Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 61 - 90 of 29088

Full-Text Articles in Entire DC Network

Comparative Lca Of Germanium Production From Coal Fly Ash Using Chlorinated Distillation And Solvent Extraction, Dennis Dadzie, Kwame Awuah-Offei, Michael Moats, Nasib Al Habib, Weston Hartzell Jul 2026

Comparative Lca Of Germanium Production From Coal Fly Ash Using Chlorinated Distillation And Solvent Extraction, Dennis Dadzie, Kwame Awuah-Offei, Michael Moats, Nasib Al Habib, Weston Hartzell

Mining Engineering Faculty Research & Creative Works

Germanium is increasingly important for high-tech applications, yet its supply chain is vulnerable, with production limited to a few countries. Although prior research has explored alternative techniques for extracting and recovering germanium, the literature lacks comparative life-cycle evidence that quantifies their environmental burdens and translates findings into actionable (policy) recommendations. This paper presents a cradle-to-gate life-cycle assessment that compares the environmental burdens of producing 1 kg of single-crystal germanium from coal fly ash via chlorinated distillation (CD) and solvent extraction (SX). Under the study's assumptions, CD has lower potential impacts in 15 of 19 impact categories, while both routes show …

Go to article

Upar-Guided Dendrimer Gel Nanoparticles Reprogram Inflammation To Stabilize Atherosclerotic Plaques, Hsin Yin Chuang, Huari Kou, Yue-Wern Huang, Hu Yang Jul 2026

Upar-Guided Dendrimer Gel Nanoparticles Reprogram Inflammation To Stabilize Atherosclerotic Plaques, Hsin Yin Chuang, Huari Kou, Yue-Wern Huang, Hu Yang

Biological Sciences Faculty Research & Creative Works

Atherosclerosis is characterized by lipid deposition, chronic inflammation, and apoptosis within the arterial wall, leading to plaque progression and instability. Current lipid-lowering therapies fail to fully address residual cardiovascular risk driven by local inflammation and cell death. Here, we report the development of uPA-functionalized, rapamycin-encapsulated dendrimer nanoparticles (G5PM-uPA/RA) that preferentially accumulate in urokinase plasminogen activator receptor (uPAR)-enriched atherosclerotic plaque, including macrophage- and apoptosis-rich lesion microenvironments. G5PM-uPA/RA was constructed by cross-linking reaction-enabled flash nanoprecipitation in a custom-made multi-inlet vortex mixer, followed by thiol-maleimide conjugation of uPA for uPAR-guided targeting. The nanoparticles demonstrated uniform morphology, favorable stability, and efficient rapamycin loading. In …

Go to article

3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing, Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire Jul 2026

3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing, Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In additive manufacturing (AM), stress field drives distortion and warping and promotes delamination and cracking. Fast, accurate stress prediction is therefore essential for AM process planning and control, including real-time adaptive control, AM digital twins, data-driven and physics-driven workflows. However, spot-wise thermo-elasto-plastic finite element method (FEM) are often too slow for design iteration or real time use. Existing semi-analytical thermo-elasto-plastic approaches achieve high speed but are largely limited to 2D. In this paper, a full 3D semi-analytical thermo-elasto-plastic model for AM is built. The method uses a spot-wise analytical thermal field as the load and computes displacements and stresses via …

Go to article

An Automated Electrochemistry Platform For Accelerating The Characterization Of Enzymatic Electrochemistry, Michael A. Pence, Zachary A. Nguyen, Luke G. Kays, Dylan G. Boucher, Joaquín Rodríguez-López, Shelley D. Minteer Jul 2026

An Automated Electrochemistry Platform For Accelerating The Characterization Of Enzymatic Electrochemistry, Michael A. Pence, Zachary A. Nguyen, Luke G. Kays, Dylan G. Boucher, Joaquín Rodríguez-López, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

Enzymatic electrochemistry harnesses the selectivity of enzymes to enable electrochemical applications spanning sensing, synthesis, and energy conversion. However, the sequential nature of electroanalytical experiments limits throughput, restricting the scale at which enzyme-electrode systems can be screened. Here we demonstrate the capabilities of an automated electrochemistry platform, eLab, to increase the throughput of enzymatic electrochemistry investigations. We used the eLab to collect over 10,000 cyclic voltammograms across a large parameter space consisting of two enzyme variants (promiscuous and wild-type glucose oxidase), 20 saccharide substrates, 21 concentrations, and four scan rates, with measurements being made all in triplicate. The expansive dataset enabled …

