Digital Commons Network^™

Creating Content For Prison Design Course: Nordic Countries Vs. United States, Calvin Steven Clauson

Construction Management

Since 2010, prisons in Nordic countries have begun to take a very progressive approach to rehabilitating prisoners, addressing prisoners more humanely than is traditionally done in the United States. This project aims to develop course content that looks at the design elements of prisons in the United States and performs a comparative analysis with more progressive Nordic prison designs. Cal Poly’s construction management department will incorporate the developed content into one module of a co-taught course with sociology. The course will examine the ways social changes impact the construction of prisons and the social impacts of design and construction on …

A Comparison Of Western And Eastern Soft Systems Approaches, John L. Anaya, John L. Anaya, John L. Anaya

Master's Theses

Soft System Approaches have been developed worldwide to help problem-solvers and decision-makers develop solutions to complex problems, such as aerospace systems. Soft System Approaches were designed to help lower the disorder of developing a complex system by increasing understanding of a situation. Four Soft System Approaches were investigated, two from the West and two from the East. Within the context of the paper, the West refers to thought patterns associated with thinkers and scientists in Europe and North America, and the East refers to those from and around China. The two from the West are Peter Checkland’s Soft Systems Methodology …

An Exploratory Framework For Benchmarking Vehicle Miles Traveled (Vmt) Estimates Associated With University Campuses, Troy Kawahara

Master's Theses

Although vehicle miles traveled (VMT) has become the standard for assessing transportation related impacts in California, some have concerns that many VMT estimates are not properly grounded or informed by real world data, potentially resulting in flawed estimates and impact assessments. This is especially true of special generators, like college and university campuses, which have complex travel patterns distinct from that of the general public. This thesis attempts to resolve a significant disparity observed between two credible VMT estimates for Cal Poly’s campus wide VMT. As part of a campus master planning effort, a VMT estimate was produced in 2019 …

Supersonic Air Inlet Modeling Using The Method Of Characteristics, Shay S. Takei

Master's Theses

The Air Inlet Method of Characteristics Analysis Tool (AIMCAT), a tool based in Python 3, is developed to model supersonic air inlet geometries during the early phases of design. The method of characteristics (MOC) is used to solve the governing equations for an inviscid, irrotational, isentropic, steady, supersonic flowfield. A comparison is made between modeling shock waves implicitly using Mach wave coalescence and modeling them explicitly using oblique shock relations. Multiple test cases are used to assess the accuracy of the tool by comparing to experimental wind tunnel data. Good general agreement was achieved over the majority of the supersonic …

3d Pano Inpainting: Scene Construction Using A Single Input Panorama, Shivam Asija

Master's Theses

Creating 360-degree 3D content has gained traction in the past few years, being used for Virtual Reality environments. However, creating such content is challenging because it requires a multi-camera setup or a collection of images from different perspectives. This paper proposes 3D Pano Inpainting, a pipeline capable of transforming a single equirectangular panoramic RGBD image into a complete 360° 3D virtual reality scene represented as a textured mesh. Our methodology is as follows: we estimate a consistent depth map for the input panorama; we use a pre built framework to convert the image and its depth map into a textured …

Improving Automatic Transcription Using Natural Language Processing, Anna Kiefer

Master's Theses

Digital Democracy is a CalMatters and California Polytechnic State University initia-
tive to promote transparency in state government by increasing access to the Califor-
nia legislature. While Digital Democracy is made up of many resources, one founda-
tional step of the project is obtaining accurate, timely transcripts of California Senate
and Assembly hearings. The information extracted from these transcripts provides
crucial data for subsequent steps in the pipeline. In the context of Digital Democracy,
upleveling is when humans verify, correct, and annotate the transcript results after
the legislative hearings have been automatically transcribed. The upleveling process
is done with the …

Finite Element Analysis Of The Bearing Component Of Total Ankle Replacement Implants During The Stance Phase Of Gait, Timothy S. Jain

Master's Theses

Total ankle replacement (TAR) implants are an effective option to restore the range of motion of the ankle joint for arthritic patients. An effective tool for analyzing these implants’ mechanical performance and longevity in-silico is finite element analysis (FEA). ABAQUS FEA was used to statically analyze the von Mises stress and contact pressure on the articulating surface of the bearing component in two newly installed fixed-bearing total ankle replacement implants (the Wright Medical INBONE II and the Exactech Vantage). This bearing component rotates on the talar component to induce primary ankle joint motion of plantarflexion and dorsiflexion. The stress response …

Spatial Drivers Of Soil Health In A Post-Fire Watershed, Reed Jd Williams

Master's Theses

Wildland fires are increasing in both severity and intensity leading to severe and lasting biogeochemical effects on soil. The CZU lightning complex started on August 16^th, 2020, and burned 86,509 acres causing severe social and ecological damage. To better understand the impact of fire on soil properties at the landscape scale, we created a digital soil mapping model with the inclusion of remotely sensed burn severity covariates. We combined a raster-stack of environmental covariates with rasters for fire severity and soil samples, to disentangle the relative contribution of fire to the spatial distribution of soil properties in the …

Assisted Delivery Device, Rachel Rowe, Madeliene Mumford, Jenna Eissmann, Brittany Trinh

Biomedical Engineering

Current devices used to assist in complicated births present serious risks to both the mother and the fetus, which has caused a decline in the use of these devices over the last decade. This senior project team has proposed an alternative device that interfaces with the infant’s shoulders that would decrease these risks and contribute to the decrease of unnecessary c-sections due to device inadequacy. This Statement of Work includes research on the downfalls of current devices, existing patents, customer requirements, engineering specifications, and a design plan through December of this year. The next phase of this project will include …

Hand Tremor Stabilizer, Krishna Sai Bathini, Ryan Herrmann, Madeleine A. Beaupre

Biomedical Engineering

The Hand Tremor Stabilizer project represents a significant advancement in assistive device technology, aimed at improving the lives of individuals affected by hand tremors due to conditions such as essential tremor or Parkinson's disease. Throughout the design process, our team engaged in a comprehensive approach that included rapid prototyping, iterative testing, and direct feedback collection from potential users. This process was instrumental in refining the device to meet specific user needs effectively.

Key customer requirements that guided the design of the Hand Tremor Stabilizer included ease of use, portability, washability, accuracy of motion control, comfortable grip, breathability, a natural feel …

Neonatal Respiratory Therapy Interface, Kennedy Austin, Evan Manley, Parker Murray, Harrison Oen

Biomedical Engineering

This Final Report reviews and outlines the scope, objectives, and deliverables for the BCPAP Interface Redesign project, aimed at enhancing the functionality, usability, and patient experience of the existing BCPAP interface. It also includes detailed testing results and manufacturing plans for the device prototype. The current system has challenges in universal usability, time constraints, and patient comfort, which this project intends to address effectively. The goal of this project is to reevaluate and redesign the interface of the bubble continuous positive air pressure (BCPAP) machine’s attachment site with the infant. Due to the millions of premature neonates and thousands of …

Student Solutions For Leaf Drying: A Collaborative Approach To Enhance Moringa Production In Ghana, Daniel Desoto

Construction Management

This paper expands on a project that seeks to address the need for an updated mechanical leaf drying system for local farmers in Ghana, Africa. Working with the local organization, Moringa Connect, we were able to connect and identify potential areas of improvement within the current existing system. This project involved aspects of design, fundraising, and the construction of a rotating metal hopper. This hopper was identified as a solution for a crucial pinch point currently seen in the processing of the leaves from a wet stage to the final dry product. The design and construction process had a multidisciplinary …

Executive Committee - Agenda 2/20/2024, Academic Senate

Academic Senate Agendas

No abstract provided.

The Mini Syllabus: Locating And Engaging With Black Women In Popular Culture, Katrina Marie Overby

Feminist Pedagogy

No abstract provided.

Coffee Cactus, Mackenzie Haneman

Graphic Communication

Coffee is one of the most well known and enjoyed drinks in the world. So many people go out to coffee shops to get work done, catch up with friends, or just to simply enjoy a local cup of coffee. Yet, many people find it difficult to bring that experience into the comfort of their own homes or have found tools that bring a personal and unique experience. Espresso machines, coffee tools, and unique terminology can be very intimidating for someone who is just starting to learn about coffee or wants to grow their own at home experience. The problem …

Construction Software: Use, Selection, And Performance In Low-Bid Contracting, David R. Cazares

Construction Management

The qualitative research included in this study evaluates the use, selection, and perceived gaps of current construction software suits in low-bid contracting. In addition, the data aims to provide merit to the correlation between construction software use and company performance. The intended stakeholders of this study include entrepreneurs in software development and construction, along with researchers looking to gather knowledge pertaining to this niche industry. Through a Google Forms questionnaire distributed via email, participants provide insight on the current status quo. The study’s responses show clear trends in the types of software currently in use and the subsequent reasons for …

Balloon Boy, Willow Faust

Intertidal

No abstract provided.

Bankrupt, Adam Mercer

Intertidal

No abstract provided.

Aged 539 Internship Report: Improving Cal Poly Rodeo Horses' Health And Fitness, Faith Star Mahallati

Agricultural Education: Graduate Internship Reports

This study was conducted to help enhance the overall health and fitness of the horses on the Cal Poly Rodeo Team. Data was collected before and after implementing the StallGrazer feeders to reduce the risk of sand colic and improve feed efficiency. Data was collected and analyzed before and after the weekly barrel racing jackpot series to enhance horse fitness. The StallGrazer feeders reduced the risk of sand clear and forage waste and the barrel racing jackpots enhanced the fitness and performance of the horses in the test group.

Humility And Charismatic Leadership: A Boost Or Bust For Leadership Outcomes In The Russian Context, Stern Neill, Raghuvar Dutt Pathak, Titov Sergei, Reinout E. De Vries, Vipin Gupta, Zafar Husain

Marketing

This study unpacks how leader humility and charisma are related to leader effectiveness and satisfaction with the leader and examines how the need for leadership may moderate these relationships. We used data from 252 respondents from Russian companies in a 2 (high vs. low leader charisma) × 2 (high vs. low leader humility) vignette design in which levels of charisma and humility were manipulated. While leader humility was found to have a positive effect on satisfaction with a leader, no significant link between leader humility and leader effectiveness was observed in this study. Leader charisma was positively related to leader …

Ungrading: Reflections Through A Feminist Pedagogical Lens, Erin M. Eggleston, Shelby Kimmel

Feminist Pedagogy

Ungrading is a pedagogical approach in which no grades are given on any assignments. Instead, students are provided with many opportunities to submit work and gain feedback. The goal is to shift student focus from achieving a grade to growth as a learner and a person. As instructors, our ungrading approach utilized personalized learning plans, checkpoint reflections, and student-professor learning conferences to put agency in the hands of our students. We employed this method in upper-level biology and computer science courses and provide critical reflections here regarding our experiences and the connections between this approach and feminist STEM pedagogy tenets. …

Feminist Pedagogy In The Stem Research Laboratory: An Intersectional Approach, Eduardo J. Caro-Diaz, Marie L. Matos-Hernández, Grayce E. Dyer, Siribeth Lopez-Santana, Laura S. Torres-Rivera, Lara G. Laureano-Llorens, Naiara Lebron-Acosta, Victoria M. Casimir-Montán

Feminist Pedagogy

The research laboratory is a crucial and indispensable classroom for STEM education. It is where we practice science as a craft and test the ideas that awaken our curiosity, allowing us to create knowledge. It is also a space where challenges await and struggles are imminent. Thus, supporting mentees through their traineeship in a research lab requires an intersectional approach and lens to provide equitable mentorship and guidance. The concept of intersectionality, initially devised by Black feminist professor Kimberlé W. Crenshaw, can be employed to generate practices and frameworks that democratize laboratory culture and provide trainees with a space in …

Evaluation Of Polyvinyl Alcohol (Pva) For Electrospinning Utility In The Blood Vessel Mimic (Bvm) Lab, Logan Vandenbroucke

Master's Theses

Electrospinning has provided the opportunity to create extracellular matrix (ECM) mimicking scaffolds for the development of tissue-engineered constructs. Within Professor Kristen Cardinal’s Blood Vessel Mimic (BVM) Lab, at Cal Poly, there exists a constant demand for innovation and the expansion of polymer types and electrospinning capabilities for its BVM model. Along these lines, the BVM Lab has recently acquired two new electrospinning systems: the Spinbox, a commercially graded electrospinning system, and the Learn-By-Doing system, which was part of a recently completed thesis conducted by Jason Provol. Additionally, recently published literature has demonstrated polyvinyl alcohol (PVA) as a viable option for …

Effects Of Beet Supplements On Cardiovascular Response Using A Noninvasive Blood Pressure Cuff, Nicholas M. Hughes

Master's Theses

A Calibrated Cuff Plethysmography device was built, tested for verification, and used to experiment on human subjects to measure the cardiovascular response of consuming a beet supplement, specifically looking at arterial compliance and pressure-area curves. Each subject was tested four times. A baseline was measured under normal conditions and after five-minute hyperemia conditions. 10 subjects were given 6 ounces of water mixed with either purple Kool-Aid (control), a SuperBeets supplement, or a SuperBeets Sport supplement and after 45 minutes, measurements were taken undergoing normal and hyperemia conditions once more. The verification testing demonstrated the calibration of the device was effectively …

Fifty-One Years Later: A Case Study On Title Ix Implementation Practices Of The Ncaa, Reece Jason Wisler

Experience Industry Management

Since the implementation of Title IX, the law has increased opportunities for female participation in intercollegiate athletics and changed the perception of women's sports. The purpose of this study was to examine the practices that the National Collegiate Athletic Association (NCAA) implemented to support Title IX. The methodology of the case study was to create research questions and an instrument that was utilized to guide the researcher when collecting data. The findings of the study concluded that the governmental structure of the NCAA lacks the necessary power to implement policies that support Title IX, but the committees within the organization …

Perturbation Based Decomposition For Motor Unit Number Estimation, Anna T. Pham

Master's Theses

Motor unit number estimation (MUNE) is of clinical significance because information associated with motor unit populations and the loss of motor units over time are crucial to the diagnosis and monitoring of neuromuscular disorders. The responses of individual motor units can be extracted through incremental stimulation of a muscle group of interest and further analyzed through various methods to compute the MUNE. In this work, the utility of the perturbation-based decomposition by Szlavik will be investigated for this application and compared to the original MUNE approach developed by McComas. Successful decomposition may suggest an alternative method for motor unit number …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Dc To Ac Inverter For A Microgrid-Inspired Power Distribution Architecture For Electric Vehicles, Bryan A. Carrillo Martinez, Eli Blacklock, Paul A. Samson, William S. Holt-Hillis

Electrical Engineering

This project builds upon the prototyping of a microgrid-inspired power distribution architecture for electric vehicles (EVs). The efficacy of this prototype aims to inform a full-scale power distribution system that charges an EV battery, supports the electric grid with important ancillary services, performs peer-to-peer EV charging, and works in conjunction with other AC and DC sources and loads. The scope of this report focuses specifically on the design, construction, and testing of the DC/AC inverter. Future development of this distribution architecture will incorporate synchronous generators, a battery management system, and an Arduino/Raspberry Pi-based communication system to fully simulate an electric …

Digital Filter Implementation On A Dsp Development Board, Tien Le, Helen Zhang

Electrical Engineering

This project to implement digital filters on a Digital Signal Processor (DSP) development board intends to demonstrate viability for future use in teaching digital signal processing lab courses. The digital filter types covered, including Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) filters of various basic frequency responses, will mirror current DSP lab projects to fulfill course learning objectives for filter design and characterization. Design features will include speed optimization to enable real-time digital signal processing. This project will investigate the use of Code Composer Studio to compile C and assembly code to the DSP. Alternatives for currently available …

4-Band Personal Eq Device, Carson Kellerman

Electrical Engineering

The device is a 4-band EQ with 3.5mm audio input and output jacks. The device has 4 adjustable EQ bands. Each of the 4 bands are adjustable via knob potentiometers, and are able to boost or cut their respective center frequencies of 150Hz, 400Hz, 2500Hz, and 10kHz from -15dB to +15dB. The device is battery powered off of 1 9V battery and is able to function for 10 hours before needing to replace the batteries. The device has a Total Harmonic Distortion of less than 1% and a Signal to Noise Ratio greater than 60dB. Overall, this device allows music …