Digital Commons Network^™

Dig Limits Optimization Using Binary Integer Linear Programming Method In Open Pit Mines, Hussam Naif Altalhi

Masters Theses

"Dig limits optimization is the process for classifying different materials (e.g., ore, stockpile material, and waste) into appropriately sized contiguous zones for open pit mining. The efficient determination of dig-limits is crucial for profitable and sustainable resource extraction in mining. Previous research has focused on defining dig-limits manually or using optimization approaches, but these methods are limited to only handling two material destinations (ore and waste). Thus, there is a need for operations research methods that consider the selectivity of mining equipment and can optimize dig-limits for metal mining operations with more than two material destinations. Consequently, the objective of …

Cryptographic Algorithms, Cryptocurrencies, And A Predictive Model Of Bitcoin Value By Pls Regression, Paul Kenneth O'Connor

Masters Theses

"With the invention of Bitcoin in 2009, as a seemingly timed response to the ongoing financial crisis, the popularity of the cryptocurrency has since continued to grow. Just this year, the Security Exchange Commission approved Bitcoin for exchange traded funds, allowing major investment firms to begin product trading. With this approval, and during this very moment of writing, Bitcoin has entered a bull market and reached a record value of over 72,000 USD. In addition, the Bitcoin halving event in April of 2024 is expected to increase demand even further. It has been anticipated that Bitcoin and other cryptocurrencies will …

Theoretical Modeling And Experimental Investigation Of Phase Selection During Rapid Solidification Of Alloys, Azeez Aremu Akinbo

Masters Theses

"A novel model, rooted in time-dependent nucleation theory, has been created to explore how rapid solidification affects the extended solubility in metal alloys. This model was used to forecast solubility concerning undercooling in multiple binary aluminum (Al) alloys, and its predictions for both eutectic and peritectic systems closely match experimental data. It was demonstrated that this developed model surpasses the T0 line method, which does not consider the kinetic aspects of nucleation. Furthermore, the model can be extended to ternary and multicomponent phases by assuming that the scarcest element or the slowest diffusing component restricts nucleation. Al-Cu and Al-Cr, vital …

Kinetic Simulations Of Dust Grain Charging Near Surfaces Under Various Plasma Conditions, David Lund, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents fully kinetic numerical investigations of the charging of spherical and irregular shaped dust grains in multiple configurations utilizing the Parallel Immersed-Finite-Element Particle-in-Cell Dusty (PIFE-PIC-D) framework. The simulations account for both surface charging and in-depth charging of the dust grains immersed in various ambient plasma conditions near a floating or biased surface. PIFE-PIC-D explicitly resolves the geometrical and material properties (permittivity and photoelectron emissions) of each individual dust grain. PIFE-PIC-D will model self-consistently the unsteady and stochastic charging of grains directly from the deposition of electrons and ions onto them. PIFE-PIC-D will also simulate the charging of irregular-shaped …

Sensor Tasking Strategies For Space-Based Observers In The Cislunar Environment, Smriti Nandan Paul, Roshan Thomas Eapen, Puneet Singla

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The cislunar space environment has witnessed an increase in activities, and future projections indicate significant growth in object population. Consequently, it becomes crucial to monitor these objects for space domain awareness (SDA) purposes. As the number of objects surpasses the available observers, meticulous sensor tasking becomes essential. This paper focuses on designing and exploring strategies for observing and keeping custody of known objects in cislunar space. Optical space-based telescopes, combined with lunar ground-based telescope, are employed for sensor tasking of cislunar objects residing in valuable orbits. The proposed research aims to address the following key points: (1) examination of the …

Development And Characterization Of An Ion Source To Simulate Low Earth Orbit Plasma Environment In A Vacuum Chamber, Emmanuel Kofi Asuako Wie-Addo, Scott Lucas, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A magnetic filter-type plasma source has been installed and characterized in a 10 ft long x 6ft diameter vacuum chamber. The plasma source was characterized with a fleet of diagnostic probes including an in-house cylindrical Langmuir probe. This resulted in the measurement of key plasma parameters such as electron number density, electron temperature, plasma potential, Debye length, ion current density, streaming ion energy, ion number density, and streaming ion velocity. By varying the flow rates, discharge current, and distance, single points measurements were taken at three locations downstream of the plasma source to establish an optimum operating condition to simulate …

L∞ Bounds For Transient Growth In Repetitive And Iterative Learning Control Systems, Douglas A. Bristow, John R. Singler

