Digital Commons Network^™

Recycled And Waste Glass As A Sustainable Substitute For Aggregates And Cement In Concrete, Griffin Powers Finnane

Construction Management

Besides water, concrete is the most widely used material in the world. The production of Portland cement, the most crucial ingredient in a concrete mix, significantly contributes to global carbon dioxide emissions, accounting for 7-8% of the total. The majority of these emissions result from the cement production process, which involves kilns powered by greenhouse gas-producing sources. Additional emissions come from the heavy diesel equipment used to load and haul aggregates to batch plants. Although the construction industry is adopting more sustainable building techniques and materials, the basic concrete mix remains largely unchanged, continuing to contribute heavily to carbon emissions. …

Gateway Decathlon: Carbon Calculations Of An Offsite Residential Construction, Isaac Robert Rubio

Construction Management

This senior project delves into a comprehensive calculation of carbon emissions for both efficiency and sustainability within the realm of modular construction. A material takeoff of the building was performed, allowing for an accurate measurement of materials and their respective EPD (Environmental Product Declaration) values. After material selection, a final carbon calculation of the building was calculated. Carbon emission calculations were performed on the current Revit Model allowing for a full-scale analysis, from Cradle to Gate, of the offsite residential unit. The results show that the total initial embodied carbon emissions of the unit is 9241 (kg-CO2e), representing the total …

Optimizing 3d Printed Concrete Effificeny: A Case Study Of Emergent 3d'S Iterative Process Improvement, Michael Stearns

Construction Management

This case study looks into the advancement of 3D printed concrete (3DPC) technology and its application by Emergent 3D, a company dedicated to addressing California's housing crisis through low-cost, sustainable construction. Emergent 3D, which was formed in response to the 2018 Carr Fire, uses 3DPC to quickly and economically design energy-efficient homes. Unlike traditional construction processes, 3DPC constructs buildings or walls layer by layer using computer-generated designs, reducing material and labor expenses. This case study focuses on Emergent 3D's first project, Enterprise Park, which gave them significant insights on improving the 3DPC process. This case study identifies crucial improvements in …

Skip The Grid: Bringing Power To Navajo Nation Students, Colette Burd

Construction Management

Skip the Grid is an annual joint initiative facilitated by the non-profit Heart of America involving California Polytechnic State University, San Luis Obispo (Cal Poly) students and faculty, and SOLV Energy. The Skip the Grid project brings power and lighting to Navajo Nation families with school-age children by installing a self-contained solar battery system. Completed from March 24th through March 28th of 2024, this year the Skip the Grid project brought photovoltaic energy systems with solar panels, a battery, lights, and outlets to 24 homes, benefiting over 100 students in the Consolidated School District within the Navajo Nation. For the …

Slo Newman Catholic Center - Holy Monument, Luka Kosor

Construction Management

The SLO Newman Catholic Center is a Catholic Church that serves the students of Cal Poly San Luis Obispo and Cuesta College. Around 300 students attend Catholic Mass every Sunday here. While searching for a Senior Project, I approached the Priest and Admin staff of this organization and asked if there was anything I could build for them. They informed me they were gifted this tile mosaic of the Lady of Guadalupe they wanted to showcase in their backyard. They asked me to design and build a holy monument that could exhibit this beautiful tile mosaic. After 6 months of …

Feasibility Of Implementing A Construction Project In An International Country, Kristina Poliseri

Construction Management

This paper examines the execution of an international service project involving the construction of a complex system. It explores three distinct approaches assuming a fully designed system: building the system in the U.S. and shipping it internationally, having system pieces constructed entirely in the destination country prior to arrival for assembly, and developing a prototype in the U.S. followed by the construction of a full-scale system in the international country. Each method presents unique advantages and challenges. Building in the U.S. ensures high quality, advanced technology, and meeting tolerances, however, leads to significant fees, shipping costs, and logistical complications. Constructing …

Thinking Styles In The Built Environment, Jaden A. Green

Construction Management

Effective communication in the built environment is crucial for project success, information relay, goal alignment, error prevention, and safety. Diverse parties, including general contractors, architects, engineers, and subcontractors, bring varying Thinking Styles to the table, as defined by Harrison and Bramson. These styles—Synthesist, Idealist, Pragmatist, Analyst, and Realist—impact collaboration and conflict within projects. This study aims to explore where thinking differs among these parties and the congruity of Thinking Styles within each group. Results of this study indicate a predominant Realist Thinking Style among general contractors and subcontractors with subcontractors equally leaning towards Analyst. Engineers, although expected to be Analysts, …

Leaning Pine Arboretum Gazebo- Phase 1: Preconstruction, Layout, Material Procurement, Hunter Froud, Aleena Panchal

