Digital Commons Network^™

An Evaluation Of Road Network Structure As A Predictor Of Traffic Volume, Colin M. Mcdonald

Master's Theses

This thesis evaluates the relationships between various graph theory metrics and taxi traffic volume for the cities of San Francisco, California and Porto, Portugal. We also evaluate a modified betweenness centrality metric which incorporates the count of distinct origin-destination pairs from the taxi data as the weight function. This thesis extends a paper by Pengyao Ye, Bo Wu, and Wenbo Fan by reducing circularity through a temporal train-test split and by comparing both line-graph and primal-graph formulations of betweenness centrality.

We found that past traffic volume is almost perfectly correlated with future traffic volume and that the modified betweenness centrality …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Cosmetic Clamper, Daniel Peter Gates, Bruno Roberto Martinez, Samantha Remy, Zachary Joseph Roeber

Mechanical Engineering

Cosmetic Clamper Mechanical Engineering Senior Project was a senior project at California Polytechnic State University, San Luis Obispo in the College of Engineering, Mechanical Engineering Department. The project ran from September 2025 to June 2026. The project developed the Cosmetic Clamper device, an accessibility product designed to help individuals with unilateral upper extremity motor deficits open, use, and close cosmetic containers independently.

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Short Arc Angles-Only Initial Orbit Determination For Reliable Reacquisition Of Low Earth Orbit Objects, Isabella Rackemann

Master's Theses

Low Earth orbit (LEO) is becoming increasingly congested, furthering the need for accurate tracking and catalog maintenance. Initial orbit determination (IOD) is the first step in this process, providing a preliminary estimate of an object’s state given observations. When it comes to LEO optical observations, a large portion of them are inherently short in duration. Angles-only IOD methods struggle with this data, often producing highly inaccurate solutions that limit reacquisition capabilities. This study expands on prior short arc IOD research, testing seven classical and assumed circular orbit (ACO)-modified angles-only IOD algorithms on real LEO observational data spanning 0-4 degrees of …

Kinetic Sculpture For The San Luis Obispo Botanical Garden, Yotam Barr, Reynaldo Farias, Natalie Krueger, Priscilla Puei Ci Lam

General Engineering

Flower Power designed, fabricated, tested, and installed a wind-driven metal lavender and bee sculpture for the San Luis Obispo Botanical Garden Children's Garden. The project provides a colorful kinetic installation that complements the existing poppy sculpture while remaining child-safe, durable outdoors, manufacturable with campus resources, and low cost to the sponsor. The final sculpture consists of a steel main stem installed in a sleeve-style concrete foundation, three green branch clusters, independently rotating purple lavender bud assemblies, decorative leaves, and a bee. The sculpture was fabricated from steel tube, sheet metal, bearings, printed ASA components, paint, and foundation materials. The installed …

Mars Mini Rover Sample Retrieval Robotic Claw, Cami Chambers, Ani Lachikian, Alexa Ramirez, Alex Power

Mechanical Engineering

This project involves several key stakeholders, including the Poly1 Rover Club, Professor Rich Murray, and NASA’s Jet Propulsion Laboratory (JPL). The primary objective is to develop an improved robotic claw capable of retrieving sample tubes left by the Perseverance Rover on the Martian surface. In tackling this challenge, the design must account for the harsh Mars climate while integrating cameras and electrical components, durable structure, and a rotational component to the Mini-Rover claw without incorporating an additional motor, sample storage unit, structural aspects or unnecessary weight. The current Mini-Rover consists of a four-degree-of-freedom robotic arm with joints often referred to …

Design For Repairability Demo, Wyatt Barnes, Andrew Petersen, Aaron Schiff, Ethan Dickson

Mechanical Engineering

Design for repairability is a growing focus in modern product development due to the widespread production of cheap electronic appliances with short service lives. When these appliances break, their low cost means they often end up in landfills, instead of being repaired. If these products were designed specifically with repairability in mind, they would hopefully be easier to repair by the everyday consumer. Currently, the Cal Poly Mechanical Engineering curriculum covers design for manufacturability, design for accessibility, and design for cost, but not design for repairability. To teach an effective technical elective class on this topic, Cal Poly engineering professors …

Sensory, Light, And Sound Box, Galilea Andrea Portillo, Hannah Elizabeth Henderson, Marcus Kiyoshi Kanenaga

Mechanical Engineering

The Sensory, Light, and Sound Box senior project outlined an adaptable, mobile sensory environment designed to improve cognitive and visual processing skills for students with Cerebral Visual Impairment (CVI) at the Oceano Education Center. Currently, the market lacks accessible solutions tailored to these non-verbal, low-mobility students, making traditional classrooms overwhelming. This project outlines the modification of an existing static layout into a functional, three-sided wooden over-bed frame that accommodates a standard hospital bed. Our team manufactured a structurally stable verification prototype under a $500 budget, integrating slow-closing outward-hinged walls for safety, dual Bluetooth speakers, and a synchronized LED projector that …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Elevate Grill, Tanner Bachmann, Lance Anderson, Caden Huang, Jonathan Li, Brady Alexander