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper revisits the problem of large transient growth in Iterative Learning Control (ILC) and Repetitive Process Control (RPC) systems. In ILC and RPC problems a process is repeated iteratively, with new control calculations occurring in between each iteration. Large transient growth refers to the propensity of some control algorithms to grow error exponentially before eventually converging. While robust monotonic convergence algorithms (in which monotonic convergence is guaranteed usually in exchange for a small loss in performance) have largely eliminated the concern for large transient growth in ILC, similar results cannot always be obtained in RPC. The emergence of additive …

A Review Of Current Safe Distance Calculations And The Risk Of Mild Traumatic Brain Injury, A. R. Loflin, C. E. Johnson

Mining Engineering Faculty Research & Creative Works

Explosive breaching is a tactic operational professionals use to gain rapid entry and tactical advantage. This tactic exposes individuals to repeated low-level blasts (LLB), overpressure exposure generally occurring from user-directed munitions. The experimentation described in this paper highlights the need for further research into implementing explosives in tactical situations, specifically in confined areas, and the effects on individuals exposed. While current safety calculations predict peak pressures from an open-air detonation, this study incorporates the impulse of the total explosive event in a confined space. Sixteen explosive events were conducted to measure peak overpressures of the total duration of the event …

Generation Of Micro-Fracture Clouds In Rocks: Mechanisms And Applications, U. Mutlu, G. Boitnott, A. Lisjak, O. Mahabadi, Taghi Sherizadeh, D. Guner, S. Nowak, A. Ghassemi

Mining Engineering Faculty Research & Creative Works

Volume increasing or decreasing processes in rocks can lead to inter or intragranular fractures in subsurface formations. The volume change can be caused by chemical reactions involving fluid, reactive transport, and coupling with the mechanical deformation of the grains. Depending on stress, material properties and coupled thermo-hydro-mechanical-chemical (THMC) conditions, grain scale fractures may propagate and coalesce, forming a cloud of well-connected fracture networks. The mechanisms responsible for propagation, coalescence and inhibition of cloud fractures are not well known. In this study, we review coupled micro-fracture network generation mechanisms as published in the literature and observed in field, experiments, and models. …

The Influence Of Surfactants' Ionicity On The Performance Of Coal Dust Suppression, Zidong Zhao, Ping Chang, Apurna Ghosh, Guang Xu, Yanwei Liu, Ramakrishna Morla

Mining Engineering Faculty Research & Creative Works

Coal dust is a significant health hazard for coal workers, as prolonged inhalation can lead to severe diseases such as Coal Workers' Pneumoconiosis. Water spray with surfactants is commonly used as a pre-control strategy to control coal dust in underground mines. The zeta potential test is a widely used static test to evaluate surfactants with different ionicities. However, there are still some arguments about the evaluation criteria of zeta potential on surfactant performance between different researchers. Moreover, whether zeta potential can be used as an index to evaluate the surfactant suppression performance is inconclusive. To address these problems, this study …

Numerical Investigation For The Effect Of Joint Persistence On Rock Slope Stability Using A Lattice Spring-Based Synthetic Rock Mass Model, Mariam Al-E'Bayat, Dogukan Guner, Taghi Sherizadeh, Mostafa Asadizadeh

Mining Engineering Faculty Research & Creative Works

This study underscores the profound influence of rock joints, both persistent and non-persistent with rock bridges, on the stability and behavior of rock masses—a critical consideration for sustainable engineering and natural structures, especially in rock slope stability. Leveraging the lattice spring-based synthetic rock mass (LS-SRM) modeling approach, this research aims to understand the impact of persistent and non-persistent joint parameters on rock slope stability. The Slope Model, a Synthetic Rock Mass (SRM) approach-based code, is used to investigate the joint parameters such as dip angle, spacing, rock bridge length, and trace overlapping. The results show that the mobilizing zones in …

Comparative Analysis Of Different Cfd Turbulence Models For A Diesel Pool Combustion Event In An Underground Mine: A Case Study, Ashish Ranjan Kumar, Oluwafemi Salami, Nana A. Amoah, Guang Xu

Mining Engineering Faculty Research & Creative Works

Underground Mine Fires Are Dangerous, Consume Resources, and Emit Pollutants. Therefore, Acquiring In-Mine Data for Fire Research is Hazardous and Expensive Due to Unsteady Temperature Changes and Toxic Gas Emissions. Computational Fluid Dynamics (CFD) Models Are Often Developed to Mimic Airflows and Combustion-Associated Heat Transfer. However, Research on the Performance Evaluation of the CFD Turbulence Models to Mimic Fire Events is Limited. This Paper Summarises the Modelling Results for a Diesel Pool Fire Event in an Experimental Underground Mine that Uses an Exhaust Ventilation System. a Fire Dynamics Simulator (FDS) Model Was Developed to Show the Spatio-Temporal Temperature Evolution. Reynolds-Averaged …