Construction Management

This essay outlines the thorough preconstruction procedure that went into building a pavilion in the university's Leaning Pine Arboretum. Every step that our team took, from the preliminary surveying phase to the foundation laying prior to frame, is painstakingly planned and carried out. The main objective is to create a dynamic area that effortlessly combines education and recreation; it should be both a lively meeting place and a haven for students to study under cover. The team took a calculated risk to make sure our pre-construction phase was successful. This included carrying out thorough quantity takeoffs, keeping lines of communication …

Slo Water Treatment Facility Grill Retrofit, Liam Dolan

Construction Management

The San Luis Obispo Water Treatment Facility is a vital facility that provides water to all of San Luis Obispo. The facility runs twenty-four hours a day and constantly has long shifts for those who work there. The water treatment facility has a small, rusted Santa Maria grill that is rarely used because of its condition, and they were in need of a new grill that employees could use to make lunches. The water treatment facility has plans to build an outdoor dining space for employees, and my goal for this retrofitted grill project is to help enhance that space …

Drone Applications In Residential Construction, Leo Geiger

Construction Management

Drones, or unmanned aerial vehicles (UAVs), have revolutionized various industries since their creation, particularly in construction. Originally used for military and recreational purposes, drones began to find their place in construction in the early 2010s, primarily for surveying and mapping. While tons of research has been conducted on drones' capabilities in surveying, there is a gap in studies focusing on their applications for general contractors, particularly in large-scale developments. Five interviews were conducted, three with general contractors who have integrated drone technology into their teams and two drone companies that provide subcontracted drone services. Through these interviews, the primary applications …

Gps/Imu Board, Luke Chen, Steve Tran

Electrical Engineering

Providing information on a vehicle’s location during a competition can be used to provide greater insight to progress the car is making or what portion of the track caused failure. As a result, we will be designing a board that includes a Global Positioning System (GPS) and Inertial Measurement Unit (IMU) module to provide position coordinates, which is driven by an STM32 processor to feed into the DAQ through Controller Area Network (CAN) protocol.

The GPS module will produce an initial positioning and will continue to do so unless it is unable to create a solution, possibly due to over-arching …

2-Channel Eeg Neurofeedback System, Tim Erwin, Donna Nikjou, Sebastian Turkewitz

Electrical Engineering

This work describes the design of an EEG-based neurofeedback system which provides users with real-time feedback on their level of focus or relaxation. By analyzing the spectral content of the brain activity measured via scalp electrodes, focus and relaxation levels can be quantified. Based on these measurements, live feedback in the form of moving bar graphs is provided to users, allowing them to gain awareness of their mental-state and more efficiently learn how to consciously relax or focus. This project covers the design of the system, including amplification and filtering stages, digitization, and signal processing. The system interfaces with a …

Generative Data Augmentation: Using Dcgan To Expand Training Datasets For Chest X-Ray Pneumonia Detection, Ryan D. Maier

Master's Theses

Recent advancements in computer vision have demonstrated remarkable success in image classification tasks, particularly when provided with an ample supply of accurately labeled images for training. These techniques have also exhibited significant potential in revolutionizing computer-aided medical diagnosis by enabling the segmentation and classification of medical images, leveraging Convolutional Neural Networks (CNNs) and similar models. However, the integration of such technologies into clinical practice faces notable challenges. Chief among these is the obstacle of acquiring high-quality medical imaging data for training purposes. Patient privacy concerns often hinder researchers from accessing large datasets, while less common medical conditions pose additional hurdles …

Impact Force Helmet Device For Concussion Monitoring, Patrice Mulligan, Karina Mealey, Zack Borthwick, Benjamin Fick

General Engineering

To track head trauma in football, our device is placed inside a football helmet to measure both linear and gyroscopic (rotational) accelerations. These measurements are taken using an ADXL375 linear accelerometer and an LSM6DSOX accelerometer and gyroscope. The data from these sensors is processed and transmitted wirelessly by a SparkFun Thing Plus microcontroller to another SparkFun Thing Plus microcontroller connected to a laptop on the sidelines. Our program on the laptop stores the acceleration impact data into a .csv file for each player. If a likely concussive impact is detected, the program displays a popup warning. Testing results were promising …

Sim Racing Pedal Assembly, Ben Wold, Owen Clobes, Angel Perales, Mike Mcmasters

Mechanical Engineering

At an increasing rate, professional and amateur race car drivers are utilizing simulated racing as a training aid and even a substitute for real-life car racing. The team’s objective in this project was to create a sim racing pedal assembly aimed at filling this gap in the industry, aided by Justin Jang of Data Driven Racing LLC. The project resulted in a fully operational throttle and brake pedal which incorporated dual spring brake pedal resistance system and radial displacement sensor in the throttle. By collecting real race car data and selecting and testing spring setups based on this real data, …

Northrop Grumman Collaboration Project, Dominic De La Mora, Michael C. Hartley, Allison Lee, Chase Pietro, Seamus Robinson