Go to article

Higher-Order Statistical Analysis Of Inter-Arrival Times For Radiation Detector Deadtime Characterization And Paralysis Factor Determination, Abdallah Wazzan, Shoaib Usman, Tayfun Akyurek Jul 2026

Higher-Order Statistical Analysis Of Inter-Arrival Times For Radiation Detector Deadtime Characterization And Paralysis Factor Determination, Abdallah Wazzan, Shoaib Usman, Tayfun Akyurek

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

All real detectors exhibit hybrid behavior that combines both paralyzable and non-paralyzable which requires improved characterization techniques. This study investigates the relationship between detector deadtime parameters and higher-order statistical for inter-arrival time distributions to develop advanced detector characterization. Two comprehensive Monte Carlo simulation approaches were employed using MATLAB: a full radioactive decay curve analysis spanning approximately 4.5 half-lives of Cobalt-60 and Vanadium-52 sources, and a fixed count rate analysis covering practically achievable laboratory conditions (440 to 1,000,000 counts per second). The hybrid deadtime model was implemented with deadtimes ranging from 2.5 to 50 μs for the full simulation and from …

Go to article

A System Dynamics Model For Analyzing Customer Satisfaction Drivers In A Manufacturing Context, Mahnaz Asgari Sooran, Venkat Allada, Adewole Adegbola Jul 2026

A System Dynamics Model For Analyzing Customer Satisfaction Drivers In A Manufacturing Context, Mahnaz Asgari Sooran, Venkat Allada, Adewole Adegbola

Engineering Management and Systems Engineering Faculty Research & Creative Works

Customer satisfaction offers economic benefits and competitive advantage to manufacturing enterprises. However, a gap exists in understanding how to achieve customer satisfaction due to the complexities involved in coordinating various subsystems of an enterprise in an efficient manner. In this paper, we identified four internal and external-to-the-firm customer satisfaction drivers which include: government policies, supply chain reliability, knowledge management, and manufacturing performance criteria such as on-time delivery, quality and cost. We then developed a conceptual framework to define the non-linear mathematical relationships between drivers using system dynamics modeling. We conducted "what-if "scenario analyses for a base case, optimistic case and …

Go to article

Existence And Uniqueness Of Positive Solutions For Hilfer–Hadamard-Type Fractional Differential Equations With Γ-Concave And Sub-Homogeneous Operators, Hasan Rasouli, Hojjat Afshari, Martin Bohner Jul 2026

Existence And Uniqueness Of Positive Solutions For Hilfer–Hadamard-Type Fractional Differential Equations With Γ-Concave And Sub-Homogeneous Operators, Hasan Rasouli, Hojjat Afshari, Martin Bohner

Mathematics and Statistics Faculty Research & Creative Works

In this research, we present necessary and sufficient conditions for the existence and uniqueness of positive solutions for a class of Hilfer–Hadamard-type fractional differential equations with boundary value problems, including those with integral boundary conditions. The obtained results are conditional on a specific set of strong assumptions, which substantially narrow the class of admissible nonlinearities, coefficients, and boundary data. Thus, the present work extends the Hadamard-type framework to the Hilfer–Hadamard setting only within this restrictive regime, rather than providing a full extension to all Hilfer–Hadamard systems. We utilize the properties of (Formula presented.) -concave and sub-homogeneous operators along with two …

Go to article

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett Jul 2026

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The martensitic and magnetic transformations, as well as the mechanical properties, of Ni₂MnAl alloys in as-cast (AC) and heat-treated (HT) conditions were investigated. Magnetic-field-induced strain was evaluated via magnetostriction, with reversible strains of 0.14% and 0.2% achieved in the martensitic phase at 2 K for the AC and HT alloys, respectively. Transformation temperatures and Curie temperatures were determined under constant applied magnetic field, revealing that γ-phase inclusions in the AC microstructure suppress antiferromagnetic domain response, yielding a lower magnetization (∼8.4 emu g⁻¹) compared to the HT alloy (∼13.4 emu g⁻¹). Both alloys exhibited hysteretic behavior in the martensitic state and …

Go to article

Tailoring Crushing Responses Of Hexagonal Crash Box Filled With Additively Manufactured Lattice Structures By Assessing The Influence Of Material Parameters, L. D. Lumanauw, A. Jusuf, M. H. Jarwadi, L. Gunawan, T. Sebaey, A. Yudhanto Jul 2026

