Digital Commons Network^™

Backcountry Equestrian Camping Online Course, Gillian Larson

Agricultural Education: Graduate Internship Reports

This AGED 539 project describes the creation of a Backcountry Equestrian Camping online course, including the goals of the course, an outline of the topics, and a summary description of the module contents. The course itself consists of material designed to provide participants with the necessary information to successfully travel and camp overnight on backcountry trips with a horse or mule, which is presented in a series of modules that include videos, written material, and downloadable PDFs. There is also an evaluation and acknowledgments segment.

Aged 539 Internship Report, Ashlyn Bartlett

Agricultural Education: Graduate Internship Reports

This internship and project report includes documentation required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The documents are concurrently used for the Agriculture Incentive Grant review process at Rio Vista High School conducted by representatives of the California Department of Education. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Rio Vista High School, the agriculture program and the community.

Aged 539 Graduate Internship Report - Everett Alvarez High School, Miranda Pawling

Agricultural Education: Graduate Internship Reports

This internship and project report includes validation documents required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Everett Alvarez High School, the agriculture program and the community.

Toast Pastry Studio: Bakery Brand And Pastry Packaging Concept, Christina Ann Tan Ventura

Graphic Communication

TOAST PASTRY STUDIO is a fictitious bakery branding concept made to host an innovative pastry packaging system. The aim of the conceptualized package is to offer additional functionality to bakery consumers by implementing a perforated knife unit directly into the box. The overall idea of the project stems from a long-term appreciation toward bakery culture/aesthetic as well as clever packaging design.

Utilization Of Resin-Based Additive Manufacturing For Investment Casting, Matthew Frost, Isaiah Hong

Mechanical Engineering

Dr. Xuan Wang, an Industrial & Manufacturing Engineering (IME) professor at California Polytechnic State University, San Luis Obispo, has sponsored the resin-based 3D printing investment cast senior project. The objective of the project was to thoroughly research the process and document the findings of using a resin-based 3D printed part as the pattern for investment casting. While this manufacturing process is not necessarily a new idea, the lack of technical research and documentation limits its ability to be reproducible. The research portion of the senior project included analyzing the limitations to the printing/casting manufacturing process. Measurements of part thicknesses, hole …

Implementation And Analysis Of The Entity Component System Architecture, Shawn M. Harris

Master's Theses

The entity component system architecture (ECSA) is a data-oriented composition pattern and a data-driven design pattern. Data-oriented software takes into consideration generalized knowledge of hardware. Data-driven design is a methodology used to replace inflexible code with reusable components that can be added, deleted, or modified in interactive systems and games. This thesis explores the ECSA and its alternatives and their strengths and weaknesses. The paper details the creation of an ECSA and benchmarks its performance against object-oriented architectures. The hypothesis of this thesis is that the ECSA has CPU cache performance advantages over object-oriented architectures as tested by multiple benchmarks. …

Assessing The Impact Of Bicycle Infrastructure And Modal Shift On Traffic Operations And Safety Using Microsimulation, Katherine E. Lee

Master's Theses

A transportation system designed to prioritize the mobility of automobiles cannot accommodate the growing number of road users. The Complete Streets policy plays a crucial part in transforming streets to accommodate multiple modes of transportation, especially active modes like biking and walking. Complete streets are referred to as streets designed for everyone and enable safety and mobility to all users. A strategy of complete streets transformation is to connect isolated complete street segments to form a complete network that improves active mobility and public transit ridership.

This research assessed the impact of efficiently and equitably connecting and expanding the biking …

Youth Pitching Kinematics: Associations With Body Overweight Parameters, Christina K. Fong

Master's Theses

The objective of this study was to investigate associations between injury-related kinematic parameters and overweight measures for youth baseball pitchers. The injury-related kinematic parameters considered were measurements 1) at foot contact: stride length, front foot position, shoulder external rotation, shoulder abduction, and elbow flexion; 2) between FC and ball release: peak knee extension; and 3) at BR: shoulder abduction. Data from three separate collection sites examined pitching mechanics of 18 10- to 11-year-old pitchers, 11 14- to 16-year-old pitchers, and 104 16- to 18-year-old pitchers Linear regression analyses were performed to determine significant correlations between kinematic parameters and body mass …

Development Of A Prototype Ball-And-Plate Balancing Platform, Scott J. Mangin

Master's Theses

Ball-and-plate balancing platforms have been utilized throughout academia to further understanding of nonlinearities that can occur when applying control algorithms to nonholonomic and underactuated systems. The objective of this thesis is to build upon an existing ball-and-plate balancing platform used in the Intro to Mechatronics class and create a robust platform system that can be utilized by future students to test various controller designs derived from MATLAB/Simulink®. The ball-and-plate platform design uses a myriad of sensors to track the system components in real time: a resistive touch panel is used to track the position of the ball on the plate, …

Aeroelastic Analysis Of Small-Scale Aircraft, Kent Roberts

Master's Theses

The structural design of flight vehicles is a balancing act between maximizing loading capability while minimizing weight. An engineer must consider not only the classical static structural yielding failure of a vehicle, but a variety of ways in which structural deformations can in turn, affect the loading conditions driving those deformations. Lift redistribution, divergence, and flutter are exactly such dynamic aeroelastic phenomena that must be properly characterized during the design of a vehicle; to do otherwise is to risk catastrophe. Relevant within the university context is the design of small-scale aircraft for student projects and of particular consideration, the DBF …

Bone And Cartilage Compression Simulator, Karoline M. Wucherer, Benjamin A. Parmentier, Thomasina E. Hinkle

Biomedical Engineering

A device was developed that delivers mechanical loads to bone and soft tissue samples under physiological conditions to aid in the research of tissue engineering bone and cartilage. To begin the design process, a Network Diagram and Gantt Chart were produced to create a general timeline for the project to follow. This allowed us to measure our progress and determine what effects (if any) delays could have on our project.

Funicular Shell Exploration: Form Finding And Fabrication, Alexis Truong, Adria Burton, Ethan Mach

Architectural Engineering

Analysis and evaluation of interdisciplinary challenges associated with integrating the design and construction processes to deliver innovative thin shell structures.

Memory Capacity In A System Of Swelling Particles, David T. Keating

Physics

A system has the ability to store memory if one is able to write, retrieve, and erase information from it. Some systems are capable of storing multiple transient memories; with no noise in these systems, at long time, the memories degrade until one or two remain. The addition of noise to these systems can extend the retention of multiple memories, in some cases indefinitely [2, 3]. While this behavior was first observed in simulations of charge density waves, it has since appeared in other systems [1].

Past research has shown that sheared non-Brownian liquid suspensions of particles exhibit similar behavior …

Live Cell Imaging Gas Control, Elsa M. Bean, Brady C. Berg, Abby A. Jens

Biomedical Engineering

The following document outlines the entire process for designing and manufacturing a Live Cell Imaging Gas Control subsystem in tandem with the Heated Stage subsystem to make a CO₂ and temperature-controlled chamber for use with the Olympus IX73P2F Microscope. It highlights the current literature and patents surrounding live cell imaging and touches on the existing live cell imaging setups currently being used by other entities. Following this, it defines the scope of the project, key customer requirements, and engineering specifications to ensure the design meets all the needs of its users. This document includes project planning steps to establish …

Load Slammer Design For Dc-Dc Converter Testing, Jonathan Hidalgo, Quinton Lacomb

Electrical Engineering

In this work, we dive into the detailed design of a test load or load slammer circuit for DC/DC converters to ensure their correct functioning. This is accomplished through quick variations in frequency, amplitude, and duty cycle of the current being drawn by the converter into the load. Computer simulations of the design were performed using LTSpice and the results show that the load current could be varied per design objectives. Hardware implementation of the design was also conducted and then tested. Results were then compared with the design requirements at lower currents to evaluate the validity of the design. …

Verification Of A Digital Microfluidics Platform, Karanpartap Singh

Electrical Engineering

The electrowetting effect describes the change in contact angle between a solid surface and electrolyte in response to an applied electric potential difference. Given a planar array of individually-actuated electrodes, electrowetting can be used to transport, mix, and separate picoliter to microliter-sized droplets of liquid on a dielectric layer. Applications of this phenomenon range from lab-on-a-chip and other microfluidic devices to liquid lenses capable of altering their topology and focus within milliseconds.

This project extends prior work simulating the dependence of droplet velocity on actuation voltage and demonstrates observed physics on a physical platform. The simulation portion of this project …

Smart Motor Syringe System, Connor Wilson

Electrical Engineering

In this document a proof-of-concept design is developed and implementation to showcase the latest development in an ongoing effort to produce a series of automated syringe pumps.

Underground Transmission For Renewable Energy: Design, Modeling, And Analysis, Matthew Suen

Master's Theses

A microgrid is a local energy grid that could be disconnected from the larger grid and operate autonomously. This particular segment of the power industry is growing due to its reliability during times of emergency and crisis. Among these benefits are improved efficiency, lower operating costs, renewable generation sources, and improved resiliency of the regional electric grid. Communities can better prepare for unprecedented weather like wildfires, hurricanes, and other natural disasters. Regions that produce renewable energy can export their surplus through high voltage transmission lines to balance power supply and demand needs.

This Underground High-Voltage Transmission Network project aims to …

Live Cell Imaging Heated Stage, Kerri Byrne, Anna Frauenheim, Simon Park

Biomedical Engineering

Live cell imaging is a method used by scientists to obtain a better understanding of tissue and cell functions through the study and imaging of cellular dynamics, however it is often detrimental to cell cultures due to effects of changing environment on dynamic cellular events. In order to combat the effects of a changing environment, our team has designed, manufactured, and tested an incubation chamber that will control the heat and pH environment that these cells are experiencing throughout the imaging process. This project is sponsored by the BMED microscopy core group to be used with the Olympus IX73P2F inverted …

Mechanical Horse Project, Hernan Ramirez Resendiz, Ben Apt

Mechanical Engineering

This document outlines our senior design project for the Cal Poly Mechanical Engineering Department on behalf of Jack’s Helping Hand. As a team of two Mechanical Engineering students, we developed a structure that can support a rider and can move in three degrees of freedom to model the gait patterns of a horse. This senior project will be continued by another group that will focus on electronics and implement the motors that will induce motion on the structure that our team has built. We collected baseline data by attaching an iPhone to a horse and used that motion to compare …

Cal Poly Collegiate Cookbook, Grace C. Boyle

Graphic Communication

In this project, I developed and design a cookbook for Cal Poly students to teach techniques and highlight experiences of exceptional local cuisine within Slo county. Cooking in college is usually viewed as either a daunting task or a stress-relieving activity. Wherever each individual may fall on that spectrum, I feel passionate that there is a need for an educational cookbook tailored specifically to Cal Poly San Luis Obispo students.

This opportunity for students who are competent chefs will serve as an extension of techniques with the immersion of local Slo food experiences that can broaden their cooking pallet and …

Aged 539 Internship Report - Sequoia High School, Merced, Matthew G. Smith

Agricultural Education: Graduate Internship Reports

This internship report lays out Sequoia HS's current Agriculture program and the direction I am taking it. Included are examples of projects, facility constructs, program goals and student work describing the programs potential and direction. SHS is an alternative education campus in Merced Union High School district and does not have a set FFA or CTSO for students to participate in. My goal is to establish these programs for students to have the same opportunities they would have at a normal High School.

Aged 539 Graduate Internship Report- Washington Union High School, Manuel Torres Jr.

Agricultural Education: Graduate Internship Reports

This internship and project report includes validation documents required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Washington Union High School, the agriculture program and the community.

Arce 415 Portfolio, Jay Skaff, Audrey Williams, Sarah Tom

Architectural Engineering

The purpose of this studio is to design a sun shelter for children at the SLO Botanical Gardens. It will be used for outdoor presentations and learning experiences. When coming up with the initial design of the shell structure for the SLO Botanical Gardens, the team needed to consider the material being used, the constructability of the structure, the people who would be using the structure, and the overall lifespan of the shell.

Guastavino: Learn By Doweling, Audrey Luu, Gabrielle Favro, Robert Pulido, Cameron Grant

Architectural Engineering

We embarked on a journey into the world of shells this quarter! We began the process with form finding using rhino and grasshopper. Then made a study model using laser cutters to brainstorm ways to construct the real-life model. As a class, we completed two shell structures.

Development Of The Human Scale Twelve-Node Model, Tebrez W. Khan

Architectural Engineering

The attempted creation of a full-scale twelve-node model made of PVC pipe and golf balls. Intended use of the structure was for students to tactically learn from the model.

Population Growth Vs. Landfill Capacity Vs. Recycling Mandates In California Counties, Thomas Soares

Architectural Engineering

As population growth increases in Monterey, Fresno, Kern, San Luis Obispo, Santa Barbara, and Ventura counties, so does waste production. More waste is a cause for concern because landfills have limited capacities. In order to combat the increase in waste, cities, counties, and the state are creating recycling mandates to ensure waste is being handled appropriately. More specifically, the trash generated by residents and construction and demolition (C&D) materials are being recycled and reused instead of thrown into landfills. This report indicates that increases in recycling mandates in California cannot withstand the increase in waste generation from population growth. Another …

Effect Of Indentation On Sandwich Composite Structure Mechanical Behavior, Marius V. Jatulis

Master's Theses

Composite sandwich structures are prevalent in engineering applications where high strength to weight ratios are critical. A composite sandwich includes the addition of a core material between two composite face sheets to increase ultimate stress in compression and bending loading cases. The performance of many composite sandwich structure configurations is well understood in the undamaged case. This analysis examines a type of damage, low velocity indentation, and determines the effect on mechanical behavior. The scope of the analysis includes manufacturing sandwich composite structures, creating indentation in the composite, and testing the sandwich composite structure. The mechanical behavior of the composite …

Team Torroja, Justine Teoh, Lindsey Brophy, Brandon Watrin

Architectural Engineering

For this project, we were tasked with designing a sun shelter by SLO Botanical Gardens for their Children's Garden. It was requested that the form by derived from structural shells. The structure is to serve as a multi-purpose space to host a variety of activities on the 30 foot by 60 foot site.

Fire Rebuild, Erin L. Dupree

Architectural Engineering

The “Fire Rebuild” project involves the structural design of a single-family residence and garage. The original property was destroyed in the Tubb’s Fire, which swept through the city of Santa Rosa in 2017. The original structures were damaged beyond repair and allowed for the owner to customize the property. Following conventional residential building in the United States, the structures were designed as light framed construction, using a mixture of douglas-fir and engineered lumber. As the property is located in a WUI (Wildlife Urban Interface), and a historic California burn scar, special consideration was given to the materials and design of …