Mechanical Engineering

The Northrop Grumman Collaboration project, emphasizing the Mechanical Engineering Senior Design team, is focusing on developing the Fire Response Aircraft (FRA) for the autonomous search and rescue system. The goal of this aircraft is to scan a predefined flight path and locate a simulated fire in which other vehicles will respond to the area. This Final Design Review report highlights the overall design, manufacturing, testing, and discussion of the final prototype. Any new changes to the final design since the Critical Design Review report are noted and include appropriate justification. The manufacturing processes for each component are outlined in detail …

Rover On A Chip (Roach) Debris Utility & Solar Shell Technology (Dusst), Joshua Aaron Tuttobene, Jacquelyn Rose Banh, Nathan Christopher Chapman, Tanner Casey Wells

Mechanical Engineering

The Rover on A Chip project’s Debris Utility and Solar Shell Technology team’s final design is outlined in this document. Starting with the design of our system, this document highlights important progress made since the Critical Design Review and fully describes our final design and verification of our final prototype. We then justify these design choices by testing multiple functionalities and conditions to ensure they will meet all of our specifications. Next, we describe in detail our procurement manufacturing method for the project. Lastly, we wrap up by discussing recommendations and the next steps for the project moving forward.

Since …

3d-Printed Remote Controlled Aircraft, Sebastian Bessoudo, Jose Ramirez, Manny Ruiz, Andrew Edwards

Mechanical Engineering

The Senior Project for the 3D Printed Aircraft presents a compelling challenge to the team: design and fabricate an aircraft for the Cal State LA 3D-Printed Fixed-Wing Aircraft Competition, comprising three distinct events: Flight, Design, and Simulation. The objective of the flight competition is to achieve the longest flight duration, while the design event emphasizes innovation and originality. In the Simulation contest, our aircraft's CAD model undergoes Computational Fluid Dynamics analysis to assess its aerodynamic performance. These competitions are slated for May 2024.

While building the aircraft has its limitations due to the source of our construction being only 3D …

Snap It & Send It, Samantha Gonzales, Brienne Berger, Kelsea Clays, Jessica Schmok

Mechanical Engineering

This report details the final design, manufacturing and assembly, testing procedures and results, as well as future design recommendations of a device aimed at enhancing the mountain biking experience for individuals with limited thumb strength. This project particularly focused on the experience of our sponsor, Cal Poly Mechanical Engineering Professor Andrew Kean. Our team's objective was to create a secure, ergonomic handlebar grip system that does not require thumb strength and is adaptable to various mountain bike models. The final design utilizes a rigid hook that snaps onto mountain bike handlebars with a long, flat piece that slides into a …

Miniature Train Engine, Jason Patrick Lacson Del Castillo, Renato Andrew Dilauro, Sophia Theresa Tiu, Robert John Pallares Iii

Mechanical Engineering

This report details the redesign of the Mini Train Prop for the SLO Civic Ballet’s The Nutcracker, aiming to create a lighter, more user-friendly, and easily maneuverable train. The Final Design Review (FDR) includes the design process, manufacturing plan, and justifications for decisions made. Key improvements are reducing the train's weight, automating the fake wheels, and enhancing maneuverability with a neutral pin and lever system. In this report we detail the significant changes since the Critical Design Review (CDR). The implementation covers procurement, manufacturing, and assembly, while design verification ensures compliance with cost, weight, turn radius, and structural integrity specifications. …

Hydropower Collegiate Competition, Neel Bhargava, Connor Stoll, Cameron Brosnahan, Tobias Coughlan

Mechanical Engineering

As part of our team’s participation in the 2024 Hydropower Collegiate Competition, our team constructed and iterated a small-scale Kaplan turbine using a custom-designed test rig and dynamometer. While our model was vastly simplified from what is used in the real world, the process gave us exposure to design procedures and hydrological techniques for turbine design. Crucially, we learned that while analytical models and theory are valid tools as starting points, the use of computational and experimental models is key to developing sound designs.

In the end, our group was able to produce a Kaplan turbine with a peak efficiency …

Bird Trail Stairway Access Replacement, Mackenzie Wright, William Spellman, Nicholas Buccino, Jack Long

Mechanical Engineering

Dana Adobe & Cultural Center, a non-profit organization in Nipomo, California, seeks to restore access to the Bird Trail located on their site. This project aims to design and manufacture a replacement stairway for safe creek bed crossing on the trail. Within this document, we have detailed our system design, function, and justification for our design. The procurement, manufacturing, and assembly plan have been outlined along with tests we completed.

One of the most important functions of our design is for the structure to be retractable so that it can be removed from the creek bed when needed. To address …

Animatronic Lego Girl Scout, Jared Sinasohn, Filippo Maresca-Denini, Jacob Lantin, Sean Nakashimo

Mechanical Engineering

This Final Design Review Report provides a comprehensive overview of our Senior Design Project, with a focus on the testing, modifications, and final design of our animatronic robot. The primary objective was to ensure the robot met the sponsor's requirements through rigorous final testing and targeted enhancements. Significant updates include enabling the robot to display the Girl Scout salute, wave, and give a low five. Throughout the design process, critical milestones were achieved, such as the complete assembly of the robot frame and securing it onto the platform, allowing the robot to perform its programmed actions effectively. The implementation of …

Interactive Storytelling And Game Design, Augustus J. Soto, Rithvik S. Ram

Liberal Arts and Engineering Studies

A deep dive into the methods used in interactive fiction to tell compelling stories through the medium of game design and programming.

Design And Characterization Of A Broadband Rf Switch Utilizing Surface Mount Devices, Daniel Bracamontes

Master's Theses

High frequency solid-state switches are critical elements in communication systems, radio frequency (RF) systems and instrumentation. Key parameters to an RF switch include insertion loss while on and off-state isolation. Power handling and linearity are important to consider for a cost-effective construction. This becomes a design challenge into K-band frequencies as components required need to be small, dielectric losses and transmission lines need to be physically matched for proper isolative and through states. This thesis presents a novel single pole eight throw (SP8T) hybrid design composed of commercially available surface mount technology solutions to achieve high isolation and low insertion …

Hydrologic Response Of Meadow Restoration Following The Removal Of Encroached Conifers, Oriana Ramirez

Master's Theses

Meadows are important within forest ecosystems because they provide diverse species habitats, facilitate water cycling, help with sediment capture, aid in carbon sequestration, and create natural fire breaks in forested regions. However, fire suppression, poor grazing practices, and climate change have accelerated the encroachment of conifers into historical meadow habitat. This has led to an extensive loss of meadow habitat within the Sierra Nevada and Cascade Mountain Ranges. Therefore, the purpose of this study is to quantify changes in percent soil moisture and groundwater levels following the removal of encroached lodgepole pine (Pinus contorta) in a historic meadow habitat …

Emerging Diseases, Abiotic Disorders, And Macrophomina Root Rot Management Of California Strawberry, Cooper Calvin

Master's Theses

Strawberry is an economically important crop in California, with an estimated value of $2.68 billion in 2023. In California strawberry production, mitigation of low plant health and yield often focuses on major soilborne pathogens, while the contribution of minor pathogens and abiotic disorders to production shortcomings are often overlooked. The objectives of the first project in this thesis are to determine the pathogenicity of multiple minor pathogens and quantify other biotic and abiotic factors that can reduce plant health such as viruses and soil salinity. Two pathogens of the black root rot complex, Pythium spp. and Rhizoctonia spp. as well …

Artificial Intelligence For Mitigation Against Array Perturbations In Direction Of Arrival Estimation, Mathew Shaham

Master's Theses

Direction of Arrival (DOA) estimation with digital arrays under unknown Gaussian distributed element location perturbation has detrimental effects to the performance of traditional DOA estimation techniques. This work proposes an artificial intelligence (AI) approach as a solution to this problem. A Deep Convolutional Neural Network (DCNN) is proposed and experimentation into network parameters, classification networks, and how the DCNN is applied to the DOA problem are studied. It is shown that this AI based approach is successful in estimating the DOA with perturbed arrays where traditional approaches fail.

Design And Assembly Of A Variable Buoyancy System For An Autonomous Underwater Vehicle, Evan Brown

Master's Theses

Autonomous underwater vehicles (AUVs) play a vital role in the surveillance and mapping of our oceans, often requiring extensive travel in extreme environments. These data-gathering missions benefit from extended durations, making the minimization of power consumption a key consideration in AUV design. One effective strategy to reduce energy use in AUVs is to implement a variable buoyancy system (VBS) for depth control. The purpose of this work is to design, develop, test, and model a variable buoyancy system to enhance the efficiency and capabilities of a high-speed, long-range AUV.

After evaluating various VBS designs, a piston-cylinder buoyancy system was selected …

Non-Linear Modeling Of Hysteresis In Piezoelectric Actuated Cantilever Beam Using The Bouc-Wen Model, Andrew Donald Maas

Master's Theses

Piezoelectric actuators frequently exhibit a time-dependent behavioral phenomenon known as hysteresis, resulting in a lag in the deformation of the actuator compared to linear models. The presence of hysteresis complicates control systems involving piezoelectric actuators. However, traditional modeling methods for piezoelectric actuated smart structures often treat the piezoelectric patches as linear actuators without considering hysteresis, leading to suboptimal controller performance.

This thesis aims to establish a comprehensive model by integrating the Euler-Bernoulli beam bending model with the hysteresis dynamics induced by two opposing piezoelectric patches attached to a beam. A model expansion method is employed to transform the partial differential …