Investigation Into Helmet–Head Shock Wave Interactions At Low Overpressures Through Free-Field Blasts And Schlieren Imagery, C. J.H. Thomas, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Brain Injuries in Warfighters Due to Low-Level Blasts, Even While Wearing a Helmet, Are Common. Understanding How the Form of a Shock Wave Changes When Impacting a Head Donning a Helmet May Present Solutions to Reducing Shock Loading on the Head, Thereby Reducing the Prevalence of Blast-Induced Traumatic Brain Injury. a Manikin with PCB Piezoelectric Transducers throughout the Head Was Exposed to Low-Pressure Free-Field Blasts using an RDX-Based Explosive Charge Designed to Output a Side-On overpressure of 4 Pounds Per Square Inch (Psi) [27.5 Kilopascals (KPa)] with and Without a Helmet. Orientations of 0, 45, 90, 135, and 180 Degrees …

Quantitative Proteomic Profiling In Brain Subregions Of Mice Exposed To Open-Field Low-Intensity Blast Reveals Position-Dependent Blast Effects, M. Jackson, S. Chen, P. Liu, M. Langenderfer, C. Li, H. R. Siedhoff, A. Balderrama, R. Li, Catherine E. Johnson, C. M. Greenlief, I. Cernak, R. G. Depalma, J. Cui

Mining Engineering Faculty Research & Creative Works

The Neurological Consequences of Combat Blast-Induced Neurotrauma (BINT) Pose Important Clinical Concerns for Military Service Members and Veterans. Previous Studies Have Shown that Low-Intensity Blast (LIB) Results in BINT with Multifaceted Characteristics in Mice Exposed to Open-Field Blast in Prone Position. Although the Prone Position is Natural for Rodents, Experimental Models of Blast using This Position Do Not Represent Common Scenarios of Human Standing While Being Exposed to Blast during Deployment or Military Training. in This Study, We Used Our Previously Developed BINT Mouse Model of Open-Field LIB with Mice in an Upright Position and Then Used Quantitative Proteomics and …

Characterization Of The Kansas River Alluvial Aquifer Using Towed Transient Electromagnetic Geophysical Method, Jonathon Daniel Voss

Masters Theses

"Forecasted urban development areas west of Kansas City, Kansas in the coming decades has caused an increase of research into water resources (Butler et al. 2022). A location of investigation has been the Kansas River Alluvial Aquifer (KRAA) for shallow ground water resources. To investigate the KRAA structure and grain texture, the towed transient electromagnetic system (tTEM) in conjunction with direct push electrical conductivity logs and lithology wells were used to investigate four locations between Lawrence and Manhattan, Kansas. In total, 110 line-kilometers of tTEM data was collected. The tTEM data collected were high quality and through inversions of the …

Simulation Of Lc Circuits In Cylindrical Photoemission Driven Cavities Using Coupled Monte Carlo And Particle-In-Cell Codes, Ravi Sanjay Shastri

Masters Theses

"This work presents a computational experiment simulating irradiation of gold in a cylindrical cavity. The full 3-D simulation with a B-Dot diagnostic is modeled, and a subset of the results are compared to modeling the system as a coupled anode/cathode (AK) gap and transmission line. The cavity is filled with N2 and Ne gasses at pressures ranging from vacuum to 1000 mTorr. Space-charge limited emission physics, electric discharge physics, LC circuit physics, and Monte-Carlo methods are explored.

The computation process happens in two steps. First, the electron emission material is irradiated with an input x-ray photon spectrum to produce a …

A New Proper Orthogonal Decomposition Method With Second Difference Quotients For The Wave Equation, Andrew Calvin Janes

Masters Theses

"Recently, researchers have investigated the relationship between proper orthogonal decomposition (POD), difference quotients (DQs), and pointwise in time error bounds for POD reduced order models of partial differential equations. In \cite {Sarahs}, a new approach to POD with DQs was developed that is more computationally efficient than the standard DQ POD approach and it also retains the guaranteed pointwise in time error bounds of the standard method. In this thesis, we extend the new DQ POD approach from \cite {Sarahs} to the case of second difference quotients (DDQs). Specifically, a new POD method utilizing DDQs and only one snapshot and …

A Binary Integer Linear Programming Model For Optimizing Underground Stope Layout, Theophilus Mensah

