Digital Commons Network^™

Modular Construction And Integrated Project Delivery: Cal Poly Slo’S Student Housing Expansion, Nikita Taktarov

Construction Management

Cal Poly San Luis Obispo is addressing the increasing demand for on-campus housing through an innovative modular dormitory project. This project, which adds approximately 4,000 new beds, marks a shift from traditional construction methods to a more efficient and collaborative approach using the Integrated Project Delivery (IPD) model. Unlike traditional CSU contracts that place most of the risk on contractors, this model promotes shared responsibility between the university, architects, and builders, leading to better cost control and project efficiency. A key feature of this program is the use of prefabricated construction, where building components are assembled off-site and then transported …

Cal Poly Construction Spanish Class, Josue E. Basilio

Construction Management

This project develops a Construction Spanish & Communication course for Cal Poly’s Construction Management program to address the growing need for bilingual communication on job sites. The course equips students with essential Spanish language skills for safety meetings, work instructions, and team coordination, improving job site efficiency and inclusivity. Deliverables include a detailed course outline in preparation for the semester conversion, curriculum, course catalog entry, and a first-day lecture presentation. The course blends lecture-based instruction with hands-on activities like role-playing, translation exercises, and real-world simulations. Assessments include scenario-based quizzes, a reflection essay, participation grading, and a final exam to ensure …

Development Of A Work Plan For The Mass Timber Installation Phase In The Gateway Decathlon, Eduardo Contreras

Construction Management

This project was the development of detailed work plan for the installation of mass timber components in the Gateway Decathlon project, which emphasizes sustainable construction practices aimed at reducing environmental impact. The work plan provides a step-by-step guide for the efficient and safe assembly of structural elements, covering the sequence of tasks, necessary materials and tools, safety procedures, and quality checks to ensure proper execution. By connecting theoretical design concepts with practical construction activities, the plan addresses various logistical challenges encountered during building phases. It highlights the advantages of using mass timber, such as reduced carbon emissions and reliance on …

The Utilization Of Ai To Improve Efficiency In Construction Management, Sam Balestreri

Construction Management

The construction industry is undergoing a technological transformation, with artificial intelligence emerging as a tool to enhance efficiency, communication, and decision-making. However, the industry has been slow to adopt these advancements due to challenges in integrating new technologies with traditional workflows. This research examines the potential of AI to improve construction management by automating processes such as submittal logs and scope of work documents. The study evaluates ProjectEngineer.ai, an AI-powered co-pilot, to determine its impact on workflow efficiency, writing enhancement and precision, and project outcomes. An analysis of AI-assisted document management methods was conducted in CM 411 Specialties Construction Management, …

Executive Committee - Minutes, 2/18/2025, Academic Senate

Academic Senate Minutes

No abstract provided.

Constructing Madness In The Era Of Synthesis: Madness In Medieval Western Europe, 12th-15th Centuries, Amy R. Gavello

The Forum: Journal of History

No abstract provided.

Charlottesville And Confederate Monuments: How The Civil War And Its Aftermath Continue To Affect Race Relations In The United States, Jesse Lozano

The Forum: Journal of History

No abstract provided.

When You Lie, Anonymous Author

Intertidal

No abstract provided.

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Building Design - Bsc App Tools For Light, Color, Vision, Daylight And Artificial Light, Jens G. Pohl

Architecture

Relationship to Building Science (BSc) App: In the domain of Building Science (BSc), this paper focuses on natural and artificial lighting concepts and design principles that should be considered during the early stages of building design. It provides direct access to a BSc App that offers more than 420 calculation and information functions (https://research.chobugroup.com/buildingscience/analyzer /) in the entire range of building science areas, comprising daylighting, artificial lighting, noise control, room acoustics, climate and thermal comfort, solar energy, and structural systems.

Information Content: The paper briefly explains the principles of physics that underlie light, color and vision at a level that …

Building Design - Bsc App Tools For Thermal Comfort, Control, Heat Flow And Solar Energy, Jens G. Pohl

Architecture

Relationship to Building Science (BSc) App: In the domain of Building Science (BSc), this paper focuses on thermal comfort fundamentals, climate concepts and design principles, and solar energy opportunities that should be considered during the early stages of building design. It provides direct access to a BSc App that offers more than 420 calculation and information functions (https://research.chobugroup.com/buildingscience/analyzer/) in the entire range of building science areas, comprising daylighting, artificial lighting, noise control, room acoustics, climate and thermal comfort, solar energy, and structural systems.

