Digital Commons Network^™

Trust And Procedural Justice Mediate The Effects Of Ai Hiring On Organizational Attraction And Intent To Apply, Amaneh Babaee, Daniel Burton Shank

Psychological Science Faculty Research & Creative Works

The growing emphasis on human capital has made it more critical for organizations to effectively attract, select, hire, onboard, utilize, and retain talent. While the integration of AI in recruitment offers unprecedented efficiency, scalability, reduced human bias, and optimized talent acquisition, its introduction generates challenges that may influence applicants' perceptions and behavioral intentions. Based on signaling and organizational justice theories, the lack of human relational cue and AI's transparency algorithms may lead job applicants to wonder whether the hiring process is trustworthy and procedurally just. Such challenges may alter not only how applicants interpret organizational values, but also whether they …

Effects Of Wc Additions On The Phase Formation Of (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 High Entropy Dual Phase Ceramics, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

High entropy dual phase (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 ultra-high temperature ceramics were produced from powders synthesized by boro-carbothermal reduction. Systematic additions of 2.5 wt%, 5 wt%, and 10 wt% WC were incorporated after powder synthesis. Additions of 2.5 wt% and 5 wt% WC dissolved into the host ceramics, resulting in complete solid solution formation and nearly full densification. In contrast, a secondary monoboride phase evolved for the composition with 10 wt% WC, in addition to the main high entropy carbide and diboride phases. Thermodynamic analysis revealed that WB formation was favorable for WC additions in the presence of metal diborides at the sintering …

Micro/Nanomechanical Properties Of Top-Seeded Melt Grown Ybco Single Crystals Determined Using Depth Sensing Indentation, Ugur Kolemen, Cafer Mert Yesilkanat, Fikret Yilmaz, Fatih Dogan, Orhan Uzun

Materials Science and Engineering Faculty Research & Creative Works

Mechanical properties of the bulk YBa2Cu3O7-x (YBCO) single crystal superconductor, prepared by using the Top Seeded Melt Growth (TSMG) method, were determined. Property measurements were conducted by the nanoindentation method under various loads and the micro indentation method at different temperatures. Hardness (H) and reduced elastic modulus (Er) values were calculated by using the Oliver–Pharr method. According to hf/h max values found from load- displacement curves, there is a sink in behavior around outer rim of the indents that was confirmed by atomic force microscopy (AFM) analysis. Nanoindentation analyses conducted on upper section, middle section and subsection revealed that all …

Variable-Temperature Plasmonic High-Entropy Carbides, Simon Divilov, Sean D. Griesemer, Robert C. Koennecker, Michael J. Ammendola, Adam C. Zettel, Hagen Eckert, Jeffrey R. Shallenberger, Xiomara Campilongo, William G. Fahrenholtz, Arrigo Calzolari, Douglas E. Wolfe, Stefano Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Effective thermal management at variable and extreme temperatures face limitations for the development of novel energy and aerospace applications. Plasmonic approaches, shown to be capable of tailoring black-body emission, could be effective if materials with high-temperature and tunable plasmonic resonance were available. Here, we report a synergy between experimental and theoretical results proving that many high-entropy transition metal carbides, consisting of four or more metals at equal molar ratio, have plasmonic resonance at room, high (>1000∘C) and variable temperatures. We also found that these high-entropy carbides can be tuned and show considerable plasmonic thermal cycling stability. This paradigm-shift approach …

Thermal Properties Of High Entropy Dual Phase (Hf,Nb,Ta,Ti,Zr,)C-(Hf,Nb,Ta,Ti,Zr)B2 Ceramics: Comparison With The High Entropy Single-Phase Ceramics And The Effect Of Wc Additions, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

The heat capacity, thermal diffusivity and thermal conductivity of (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B₂ high entropy dual phase ceramics were evaluated from room temperature to 1800 °C and compared with the constituent high entropy single phase ceramics of the same nominal compositions. Thermal conductivity of the (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B₂ dual phase ceramic increased from 17.7 W m⁻¹ K⁻¹ at room temperature to 54 W m⁻¹ K⁻¹ at 1800 °C. The addition of WC to the dual phase ceramic reduced its thermal conductivity. For the addition of 5 wt% WC, room temperature thermal conductivity was 16.8 W m⁻¹ K^{−1 …}