Masters Theses

"Underground mine planning engineers face significant challenges when determining what geometry provides the most profitable and safe stope for extraction. Several techniques and optimization algorithms have been developed in recent years, but most fail to find optimal solutions because they are heuristic or LP-based without efficient geometric constraints. This thesis work proposes a two-dimensional binary linear programming (BILP) model for determining the optimal combination of blocks in a stope that maximizes the economic value of the layout of stopes for a sublevel deposit. The work draws from Queyranne and Wolsey’s (2017 & 2018) formulations of tight constraints for bounded up/down …

Validation Of Athlet With Purdue University Multi-Dimensional Integral Test Assembly (Puma) Test, Emin Fatih Ozdem

Masters Theses

"Following the Three Mile Island Unit 2 (TMI-2) disaster, the development of a diagnostic system for emergency situations in a nuclear power plant was identified as an essential research area to strengthen the safety of nuclear power plants. A real-time estimation system of vital safety parameters on the main side of a PWR (Pressurized Water Reactor) facility was investigated since precise post-event scenario estimations are thought to be a crucial component of the diagnostic system. The alarm system of the plant can detect an SB-LOCA (Small Break Loss-Of-Coolant-Accident), but there were a couple of potential long-term transient occurrences. The accident …

The Deep Bsde Method, Daniel Kovach

Masters Theses

"The curse of dimensionality is the non-linear growth in computing time as the dimension of a problem increases. Using the Deep Backwards Stochastic Differential Equation (Deep BSDE) method developed in [HJE18], I approximate the solution at an initial time to a one-dimensional diffusion equation. Although we only approximate a one-dimensional equation, this method extends well to higher dimensions because it overcomes the curse of dimensionality by evaluating the given partial differential equation along "random characteristics''. In addition to the implementation, I also present most of the mathematical theory needed to understand this method"-- Abstract, p. iii

Upa-Mediated Polyamidoamine Dendrimer-Based Targeted Gene Delivery System On Triple-Negative Breast Cancer, Hsin-Yin Chuang

Masters Theses

"Around 15% of breast cancers are triple-negative breast cancer (TNBC), which is characterized by the absence of three common receptors—ER, PR, and HER2, and therefore do not respond to hormonal or anti-HER2 therapies. It is urgent to explore targeted therapeutic strategies for TNBC due to its poor prognosis and rare effective targeted therapy. In this study, we developed a polyamidoamine (PAMAM) dendrimer-based targeted gene delivery system—GDP-uPA, to utilize urokinase-type plasminogen activator (uPA) to target uPA receptor (uPAR), which is highly expressed in both TNBC cells and cancer-associated stromal cells. Our results of 1H NMR spectrum, TEM imaging, and MTT assay …

Hysplit In Simulating The Atmospheric Dispersion Of Hazardous Aerosols: A Case Study In St. Louis, Missouri, Ahmet Tolga Odabasi

Masters Theses

"Atmospheric dispersion and transmission play an important role in the behavior and effects of air pollution. Human health can be adversely affected by air pollution in a variety of ways, both immediately and over time. The Hybrid Single Particle Lagrangian Integrated Trajectory Model (HYSPLIT) modeling program, a computer model and software package, tracks the transport trajectories and distributions of air pollution and various pollutants, including radioactive pollutants, in the atmosphere. It also facilitates research on pollution sources. This study simulated the transport of hazardous aerosols in St. Louis region for the years 2020, 2021, and 2022 using the HYSPLIT modeling …

High Strain Rate Analysis Of 3d Printed Concrete As Compared To Conventionally Cast Concrete, Weston Mcleod Thomsen

Masters Theses

"3D Printed Concrete (3DPC) is a developing method of construction that has advantages over conventional methods, including formwork reduction, complex geometry, and expedited construction. This technology has potential benefits for the military when considering the austere environments that forward operating bases are built in. This study aims to assess 3DPC applications in protective structures that protect critical assets from explosive blasts. These protective structures experience a high-strain rate response during blast loading of the structure, and the effects of this have yet to be analyzed in the literature concerning 3DPC. With the lack of prior research, the focus here will …

Enabling Smart Healthcare Applications Through Visible Light Communication Networks, Jack Manhardt

Masters Theses

"Future smart healthcare operations are envisioned to require the support of high-performance wireless networks. Researchers are presented with a problem, however, as the hospital environment brings unique challenges to the application of traditional radio-frequency wireless communication networks due to health concerns and electromagnetic compatibility standards. To meet these challenges and support the advancement of high-quality healthcare, we propose the use of an alternative wireless technology in visible light communication (VLC). Contributing to the growing interest in VLC amongst researchers, we construct both a VLC network simulation testbed as well as real-world testbed to serve as a platform for the development …

