Digital Commons Network^™

A Study Of The Haeffner Effect In Mercury, James Nicholson Baysden

Masters Theses

"In 1953, E, Haeffner reported that when he passed a direct electric current through a capillary tube filled with mercury, he obtained a separation in the isotopes of mercury with the heavier isotopes being enriched at the negative terminal and the lighter isotopes at the positive terminal. This effect has since been referred to as the Haeffner Effect, Since the original experiment with mercury, other investigators have observed this effect in many other liquid metal systems.

This investigation of the Haeffner Effect in mercury involves the use of a radioactive isotope of mercury (Hg 203) as a tracer to follow …

Determining Design Freedom Of Linear Feedback Control Systems, Harley D. Brixey

Masters Theses

“The problem confronted in this thesis is to develop a method or procedure to be used in determining the amount of design freedom that is available in any given linear feedback control system by working with the signal flow-graph representation of the system.

Literature was reviewed that deals with basic signal flow-graph theory and degrees of design freedom. Signal- flow-graph theory that forms a foundation for the development is presented.

The development consists of starting with an essential signal-flow graph of order one. The sensitivity and transmittance functions are written for this essential graph in terms of graph symbols; then …

A Study Of The Dissolution Of Titanium-Oxygen-Nitrogen Alloys In Hydrofluoric Acid, Arliss V. Martin

Doctoral Dissertations

"The purpose of this investigation was to study the effect of oxygen and nitrogen (in the alpha solid solution range) on the kinetics and electrochemistry of titanium dissolution in hydrofluoric acid. Dissolution rates, activation energies, difference effects, and potential measurements were determined with TiO_XN_Y sintered alloys and sheet metal. Values of x ranged from 0.01 to 0.126 and values of x. from 0.001 to 0.230.

Dissolution rates were determined using a gas evolution technique. Temperatures were varied from 5 to 45°C. The hydrogen evolution rates were converted to TiO_XN_Y dissolution rates by means of …

The Design, Construction, And Calibration Of An Apparatus To Determine The Thermal Conductivity Of Solids, Alan Edward Stephenson

Masters Theses

"Many pieces of equipment have been designed to determine the thermal conductivity of solids. They all, however, depend on the application of Fourier's equation of heat conduction in solids to determine the thermal conductivity. The apparatus used in this investigation is a modification of the guarded hot plate method used by the American Society for Testing Materials. Operation of the device is given in a step by step procedure both as a guide for others and also to show how it was operated during calibration of the apparatus. Data obtained in the calibration is given in tabular and graphical form …

A Model Investigation Of The Water Coning Phenomenon., Gary L. Downey

Masters Theses

"Results and procedures are presented covering the design and construction of a dimensionally scaled model of an oil reservoir and its use in investigating the problem of water coning. The theoretical considerations involved in the analytical solution of the water coning problem and the methods used in constructing, designing, and operating the above model are presented.

Four water coning experiments have been completed using the model. Three of the four runs have produced significant results. The information obtained from these experimental results have shown that the laboratory model is well suited for investigating oil reservoir problems such as water coning …

A Study Of The Angular Velocity In A Liquid Induced By A Vortex In An Emptying Container, James Paul Hartman

Masters Theses

"Previously a limited amount of investigation has been done to describe the rotational motion of fluid in a draining tank. To date tank design has been based on trial and error, since the physical mechanisms of actual draining have not been recognized. This investigation has been made to develop a technique for the measurement of the motion of the fluid during the draining process and to present the results of the observed surface velocity of the liquid as a function of depth of fluid and its distance from the center of the vortex core. Many previous investigators of vortex behavior …

The Measurement Of The Life-Time Of The 62P3/2 State Of Thallium, Danny Hale Sokolowski

Masters Theses

The measurement of the lifetime of the metastable 6²P_3/2 state of thallium is discussed. Time-sampling equipment techniques and instantaneous methods of display on an oscilloscope for measuring the lifetime are explained. The lifetime is measured as a function of mercury vapor pressure. The decay of the 5350 A thallium line is also measured to give an indication of the effect of the imprisonment of the 3776 A resonance line. This decay of the 5350 A line is also in a mercury atmosphere"--Abstract, page ii.

Fossil And Recent Beryciform Otoliths: An Adjunct To Ichthyological Classification., C. Kurt. Lamber

Masters Theses

"Otoliths are calcareous bodies, of consistent form, secreted in the auditory labyrinths of some higher fishes. Of three pairs, only the taxonomically important earstones (sagittae) are considered here. Specifically, this study is restricted to the sagittae of beryciform fishes (Order Beryciformes). Removal of some taxa from the order, and the possible relating of others, is suggested.