Information Content: The paper briefly explains the principles of biology and physics that underlie thermal comfort at …

Analyzing The Safety Effects Of Edge Lane Roads For Motor Vehicle Users, John Yang

Master's Theses

This thesis builds upon a prior study that analyzed the safety effects of Edge Lane Roads (ELRs) within the U.S. context, addressing gaps related to collision, traffic volume, and speed data. An ELR is a roadway configuration that accommodates two-way automobile traffic within a single center lane while providing edge lanes for vulnerable road users (VRUs), i.e., bicyclists or pedestrians. Although the concept of a single shared lane for opposing traffic often raises safety concerns among the public, ELRs have demonstrated potential to control speeds, optimize roadway space, and improve traffic operations on low-volume roads.

To evaluate safety outcomes, this …

Design And Testing Of A Prototype Prosthesis For Pediatric Upper-Limb Transradial Amputees To Provide Adjustable Size And Modular Characteristics, Paul Heli

Master's Theses

This study was conducted to develop a financially accessible body-powered upper-limb prosthetic socket that can be adjusted to maintain fit and function for a growing child with a transradial amputation. The main objectives of the study were to design, manufacture, and test a device that was comfortable, functional, affordable, and adjustable. The socket was designed to be comfortable using global variables controlling the computer-aided design (CAD) model size with user-specific measurements. Comfort was also incorporated using shape-forming of the socket for specific residual limb features. The device was designed to perform the two main functions of suspension, or attachment to …

Aged 539 Graduate Internship Report - Live Oak High School, Savannah L. Burnett

Agricultural Education: Graduate Internship Reports

This report documents the implementation and outcomes of a comprehensive agricultural education program at Live Oak High School, aligning with California Career Technical Education (CTE) standards. The project focuses on enhancing student engagement through curriculum development, leadership activities, Supervised Agricultural Experiences (SAEs), and career readiness initiatives. Key components include expanding pathway offerings in horticulture, mechanics, and agricultural sciences, integrating field experiences, and hosting guest speakers to connect students with industry professionals.

Rover Chassis & Suspension, Nikki Zainer, Aung Bhone Zaw, Joelle Romero, Colin Thompson

Mechanical Engineering

The Mars rover project is part of the University Rover Challenge (URC), a robotics competition organized by the Mars Society that tasks student teams with designing and building the next generation of Mars rovers. Cal Poly Human Space Technology and Research (CP-HSTAR) has inherited a rover developed by a previous senior design team.

This report documents the progress made in refining the rover’s structure, highlighting key specifications, and detailing design improvements aimed at enhancing the suspension’s structural integrity, improving wheel traction, increasing modularity, and developing an enclosed chassis for electronic components.

This report includes a detailed breakdown of the rover’s …

Perceptual Hash Based Content Matching, Nicholas Daniel Chenevey

Master's Theses

The proliferation of video content and AI generated imagery has introduced a number of new challenges in content identification and verification. The ability to trace content back to its source has become a critical problem as video content increases both naturally and synthetically through AI generation. This thesis provides the design, analysis, and experimental verification for a perceptual hash based framework aimed at addressing these challenges. Perceptual hashing is a method for encoding the visual content of images into compact and easily comparable binary strings. This process is used as the foundation for content matching in videos and source verification …

The Integration And Validation Of A Class 3b Laser For Stereo Particle Imaging Velocimetry, Jensen Lam

Master's Theses

Particle Imaging Velocimetry (PIV) is a laser flow diagnostic measurement technique used to measure spatial and temporal velocity fields. In an effort to promote experimental aerodynamic research, specifically an entry point for students to learn Particle Imaging Velocimetry, an in-house Class 3B laser PIV system was developed and its experimental results were verified with a Class 4 laser. Both systems were integrated on the Cal Poly Water Tunnel Laboratory. The work emphasizes the application of lasers controlled by a micro-controller to perform microsecond-based pulses and integrating a newly-developed device with an old system consisting of software, cameras, and synchronizers. The …

An Investigation Into The Use Of Amateur Astronomy Equipment For Optical Orbit Determination Using A Mobile Telescope Platform, Johan C. Govaars

Master's Theses

The process of optical orbit determination has long been in the domain of large organizations and stationary observatories with highly specialized scientific equipment. This thesis seeks to determine not only if satellites can be captured regularly using purely commercial-off-the-shelf (COTS) equipment, but also if initial orbit determinations can be made using that data. Moreover, the use of a mobile telescope platform allows users to circumvent the restrictions of fixed observatories such as low horizon viewing restrictions or existing light pollution.

A completely COTS setup was utilized that included an 8-inch Celestron NextStar 8SE telescope with an f/6.3 focal reducer and …

Generating A Novel Legislator Organization Score, Brandon Lin

Master's Theses

Ever since the 2010 Citizens United v. FEC, corporations and organizations have been able to contribute expenditures and resources into political legislators and campaigns. It has become apparent over the years that organizations can excise significant influence in direct ways to influence campaigns across the United States. During this period, Digital Democracy has collected large amounts of data pertaining to legislative bill information, voting patterns, and donations on behalf of the California public to raise awareness. Digital Democracy has also released its own scoring system that compares the amount of aligning votes between a legislator and an organization. However, this …

Aged 539- Internship In Agriculture Education - Waterford High School, Jennifer Pierce

Agricultural Education: Graduate Internship Reports

This report explores the development and implementation of an agricultural education program plan aimed at enhancing student engagement, community involvement, and career readiness. Drawing from established models of program planning and needs assessment, the report focuses on the integration of instructional strategies, supervised agricultural experiences (SAEs) and FFA involvement to foster comprehensive student development. The plan outlines key goals such as increasing student enrollment, improving curriculum alignment with industry standards, and expanding partnerships with local agricultural stakeholders. Strategies include curriculum enhancement, teacher professional development, and the use of data-driven decision-making. The report also emphasizes the importance of evaluation and continuous …

Restoration Of The Cantilever Deck Structure, Calvin P. Vigeant, Roger G. Biddle, Calvin S. Morgan

Architectural Engineering

The Restoration of the Cantilever Deck Structure is an inter-disciplinary project seeking to provide public safety, the continuity of a historic structure, and contribute to the life of the Poly Canyon Experimental Structures Laboratory. This project brought together architectural engineering students Roger Biddle and Calvin Vigeant and construction management student Calvin Morgan for a year long journey of Learn by Doing. The structure is visually stunning and gives the impression of a ship cresting a wave, featuring two prominent steel masts and large tapered wood beams. The deck is perched on a steep hillside site over a seasonal creek that …

Counting Catalan: An Experimental Evaluation Of The Mixing Time For The Triangulation Markov Chain, Roy Gotlieb

Master's Theses

Monte Carlo Markov chains (MCMCs) are used in many areas as a way to model a system’s behavior. By running a probabilistic simulation on a system’s state space, we can estimate properties of the system that could be untenable to directly compute. It is of interest to determine how quickly a Markov chain mixes\textemdash that is, settles into its stationary distribution. One such chain is induced by taking a binary search tree and performing a rotation or flip on one of its edges. We know that this chain eventually settles into the uniform distribution, but the time complexity bounds on …

Low-Cost Vehicle Controller Testing System, Kevin R. Jung

Electrical Engineering

This project aims to create a system to facilitate easier evaluation of PCBs designed for low-voltage vehicle applications with an emphasis on accessibility for student teams in collegiate design series' such as Formula SAE. Student teams or smaller vehicle electronics manufacturers often need to verify designs and validate functionality during both development and manufacturing. An inexpensive, small, and portable, yet capable, system for taking measurements and simulating inputs would allow designers to put their boards into vehicle-representative conditions and environments without needing to connect to actual vehicle hardware. Additionally, while systems exist off-the-shelf that could fulfill the requirements needed by …

Hitch Cart “Landing Gear”, Rebekah White, Jose Raygoza, Randy Hernandez, Brandon Leon