Effect Of Powder Recycling On Powder Characteristics And Mechanical Properties Of Materials Produced By Laser Powder Bed Fusion (Lpbf): A Review, Mihiretu Ganta, Marta Kurek, Arezoo Emdadi, Tadeusz Łagoda, Marek Pagáč

Materials Science and Engineering Faculty Research & Creative Works

As the Laser powder bed fusion (LPBF) process advances toward industrial-scale production, the sustainability of metal powder feedstocks has become a focal point of research. The powder recycling approach, while environmentally and economically favorable, results in a series of physicochemical variations that could compromise the part quality. The resulting variation in powder characteristics with powder recycling could affect the powder layer density and melt pool dynamics, resulting in defect formation and hindering the structural integrity of LPBFed parts. These alterations pose significant constraints to mechanical performance, particularly in fatigue-sensitive applications where even minor imperfections can substantially reduce service life. The …

Method To Measure Blast Overpressure Exposure On Military Personnel Using Orthogonal Sensor Orientations, Nicholas W. Kuehl, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Measuring and recording blast exposure to military personnel from shoulder-fired weaponry or improvised explosive devices to correlate health outcomes like mild traumatic brain injury has been a goal for many years. To ensure overpressure is recorded, sensor manufacturers either recommend multiple sensors on different parts of the body or have integrated multiple sensors into one unit. Despite this, knowing the sensor orientation in relation to the blast source is important to know if it's a head on, side on or oblique pressure recording. This research investigates whether pressures recorded at three independent orientations in the x, y and z planes …

Time-Resolved 3d Momentum Spectroscopy In Continuous Wave Atomic Photoionization Experiments, K. L. Romans, B. P. Acharya, A. H.N.C.De Silva, K. Foster, O. Russ, Daniel Fischer

Physics Faculty Research & Creative Works

An experimental continuous-wave (cw) pump-probe scheme is demonstrated by investigating the population and photoionization dynamics of an atomic system. In particular, 6Li atoms are initially prepared in optically pumped 22S1/2 and 22P3/2 states before being excited via multi-photon absorption from a tunable femtosecond laser. The subsequent cascade back to the ground state is analyzed by ionizing the atoms in the field of a cw optical dipole trap laser. Conventional spectroscopic methods, such as standard cold-target recoil ion momentum spectroscopy or velocity map imaging, cannot provide simultaneous momentum and time-resolved information on an event-by-event basis for the system investigated here. The …

Data Center Composite Load Model Parameters’ Tuning, Mohammed Sleiman, Amirreza Sahami, Oluwatimilehin Adeosun, Nathaniel Rice, Katelyn Vance

Electrical and Computer Engineering Faculty Research & Creative Works

The vast expansion of data center campuses has created concentrated and highly dynamic electrical loads that challenge traditional transmission system planning and protection studies. This paper presents a novel approach to model the load of data centers and validate their dynamic performance in a composite-load-model (CMLD) framework.

The data center has three major modules: a static element representing the static devices and busway impedance; an electronic-based element constituting power converters such as rectifiers and inverters, associated power supplies, and a motor-based element encompassing the induction nature of chillers, fans and pumps. Each module represented equivalent algebraic and differential equations depicting …

Application Of Natural Language Processing And Machine Learning For Analyzing Mining Accident Reports And Automating The Process Of Root Cause Analysis, Siddhartha Agarwal, Y. P. Chugh, Atul Singh, Vikram Sakinala, Ayan Mukherjee, Balbir Prasad, Cihan Dagli, Yuhao Zou

Engineering Management and Systems Engineering Faculty Research & Creative Works

Coal mining accidents are a major concern worldwide, necessitating effective safety measures and comprehensive analysis to prevent future accidents. Our proposed solution is the first attempt for Indian mines, inspired by the potential of Natural Language Processing (NLP) that can read and analyze vast repositories of accident records in seconds. In combination with machine learning (ML), NLP algorithms can extract unstructured text by eliminating manual data entry errors, reading poorly scanned reports, and understanding multiple versions of the event and cluster documents based on types that would otherwise take months to collate. In the case of accident records, it can …