The morphology of beryciform sagittae is described, and three basic supra-familial groups are recognized. Diagnostic characters for families are given, with diagnoses of genera added. Sagittae of characteristic species are illustrated.

Otoliths of fossil beryciform fishes, as known from specimens and published illustrations, are …

Non-Ferrous Metal Mining And Smelting In Australia, H. R. Hanley

Missouri School of Mines and Metallurgy Bulletins

No abstract provided.

The Missouri Miner, December 14, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 30, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, November 16, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, May 04, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, March 23, 1962

The Missouri Miner Newspaper

No abstract provided.

The Missouri Miner, February 23, 1962

The Missouri Miner Newspaper

No abstract provided.

The Rollamo 1962, The University Of Missouri School Of Mines And Metallurgy

Yearbooks

No abstract provided.

Variation Of Sensitized Fluorescence With Penetration Depth Of Incident 2537a Radiation, George Grayson Robinson

Masters Theses

"An investigation of the sensitized fluorescence of a thallium and mercury mixture using a variable depth cell and photomultiplier type of detection is discussed. Data are given to indicate the variation of the intensity of the 3519A thallium line as a function of thallium temperature, as a function of mercury temperature, and as a function of cell depth. Explanations of results require the use of generally accepted ideas concerning energy transfer, emission, and absorption."

A Model Study Of The Application Of Roof Bolts Under Unsymmetrical Loading Conditions, Friedrich H. K. Esser

Masters Theses

"When coal is extracted by the long wall mining method, two gate-roads on either side of the working face are driven with the advancing operation. In the surroundings of these openings the state of stress which existed prior to mining is not only disturbed by the drifting process of the gate-roads but also by the coal extraction in the long wall, resulting in an "unsymmetrical" stress distribution. Varying incremental pressure components and the high complexity of strata movements make it extremely difficult to control the rock behavior under unsymmetrical conditions by conventional support. Application of roof bolts as an auxiliary …

Gathering Haunch Design Data By Photoelasticity, Richard B. Heagler

Masters Theses

"The haunching of beams and columns and the haunching of rigid frames is performed by design engineers for the purpose of relieving stress concentrations that might occur at discontinuities in structures. The haunch performs this relieving of stress concentration by increasing the rigidity of the structure at regions of high stress. Usually this design step is one of trial and error; that is, the engineer will select a haunch or method of haunching and then check to see if the result is sufficient for his purpose. This can be a time consuming process and can lead to uneconomical design.

In …

Effect Of The Mixed Liquor Suspended Solids Concentration On The Treatment Of Dairy Wastes By Activated Sludge Process, Meredith Hambleton Saxer

Masters Theses

"The effect of the mixed liquor suspended solids concentration on the treatment of dairy wastes by the activated sludge process was investigated to provide original and basic information of value to the waste water treatment field.

The studies were conducted using a continuous flow activated sludge laboratory unit. Two different synthetic dairy waste systems were used in this investigation, the 0.05 Percent Skim Milk Waste System and the 0.1 Percent Skim Milk Waste System. These wastes provided BOD loadings of 43.9 and 91.1 lb. BOD per day per 1000 cu. ft., respectively, at the 12 hour detention period employed. Mixed …

Investigation Of Flow Rates Through A Rockfill Dam With An Internal Spillway, Jerry R. Bayless

Masters Theses

"Tests were performed on a model of a rockfill dam with an internal spillway for the purpose of developing a method of predicting the flow rate through the dam. The flow rate depends upon the head but is affected by the rock size and the height of the impervious core; there- fore, these factors were varied in the study. A relation for flow rate in terms of head was found for each combination of rock size and core height used and was compared to the general weir equation to find the coefficient of contraction; thus the effect of changing core …

Seismic Investigation Of Flint Clay Deposits In East Central Missouri, Roland D. Dayley

Masters Theses

"Seismic refraction surveys were conducted in several localities within the east central Missouri clay districts in order to determine the applicability and economy of this method as a clay exploration tool. Results of these surveys revealed that the sink-type clay deposits possess lithologic and structural characteristics that lend themselves favorably to this method of exploration.

Seismic records obtained from profiles shot across known deposits indicate that several factors other than velocity contrast serve to produce apparent seismic anomalies.

Some unforeseen time loss and expense was encountered because of malfunctions of the seismic equipment employed, which necessitated the purchase and installation …

Fractionation Of Fission Elements By Electrodialysis, George Joseph Bub

Masters Theses

"The development of nuclear power has presented countless problems to the scientists and engineers of today. A problem of extreme importance is the disposal of radioactive wastes. Another is the recovery of some of the useful radioisotopes from fission product waste solutions. This investigation is concerned with the recovery of some of the fission elements for use in radiochemical and medical research and in industry.