Mechanical Engineering

This report aims to allow our sponsor, to review our design process of the Hitch Cart Landing Gear Prototype. In the design overview section of this report, we discuss the primary design modifications we made to the wheel mechanism of the existing hitch cart prototype, including the addition of the ACME screws and the folding brackets. This allows our sponsor to see the intended improvements made to the past prototype and understand the primary goal of our project. Then, in the implementation section, we cover the entire manufacturing process to allow our sponsor to understand what manufacturing steps must be …

Pseudo Gps For Romi, Emmanuel Baez, Owen Guinane, Gabriel Coria, Conor Schott

Mechanical Engineering

The Pseudo-GPS system for Romi robots addresses the need for precise real-time location tracking in Cal Poly's Mechatronics lab. This project, developed by Emmanuel Baez, Gabriel Coria, Owen Guinane, and Conor Schott, under the guidance of instructor Charlie Refvem, provides a proof-of-concept system to enhance the Romi robots' geolocation capabilities for advanced robotic algorithms.

The proposed system uses a Raspberry Pi 4 equipped with a Pi camera module and ArUco markers to track the position and orientation of Romi robots within a lab environment. Custom 3D-printed stands secure markers on the robots, and a designated origin marker defines the coordinate …

Power At Sea Oscillating Water Column, Nate Hempstead, Max Wong, Ned Eyre Eyre, Luke Wierl

Mechanical Engineering

Current Autonomous Underwater Vehicles (AUVs) are predominantly powered by batteries or other energy sources that require frequent maintenance and human intervention. To increase the deployment times and efficiencies of AUVs, there is a need to develop improved wave energy conversion systems that harness renewable energy from waves and tides for power generation and storage. This approach aims to reduce or eliminate the need for manual maintenance or battery replacements, while also minimizing the environmental impact on marine wildlife and the surrounding ecosystem.

Expandable And Retractable Wheel Design, Ethan Fortenberry, Emily Cottrell, Keegan Martin, Benjamin Mcconnell

Mechanical Engineering

Our sponsor, Jeremy Goren, wants to see his patented expandable wheel design come to life. He requires a functional final product actuated by linear actuators and with a continuous, circular outer shell. The overall design can be broken up into 2 parts: the inner hub and outer shell. The wheel's shell will consist of a 12-piece outer shell that guides the 6 inner shell pieces. The outer shell pieces will be connected via a UBracket. The hub will consist of 3 identical parts that will hold 2 linear actuators each. The pieces will be bolted together to create 1 singular …

Piston Crown Design, Kurt L. Lippmann, Liam T. Janssen, Alex Rangel, Larry J. Davis

Mechanical Engineering

This project investigates the effects of dimpling a piston crown, and its impact on engine combustion dynamics. Through computational methods, the effects of piston crown dimpling on flow characteristics were evaluated. Theoretical results were verified with experimental methods. Experimental methods included characterization of exhaust gas content, engine horsepower and torque, and exhaust opacity.

Swim Fly Drone, Alia Wolken, Sha'anan Levy, Andrew Jwaideh, Eduardo Santos

Mechanical Engineering

This project addresses the need for a versatile drone that is capable of operation in both air and water environments, with potential applications in infrastructure inspection, defense, search and rescue, and ocean exploration. This project focuses on the design and development of a waterproof aerial drone capable of floating on the water surface and submerging underneath to controlled depths with the integration of a custom detachable buoyancy chamber. The buoyancy chamber design utilizes syringes to compress and decompress air inside of the chamber, changing the volume of the chamber, with an actuation system controlled by a closed-loop control system that …

Investigation Of Social Networks Upon Academic Performance And Mental Health, Rachel Izenson

Master's Theses

It has been shown that computing students have a statistically significantly lower overall sense of belongingness compared to other science students. A sense of community is important for many reasons. For example, there are studies that show that a student's sense of belonging correlates with improved academic performance. Our research aims to analyze the sense of belonging among computing students at Cal Poly San Luis Obispo through a network science lens. We surveyed for their sense of belonging, as well as their social network, to understand how friendships impact one's sense of belonging. When student responses were split by gender, …