Digital Commons Network^™

Class F Power Amplifier And Doherty Power Amplifier Design, Shreyansh Suman

Master's Theses

The main goal of this thesis is to design and fabricate a power amplifier suitable for entry in IMS 2023 High Efficiency Power Amplifier Student Design Competition. Power amplifier design requires multiple design tradeoffs, for example, efficiency and linearity are the two main conflicting design parameters that require careful tradeoff to ensure optimum performance. Two prototypes are designed and fabricated for the competition: Class F operating at 1.5 GHz and Doherty Power Amplifier designed for an operating frequency of 3 GHz. Both prototypes meet the minimum requirement for qualifying in the IMS 2023 HEPA SDC. Class F power amplifier designed …

Distributed Control Of Servicing Satellite Fleet Using Horizon Simulation Framework, Scott Plantenga

Master's Theses

On-orbit satellite servicing is critical to maximizing space utilization and sustainability and is of growing interest for commercial, civil, and defense applications. Reliance on astronauts or anchored robotic arms for the servicing of next-generation large, complex space structures operating beyond Low Earth Orbit is impractical. Substantial literature has investigated the mission design and analysis of robotic servicing missions that utilize a single servicing satellite to approach and service a single target satellite. This motivates the present research to investigate a fleet of servicing satellites performing several operations for a large, central space structure.

This research leverages a distributed control approach, …

Exploring The Mass To Light Ratio Of Massive Galaxies With The Rubin Dp0 Preview Dataset, Denvir Joy Higgins

Physics

The Vera C. Rubin Observatory will perform the 10-year long Legacy Survey of Space and Time expected to begin in 2024. LSST will cover the Southern Hemisphere, collecting over two million images with an 8.4-meter telescope and 3200-pixel camera. In collaboration with the scientific community and based on the Outer Rim Simulation \citep{heit19}, the Rubin Observatory released a simulated dataset (DP0) of the data that is expected to be in hand at the 5-year mark. Using this simulated dataset, I have explored the number and luminosity of the most massive local galaxies. Using a sample of the brightest, closest galaxies …

Flash Cooking: Phase Change Thermal Storage With Solar Salt, Orion B. Barar

Physics

After a few hours of sun, the solar salt Insulated Solar Electric Cooker (ISECooker) can deliver up to 0.7 kWh of energy to the contents of a cookpot. In the first 2 minutes of cooking, the ISECooker provides an average ~5000 W to the food, resulting in “flash cooking.” Molten solar salt holds solar electric energy in an insulated chamber, allowing a user to cook in the evening, hours after the sun has set. A global group of collaborators is working to optimize the construction, dissemination and designs of ISECookers.

Child Sexual Assault Prevention And Intervention, Kira Peterson, Amaya Ibuna, Emily Valenzuela

Psychology and Child Development

In our paper, we discuss child sexual assault, its risk factors, short and long-term outcomes, as well as prevention and intervention programs that have been shown to be valuable. To limit research, our focus will be on children living in the United States who have been physically sexually assaulted. To spread awareness of child sexual abuse, we also developed a pamphlet (See Appendix) that will be distributed to CASAs, which stands for Court Appointed Special Advocates. The development of the pamphlet is described in the combined Method and Results section. We conclude our project and paper with a Discussion section …

Novel Tool Steel Alloy P179-X17 Made With Rapid Alloy Development For Additively Manufactured Die Inserts To Be Used In Aluminum Injection Molding, Amy Harter, Jack Leimbach

Materials Engineering

The purpose of this project is to find an alloy that can be additively manufactured into die inserts for aluminum injection molding. Current die inserts are manufactured through casting, but additive manufacturing would allow for more intricacy in shape design and better design of cooling passages. A successful alloy must have a minimum hardness of 40 HRC and retain 50% of its strength after a thermal exposure of 600°C for 50-hours. The alloys under consideration are H13 tool steel, Dievar, and P179-X17 – a novel steel alloy developed by Oerlikon Surface Solutions. Cast and printed samples were received for each …

Investigation Into Oxygen Diffusion As It Relates To Alpha Case Formation In Ti-6al-4v Based On Different Forging Thermal Cycles, Tyler J. Meador, Jon Leduc, Francesca Hope

Materials Engineering

An investigation into the growth kinetics of alpha case in Ti-6Al-4V in the presence of oxygen was conducted for different forging thermal cycles. This was done to determine whether the alpha case should be removed after each thermal cycle or as the final step after forging. The thermal cycles consisted of four hours at 1750 °F. Samples were subjected to this treatment one, two, three, and four times along with a continuous sixteen hour hold. Four cycle and Hold samples were subjected to an additional thermal cycle above the beta transus at 1925 °F. These then went through a final …

Surface Characterization Of Low-Density Polyethylene Mulch, Risha Shah

Materials Engineering

Plastic pollution in aquatic systems has traditionally been highlighted in past and current research due to the increase in plastic production every year. Unfortunately, quantitative and qualitative data regarding plastic pollution on land systems such as agricultural mulch is limited. Agricultural mulch breaks down into macroplastics and then degrades into microplastics. The microplastics investigated in this study are all secondary microplastics: microplastics that form due to weathering of larger fragments of plastic. Weathering can occur due to a variety of factors; however, UV radiation and mechanical weathering have been the factors of focus on most current research in microplastic formulation. …

Bruxism Biofeedback Device, Claire A. Dossey, Errin S. Abasolo, Isabelle A. Starr

General Engineering

This paper aims to summarize the design process for a biofeedback bruxism device, covering the necessary background research, engineering requirements, design process, prototyping, manufacturing, and testing for the device. The purpose of this project was to design an engineering solution for the treatment of bruxism. This entails both measuring and significantly reducing clenching and grinding during sleep, as many current solutions may reduce symptoms of the disorder, but do not treat bruxism itself. Engineering requirements included biocompatibility, size and weight, electrical safety, and easy of use and comfort. Many design options were proposed, and a Pugh Matrix was used to …

Maintaining Institutional Memory For Non-Commercial College Radio Fundraising, Samantha K. Riordan

Journalism

This paper outlines how to run a non-commercial, non-profit radio station fundraising program, commonly called a Pledge Drive. Cal Poly’s radio station, KCPR 91.3, hosts an annual Pledge Drive in the spring. KCPR staff, specifically the fundraising manager and marketing director, lead the KCPR team in raising funds that support our operations for the upcoming year. This paper will detail the strengths of past fundraising drives and potential improvements to fundraising drives in the future while addressing the question of: How do college radio stations create continuity in non-commercial radio fundraising to ensure success amid changing economic conditions and the …

The Acme Building Fire Hazards Analysis, Russ Livesay

Fire Protection Engineering: Culminating Experience Project Reports

This Fire Hazards Analysis (FHA) was written using modern fire protection engineering principles to characterize the Applied Chemistry Management and Enrichment (ACME) Building at the Pacific Northwest National Research Area (PNNRA) using both a prescriptive-based and performance-based analysis to ensure the building and occupants can be safe in fire conditions. Recommendations are made as part of this analysis to improve the survivability of this structure if a fire were to occur.

This building was found to be compliant with the prescriptive code requirements from the 2018 International Building Code except for a few minor issues that are currently being repaired. …

Design Fire Robert E. Kennedy Library, California Polytechnic State, San Luis Obispo, Jennifer Ocampo

Fire Protection Engineering: Culminating Experience Project Reports

This report evaluates the fire protection system of the Kennedy Building using a prescriptive approach and a performance-based design. The prescriptive approach evaluates code compliance of the structural design, fire suppression system, alarm and detection and smoke control. The performance-based design evaluates egress and life safety protection and three design fires that could potentially compromise the goals and objectives of the design.

The Kennedy Building is on the Campus of Cal Poly, San Luis Obispo and serves as the primary library of the university. This building has five stories of mixed occupancies. It is partially sprinklered, has limited automatic detection …

Food Processing And Campus Market (Building 24), Ian De Vries

Fire Protection Engineering: Culminating Experience Project Reports

This report provides a prescriptive and performance-based analysis of the Food Processing Building located on Cal Poly’s campus in San Luis Obispo, California. Food science and nutrition classes take place at the facility where faculty and students manufacture food products such as chocolates, jams, and barbecue sauces. The finished products are offered for sale in the building’s mercantile area, known as the Campus Market, in addition to other retail locations around the city. The Food Processing Building is considered mixed use with portions of the building classified as moderate-hazard factory (F-1), moderate-hazard storage (S-1), business (B), mercantile (M), and assembly …

Office Building In Moffett Park District, Cody Williams

Fire Protection Engineering: Culminating Experience Project Reports

The objective of this review is to analyze and evaluate the fire safety of a 5-story office building located in the Moffett Park District in Sunnyvale, California. The building is constructed largely of mass timber and classified as a Type IIIA building used primarily as office space. The first section of the report focuses on the building’s defining characteristics and use cases. The second portion of the report presents a comprehensive review of egress design, fire alarm systems, fire suppression systems, structural design, implementation of mass timber elements, and flammability requirements. The results of the analysis show that the building …

Fire Protection Engineering For Building A, Ai Choong Loh

Fire Protection Engineering: Culminating Experience Project Reports

Building A is a 9-storey mixed used development in Singapore to be completed in 2028. Fire safety provisions of Building A shall be in accordance with Singapore Fire Code 2018.

The report has analyzed the fire safety provisions in the area of structural fire protection provision, means of escape provision, automatic water suppression system provision, automatic fire detection and alarm system provision, engineering smoke control system provision, flammability assessment as well as performance based assessment.

Generally, building A complied to the prescriptive requirements of automatic water suppression system provision, automatic fire detection and alarm system, structural fire provision and means …

Dhf Conference Marketing And Branding, Anna Christine Haller

Graphic Communication

The focus for my GRC 462 Senior project is to dive into my role as Director of Marketing for the annual Women In Business conference. As the Director of Marketing for the event my goal is to develop visual branding and an event identity, develop a digital marketing strategy, create marketing collateral, and present promotional marketing to increase event sign ups. My role also includes managing a marketing creative team as well as marketing strategy team. I will also discuss how the branding and marketing initiatives reflect the Women In Business community values and add to the conference experience.

Battaglini Winery: Marketing Collateral Development & Rebranding, Lexi L. Battaglini

Graphic Communication

The Battaglini Winery is a small family-run winery located in Sonoma County. The winery has no existing brand guidelines and any marketing collateral in current use has outdated information and design elements. The purpose of this project is to provide the winery with cohesive and refreshed brand guidelines while using these guidelines to generate relevant marketing materials for consumers.

Biomechanical Knee Joint For Exoskeleton, Gabriel Ireton Ahern, Calloway Miller, Christianna Altamura, Eric Mailes

Mechanical Engineering

Our senior design project consisted of designing and manufacturing a biomechanically accurate, actuated knee joint to be integrated into an exoskeleton being developed by the Lower Limb Exoskeleton Assist Project (LLEAP), a part of the EMPOWER student association at Cal Poly, San Luis Obispo. As the human knee flexes and extends throughout gait motion, the center of rotation changes. Currently marketed exoskeletons have one point of rotation, which over constrains the knee and causes misalignment between the user and the suit [1]. Our goal was to mimic natural knee joint motion by changing the center or rotation, thus reducing misalignment …

Turbine Integrated Pitching System, Elizabeth Costley, Josephine Maiorano, Jeff Larson, Cameron Jackson

Mechanical Engineering

The Cal Poly Wind Power Club (CPWP) tasked this senior project to design, manufacture, test, and deliver a mechanism to pitch the blades for their small-scale horizontal axis wind turbine. CPWP competes in the Collegiate Wind Competition (CWC) against schools across the country, and as such it was critical to comply with the provided competition rules in addition to the design requirement from CPWP. The purpose of the pitching mechanism is to improve the performance and efficiency of the wind turbine by allowing the blades to adjust angles with different wind speeds. Specifically, this project aimed to minimize hub size, …

Prove Primary Battery Structure, John D. Burkhart, Andy Mccormick, Ryan Yu, Soren Barclay

Mechanical Engineering

In conjunction with Prototype Vehicle (PROVE) Laboratory, our group designed, manufactured, and tested a prototype structure to house the battery boxes for PROVE’s endurance vehicle. Our structure was designed to support the batteries during normal use, and in the event of a front crash. Our design is comprised of a secondary composite box to house the battery boxes, a bottom plate to affix the secondary box to the chassis floor, a horizontal plate fastened to the chassis, and a brace structure welded to the chassis. From the outset, we chose to use a secondary box, the primary battery boxes must …

Advanced Wildfire Hose Clamp, Kayla Wiseman, Andrei Lasc, James Martinez, Rachel Yee

Mechanical Engineering

We, Team AHC, have designed, manufactured, and tested an advanced firehose clamp for wildland firefighters to use during extended hose lays. The clamp is designed to stop high-pressure water flow in a firehose so that a new length of hose can be added. The current industry standard, the Timberline hose clamp, is expensive and wears down over time effecting the speed and success of hose lays. Our goal was to improve firefighter's tools and therefore improve fire fighting effectiveness.

Rapid Composter, Shannon Shinozaki, Avin Atencio, Jonathan Fraser, Lukas Kolbl, Russell Occhipinti

Mechanical Engineering

This project was created with the intent of automatically composting equine bio waste to be reused as plant fertilizer. The system consists of four subsystems: power generation and storage, automatic controls, aeration, and structure. Each subsystem may be manufactured independently, then put together. This system will not have access to power outlets, so it was designed to be solar-powered.

Parametric Bicycle Yoke, Colin Reay, Walter Minehart, Robby Harrigan, Jordan Olson

Mechanical Engineering

This report outlines the entire design, fabrication, and validation process of a parametric yoke design that addresses the packaging problem of the bottom-bracket chainstay junction in modern bicycle frames. The goal was to create an elegant, space-efficient solution that is accessible to the Cal Poly Bike Builders Club. The report includes documentation of the three-part fixture system, manufacturing process, and testing results for the yoke.