Open-Ended Hollow Coaxial Cable Resonance Sensing Via Permittivity Fluctuations For Applications To Exhaled Breath Health Monitoring, Peter Henry Holtmann

Masters Theses

"We report a pre-diagnostics breath analyzer based on the open-ended hollow coaxial cable resonator (OE-HCCR) to achieve real-time differentiation of healthy and compromised lung function through electromagnetic analysis of exhaled breath matter. A two-phase amplification scheme of electromagnetic signatures metered via the S11 phase curve offers high sensitivity to permittivity fluctuations in exposed airflow. The mathematical model of the breath analyzer is explained, followed by experimental validation of numerical findings from previous work. The collection of breath transient signals is performed through monitoring the reflected power magnitude and phase of the scattering parameter (S11) at the resonance frequency. Material fluctuations …

Investigation Of The Relationships Between Hydraulic, Physical, And Biological Soil Parameters At A Vineyard In Saint James, Missouri, Lyndsey Bennett

Masters Theses

"Soil is a living, dynamic system that performs vital functions such as crop production, organic matter decomposition, and the flow and transport of water. Given the pressures of food and in some locales water security, climate change, and sustainability, farmers, scientists, and other related specialists and stakeholders must have access to understandable soil health indicators as well as the soil hydraulic function parameters to maximize crop growth while maintaining soil health. Although biological and physical soil parameters are different, we aim to evaluate their relationship at the field scale. Hydraulic conductivity in the vadose zone may be especially important, as …

Production Of Glass-To-Metal Seals Using Additive Manufacturing Techniques, Aaron Read

Masters Theses

"Glass-to-metal (GtM) seals are hermetic barriers between glass and metal components, often used in the electronic and vacuum industries. Creating the seals traditionally requires heating all the components to the glass melting temperature, where the glass will flow and bond to the metal. Due to the manufacturing constraints of the individual components and sealing conditions there are geometric and material restrictions. Additive manufacturing techniques were used to make GtM seals to reduce these restrictions.

Hermetic, single pin seals were produced using printed metal shells, by selective laser melting (SLM), and digital light processing (DLP) printed glass preforms. Glass preforms were …

Low Finesse Extrinsic Fabry-Perot Interferometer (Efpi) Demodulation For High Temperature Gap Measurements, Abhishek Prakash Hungund

Masters Theses

"In continuous casting steel industries, mold flux is added to provide thermal and chemical insulation for molten steel. The mold flux absorbs detrimental inclusions from the steel and promotes uniform heat distribution to prevent sticking. To promote flux infiltration, mold oscillation is used, but this creates oscillation marks that reduce local shell growth and increase temperatures. Wide (2-3 mm) and deep (0.5-0.9 mm) oscillation marks with areas of 1.1-2.5 mm² are observed, affecting the steel quality, which results in a loss of 6% per billet to the industry. To address this challenge, we propose an extrinsic Fabry-Perot interferometer (EFPI) sensor …

High-Pressure Infiltration Process For Additively Manufactured Ceramic Matrix Composites, Samuel Weiler

Masters Theses

"Ceramic matrix composites were developed in order to increase the fracture toughness, thermal shock resistance, and elongation of ceramic materials, while maintaining the very high temperature capabilities of these materials. A renewed focus has been placed on ceramic matrix composites due to the need for materials that maintain good mechanical strength at very high temperatures, for use in the extreme environments encountered by hypersonic vehicles, jet turbine blades, and the like. However, conventional methods to manufacture CMCs are costly and time consuming. The aim of this work is to develop a method for creating additively manufactured ceramic matrix composites using …

The Geodetic Strain Rates From Gnss In The North American-Carribean-Cocos Triple Junction In Guatemala And Implications For Seismic Hazard, Tanaya Kashyap

Masters Theses

"Geodetic velocity data are pivotal for deciphering seismic risks, providing initial constraints for crustal surface strain rates. Gaining an understanding of the 2D surface strain tensor across an entire area necessitates knowledge of the surface velocity field, yet geodetic data such as measurements from the Global Navigation Satellite System (GNSS) are dispersed across the Earth’s surface. In the current scope of study, we have employed various methodologies to estimate strain rates in Guatemala, utilizing GNSS velocity data and leveraging the open-source Python tool Strain_2D. Strain_2D facilitates the computation of strain rates through diverse methods applied to the same dataset and …