Local Hydrodynamics And Phase Distribution In Large-Scale Trickle Bed Reactors Using Multi-Detector Γ-Ray Densitometry, Sebastián Uribe, Ahmed Jasim, Saba A. Gheni, Nora Selem, Nouhaila Filali, Tiberiu M. Leib, Sourav Sengupta, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study presents a new approach of using gamma ray computed tomography (CT) in a form of arc multi-detector γ-Ray Densitometry (Arc MD-GRD) Technique where it measures the line averaged holdups of the phases which are projected on the diameter of the column to obtain their diameter profiles. This technique then was used to investigate the diameter profiles of the phases' holdups in a 12-inch diameter trickle bed reactor (TBR) using sulfur hexafluoride (SF6) as the gas phase to represent to a certain extent the industrial higher density of the used gas phase due to either the type of the …

Dendrimer Gel Nanoparticles With Dual-Targeting Of Upar And Ribonucleotide Reductase R2 Influence Necrosis, Apoptosis, And Cell Cycle Arrest In Triple-Negative Breast Cancer, Hsin Yin Chuang, Yue-Wern Huang, Hu Yang

Biological Sciences Faculty Research & Creative Works

Triple-negative breast cancer (TNBC) is an aggressive breast cancer subtype with limited treatment options due to the absence of estrogen (ER), progesterone (PR), and human epidermal growth factor receptor 2 (HER2) receptors. We previously developed highly adaptable polyamidoamine (PAMAM) dendrimer-based gel nanoparticles (GDP-uPA/GTI) with dual-targeting capabilities against urokinase-type plasminogen activator receptor (uPAR) and ribonucleotide reductase R2 (R2) to achieve selective antitumor effects. In this study, we investigated the underlying mechanisms of GDP-uPA/GTI-induced tumor inhibition. In vivo, GDP-uPA/GTI significantly downregulated R2 expression and activated caspase 8 and caspase 3, indicating caspase-dependent apoptosis. Histological evaluation of major organs revealed no observable toxicity. …

Draft Genome Sequences Of Four Phosphate-Solubilizing Microbes Of The Family Burkholderiaceae Isolated From Tailings From The Former Pea Ridge Mine In Washington County, Mo, Usa, Prince Oppong Amoh, Abiodun E. Idowu, Elizabeth R. Grube, Melanie R. Mormile, Hunter W. Schroer

Biological Sciences Faculty Research & Creative Works

We present draft genome sequences of four Gram-negative phosphate-solubilizing microbes isolated from Pea Ridge Mine tailings in Missouri, USA. Belonging to the family Burkholderiaceae, these isolates exhibit a phosphate-mineral-dissolving phenotype in liquid and solid cultures. Genome sizes span 5.6–9.7 Mb, with GC contents of 61.6%–67.0%.

Learning-Assisted Schedulability Analysis: Opportunities And Limitations, Sanjoy Baruah, Pontus Ekberg, Marion Sudvarg

Computer Science Faculty Research & Creative Works

We present the first (to our knowledge) Deep-Learning based framework for real-time schedulability-analysis that guarantees to never incorrectly mis-classify an unschedulable system as being schedulable, and is hence suitable for use in safety-critical scenarios. We relate applicability of this framework to well-understood concepts in computational complexity theory: membership in the complexity class NP. We apply the framework upon the widely-studied schedulability analysis problems of determining whether a given constrained-deadline sporadic task system is schedulable on a preemptive uniprocessor under both Deadline-Monotonic and EDF scheduling. As a proof-of-concept, we implement our framework for Deadline-Monotonic scheduling, and demonstrate that it has a …

Catalytic Synthesis Of Iron-Doped Graphitic Aerogels From Poly(Phloroglucinol-Terephthalaldehyde – Urethane) Precursors, Stephen Yaw Owusu, Rushi U. Soni, Chariklia Sotiriou-Leventis

Chemistry Faculty Research & Creative Works

We report a new class of graphitic carbon aerogel precursors based on iron oxide-doped poly(phloroglucinol-terephthalaldehyde–urethane) (T-POL/PU-FeOx) networks. The hybrid polymeric network incorporates a rigid aromatic triisocyanate, tris(4-isocyanatophenyl)methane, which reacts in situ with the hydroxyl groups of phloroglucinol to form a polyurethane-containing framework. Monolithic aerogels derived from this system undergo catalytic graphitization at significantly reduced temperatures (800–1500 °C) compared to conventional graphitization (2500–3300 °C). An oxidative ring fusion aromatization step (240 °C, air) prior to pyrolysis enhanced the degree of graphitization. The resulting graphitic aerogels were characterized by XRD, Raman spectroscopy, TGA, TEM, SEM, XPS, and N₂ sorption porosimetry. Compared to …