Our yoke design outperforms traditional round-tube weldments in torsional and vertical stiffness. Additionally, all manufacturing fixtures and machining operations function as intended, resulting in a finished yoke that meets all required tolerances in under an …

Treadmill Platform For Quadrupedal Robots, Baxter J. Bartlett, Jack F. Butler, Phillip A. Shafik, Tarun S. Ganamur

Mechanical Engineering

Cal Poly Legged Robots, led by Professor Refvem and Professor Xing, has been leading Cal Poly’s attempts to simulate, produce, and test their legged robots. The initial testing of the locomotion of these robots can be dangerous to the robot since any bugs in the code could cause the robot to fall over and harm itself. Our responsibility as a team was to deliver a portable platform for testing the locomotion capabilities containing a fall prevention mechanism. In short, we have designed a platform for this purpose that consists of a treadmill surrounded by a wheeled chassis with a system …

Surf Sled 2.0, Troy I. Feinstein

Mechanical Engineering

This Preliminary Design Review documents the complete detail of our final design and justifies that our specifications were met. For our senior project though California Polytechnic University, we were assigned a design and build challenge from the company AmpSurf. The project was sponsored by the Founder of AmpSurf, Dana Cummings, and involved designing and manufacturing a fully functional Surf Sled. The objective was to safely carry a physically impaired AmpSurf client across the sand on a surfboard and launch them into the ocean. The goal for our team was to improve upon a previous design, Surf Sled 1.0, to be …

Perforated Groove Cam Lock, Matthew J. Redmond, Samuel A. Potter, Dylan Weiglein, Andrew Reese

Mechanical Engineering

NASA Artemis III astronauts need a way to attach and detach various tools to an extension handle to be used during lunar EVA sample collection. Because lunar dust is so harsh and abundant, mechanisms must be designed to function regardless of the number of contact particulates. Past designs used on the Apollo missions proved to be problematic for their operators, opening the door for innovative improvement. A new mechanism has been proposed that directly addresses the performance issues of the original handle extension mentioned in NASA’s Apollo mission reports. The new mechanism boasts an open design that promotes dust tolerance …

3d Printed Aircraft, Matthew Nagy, Charles D'Amico, Alexis Salgado Medina

Mechanical Engineering

This project is to design, build, and test a 3D-printable aircraft. The goal is to create a final design that will be able to fly for the longest duration possible, around 20 seconds. To determine the correct preliminary design and manufacturing process for a 3D printed RC aircraft, an analysis of multiple design options and manufacturing materials was performed. This allowed for a variety of choices for aircraft type, airfoil design, structure, among other topics to be narrowed down to the most promising option. It has been found that the aircraft will follow a design similar to industry motor-gliders, with …

Backflow Relief Valve Test Stand, Olivia Mcnulty, Wiill Halvorsen, Ryan Dubois, David Leaman

Mechanical Engineering

This Final Design Review (FDR) document details the final design, manufacturing, testing, and results of the Zurn Wilkins Backflow Relief Valve Test Stand Project under the sponsorship of Brian Yale and Rueben Westmoreland. This project involves simulating real-world conditions of static pressure and water hammer cycling. The stand will give Zurn Wilkins’ engineers a method by which to test their relief valves prior to a rigorous, yearlong University of Southern California (USC) testing procedure. Our design involves using city water, a pump, a Zurn backflow preventer, and a control system to apply specific pressures to each end of the relief …

Saver: Surface Autonomous Vehicle For Emergency Rescue, Lucas Je Sandsor, Michelangelo Coltelli, Brian Wong, Sebastion Rivero, Kobe Hayashi

Mechanical Engineering

The design, fabrication, and testing of an unmanned surface vehicle for the NASA Micro-G NExT SAVER challenge. This device features a radio direction finding phase array to autonomously navigate to an emergency distress beacon to deliver emergency supplies.

El Mundo Del Amor: Un Sitio Para Apoyar A Lxs Hispanohablantes Locales Y Crear La Percatación Y La Diversidad En El Condado De San Luis Obispo, Daniele Lauran Mcclements

World Languages and Cultures

This project is a collective piece of tangible material that is a product of my years of learning, listening, and witnessing the overlap between the depth of different Spanish-speaking and Latinx cultures, and the various identities within the LGBTQ+ community. Taking a critical lens on what I have learned as an anglo student at Cal Poly through the words of a language that is not mine, this project speaks to the many layers to which my love, fascination and dedication with the Spanish language and cultures have impacted my life. Essentially, this project is a love letter and encapsulation of …