-Shamy, Nourhan Ahmed, Mohsen Farahat

Mining Engineering Faculty Research & Creative Works

The conventional froth flotation of fluorite from quartz-rich ores is reagent-intensive and faces selectivity challenges, impacting its economic and environmental sustainability. This study presents a novel green intensification strategy through the synergistic integration of nanobubble (NB) technology with Density Functional Theory (DFT) simulations. Systematic optimization of sodium oleate (collector) and sodium silicate (depressant) dosages in conjunction with hydrodynamic parameters (air/wash water velocity, NB generation rate) was conducted in both mechanical and column flotation systems. The incorporation of nanobubbles yielded transformative improvements: in mechanical flotation, collector and depressant consumption were reduced by over 50% while maintaining a concentrate grade exceeding 90% …

Review Of Recovery Processes Of Palladium, Platinum, Gold, And Silver From Metallurgical Wastes, Luis Sanchez-Calderon, Marthias Silwamba, Lana Alagha

Mining Engineering Faculty Research & Creative Works

Gold (Au), silver (Ag), platinum (Pt), and palladium (Pd) are precious metals with high economic value and critical industrial significance. Platinum and Pd, in particular, are classified as critical metals by major economies such as the United States, European Union, Japan, and South Korea due to their limited supply and essential roles in clean energy and high-technology applications. The rising market value and criticality of these metals have generated interest in their recovery, not just from primary ores and traditional source materials but also from secondary sources, such as metallurgical wastes. This review provides a thorough evaluation of current and …

Mechanism-Based Assessment Of Respirable Dust Exposure In Miners: Integrating Cfd-Dpm Simulation With Personalized Monitoring For Occupational Health Risk, Jiajun An, Fan Geng, Yuqing Feng, Changgeng Gui, Shihang Li, Xinjian He, Guang Xu, Zheng Zhang, Yibao Wang

Mining Engineering Faculty Research & Creative Works

Respirable dust in confined mine environments represents a significant environmental and occupational health challenge, requiring advanced monitoring and risk assessment methodologies. Current area-level monitoring overlooks the heterogeneity of personal exposure fields and the critical influence of human-ventilation interactions on local contaminant dispersion. This study develops an integrated monitoring-simulation method to quantify multi-worker dust exposure, assessing how worker position and orientation modulate risk under forced ventilation in narrow roadways. Occupational-specific dust sampling provided validation data for a three-dimensional Computational Fluid Dynamics-Discrete Phase Model (CFD-DPM) incorporating human-ventilation interactions. The model integrates a MATLAB-developed breathing function to dynamically couple respiratory cycles with particle …

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …