Digital Commons Network^™

Sustainable Management Of Soilborne Pathogens In Strawberry Production Through Host Resistance And Sanitation Practices, Maria G. Alvarez Arredondo

Master's Theses

Strawberry production in California is significantly impacted by soilborne pathogens that reduce plant productivity and increase management costs. This research addressed management of these pathogens through two independent approaches: evaluation of host resistance in strawberry cultivars and assessment of sanitation practices for reducing pathogen movement between fields.

Macrophomina root rot, caused by Macrophomina phaseolina, was evaluated over two growing seasons (2024–2025 and 2025–2026) using field trials at California Polytechnic State University, San Luis Obispo. In Year 1, disease incidence varied widely among genotypes, with mortality ranging from 1.3% to 88.8% and an average mortality of 26.4%. Area under the …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Editors' Note, Editorial Board

Intertidal

No abstract provided.

Aged 539 Internship Report: Cal Poly Rodeo Media And Marketing, Anna Grace Durham

Agricultural Education: Graduate Internship Reports

This internship report examines the role of media and marketing within the Cal Poly Rodeo Program and highlights the integration of leadership, athlete development, and strategic communications in a collegiate athletics setting. Serving as the Media Manager for Cal Poly Rodeo, the internship focused on strengthening the program's digital presence, enhancing brand identity, and increasing community engagement, particularly surrounding the 2026 Poly Royal Rodeo. Through collaboration with University Administrators, the Officer Team, sponsors, and external media partners, comprehensive marketing campaigns were developed and implemented, resulting in significant increases in social media reach, audience engagement, and ticket sales. The project included …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Forged Carbon Fiber Adventure Project, Timothy Villafana, Victor Javadoff, Nathan Pittiglio, Cooper Starr

Mechanical Engineering

Forged carbon fiber compression molding remains a relatively under-researched manufacturing process. While there are documented processes online, the options are few and far between. Our sponsor and case-study user, Dr. Mello, tasked us with the goal of researching and developing a process for forged carbon fiber compression molding through means of modifying his prototype of a bike pack handlebar cradle (figure 3). This prototype will allow us to create tooling which will be used to manufacture a handlebar cradle that can withstand larger loads and more extreme environments using our developed process. A handlebar cradle is a structural support for …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.

Mechanical Jump Rope, Mary Harrington, Naail Lalani, Lucas Nathan, Guy Kalach

Mechanical Engineering

This Mechanical Jump Rope Senior Project was performed by four Mechanical Engineering students. This project was for the Cal Poly Kinesiology and Public Health Department, to be used by Cal Poly Friday Club, a collaboration between the San Luis Obispo Special Olympics and Kinesiology students. The purpose of the project was to allow those with different mental and physical abilities to learn and practice the timing of a jump rope at slow and adjustable speeds.

Guitar Pickup Testing Fixture, Koen Graue, Ethan Rezentes, Max Schecter, Timothy Webb

Mechanical Engineering

Small guitar pickup manufacturers and hobbyists have an interest in developing guitar pickups with unique tonal characteristics and responses, but currently lack a reliable way to test these pickups and characterize their sound. I.M. Bohannon Mechanical Design approached the team to develop a solution to this problem. In response, the team researched current technologies, customer needs, and existing products on the market to define the scope and requirements for a guitar pickup testing fixture. This report documents the work completed during the project scope and definition phase of Cal Poly's senior project process. It discusses researched topics and existing solutions, …

Pet Mobility Project, John Shelby, Lily-Rose Jolie Bacon, Andrea Yasmine Reyes

Biomedical Engineering

The Pet Mobility Project, sponsored by Terri Smith and Jasper Jackson, is an initiative aimed at providing a custom mobility aid to a pet in the San Luis Obispo community. Amber Rappozo’s young German Shepherd, LeDoux, was selected as the project’s recipient. LeDoux suffers from hindleg weakness and, as a result, has limited mobility. This document provides a comprehensive overview of the Pet Mobility Project, detailing the motivation, background, and design approach behind the development of a LeDoux’s custom mobility aid.

Cardiac Twitch Force Measurement System, Tara Hoffman, Sebastian Carrascal Gómez, Julian Macdonald

Biomedical Engineering

The goal of this project is to develop a low-cost and accurate force measurement system and method of measurement to be used in the testing of grown cardiac tissue samples. The primary stakeholder in this project is Dr. Luke Perreault, a biomedical engineering professor at California Polytechnic State University San Luis Obispo who is studying grown cardiac tissue rings, and any of his student lab personnel. Other stakeholders include other researchers in the tissue engineering field who require a similar form of testing to the methods developed in this project.

This document will introduce the identified problem and background as …

Los Banos Martial Arts Academy: A Web Platform For Structured School Communication And Enrollment, Vince Thanh Doan, Kayla Le

Computer Engineering

The Los Banos Martial Arts Academy communicates with its families through a combination of Instagram messages, WhatsApp group chats, emails, and phone calls that leads to missed messages and an unprofessional experience, made worse by an audience of parents who are not comfortable with technology. This project designed and built a centralized web platform that doubles as the academy’s public marketing site and as a private portal for enrolled families. The system uses invite-only, passwordless magic-link login, enforces structured communication rules that allow family-to-staff and group messaging but block private parent-to-parent messaging, and keeps a non-destructive data model so deactivating …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Pcb Design For Place Cells Vlsi Chip, Gavin Reaksecker, Alex Krier, Joshua Lin

Electrical Engineering

This project presents the design and implementation of a 2 layer test-bench printed circuit board (PCB) for evaluating the functionality of a custom 40-pin VLSI integrated circuit. The objective is to create a reliable and portable platform capable of supplying configurable bias voltages, generating variable input signals, and monitoring both analog and digital outputs. The board integrates adjustable bias networks using potentiometers, digital and analog buffering stages, and optional battery supply operation. The VLSI device under test is mounted in dual-in-line (DIP) sockets to enable rapid replacement and repeated characterization. Dedicated test points are incorporated throughout the PCB to facilitate …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Semi-Automated Wine Barrel Filler, Elliot Jason Dejong, Carlo Caesare Deianni, Brady Emerson J. Leib

Mechanical Engineering

The proposed project is a semi-automated wine barrel filler. Currently, there is no streamlined and affordable method for smaller wineries to fill wine barrels without dedicating complete focus to the task. The primary use is controlled filling for white wine fermentation, during which an air gap must be left in the barrel to allow for expansion of the wine during fermentation. Tom Greenough, Saucelito Canyon’s head winemaker, and associate winemaker Bodie Ringhofer are the primary stakeholders in our project and want to consistently fill barrels at their winery to a fluid volume of approximately 50 gallons each. This project serves …

25-26 Mecc: Magnetic Thread Wave Energy Converter, Adolfo Torres Flores, Maya Malay, Grayson Houghton, Chase Eavis, Ramyasree Kaja, Tyler Chin, Malia Merager, Chad Haines, Noah Borkum, Raina Moore

Mechanical Engineering

Remote coastal Alaskan villages face significant challenges accessing reliable and affordable electricity due to their geographic isolation and limited connection to central energy grids. These communities often depend on expensive and environmentally unsustainable diesel generators which are difficult to supply and operate. They require a new renewable, affordable, minimal maintenance power solution to decrease their reliance on fossil fuels and promote sustainable development in the region. Although several wave energy converters exist, none adequately suit the needs of these coastal villages, therefore a new design is required to support them. This project will be undertaken by three interdisciplinary teams made …

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Mobile Transfer Assist (Mta) Device, Ashley Homuth, Garrett Schnack, Will Bruner, Jacob Flores

Mechanical Engineering

The Mobile Transfer Assist (MTA) device was developed to assist caregivers with seated-to-seated transfers while reducing physical strain. The device uses a manually operated hand winch and pulley system to raise a user into a semi-standing position, allowing safe transfer between locations. The final design emphasizes portability, affordability, ease of use, and user safety through a modular frame, transfer sling, knee supports, and locking caster wheels. A verification prototype was fabricated and tested, demonstrating successful operation and compliance with project requirements established by VTC Santa Maria.

Hydropower Collegiate Competition 2026, Andres R. Arreola, Sammy D. Taporco, Kathryn E. Tinney, Ahmer S. Dhillon

Mechanical Engineering

The Hydropower Collegiate Competition (HCC) is sponsored by the Department of Energy’s (DOE) Water Power Technologies Office (WPTO) and is meant to offer university students an opportunity to solve complex hydropower challenges, build industry connections, explore career connections, and obtain a greater knowledge of hydropower’s potential in the United States. For this year’s competition, our team investigated a potential in-conduit hydropower site in California. Our work included creating a design package for a crossflow turbine related to our selected site and completing the community connections challenge. We also completed a siting and design report, community connections report, design and siting …

Ai Interview Helper: A Tool For Assisting Search And Rescue Long-Profile Interviews, Dylan P. Starink

Master's Theses

In Search and Rescue (SAR) operations, time pressure and limited interviewer experience can lead to missed opportunities when interviewing a missing person’s friends and family. This thesis presents a real-time, end-to-end system that provides context-aware follow-up question suggestions as interviews unfold. Leveraging large language models (LLMs) and agentic design patterns, the system is intended to support interviewers by helping them identify relevant follow-up questions and pursue potentially overlooked lines of inquiry.

The system was evaluated through three mock interviews with two SAR interviewer participants across two events. Given the limited sample size, the results provide early insights into the feasibility …

Teaching Multi-Core Architecture: Design And Implementation Of A Cache-Coherent Cpu For Undergraduate Education, Isaac R. Lake

Master's Theses

Modern computing has relied on multicore processors for high performance for nearly two decades, yet undergraduate computer engineering curricula often provide limited exposure to parallel hardware architectures and their design challenges. This thesis presents the design of CPE 433, a course that extends the pipelined and cached OTTER CPU developed in CPE 233 and CPE 333 into a multicore processor capable of running parallel workloads. The thesis documents the architectural changes required to adapt the verified single-core design into a multicore system, including MMIO-based interrupt support, a shared cache hierarchy with cache-coherence mechanisms, and clock-gated modules. It further presents a …

Practice-Oriented Seismic Design And Retrofit For Mid-Story Isolated Buildings, Luke Reilly

Master's Theses

This study reviews the state of the art of MSI and evaluates a practical framework for preliminary design using coupling coefficients. A database of 155 research documents is compiled and classified into analytical, mixed numerical, computational, experimental, and miscellaneous studies. The review identifies major research trends, common modeling approaches, important design parameters, and remaining limitations. In addition, 16 representative MSI building projects are reviewed. These applications show that MSI is most often used for retrofit, vertical expansion, mixed-use buildings, over-track construction, and buildings with major functional or structural discontinuities. The study then examines the Coupling Coefficients (CCs) Method as a …

A History Of The Underground Comix Scene: The Seriousness Of An Unserious Genre, Harris Darcie Shugart

Master's Theses

The Underground Comix Scene of the 1960s and 1970s was born out of an age of censorship. The Comics Code Authority, a regulatory body created by the Comics Magazine Association of America in 1954, established guidelines requiring publishing houses to self-regulate following a recommendation from the United States Senate Subcommittee on Juvenile Delinquency in 1953. Comix with an X, for their X-rated nature, represent an emerging counter-culture in the latter half of the 1960s and the 1970s, with an epicenter of San Francisco. These comix and their artists were not interested in obtaining the looming ‘Seal of Approval’ from the …

Greenhouse Scan-To-Bim, Mattheus Hsu-Ning Johnson

Architectural Engineering

This senior project focuses on the implementation of Scan-to-BIM software for capturing and modeling an existing building within Experimental Construction laboratory. The design of the project was to model the building using a 3D scan with the support of world measurements to document and create a digital model of the building. By doing this the project can evaluate the effectiveness, efficiency, and accuracy of integrating 3D scanning technologies into BIM modeling.

The project included taking data from a recent scan of the Experimental Construction Laboratory. We then took these scans and imported them to Autodesk Revit to develop a detailed …

Lidar At Poly Canyon, An Binh Chuong

Architectural Engineering

Poly Canyon serves as a living laboratory that reflects Cal Poly’s “Learn by Doing” philosophy through a collection of student-designed and student-constructed structures. Among these is Fratessa Tower, a reinforced concrete observation tower distinguished by its tripod support system, cable-suspended observation deck, and steel spiral staircase. The tower’s unconventional geometry and exposed structural system present unique challenges for documentation, making it well suited for evaluating modern reality-capture and modeling techniques.

This project focused on creating an accurate as-built Building Information Model (BIM) of Fratessa Tower using LiDAR-based scanning, field verification, and Autodesk Revit. Point cloud data were processed to reconstruct …

Reinforced Concrete Design Fundamentals, Belen Stephanie Martinez Espinoza, Estevan Jacob Perez

Architectural Engineering

Hispanic workers make up a large and growing portion of the construction workforce in the United States; particularly in California, the percentage of construction workers who are Hispanic is estimated to be about 55% as of 2021 (Elkins). Many of these workers are Spanish-speaking, yet there is still a gap between technical engineering design and what is understood and applied in the field. One major reason for this gap is the lack of clear bilingual resources. To bridge the gap, a 48-page bilingual booklet titled Reinforced Concrete Design Fundamentals (Fundamentos del Diseño de Concreto Reforzado in Spanish) was created. This …