Digital Commons Network^™

Innovations In Geospatial Technologies For Water And Environmental Resource Protection, Madeleine Bolick

All Dissertations

New technologies and applications of technologies are critical to protecting environmental and water resources. Students need to be aware of these new technologies so they can be prepared to utilize them in their future careers. One such technology is using Unmanned Aerial Vehicles (UAVs) because it can be applied to a wide variety of fields such as engineering, construction, wildlife biology, agriculture, and many more. Chapter two discusses the creation of an online teaching module to introduce students to using UAVs in natural resource research and evaluates how well students respond to the education module. Overall, student familiarity with UAVs …

Variability In Anesthesia And Its Implications For Improving Patient Safety, Joshua Michael Biro

All Dissertations

Improving patient safety in anesthesia has proven to be an arduous and challenging task. Despite the many strategies and interventions to improve patient safety that have been employed, patient harm in anesthesia remains a problem. The struggle to reduce patient harm in anesthesia is both attributable to and representative of the complexity of the anesthesia system. In navigating this complex system, anesthesia providers have different approaches to how they accomplish their work, which results in variability in anesthesia practice. This variability provides an immense challenge to designing and implementing efforts to improve patient safety, as rigid interventions are often met …

Protein A And Multimodal Anion-Exchange Membrane Adsorbers For Downstream Purification Of Therapeutic Biomolecules, Joshua Osuofa

All Dissertations

This dissertation explores development and characterization of membrane chromatography tools for downstream purification of therapeutic biomolecules. Convective technologies, particularly membrane chromatography, are emerging in the field of bioseparations as an alternative to resin chromatography due to their improved throughput capability. On the forefront of emerging membrane technologies are multimodal and Protein A membrane adsorbers. The overarching theme of this dissertation research was to investigate advances in these membrane chromatography tools. The primary objective was to develop and characterize novel Protein A membrane adsorbers. A secondary objective was to characterize newly commercialized Protein A and multimodal anion exchange membrane adsorbers.

Two …

Exploring Transfer Students’ Perceptions Of Their Transition Experience In Calculus 2 At A Research Intensive Institution: A Schlossberg’S And Tinto’S Theory Approach, Steven Edalgo

All Dissertations

This study explored the lived experiences of eleven transfer students as they described their experiences in Calculus 2 at very high research land grant institutions (R1). This qualitative investigation focused on the psychological phenomenon of transition as the transfer students perceived, reflected, made sense, and understood their transition experience. Furthermore, this study explored transfer students’ understanding of how they perceive the attributes of their success or lack of success in Calculus 2.

Employing the use of Schlossberg’s Transition Framework along with Tinto’s Persistence/Departure Framework, the perceptions of the transition experience was analyzed through the lens of this conceptual framework. The …

Supporting Nontenure Faculty In Documenting Teaching Effectiveness In A Faculty Learning Community, Becky Tugman

All Dissertations

This case study project explored the benefits of peer-supported review of teaching (P-SR) as part of a faculty learning community (FLC) to help increase nontenured track faculty's confidence in submission materials for annual evaluations and faculty promotion. The high-stakes evaluation guidelines can be vague, and nontenured faculty may have limited submission support. The FLC format was used to increase submission confidence and understanding of effective teaching evidence by offering a space for collaboration and problem-solving in a collective and meaningful way. The literature supporting professional development using the FLC framework model has grown since Milton Cox introduced it in 2004. …

Investigation Of Vo2 Thin Films And Devices For Opto-Electromechanical Applications, Samee Azad

All Dissertations

Specialized and optimized low pressure direct oxidation technique have been implemented to synthesize high quality VO₂ thin films on various substrates (sapphire, SiO₂/Si, AT-cut quartz, GaN/AlGaN/GaN/Si and muscovite). Structural and surface characterization methods such as X-ray diffraction, Raman spectroscopy and atomic force microscopy have been administered on the grown VO₂ films which indicate their material quality. Transition of characteristics of the VO₂ films are caused by semiconductor metal transition (SMT). This phenomenon is attributed as the change maker in transition of resistivity and transmitted optical power through the VO₂ films. Apart the substrates mentioned, …