Tailoring Crushing Responses Of Hexagonal Crash Box Filled With Additively Manufactured Lattice Structures By Assessing The Influence Of Material Parameters, L. D. Lumanauw, A. Jusuf, M. H. Jarwadi, L. Gunawan, T. Sebaey, A. Yudhanto

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hexagonal crash boxes offer superior crashworthiness compared to other cross-sectional geometries, and their performance can be further enhanced by integrating additively manufactured lattice fillers. This study investigates the quasi-static crushing behavior of hexagonal crash boxes filled with hexagonal close-packed (HCP) lattice structures fabricated via stereolithography (SLA). Finite element models developed in ABAQUS/Explicit, validated against quasi-static compression experiments, show discrepancies below 5%, indicating that polymeric lattice fillers provide modest performance gains, achieving a crushing force efficiency (CFE) of 20%–25%. Replacing polymeric lattices with metallic fillers, namely 316L stainless steel and Ti–6Al–4V titanium alloy, substantially increases energy absorption, with Ti–6Al–4V delivering the …

Go to article

Nascent Titanium-/Silicon-Containing Particle Formation In Corona-Discharge-Assisted Combustion, Chanakya Bagya Ramesh, Frank Daoru Han, Yang Wang Jul 2026

Nascent Titanium-/Silicon-Containing Particle Formation In Corona-Discharge-Assisted Combustion, Chanakya Bagya Ramesh, Frank Daoru Han, Yang Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Adding plasmas to a flame has been shown to introduce high concentrations of charges, ions, and radicals to the said flame. This technique of adding plasma to a flame is called plasma-assisted combustion (PAC), and this addition has been shown to make a flame more stable and efficient. At the same time, PAC has also been shown to alter particle formation during combustion. Here, we investigate the effect of a high-frequency (∼21 kHz) alternating current (AC) corona discharge on particle formation and growth in a premixed flame, especially at the initial stages (with particle sizes below 10 nm). We first …

Go to article

Unveiling Corrosion Behavior And Passive Film Performance Of L12-Strengthened Ni28cr15cu8ti8fe26-Xco15+X Multi-Principal Element Alloys, Liran Huang, Zhiqiang Fu, Chenliang Chu, Shiyu Liu, Xiaohui Qin, Yunzhu Shi, Yongxiang Tan, Haiming Wen Jul 2026

Unveiling Corrosion Behavior And Passive Film Performance Of L12-Strengthened Ni28cr15cu8ti8fe26-Xco15+X Multi-Principal Element Alloys, Liran Huang, Zhiqiang Fu, Chenliang Chu, Shiyu Liu, Xiaohui Qin, Yunzhu Shi, Yongxiang Tan, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

L12 precipitates are usually induced into face-centered cubic (FCC) multiple-principal element alloys (MPEAs) to improve their moderate yield strength; however, the precipitation also influences the corrosion resistance. This study investigated the corrosion behavior and passive film performance of a series of L12-strengthened Ni28Cr15Cu8Ti8Fe26-xCo15+x (x = 0, 3, 6, and 9 at.%) MPEAs in 3.5 wt.% NaCl solution. The size and density of the L12 nanoprecipitates were regulated via tuning Fe and Co content. With decreasing Fe/Co ratio, the radii of these nanoprecipitates gradually increased within the …

Go to article

Thermal And Mechanical Properties Of Zirconium Carbide Manufactured Via Ceramic On-Demand Extrusion, Clare Sabata, Yue Zhou, Jeremy L. Watts, Gregory E. Hilmas Jul 2026

Thermal And Mechanical Properties Of Zirconium Carbide Manufactured Via Ceramic On-Demand Extrusion, Clare Sabata, Yue Zhou, Jeremy L. Watts, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Zirconium carbide (ZrC) was fabricated by material extrusion additive manufacturing (AM) followed by pressureless sintering at 2000°C for two hours, achieving a relative density of 90.3 %. SEM analysis revealed grains of 4.6 ± 1.8 μm; XRD confirmed single phase ZrC. A stoichiometry of ZrC0.92 was determined by XPS. Four-point flexure testing exhibited a strength of 331.3 ± 57.1 MPa and Young's modulus of 232.8 ± 13.1 GPa. Vickers hardness was 13.6 ± 1.0 GPa and 11.6 ± 0.5 GPa at 4.91 and 9.81 N, respectively. Indentation fracture resistance was 2.9 ± 0.2 MPa⋅m1/2; Griffith analysis confirmed …