Fluorosilane-Induced Softening And Collapse Of Micropillar Arrays, Gabriela Moreira Lana, Maja Fehlberg, Petra Herbeck-Engel, Gisela Heppe, Raimund Schlüßler, Torsten Jähnke, Eduard Arzt, Roland Bennewitz

Chemical and Biochemical Engineering Faculty Research & Creative Works

Replica molding is a widely used technique for the fabrication of polymer microstructures. As structural dimensions decrease, anti-stick surface treatment of the mold becomes increasingly critical to ensure clean demolding and preserve structural integrity. We fabricated arrays of micropillars with 20 µm diameter and 60 µm height using medical-grade polydimethylsiloxane (PDMS), MDX4-4210, and observed a high fraction of collapsed pillars for the first molding after fluorosilanization of the mold to reduce sticking. To address this issue, we systematically investigated the surface treatment protocol for the molds, made from the PDMS Sylgard 184. We provide results from complementary measurement methods, to …

Simulating Realistic Lyman-𝛼 Emitters Including The Effect Of Radiative Transfer, Hasti Khoraminezhad, Shun Saito, Max Gronke, Chris Byrohl

Research Data

We present an empirical yet physically motivated simulation of realistic Lyman-𝛼 emitters (LAEs) at 𝑧 ∼ 2 − 3, crucial for ongoing and forthcoming cosmological LAE surveys. We combine an empirical UniverseMachine galaxy-halo model with a simple spherical expanding shell model for the Lyman-𝛼 radiative transfer, calibrating only three free parameters to simultaneously reproduce the observed Lyman-𝛼 luminosity function and the angular clustering. Our LAE model is further supported by its consistency with other observables such as the Lyman-𝛼 equivalent width distribution, the Lyman-𝛼 escape fraction as a function of stellar mass and dust reddening, and the systemic velocity offsets. …

Synergistic Doping And Coating Strategy For Boosting Na0.7mno2 Cathode Performance In Sodium-Ion Batteries, Ahmad Helaley, Han Yu, Manashi Nath, Xinhua Liang

Chemistry Faculty Research & Creative Works

Advancing sodium-ion battery (SIB) technology requires novel approaches to optimize cathode materials for improved electrochemical performance. In this study, we employ atomic layer deposition (ALD) to precisely modify the surface of P2-type Na_0.7MnO₂ cathodes with different coating materials including ZnO, NiO, and Al₂O₃, followed by post-annealing at 750°C for 10 hours. The strategic combination of ALD and thermal treatment can achieve thin film coating on particle surface and promote element doping into the near-surface lattice, as confirmed by electron energy loss spectroscopy (EELS) analysis. The incorporation of Zn, Al, and Ni results in …

Unraveling Hydration- And Temperature-Induced Structural Transformations Of Linear Poly(Ethylenimine) Using Raman Microscopy And Numerical Unmixing, Miharu Koh, Jay P. Kitt, Andrew D. Pendergast, Joel M. Harris, Shelley D. Minteer, Carol Korzeniewski

Chemistry Faculty Research & Creative Works

Linear poly(ethylenimine) (LPEI) is a hydration-sensitive polymer of interest for its breadth of application in areas that include medicine, energy, and materials science. To facilitate advances, this work demonstrates in situ Raman microscopy and self-modeling curve resolution (SMCR) analysis as an approach for investigating changes in LPEI structure during melting and crystallization under controlled heating and cooling conditions. With focus on neutral (freebase) LPEI, SMCR analysis of Raman data sets showed that the melting transition of anhydrous LPEI was well described by a pair of spectral vectors representing anhydrous crystalline and amorphous states. However, the transition from the melted to …

Comparative Study Of Interfacial Bond Strength Of Steel H-Pile With Ultra-High Performance And Polymer Concrete Jacket, Binod Shrestha, Mohanad M. Abdulazeez, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigates the bond behavior of steel H-pile encased in concrete jackets under push-out loading, considering the effects of concrete type and embedment length. Nine full-scale specimens were tested using three concrete types: ultra-high-performance concrete (UHPC), Methyl Methacrylate Polymer Concrete (MMA-PC), and conventional concrete (CC), with embedment lengths of 63.5 mm, 127 mm, and 190.5 mm. The experimental results revealed that MMA-PC jacket demonstrated the highest bond strength, though gains were marginal beyond 127 mm. UHPC exhibited superior tensile strength and ductility, preventing splitting failure. UHPC also displayed the highest interfacial fracture energy of 9.63 N/mm, exceeding MMA-PC and …