High-Energy Storm Events And Their Impacts On Carbon Storage In Tidal Wetlands Of South Carolina, Gavin Gleasman

All Dissertations

Atmospheric carbon dioxide (CO₂) concentrations have been increasing at an accelerating rate for the past two centuries, profoundly impacting global climate change. Atmospheric CO₂ concentrations are influenced by the global carbon cycle through physical and biogeochemical pathways. Tidal wetland environments play a vital role in the global carbon cycle by offsetting atmospheric CO₂ concentrations through their natural physiochemical processes of high autotrophic productivity, allochthonous organic matter deposition, anoxic soils, and continuous accretion which promotes carbon sequestration with long-term storage at the land-ocean margin. The Intergovernmental Panel on Climate Change (IPCC) and United States Global Change Research …

Vibration-Based Fault Diagnostics In Wind Turbine Gearboxes Using Machine Learning, Abdelrahman Amin

All Dissertations

A significantly increased production of wind energy offers a path to achieve the goals of green energy policies in the United States and other countries. However, failures in wind turbines and specifically their gearboxes are higher due to their operation in unpredictable wind conditions that result in downtime and losses. Early detection of faults in wind turbines will greatly increase their reliability and commercial feasibility. Recently, data-driven fault diagnosis techniques based on deep learning have gained significant attention due to their powerful feature learning capabilities. Nonetheless, diagnosing faults in wind turbines operating under varying conditions poses a major challenge. Signal …

Social Distortion: Disinformation, Polarization, And The Politics Of Identity In An Online World, Jennifer Duck Brown

All Dissertations

This dissertation addresses three issues that intertwine: Disinformation, polarization, and the politics of identity. Social media currently dominates how we receive our news and information. This coincides with a disinformation pandemic full of false news and propaganda running rampant online. What often ensues is a social distortion that poses as reality. Seventy-two percent of all Americans use some type of social media according to Pew Research. Not all social media is nefarious, but the design of the social platforms further aggravate how people learn and communicate. Through original and peer-reviewed mixed methods research on topics including the conspiracy theories of …

Processing, Microstructure, And Properties Of Alumina Ceramics And Silica Glass During Laser Selective Additive/Subtractive Manufacturing, Xiao Geng

All Dissertations

The heterogeneous structure is essential to obtain excellent performance in many ceramics or glass devices/components. Conventional fabrication on these heterogeneous structure composites usually requires multiple treatments, specific molds for certain structures, and post-processing to get desired structure and properties. Therefore, the flexibility of the structure is limited, and a long fabrication time is required.

Integrated additive/subtractive manufacturing and laser-based technologies have caught researchers` attention in ceramics/glass heterogeneous structure fabrication. This is because the integration of additive manufacturing (AM) with subtractive manufacturing (SM) not only maintained the advantages of AM in rapid prototyping, design complexity, and reduced material wastage but also …

Implementation Of An Early College Design In A Rural High School: Empowering Place-Conscious Leadership To Affect Change And Overcome Barriers To Innovation, Michael Timko

All Dissertations

This qualitative, improvement science, autoethnograpic case study aims to examine a unique perspective on rural research through the lens of place-conscious leadership. With an identified problem of inequity in advanced-level course offerings, which resulted in lost student opportunities and student attrition to neighboring schools, the leadership at Forest Lakes High School (FLHS) in rural South Carolina began the ambitious journey of reframing their narrative. As a scholarly researcher and administrator at FLHS, I had the unique opportunity to immerse myself fully in all aspects of this study. My dual positionality allowed me to study this process while sharing the lived …

Activated Carbon Synthesis From Lignin-Rich Byproduct Streams Of Biorefineries, Chengjun Wu