Go to article

Comparative Catalytic Pyrolysis Of Wheat Straw For Enhanced Bio-Oil Production, Nourhan H. Khashaba, Noura F. Abdelsalam, Hany A. Elazab, Mamdouh A. Gadalla, Thokozani Majozi, Fatma H. Ashour Jul 2026

Comparative Catalytic Pyrolysis Of Wheat Straw For Enhanced Bio-Oil Production, Nourhan H. Khashaba, Noura F. Abdelsalam, Hany A. Elazab, Mamdouh A. Gadalla, Thokozani Majozi, Fatma H. Ashour

Chemical and Biochemical Engineering Faculty Research & Creative Works

Catalytic fast pyrolysis of lignocellulosic biomass is a promising thermochemical route for producing renewable biofuels and value-added chemicals. Many African countries have abundant underutilized agricultural residues whose reuse can improve waste management while reducing reliance on fossil fuels. This study used wheat straw as a representative residue to examine how two catalysts—zinc oxide (ZnO) and cement kiln dust (CKD)—affect bio-oil yield and quality. Bench-scale experiments were performed in a fixed-bed reactor under an inert nitrogen atmosphere at 500–600 °C. Each catalyst was tested separately at loadings from 0 to 7 g per 500 g of biomass to evaluate impacts on …

Go to article

Managing Risks Under Nuclear Power Plant Projects: A Latent Similarity-Guided Contract Customization, Mariam Elazhary, Islam H. El-Adaway Jul 2026

Managing Risks Under Nuclear Power Plant Projects: A Latent Similarity-Guided Contract Customization, Mariam Elazhary, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Global energy is transforming, with nuclear power emerging as a pivotal player in achieving sustainable and low-carbon energy goals. The nature of nuclear technology introduces unique challenges, such as stringent safety and environmental requirements. Existing studies focus on general risk identification, such as supply chain delays, cost overruns, and public perception issues. However, these studies fail to address integrating these risks into tailored contractual provisions, which are critical for navigating the unique challenges of nuclear projects. The goal of this paper is to examine how standard construction contracts can be tailored to better accommodate the risks inherent in nuclear power …

Go to article

How Does Competitive Adsorption Between Vma And Pce Influence Yield Stress Of Cement Paste? A Novel Insight From Interparticle Forces And Percolation Threshold, Huamin Sun, Le Teng, Xiaohan Yu, Xin Shu, Zhangli Hu, Jiaping Liu, Kamal H. Khayat Jul 2026

How Does Competitive Adsorption Between Vma And Pce Influence Yield Stress Of Cement Paste? A Novel Insight From Interparticle Forces And Percolation Threshold, Huamin Sun, Le Teng, Xiaohan Yu, Xin Shu, Zhangli Hu, Jiaping Liu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Viscosity modifying admixture (VMA) and polycarboxylate superplasticizer (PCE) are often combined to optimize rheological properties of cement-based materials. However, the competitive adsorption of these complex admixtures can greatly influence rheological properties. Many studies have investigated the variation of yield stress due to competitive adsorption between VMA and PCE; but the mechanisms are not fully understood. This study aims to shed a new light on this question in cement paste systems prepared with low water-to-binder ratios of 0.16–0.30. The competitive adsorption of VMA and PCE was quantitatively assessed using the Total Organic Carbon and Ultraviolet-Visible Spectroscopy measurements. The effect of competitive …

Go to article

Multi-Parametric Nonlinear Programming For Lossy Lmp Sensitivity Analysis Using Outer Progressive Cuts, Yuhan Huang, Tao Ding, Chenggang Mu, Rui Bo, Pengwei Du Jul 2026

Multi-Parametric Nonlinear Programming For Lossy Lmp Sensitivity Analysis Using Outer Progressive Cuts, Yuhan Huang, Tao Ding, Chenggang Mu, Rui Bo, Pengwei Du

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate sensitivity analysis of locational marginal price (LMP) is crucial for risk hedging and market management. This paper proposes multiparametric nonlinear programming for sensitivity analysis of LMP with nonlinear network loss, also known as lossy LMP. Global analytical solutions for lossy LMP and the corresponding critical regions are derived. An outer progressive cut algorithm is developed to constrain the network loss error within a specific range for the whole parametric domain. Case studies show the improved accuracy over methods with lossless or fixed loss factors, and a two-order-of-magnitude online speedup over Monte Carlo methods while maintaining lower total computational time.