At present little effort is made to recover useful fission elements. The fission product waste solutions are treated to reduce the volume and are stored until the radiological hazard is reduced and are then disposed …

The Dissolution Of Magnesium In Strong Acids, Baldev K. Bhatia

Masters Theses

"The rapidly growing demand for magnesium and magnesium-base alloys in the manufacture of aircraft has led to a great amount of research into the corrosion characteristics of these materials. The result of such research has been the development of suitable magnesium alloys and protective coatings to retard corrosion.

The standard electrode potential of magnesium lies between -2.35 volts and -2.54 volts at 25⁰C (hydrogen scale). Thus, magnesium lies next to aluminium in the electrochemical series of elements. The atmospheric corrosion of magnesium has been studied under conditions of indoor and outdoor exposure. Under these conditions the initial attack is formation …

A Model Study Of The Behavior Of Elastic Liners In Shallow Underground Openings, Martin Samuel Oudenhoven

Masters Theses

"Models of epoxy resin were used in a stress freezing technique to determine areas of possible failure in lined circular openings. These models were loaded in a centrifuge for a fixed period of time, after which they were analyzed photoelastically. The material characteristic changes, with time, were recorded on graphs and used in the analysis.

Two types of tests were conducted; one, where the lining thickness was changed and, the other, where materials of the liner and plate material were changed.

The resulting analyses furnished proof that the greater the rigidity of the lining, the higher the stress developed in …

A Comparison Of A-C And D-C Lead Compensation From D-C Prototype Networks, Piyush Parikh

Masters Theses

"The object of this thesis is to study the difference in transient and frequency response characteristics between a prototype d-c phase lead compensating network and an equivalent a-c phase lead compensating network.

A second order servo is selected to be compensated and five d-c prototype and equivalent a-c phase lead compensating networks are designed. The frequency characteristics of the a-c networks are obtained experimentally and these of the d-c networks are obtained analytically. The characteristics of both networks are compared and their differences are studied. The transient characteristics of the d-c and a-c compensated closed-loop systems to a step input …

A Comparison Of The Load Carrying Characteristics Of Hydrostatic Thrust Bearing Using Monatomic, Diatomic, And Triatomic Gases, Joseph C. Pigott

Masters Theses

"The purpose of this investigation is to compare the load carrying characteristics of gases with different ratios of specific heat. The design, construction, and operation of an apparatus for testing and comparing the load carrying characteristics of gases are described. Several monatomic, diatomic, and triatomic gases were tested and the results evaluated and compared. The data are tabulated and displayed in a series of curves.

It was found that the monatomic gases exhibit a greater clearance for a given load and a greater total load carrying capacity than the diatomic gases which in turn have a greater clearance and total …

A Model Study Of The Induction Log Applied To The Detection Of Asymmetrically Located Orebodies, Robert Walter Piekarz

Masters Theses

"This research project was undertaken to determine the possibility of using an induction log of the type applied in petroleum exploration, for the detection of conductive ore- bodies asymmetrically located with respect to a borehole. Since a mathematical analysis would be extremely complex, a model study was conducted, using graphite bodies of various shapes to simulate different modes of mineral occurence.

The investigation showed that these bodies were readily detectable, and were capable of yielding anomalous curves characteristic of their geometry. The values of apparent conductivity decreased rapidly with lateral displacement, from the logging tool, as expected, due to the …

A Preliminary Study Of The Effect Of Heat Treatment On The Strength And Microstructure Of A Glass-Ceramic Material, P. D. Ownby

Masters Theses

"The strength and microstructure of a glass-ceramic material of the composition 53 percent SiO₂, 19 percent Al₂O₃, 15 percent MgO, and 13 percent Li₂O were studied. Cylindrical specimens of glass were formed and heat-treated to six different temperature levels for various time periods. The method of strength testing used was a diametral compression loading technique. It was found that the strength of this material increased initially with heat-treatment but then decreased. The strength characteristics of the completely crystallized glass ceramic material were found to be dependent on the initial nucleation period. Some factors which influenced anomalous crystal growth are described. …

Foraminifera Of The Cenozoic And Recent Genus Sphaerogypsina Galloway, Wayne C. Horton

Masters Theses

"The morphology of Sphaerogypsina as seen in thin section affords various characters useful in classification] 1) arrangement and composition of the wall (calcareous-perforate, radially crystalline); 2) layering of wall (like Gypsina, without layering or black line, having only microlamellae); 3) shape of test (always spherical); and 4) specific characters: size of test, order/unorder ratio, size of chambers, wall thickness, pore diameter, and type of embryonic apparatus.

Correlation of the above characters has allowed recognition of two new species. Comparisons with other genera strongly suggest placing the genus in the Family Gypsinidae (nom. correct.) rather than in the …