All Dissertations

Over the past decade, the production of biofuels from lignocellulosic biomass has steadily increased to offset the use of fuels from petroleum. To make biofuels cost-competitive, it is necessary to add value to the “ligno-” components (up to 30% by mass) of the biomass. Instead of just burning it for heat and electricity generation, direct conversion of lignin carbon into a product provides a complementary path to carbon capture, promoting a more environmentally conscious approach. However, the utilization of these lignin-rich byproduct streams, which are separated from the biofuels production, for industrial products can be challenging. The use of specific …

Improving Lignin Recovery From Paper Mill And Biorefinery Waste Streams Via Liquid-Phase Splitting, Carter Fitzgerald

All Dissertations

Lignin is an abundant biopolymer with significant promise due to its aromaticity. It has been targeted as a replacement for a number of petroleum-based products including adhesives, coatings, polyurethane foams, activated carbon, and carbon fibers. However, commercially available bulk lignins are too polydisperse, and contain too many residual metals from the pulping process that are detrimental to the properties of the final product.

The Sequential Liquid-lignin Recovery and Purification (SLRP) process was developed by Michael Lake and John Blackburn, in collaboration with Clemson, with the intention of creating a continuous method for recovering lignin from paper-mill black liquors. Thies and …

Cyber Attack Surface Mapping For Offensive Security Testing, Douglas Everson

All Dissertations

Security testing consists of automated processes, like Dynamic Application Security Testing (DAST) and Static Application Security Testing (SAST), as well as manual offensive security testing, like Penetration Testing and Red Teaming. This nonautomated testing is frequently time-constrained and difficult to scale. Previous literature suggests that most research is spent in support of improving fully automated processes or in finding specific vulnerabilities, with little time spent improving the interpretation of the scanned attack surface critical to nonautomated testing. In this work, agglomerative hierarchical clustering is used to compress the Internet-facing hosts of 13 representative companies as collected by the Shodan search …

All Hands On Deck: Choosing Virtual End Effector Representations To Improve Near Field Object Manipulation Interactions In Extended Reality, Roshan Venkatakrishnan

All Dissertations

Extended reality, or "XR", is the adopted umbrella term that is heavily gaining traction to collectively describe Virtual reality (VR), Augmented reality (AR), and Mixed reality (MR) technologies. Together, these technologies extend the reality that we experience either by creating a fully immersive experience like in VR or by blending in the virtual and "real" worlds like in AR and MR.

The sustained success of XR in the workplace largely hinges on its ability to facilitate efficient user interactions. Similar to interacting with objects in the real world, users in XR typically interact with virtual integrants like objects, menus, windows, …

Integrated Energy-Aware Motion Planning And Charge Scheduling Of Unmanned Aerial Vehicles, Hayleyesus Alemayehu

All Theses

The growing demand for unmanned aerial vehicles (UAVs) is driven by their operational convenience, cost-effectiveness, availability, and adaptability to various scenarios. In energy-constrained environments, optimizing energy consumption and ensuring a continuous power supply for UAVs is crucial for mission success. The objective of this thesis is to address this issue by integrating energy-aware motion planning and charge scheduling for UAVs by utilizing a charger hosted on an unmanned ground vehicle (UGV), whose rendezvous locations and routes are jointly computed to minimize overall energy consumption.

This thesis proposes a hierarchical trajectory and control framework comprising local and global planners for each …

The Application Of Model Predictive Control On Paralleled Converters For Zero Sequence Current Suppression And Active Thermal Management, Justin Dobey

All Theses

In the field of power electronics, the control of rectifiers is a crucial area of study. Rectifiers are used to convert AC power into DC power, and are commonly used in a wide range of applications, including renewable energy systems, industrial automation, and consumer electronics. However, in medium and high-power systems when multiple rectifiers are connected in parallel to a DC bus, stability issues can arise, including voltage fluctuations, zero sequence circulating current, and thermal imbalance.