Go to article

Distinct Regulatory Dna Methylation Signatures Across Multiple Sclerosis, Neuromyelitis Optica, And Neurological Post-Acute Sequelae Of Covid-19, Syed Ilyas Munzir, Daniel B. Hier, Michael D. Carrithers Jul 2026

Distinct Regulatory Dna Methylation Signatures Across Multiple Sclerosis, Neuromyelitis Optica, And Neurological Post-Acute Sequelae Of Covid-19, Syed Ilyas Munzir, Daniel B. Hier, Michael D. Carrithers

Electrical and Computer Engineering Faculty Research & Creative Works

Background/Objectives: Our prior epigenome-wide association study (EWAS) on multiple sclerosis (MS) identified myeloid-associated methylation signatures and an association with enhancer regions. Here we compared differential DNA methylation across three central nervous system inflammatory disorders: MS, neuromyelitis optica (NMO), and neurologic post-acute sequelae of COVID-19 (neuro-PASC). Methods: Whole-blood DNA was profiled on Infinium MethylationEPIC arrays. Analyses included EWAS at the CpG level, differentially methylation region (DMR) analysis, and gene regulatory-element enrichment using Locus Overlap Analysis (LOLA). Limma linear models were adjusted for race, EPIC array version, age, sex, disease-modifying treatment class, and blood cell composition. Results: All three diseases were associated …

Go to article

Nb–Zr Interdiffusion In The (Hf,Ta,Ti,Nb)B2–(Hf,Ta,Ti,Zr)B2 High-Entropy Boride System, Ana C. Feltrin, Yue Zhou, Stefano Curtarolo, Gregory E. Hilmas, William G. Fahrenholtz Jul 2026

Nb–Zr Interdiffusion In The (Hf,Ta,Ti,Nb)B2–(Hf,Ta,Ti,Zr)B2 High-Entropy Boride System, Ana C. Feltrin, Yue Zhou, Stefano Curtarolo, Gregory E. Hilmas, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Niobium (Nb) presents a challenge for achieving homogeneous solid solutions in high-entropy boride and carbide ceramics. In this work, we synthesized (Hf,Ta,Ti,Zr)B2 (Zr-HEB) and (Hf,Ta,Ti,Nb)B2 (Nb-HEB) ceramics by boro/carbothermal reduction, followed by densification via spark plasma sintering (SPS). Diffusion couples were prepared to investigate the interdiffusion behavior of Nb and zirconium (Zr) in these complex systems at temperatures between 2000°C and 2200°C. Aside from Nb and Zr, the other elements exhibited no significant concentration gradient across the diffusion interface. Nb exhibited lower diffusion coefficients ((Formula presented.) Nb = 1.7 x 10−17–1.2 x 10−16 m2 …

Go to article

Vehicle Autonomy To Ecosystem Intelligence: A Systematic Review Of Dynamic Vision Architectures In Surface Mining Operations, Nana Yaa Damtewaa Anti, Samuel Frimpong, Muhammad Azeem Raza Jul 2026

Vehicle Autonomy To Ecosystem Intelligence: A Systematic Review Of Dynamic Vision Architectures In Surface Mining Operations, Nana Yaa Damtewaa Anti, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Autonomous Haulage Systems (AHS) have significantly transformed surface mining operations by improving safety, productivity, and operational consistency. Currently, AHS predominantly rely on vehicle-centric perception architectures. Onboard LiDAR, radar, cameras, and Global Navigation Satellite Systems (GNSS) perform sensing, interpretation, and decision-making within individual systems. These processes enable collision avoidance and path tracking. However, they are limited in their ability to consider the broader, dynamic mining environment characterized by dust, terrain degradation, geotechnical instability, heterogeneous traffic, and rapidly evolving operational conditions. This paper presents a systematic review of dynamic vision systems of AHS in surface mining. It critically analyzes the transition from …

Go to article

Finite-Temperature Grain-Boundary Segregation In High-Entropy Carbides, Marium M. Mou, Tarek Md Anamul Haque, Samuel E. Daigle, Josiah Roberts, William G. Fahrenholtz, Jon Paul Maria, Douglas E. Wolfe, Eva Zurek, Stefano Curtarolo, Donald W. Brenner Jul 2026

Finite-Temperature Grain-Boundary Segregation In High-Entropy Carbides, Marium M. Mou, Tarek Md Anamul Haque, Samuel E. Daigle, Josiah Roberts, William G. Fahrenholtz, Jon Paul Maria, Douglas E. Wolfe, Eva Zurek, Stefano Curtarolo, Donald W. Brenner

Materials Science and Engineering Faculty Research & Creative Works

High-entropy carbides are promising candidates for extreme-temperature environments, but their grain-boundary chemistry remains difficult to resolve because segregation involves both chemical disorder and finite-temperature configurational sampling. Here, we quantify temperature-dependent grain-boundary segregation in high-entropy carbides using a universal message-passing atomic cluster expansion (MACE) machine learning interatomic potential combined with a hybrid Monte Carlo–molecular dynamics workflow. A 53.1 (Formula presented.) (Formula presented.) symmetric tilt grain boundary was sampled for six representative high-entropy carbide compositions containing group IV, V, and VI transition metals at 300 and 2000 K. Element-resolved metal-sublattice composition profiles reveal composition-dependent segregation modes. Several chemistries exhibit selective near-boundary enrichment …

Go to article

Hsv-1 Us3 Hijacks Conserved Actin Regulatory Complexes To Drive F-Actin Remodeling, Md Imran Hossain, Md Arifuzzaman, Md Mehedi Hasan, Seung Jong Park, Leila Rahimian, Ojasvi Dutta, Vladimir Chouljenko, Harikrishnan Mohan, Reza Ghavimi, Konstantin G. Kousoulas Jul 2026

Hsv-1 Us3 Hijacks Conserved Actin Regulatory Complexes To Drive F-Actin Remodeling, Md Imran Hossain, Md Arifuzzaman, Md Mehedi Hasan, Seung Jong Park, Leila Rahimian, Ojasvi Dutta, Vladimir Chouljenko, Harikrishnan Mohan, Reza Ghavimi, Konstantin G. Kousoulas

Computer Science Faculty Research & Creative Works

The herpes simplex virus 1 (HSV-1) US3 is a multifunctional serine/threonine kinase that promotes HSV-1 replication and spread. But its role and the mechanisms by which US3 regulates actin cytoskeletal remodeling remain poorly defined. We combined flow cytometry, confocal microscopy, immunoprecipitation-mass spectrometry (IP-MS), protein complex mapping, and machine learning to characterize US3-mediated F-actin dynamics. Flow cytometry and confocal microscopy showed that wild-type HSV-1 induces significant F-actin remodeling, while the ΔUS3 mutant displays F-actin levels comparable to uninfected cells, identifying US3 as a key regulator. IP-MS identified 47 high-confidence US3 interactors enriched in conserved actin regulatory complexes, including Arp2/3 nucleation machinery, …

Go to article

A Comparative Evaluation Of Experimentally Validated Finite Element Modeling Strategies To Simulate Compression-After-Impact Behavior Of Multidirectional Cfrp Laminates With Barely Visible Impact Damage, Niildiip Chandraa, Vinh Tung Le, Arief Yudhanto, Abhendra K. Singh, Douglas E. Smith Jul 2026

A Comparative Evaluation Of Experimentally Validated Finite Element Modeling Strategies To Simulate Compression-After-Impact Behavior Of Multidirectional Cfrp Laminates With Barely Visible Impact Damage, Niildiip Chandraa, Vinh Tung Le, Arief Yudhanto, Abhendra K. Singh, Douglas E. Smith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Abstract The finite element-based approaches to predict compression-after-impact (CAI) performance of carbon fiber reinforced polymer (CFRP) subject to a low-velocity impact rely on assumptions about compressive failure mechanisms within the barely visible impact damage (BVID). Comprehensive evaluations of finite element (FE) models concerning accuracy, efficiency, and validity with respect to experimental tests are limited. This study explores several finite element-based approaches developed in ABAQUS Explicit to predict the residual strength and related compressive failure mechanisms of multidirectional CFRP laminates. Drop-weight impact experiments followed by CAI tests employing 3D Digital Image Correlation (DIC) were used to validate our FE models by …

Go to article

Thiol-Based Neuroprotective Copolymers Acutely Restore Redox Metabolism And Mediate Vasogenic Edema In A Mouse Model Of Traumatic Brain Injury, Evan T. Curtis, Brandon Z. Mcdonald, Aria W. Tarudji, Aaron M. Priester, Anthony J. Convertine, Forrest M. Kievit Jul 2026

Thiol-Based Neuroprotective Copolymers Acutely Restore Redox Metabolism And Mediate Vasogenic Edema In A Mouse Model Of Traumatic Brain Injury, Evan T. Curtis, Brandon Z. Mcdonald, Aria W. Tarudji, Aaron M. Priester, Anthony J. Convertine, Forrest M. Kievit

Materials Science and Engineering Faculty Research & Creative Works

Effective pharmaceutical interventions for treating the secondary damage associated with traumatic brain injury (TBI) are limited due to poor delivery into the brain, insufficient target engagement, and an incomplete understanding of the pathophysiological changes that occur post-impact. Thus, nanoparticles (NP), which have an enhanced permeation and retention-like effect within the perturbed blood-brain barrier, have grown as a potential candidate for treating TBI. We have investigated the antioxidant capacity of thiol-based NP, termed neuroprotective copolymers (NPC3), and their ability to neutralize reactive oxygen species (ROS) and lipid peroxidation products (LPOx). Here, we assessed the efficacy of NPC3 for alleviating the secondary …

Go to article

Coupled Multiphysics Transport-Reaction Modeling Framework For Combustion Synthesis Of Cement Phases: Insights Into Β-C2s Formation And Wavefront Dynamics, Sayee Srikarah Volaity, Shubham Agrawal, Aditya Kumar, Narayanan Neithalath Jun 2026

Coupled Multiphysics Transport-Reaction Modeling Framework For Combustion Synthesis Of Cement Phases: Insights Into Β-C2s Formation And Wavefront Dynamics, Sayee Srikarah Volaity, Shubham Agrawal, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Biofuel-based combustion synthesis (BCS) processes offer low-temperature, low-carbon routes to lime and clinker production. However, they involve tightly coupled interactions between heat transfer, gas flow, and sequential solid-state reactions within reactive pellets. Experiments typically provide surface temperature evolution and final phase assemblages but give limited insight into the conversion process and the interaction between composition and process conditions. A coupled transport-reaction framework is developed here to resolve this limitation─the synthesis of β-C2S (belite), a major cementing phase, serving as an example. Transient conservation equations for energy, momentum, and species are solved for a porous pellet exchanging heat and mass with …

Go to article

Characteristics And Microscopic Mechanisms Of Nsep-Modified Asphalt With Reduced Fume Emission And Enhanced Environmental Benefits, Yiliang Li, Jianguo Wei, Anmin Zou, Jinming Li, Jenny Liu, Di Wang, Xuan Xiao, Yuming Zhou Jun 2026

Characteristics And Microscopic Mechanisms Of Nsep-Modified Asphalt With Reduced Fume Emission And Enhanced Environmental Benefits, Yiliang Li, Jianguo Wei, Anmin Zou, Jinming Li, Jenny Liu, Di Wang, Xuan Xiao, Yuming Zhou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Toxic fumes emitted during the construction and maintenance of hot-mix asphalt mixtures represent a significant challenge for both the environment and construction workers. To reduce the generation of these toxic fumes, nano-sepiolite (NSEP, a natural mineral) powder was incorporated into base asphalt (BA), styrene-butadiene-styrene (SBS) -modified asphalt (SBSA), and crumb rubber-modified asphalt (CRA) to formulate sepiolite-modified asphalt binders. The rheological properties of these NSEP-modified asphalts were evaluated using dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests. Subsequently, smoke density tests and gas chromatography-mass spectrometry (GC-MS) were utilized to analyze the quantity and composition of the volatile organic compounds …

Go to article

Label-Flip Attack Detection Via Trust-Weighted Aggregation In Federated Learning For Underground Mine Security, Md Sazedur Rahman, Sanjay Madria, Samuel Frimpong Jun 2026

Label-Flip Attack Detection Via Trust-Weighted Aggregation In Federated Learning For Underground Mine Security, Md Sazedur Rahman, Sanjay Madria, Samuel Frimpong

Computer Science Faculty Research & Creative Works

Underground mining operations are increasingly dependent on autonomous vehicles, robotic drilling systems, and intelligent inspection platforms operating in confined, GPS-denied tunnel environments. These systems rely on distributed perception models to interpret navigation cues, hazard warnings, and environmental signals in real time. While centralized deep learning can enhance model performance, transferring raw operational data across mining sites introduces serious confidentiality and security risks. Federated Learning (FL) offers a privacy-preserving alternative by enabling collaborative model training without sharing local datasets. However, deploying FL in underground mining introduces several critical challenges: (i) Training labels may be modified either maliciously by compromised clients or …

Go to article

Rheological Protocol To Assess And Optimize Latex Coagulation Dynamics For The Thin Glove Coagulant Dipping Process, Monday U. Okoronkwo, Kok Kong Ng, Wolfram Franke, Gaurav Sant Jun 2026

Rheological Protocol To Assess And Optimize Latex Coagulation Dynamics For The Thin Glove Coagulant Dipping Process, Monday U. Okoronkwo, Kok Kong Ng, Wolfram Franke, Gaurav Sant

Chemical and Biochemical Engineering Faculty Research & Creative Works

Many products that directly impact the quality of human life today — gloves, catheters, condoms, and baby bottle teats — are made through the latex-dipping technology. While a variety of methods have been developed – e.g., particle counting, turbidimetry, microscopy, and light scattering – which are suitable for studying the coagulation of latex at very low concentrations, much less work has focused on methods suitable for in-situ characterization of latex coagulation in concentrated solutions (e.g., as relevant to the dipping process). This paper presents a process-relevant rheological protocol for assessing and optimizing latex coagulation dynamics for the thin glove coagulant …

Go to article

High-Throughput Optical Analysis To Inform Design Of Electrochemical Biosensors, Nathan J. Ricks, Michael A. Pence, Monica Brachi, Shelley D. Minteer Jun 2026

High-Throughput Optical Analysis To Inform Design Of Electrochemical Biosensors, Nathan J. Ricks, Michael A. Pence, Monica Brachi, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

Electrochemical biosensors are central to wearable diagnostics, point-of-care testing, and continuous health monitoring due to their low power requirements, compatibility with miniaturized electronics, and proven clinical impact. Despite these advantages, the development of new electrochemical biosensors remains slow, constrained by limited throughput, complex electrode–biomolecule interfaces, and challenges associated with selectivity and performance in chemically complex environments. This perspective outlines how the next generation of electrochemical biosensors can be enabled by decoupling high-throughput front-end discovery and optimization from electrochemical readouts using nonelectrochemical surrogate assays. Optical, affinity, and cell-sorting platforms, including SELEX, fluorescence-activated cell sorting, and chemically coupled fluorescence assays, allow orders-of-magnitude …

Go to article

Data-Driven Electrochemistry Reveals The Impact Of Hydrophobicity On Aptamer Cross-Reactivity, Emily Carroll, Michael A. Pence, Elizabeth Winterholler, Taylor D. Sparks, Shelley D. Minteer Jun 2026

Data-Driven Electrochemistry Reveals The Impact Of Hydrophobicity On Aptamer Cross-Reactivity, Emily Carroll, Michael A. Pence, Elizabeth Winterholler, Taylor D. Sparks, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

Electrochemical aptamer-based (E-AB) biosensors offer a promising platform for reagentless detection of molecular targets, yet aptamer recognition can be limited by cross-reactivity, particularly for hydrophobic analytes such as steroid hormones. To investigate how cross-reactivity influences E-AB sensor performance, we use automation and machine learning to screen a library of possible interferent molecules against a steroid-binding aptamer, with progesterone serving as a physiologically relevant test case. Here, we develop a label-free E-AB sensor for progesterone detection using a methylene blue-modified aptamer anchored with a hexanethiol linker. We then used an automated electrochemistry platform to perform reproducible and high-throughput characterization of our …

Go to article

Interseismic Creep Along The Enriquillo–Plantain Garden Fault, Haiti, Estimated From Insar, Rishabh Dutta, Jeremy L. Maurer, Yi Chieh Lee Jun 2026

Interseismic Creep Along The Enriquillo–Plantain Garden Fault, Haiti, Estimated From Insar, Rishabh Dutta, Jeremy L. Maurer, Yi Chieh Lee

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Enriquillo–Plantain Garden fault zone (EPGFZ) is a major left-lateral strike-slip fault in southern Haiti hosting several recent destructive earthquakes, including the 2021 MW 7.1 Nippes event with primary thrust-slip. To investigate how strain is accommodated in the vicinity of the 2021 event, we analyzed Sentinel-1 interferometric synthetic aperture radar (InSAR) data from 2017 to 2021 using a PS + DS (persistent + distributed scatterers) InSAR time-series approach to overcome decorrelation in this highly vegetated region. We reveal interseismic creep along the EPGF and adjacent Grand'Anse–Sud border faults, with pure strike-slip mechanism and rates up to 9 mm/yr. We suggest …

Go to article

First Prev Next Last