Connected-Component Labeling Using Hls For High-Energy Particle Physics Instruments, Nick Song, Marion Sudvarg, Roger Chamberlain

Computer Science Faculty Research & Creative Works

Many instruments used in high-energy particle physics observations, e.g., gamma-ray telescopes, use FPGAs for front-end signal processing of raw sensor data. The use of high-level synthesis (HLS) to express the signal processing algorithms has the potential to significantly reduce development time for new instruments of this type. We describe our experience with one of the computational stages in the signal processing pipeline, island detection, exploring its implementation across multiple configurations: 1D versus 2D islands, and 4-way versus 8-way connected-component labeling (CCL) in the 2D configuration. We report resource usage and performance for both configurations of 2D island detection, including the …

Modeling And Optimizing Real-Time Telescope Interaction For Multi-Wavelength Observation Of Gamma-Ray Bursts, Ye Htet, Marion Sudvarg, Honghao Yang, Jeremy Buhler, Roger Chamberlain, James Buckley

Computer Science Faculty Research & Creative Works

Multi-wavelength observation of gamma-ray bursts (GRBs) requires real-time interaction among multiple telescopes. A gamma-ray telescope detects and localizes a GRB in the sky and must then communicate with an optical telescope to direct the latter toward the GRB as quickly as possible. We previously developed software for ADAPT, a suborbital gamma-ray telescope, to localize GRBs in real time, on a timescale shorter than that of the GRB itself. This work therefore studies progressive localization, in which ADAPT computes a series of increasingly accurate location estimates during a GRB to enable a partner instrument to more rapidly find it. We describe …

Modular Architecture For High-Performance And Low Overhead Data Transfers, Rasman Mubtasim Swargo, Engin Arslan, Md Arifuzzaman

Computer Science Faculty Research & Creative Works

High-performance applications necessitate rapid and dependable transfer of massive datasets across geographically dispersed locations. Traditional file transfer tools often suffer from resource underutilization and instability due to fixed configurations or monolithic optimization methods. We propose AutoMDT, a novel Modular Data Transfer Architecture, to address these issues by employing a deep reinforcement learning agent to simultaneously optimize concurrency levels for read, network, and write operations. This solution incorporates a lightweight network-system simulator, enabling offline training of a Proximal Policy Optimization (PPO) agent in approximately 45 minutes on average, thereby overcoming the impracticality of lengthy online training in production networks. AutoMDT's modular …

Treatment Intensification Of Digester Dewatering Sidestreams Via Pilot- And Demonstration-Scale Revolving Algal Biofilms At Municipal Water Resource Recovery Facilities, Audrey E. Kocher, Hunter W. Schroer, Christopher A. Marks, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As water resource recovery facilities (WRRFs) pursue decarbonization, the treatment of concentrated side streams from anaerobic digestion offers a critical opportunity to reduce energy use and greenhouse gas emissions. This study evaluated the intensification potential of revolving algal biofilms (RAB) for side stream nutrient removal via partial nitrification at pilot- and demonstration-scales. RAB systems were deployed at municipal WRRFs in Boulder and Iowa City, treating real dewatering side streams across a range of ammonium (NH4⁺–N) surface area loading rates (SALR) reaching up to 196 g N m^–2d^–2. The results demonstrated that RAB systems can …

Proactllm: Proactive Conversational Information Seeking With Large Language Models, Shubham Chatterjee, Xi Wang, Shuo Zhang, Sajad Ebrahimi, Zhaochun Ren, Debasis Ganguly, Gareth Jones, Emine Arrousse, Hamed Zamani

Computer Science Faculty Research & Creative Works

Large Language Models (LLMs) have transformed information access by enabling human-like text understanding and generation. This workshop explores the next step for conversational AI: building proactive information-seeking assistants that go beyond reactive question answering. We aim to investigate how LLMs can anticipate user needs, model complex context, support mixed-initiative interactions, integrate retrieval and external tools, personalize responses, adapt through feedback, and ensure fairness, transparency, and cognitive grounding. Bringing together experts from NLP, IR, HCI, and cognitive science, the workshop will serve as a timely forum for advancing intelligent, proactive dialogue systems. It will also foster interdisciplinary collaboration.