Achieving stable DC bus voltage is essential for maintaining the proper functioning of electronic devices, while suppressing zero sequence current is necessary for protecting …

Photodynamic Therapy To Treat Triple Negative Breast Cancer In Vitro, Hunter S. Warren

All Theses

Triple negative breast cancer (TNBC) is the most resilient form of breast cancer, being one of the leading causes of death for women and making up 7% of all cancer deaths. Photodynamic therapy (PDT) offers a minimally invasive solution to TNBC as a passive-targeting treatment that reduces the need for other well established yet harsh treatments that can be taxing on the patient. PDT involves the use of a high-energy red light on the area of a tumor injected with photosensitizers (PS) that generate reactive oxygen species (ROS) in the tumor, triggering cell death. The PS tetra(hydroxyphenyl)chlorin (m-THPC) was used …

Examining Individuals' Use Of The Internet For Healthcare Activities Over Time: Statistical Analysis Of Nhis Data, Zachary Junkins

All Theses

Telehealth is an increasingly important component of healthcare services. Telehealth services may present an opportunity to increase the equity, accessibility, and effectiveness of healthcare. As such, it is critical that telehealth design focus on reducing the barriers to access and usability that may impair some telehealth users. I utilized data from the National Health Interview Survey (NHIS) and multiple logit regression models focused on different aspects of telehealth in order to determine demographic characteristics, behaviors, or opinions which may predict groups that are likely to face a barrier to using telehealth services. This analysis provides an exploratory look at the …

Multiplex Gene Editing In Hepatocytes As A Therapeutic Approach For Familial Hypercholesterolemia, Sarah Minich

All Theses

Familial hypercholesterolemia (FH) is a genetic disorder associated with elevated levels of low-density lipoprotein cholesterol (LDL-C) that increases the risk of atherosclerotic cardiovascular disease. FH affects 1 in 250 people.¹ Most FH cases are caused by loss-of-function mutations in the either one or both copies of the LDLR gene, which encodes for the LDL-C receptor protein and is responsible for removing excess LDL from the circulating blood plasma.² Current treatments for FH include medications that reduce LDL from the bloodstream.

Angiopoietin-like 3 (ANGPTL3) is a lipoprotein lipase inhibitor. Studies show that loss-of-function mutations in ANGPTL3 are associated with …

Carbon Fibers From Athabasca Oil-Sand Asphaltenes, Blake Reardon

All Theses

Carbon fibers possess ultra-high specific strength and modulus. Therefore, the material is popular in aerospace, automotive, and sports industries. Approximately 95% of all carbon fibers are spun from a high-cost precursor, polyacrylonitrile (PAN). There is a need for a cheaper grade of carbon fiber for low-cost applications because about half of carbon fiber cost is associated with precursor cost. A promising alternative to the high-cost PAN precursor is petroleum-based asphaltene. Asphaltenes are highly aromatic and have a high carbon content but lack the purity of the PAN precursor. Processes like the molten- sodium desulfurization upgrading have been used to harvest …

Evaluating The Feasibility Of Using Strain Measured During Sinusoidal Rate Pumping Tests To Characterize An Aquifer, Riley Blais

All Theses

Pumping tests with sinusoidal variation in pumping rate have been proposed as a method for improving aquifer characterization. These tests can interrogate a larger aquifer volume than slug tests and they can be more sensitive to small variations in drawdown. Current methods of using sinusoidal variations of rate are based on measuring pressure signals from the reservoir or aquifer, which requires access to monitoring wells. An alternative approach has been developed that measures the strain in the vadose zone instead of pressure in the reservoir. An instrument has been developed at Clemson University that can measure small strains using optical …

Quantitative Techniques For Classifying Mouldings: An Exploration Of Logistic Regression Within Architectural Investigations, Chase Pilcher