Mechanical Engineering

Santa Maria-style grills are a defining cooking tool of California’s Central Coast and are valued for their open fire cooking method and adjustable grate height. While this design provides direct control over cooking conditions, maintaining a consistent cooking temperature requires frequent manual adjustment of the grate position. This process relies heavily on operator experience and continuous attention, making temperature consistency difficult to maintain in a commercial kitchen environment. The Elevate Grill project was developed for Mike Ahrens and Wren Provisions to address this challenge while preserving the traditional Santa Maria grilling experience. The system uses temperature feedback from multiple thermocouples …

Stakblocks, Micah Satoshi Inoshita, Ava Rose Doerschlag, Cody J. Ellis, Zach M. Lawton, Fernando M. Nalin, Nicholas Humphrey, Aiden Reed Anderson, Sara Maya Suratkal

Mechanical Engineering

Researchers developing sustainable building materials from agricultural waste need a faster way to prototype and evaluate small-scale samples under controlled temperature and pressure before scaling to production. Sponsored by Professor Pete Schwartz of Cal Poly San Luis Obispo, whose work focuses on sustainable technology for developing communities, this project aims to create a prototype testing device for researchers studying agricultural-waste bricks, with the University of Malawi as a potential future testing partner. The final product is intended to inform improved future designs rather than serve as a production-ready device, ultimately supporting the development of affordable, sustainable building materials for communities …

Toro Cover For Bob Packer, Bailey Smolinski, Brandon Petty, Arturo Ramirez, Kathryn Proctor

Mechanical Engineering

Small pools, spas, and hot tubs are common in residential homes, yet small pool owners face persistent tradeoffs between critical features such as weight, ease of use, and appearance in pool covers currently available on the market. Most products optimize a single attribute at the expense of others. For example, solar covers are energy efficient but structurally weak, safety meshes are cost-saving but intensive to install, and retractable covers are automated but expensive. Beyond these tradeoffs, existing solutions often demand multiple people to install, take time and effort, occupy valuable deck space, and sacrifice the surrounding aesthetic. Therefore, small pool …

Foldable Transfer Platform, Toby Sagi, Ashton Heiati, Triton Johnson, Zachary Denis

Mechanical Engineering

The report details the design and results of a Hoyer lift to transfer patients between wheelchairs and our sponsor's, Beacon VTC Santa Maria, vans. The lift disassembles into 3 main pieces, allowing the lift to be stored in the back of the van. The lift uses a hydraulic actuator to rotate the boom. We handed over our project to Beacon VTC Santa Maria for use in their facility!

Package Access Platform, Tyler Connor Moyers, Austin Sien, Brooke Almaraz, Aiden Montano

Mechanical Engineering

This Final Design Review (FDR) presents the completed package access platform project following fabrication, assembly, and verification testing of the final prototype. The project focused on the development of an adjustable and modular access platform capable of adapting to varying workspace requirements while maintaining operator safety and structural stability. The finalized design incorporates adjustable platform dimensions, modular frame expansion, integrated OSHA-compliant handrailing, and adjustable support legs to accommodate uneven surfaces and changing operational needs.

Water Turbine Dynamometer For Low-Power Turbomachinery Testing, Carmen Alaichamy, Yosef Huynh Torres, Michael Duperly, Michael Thomas Duff

Mechanical Engineering

Students in ME 443: Introduction to Turbomachinery compete to design and build efficient small impulse turbines. The course lacks a standardized method to experimentally calculate turbine power output and mechanical efficiency from accurate measurements of torque and speed, for example. To support the learning goals of ME 443, a dedicated water-turbine dynamometer is needed to provide controlled hydraulic power, accurate mechanical and electrical measurements, and clear data for performance evaluation.

Our proposed system delivers a safe, repeatable, and educational testing environment that can be integrated into the Fluids Lab or used as a standalone instructional tool. Key stakeholders include Professor …

Me443 Turbine Timing System, Jacky Liang, Michael Ayman Habib, Julio Cesar Gutierrez Jr., Eric Tran

Mechanical Engineering

No abstract provided.

Composite Carrier, Thomas W. Clarke, Kaden T. Guevarra, D'Anna M. Jennings, John F. Tomas

Mechanical Engineering

The Composite Carrier project developed and tested a proof-of-concept system to improve safety and accessibility in the Cal Poly Composites Lab. The system enables users to retrieve composite material rolls from elevated storage racks without using ladders, reducing fall hazards and improving material handling. The final design integrates rack-mounted rotary latches, a ground-level pulley release mechanism, and a custom Genie dolly attachment with a foldable cradle. Verification testing demonstrated that the prototype could securely retain representative roll loads, support repeated retrieval and placement, and improve operator safety, while also identifying future refinements such as reducing attachment width for improved rack …

Hpv Speed Bike Landing Gear, Nathan Walker, Dylan Hyde, Mark Spohn, Trey Barber

Mechanical Engineering

This report presents the development of a retractable landing gear system for Cal Poly’s human-powered speed bike. The system is designed to support the bike during low-speed operation, especially during launch, when the vehicle is unstable and typically requires assistance from a support crew. The landing gear uses spring-driven extensions controlled by handlebar-mounted Bowden cables, allowing the rider to retract the system while maintaining control of the bike. By fitting within the fairing and retracting after launch, the design aims to improve takeoff stability and rider safety while preserving the aerodynamic performance required for high-speed competition.