Elucidating The Effects Of Water Activity On The Hydration Kinetics And Thermodynamics Of Ye’Elimite–Calcium Sulfate Hydrate Systems, Godwin I. Ogbuehi, Rupack R. Halder, Aditya Kumar, Gaurav Sant, Monday U. Okoronkwo

Materials Science and Engineering Faculty Research & Creative Works

Relative humidity and water activity (aH) reductions have been known to suppress the hydration of anhydrous cement clinker phases. However, the relationship between ye'elimite (C4A3$) hydration kinetics and water activity remain unclear. This study employs experimental and thermodynamic modeling approaches to investigate the influence of water activity on ye'elimite hydration in the "C4A3$ + water", and "C4A3$ + gypsum + water" systems. Experimental findings indicate that as water activity decreases, C4A3$ hydration diminishes until the reaction is brought to a halt at a threshold aH. The critical aHand corresponding solubility constant of C4A3$ (KC4A3S¯) estimated from thermodynamic analysis are 0.46 …

Effects Of Yttrium And Barium Trace Impurities On The Dielectric Properties Of  Srtio3 (111) Single Crystals At Cryogenic Temperatures, Hung Trinh, Alan Devoe, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Commercially available single crystals of (111) SrTiO₃ were found to contain impurities of varying amounts that strongly affected their dielectric performance at cryogenic temperatures. Three crystals with total impurities of 111, 126, and 625 ppm, primarily of barium and yttrium, were analyzed. Relative permittivity (εr) and loss tangent were investigated with high resolution as a function of temperature (4 K to 100 K), DC voltage (0 V/cm to 800 V/cm), and frequency (100 Hz to 1 MHz). An impurity level as low as ≈500 ppm barium resulted in an increase of the maximum permittivity (εm) to approximately 50,000 at …

Quantum Phase Coherent Tunneling In A Mixed-Morphology Superlattice Heterostructure, Qing Shao, Can C. Aygen, Xianyu Chen, Woongkyu Lee, Robert P.H. Chang, Julia E. Medvedeva, Matthew A. Grayson

Physics Faculty Research & Creative Works

Multilayer phase coherence is demonstrated in a mixed morphology superlattice heterostructure, generalizing the paradigm for superlattice miniband engineering. Thirty years since the original proposal by Tsu, a superlattice has been realized with alternating amorphous (a-MoO₃) and polycrystalline (pc-In2O₃) layers, whose high-quality exhibits quantum phase coherence across multiple periods of amorphous barriers. Cross-plane phase coherence is quantified via weak localization signatures in magnetic field under the diffusive Fermi-surface model.

Energy-Harvesting Concurrent Lora Mesh With Timing Offsets For Underground Mine Emergency Communications, Hilary Kelechi Anabi, Samuel Frimpong, Sanjay Madria

Mining Engineering Faculty Research & Creative Works

Underground mine emergencies destroy communication infrastructure when situational awareness is most critical. Current systems rely on centralized network infrastructure, which fails during emergencies when miners are trapped and require rescue coordination. This paper proposes an energy-harvesting LoRa mesh network that addresses self-powered operation, interference management, and adaptive physical layer optimization under severe underground propagation conditions. A dual-antenna architecture separates RF energy harvesting (860 MHz) from LoRa communication (915 MHz), enabling continuous operation with supercapacitor storage. The core contribution is a decentralized scheduler that derives optimal timing offsets by modeling concurrent transmissions as a Poisson collision process, exploiting LoRa's capture effect …

A Comprehensive Overview Of Chronic Wound Infections And Current Treatment Methods, Sarah Fakher, David J. Westenberg

Biological Sciences Faculty Research & Creative Works

Chronic wound infections pose significant healthcare challenges due to persistent biofilms, antibiotic resistance, and impaired healing pathways. These wounds are characterized by prolonged inflammation, microbial colonization, and disrupted tissue regeneration, leading to substantial morbidity and healthcare costs. This article reviews current knowledge on chronic wound types, their pathophysiology, and the mechanisms underlying biofilm formation to examine the latest advancements in antimicrobial-based strategies aimed at addressing these challenges. It highlights how diverse materials and technologies have been engineered to improve infection management, enhance tissue regeneration, and overcome the limitations of traditional treatments as well as advances that leverage innovations such as …