All Theses

Since the passing of the National Historic Preservation Act in 1966, the realm of architectural history has evolved, becoming more interdisciplinary. There was a shift in focus from looking at architecture from a fine art point of view to looking at it through a social lens. The new social perspective approach focused not only on the buildings but also on the people that inhabited or constructed the space. Approaching architectural investigations in this manner has allowed for a deeper understanding of the influences that shaped the built environment. Advancements in technology have also aided in furthering our overall comprehension of …

The Influence Of Diversity Dimensions On Student’S Collaboration Success: What It Means For Workforce Development In Manufacturing, Oyinkansola Adeite

All Theses

Manufacturing productivity is measured by labor productivity which is the hourly output of the manufacturing economy. The recent reduction in productivity numbers by the United States Bureau of Labor Statistics emphasizes the need for workforce development. With globalization and technological advancements, diversity has emerged as a critical aspect for the workplace. By encompassing dimensions such as education, race, and age, diversity creates a tapestry of unique perspectives and experiences. This study’s aim is to figure out the effect of a diversity dimension on team performance using intelligent systems, and in addition, if extra dimensions of diversity further impact team performance. …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Development Of Modeling Approaches For A Molecular Level Understanding Of Ligand-Lanthanide-Water Systems, Sayani Biswas

All Theses

Lanthanides (Ln) are a subset of rare earth elements (REEs) that are essential components in electric vehicles, smart phones, and wind turbines. Current REE recovery processes are time intensive and produce hazardous wastes. Developing sustainable recovery processes require new techniques that are economical and less wasteful, such as affinity-based extraction and separations. Enabling affinity-based recovery requires use of ligands designed to bind strongly and selectively to lanthanides. Developing design rules to make such ligands requires an understanding of the coordination environment of lanthanide-ligand complexes. In this work, we begin to develop a molecular level understanding of aqueous lanthanide-ligand systems with …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Digital Hair Creation For Archaeological Facial Approximation: George Dixon, The Last Captain Of The Hl Hunley, Robert Emerson

All Theses

This study explores the application of digital hair creation techniques in archaeological facial approximation, focusing on the case of George Dixon, the last captain of the HL Hunley submarine. While digital hair creation techniques have been previously employed in facial approximation, this research seeks to investigate further their potential and advantages over traditional methods, particularly regarding flexibility and the ability to create multiple variations.

Facial approximation is a critical method for reconstructing the physical appearance of historical individuals. However, accurately recreating their hairstyle presents a significant challenge due to limited information and reliance on artistic interpretation. This research aims to …

Healthcare Built Environment And The Covid-19 Pandemic, A Mixed-Method Study, Mohammad Saleh Nikooopayan Tak

All Theses

The outbreak of COVID-19 presented an unparalleled risk to public health, leading to urgent scientific efforts in understanding transmission mechanisms and mitigating risks, especially in healthcare settings. This mixed-methods study examines knowledge advancement regarding indoor air quality in healthcare facilities during the pandemic. A systematic literature review of 163 post-COVID studies identifies key research thrusts and 31 recommendations related to building ventilation, air filtration, surface disinfection, and monitoring. Comparison with over 200 pre-pandemic publications reveals both reliance on established infection control principles and unique contributions, such as detecting viral RNA in air and surface samples indicating potential airborne and fomite …

Effect Of Transverse Post-Tensioning On Moment Distribution Between Channel Girders, William Eubanks

All Theses

This thesis investigates the strength of prestressed concrete channel girders used

in bridges in South Carolina and how to improve their load distribution. The specimens

are 30 feet in length, 33 inches wide and 17 inches deep. South Carolina has 377 bridges

containing prestressed concrete channel girders and many of these bridges received a

poor load rating in a recent load rating project conducted by the South Carolina

Department of Transportation (SCDOT). The research included flexural testing of seven

individual channel girders and load distribution tests of three transversely post-tensioned

channel girders. Individual flexural testing was done to determine the …