Golf Ball Marking Machine, Isabella Brinkman, Erin Maxwell, Benjamin Nash, Matthew Nicacio

Mechanical Engineering

The Golf Ball Marking Machine was designed, manufactured, and tested to provide a compact and cost-effective solution for applying durable identification markings to golf balls. The system integrates a gravity-fed hopper, singulation mechanism, motorized marking chamber, and automated discharge system to process golf balls with minimal operator intervention. A computer control system coordinates the marking cycle, enabling consistent application of a circumferential stripe. Verification testing demonstrated compliance with requirements for size, weight, power consumption, safety, and marking durability while maintaining a tabletop size footprint. The prototype achieved an average throughput of 5.43 balls per minute and successfully validated the feasibility …

Independent Apparel Brand Launch Campaign Strategy, Nick S. Schottenfeld

Graphic Communication

Soleil Lune is an independent California apparel brand with an established visual identity, a growing social media following, and a live product collection but lacks a coordinated marketing system to connect those pieces into a unified launch. Without that structure, the brand’s Instagram, Shopify store, and print materials were operating independently, making it difficult to build consistent customer trust or drive sales. This project developed a full launch campaign producing a print and digital lookbook, 10 Instagram campaign assets, a printed poster, and a branded care insert card all designed to work together to tell the brand story, grow the …

Kcpr 25-26 Production Handbook, Evan P. Cork

Graphic Communication

The KCPR Production Handbook serves as a resource for the production team when putting on live events for the station. It provides a brief history of the production team and context for why I decided to create this handbook. It is broken down into seven chapters, including sections that cover live event production, KCPR’s Club 91, and a list of important contacts.

Douglas Fir Bending Strength At Sub-Pyrolytic Temperatures And Aftermath, David Kroeker, Aran Badasian

Architectural Engineering

Current fire design for wood framed buildings assumes a protective layer of charring and the material beyond that layer is entirely undamaged after the fire. It is documented that wood does experience a loss of ultimate capacity during a fire, however, the bulk of tests providing the reduction in capacity have been in tensile and compressive tests. The tests described in this paper were conducted to investigate the reduction in bending strengths both during and after being raised to pre-pyrolytic temperatures. These tests confirmed current design practices as laid out in the National Design Specification for Wood Construction 2024, while …

Evaluation Of Alternative Solvents For Electrospinning Occluded Scaffolds To Model Intracranial Atherosclerotic Disease In Blood Vessel Mimics, Olivia D. Rankin

Master's Theses

Intracranial atherosclerotic disease (ICAD) is characterized by a buildup of fatty plaque within the walls of arteries supplying the brain, resulting in vessel narrowing, restricted blood flow, and increased risk of ischemic stroke. While various treatments exist for ICAD, most are accompanied by high recurrent stroke rates and other adverse events, highlighting the need for further investigation and models for pre-clinical testing. Tissue engineered Blood Vessel Mimics (BVMs), consisting of a polymer scaffold sodded with human vascular cells, serve as physiologically relevant in vitro models for vascular device testing. This thesis focused on the application of alternative solvents to a …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Develop & Test Radar Assignments For Future Graduate Curriculum, Thomas Ky Hong, Christopher William Hoferer

Electrical Engineering

With Cal Poly’s switch to semesters, many upper-level electives lack enough depth and structured content for the new 15-week format. In addition, while the Electrical Engineering department currently offers approximately five weeks of RADAR-focused laboratory material within EE 424: Intro to Remote Sensing, this limited exposure is insufficient to provide students with a comprehensive understanding of RADAR theory and practical applications. The semester conversion presents a timely opportunity to expand this existing five-week RADAR segment into a full 15-week course that integrates both lecture and laboratory content. To address the current curriculum gap, we have seamlessly extended the RADAR exercises …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Validation Of Electromagnetic Shower Development In A Reduced Alice Focal-E Detector Model Using Geant4, Isaac Lara Romo

Physics

This project focuses on the preliminary simulation of a reduced FoCal-E detector model for the ALICE experiment at CERN. Beamline tests were simulated using an electron gun at various incident energies, and the results were compared with those of the FoCal group. The longitudinal charge deposition per sensor layer was compared between the two setups to verify that the reduced model exhibited expected calorimeter behavior. Additionally, the transverse signal across the high-granularity sensor layers was examined to determine whether the reduced model reproduced the expected lateral development of electromagnetic showers. The results obtained from these measurements show that the reduced …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …