Digital Commons Network^™

The Nature Of Lobal Qsos. Ii. Hst/Wfc3 Observations Reveal Host Galaxies Dominated By Mergers, Mariana S. Lazarova, Gabriela Canalizo, Mark Lacy, Wyatt Behn, Kaitlyn Raub, Vardha N. Bennert, Duncan Farrah

Physics

Low-ionization broad absorption line QSOs (LoBALs) are suspected to be merging systems in which extreme, active galactic nucleus-driven outflows have been triggered. Whether or not LoBALs are uniquely associated with mergers, however, has yet to be established. To characterize the morphologies of LoBALs, we present the first high-resolution morphological analysis of a volume-limited sample of 22 Sloan Digital Sky Survey (SDSS)-selected LoBALs at 0.5 < z < 0.6 from Hubble Space Telescope Wide Field Camera 3 observations. Host galaxies are resolved in 86% of the systems in F125W, which is sensitive to old stellar populations, while only 18% are detected in F475W, which traces young, unobscured stellar populations. Signs of recent or ongoing tidal interaction are present in 45%–64% of the hosts, including double nuclei, tidal tails, bridges, plumes, shells, and extended debris. Ongoing interaction with a companion is apparent in 27%−41% of the LoBALs, with as much as 1/3 of the sample representing late-stage mergers at projected nuclear separations <10 kpc. Detailed surface brightness modeling indicates that 41% of the hosts are bulge dominated while only 18% are disks. We discuss trends in various properties as a function of merger stage and parametric morphology. Notably, mergers are associated with slower, dustier winds than those seen in undisturbed/unresolved hosts. Our results favor an evolutionary scenario in which quasar-level accretion during various merger stages is associated with the observed outflows in low-z LoBALs. We discuss differences between LoBALs and FeLoBALs and show that selection via the traditional balnicity index would have excluded all but one of the mergers.

Executive Committee - Minutes, 4/25/2023, Academic Senate

Academic Senate Minutes

No abstract provided.

Catching Babies: Helping Students Understand Reproductive Justice Through Black Maternal Health, Jillian A. Tullis

Feminist Pedagogy

No abstract provided.

Combatting Abortion Misinformation And Disinformation In Medical Education, Jaya Prakash, Deborah Bartz

Feminist Pedagogy

Abstract Introduction: Although abortion has historically been federally legal, functional access to abortion care has been thwarted by inflammatory political discourse. Abortion misinformation and disinformation have been deliberately intertwined into political agendas and ideologies, widening the gap between the lay public’s perception of and patients’ lived experience with abortion care. The politicization of abortion care has adverse effects on its provision and training along lines of inequity and marginalization established by preexisting systems of oppression and structural violence. Critical feminist pedagogy—an examination of class, gender, and sexuality on patriarchal misrepresentations of abortion information—can guide medical students to recognize and combat …

Aged 539 - Internship In Agricultural Education, Juliana Sani

Agricultural Education: Graduate Internship Reports

This project report includes documentation required in meeting the quality criteria for secondary-level programs of instruction in agriculture. the documents are concurrently used for the Ag Incentive Grant review process at Minarets High School conducted by staff of the California Department of Education. The supporting documents include information to receive state and local funding and they outline the goals and objectives of the program. This document also provides an overview of operations of the Minarets High School Agriculture Department.

Portable Drinking Water Cooler And Dispenser, Gustavo Hernandez-Lerena, Erik Torres, Caleb Francis Parham, Terry Leung

Mechanical Engineering

This document serves as the comprehensive report for the testing and building for the Portable Water-Cooling System by team AquaCool. Team AquaCool is comprised of four mechanical engineers with a passion to help the agricultural industry in their efforts to keep the health of the workers at their peak. The four engineers who partook in helping the farm workers are as follows: Caleb F. Parham, Erik Torres, Gustavo Hernandez-Lerena, and Terry Leung. To reduce the risk of heatstroke and other unwanted effects from the harsh working conditions during summer, a small and portable system was built to help in the …

Development Of Mirror Flexures For Use In The Muvi Instrument, Colin W. Harrop

Master's Theses

The Miniaturized Ultraviolet Imager (MUVI), is a compact wide field UV imaging instrument in development at UC Berkeley Space Sciences Laboratory and Cal Poly, San Luis Obispo. MUVI is designed to fit in a 2U CubeSat form factor and provide wide field, high resolution images of the ionosphere at far ultraviolet wavelengths. This thesis details the design and analyses of MUVI’s deployable cover mirror mounting flexures. Three different flexure geometries were evaluated, an optimal candidate was determined based on a number of criteria including isolation of vibration and stress to the mirrors, manufacturability and cost. The design of the flexure …

Recognizing Exploitation And Rejecting Analogy: An Analysis Of The Meat-Commodity, Teddy Duncan Jr.

Between the Species

This paper is a two-part project. First, I reject the analogous relationship between the Holocaust and slaughterhouses (found in the anti-meat novel The Lives of Animals) and cross-species analogical thinking entirely; instead, I opt for modes of analysis that can examine the specific circumstances of animals within slaughterhouses. Secondly, I assert that a socio-economic Marxist analysis is the best prism in which to recognize the suffering of pre-slaughter animals and the causation of their suffering (the ostensibly necessary circulation and production of the meat-commodity).

Twitch Trivia Battle Royale: Interactive Entertainment Engineering Game, Noah Tyler Ravetch

Computer Science and Software Engineering

As the world of digital media evolves, so too does the way producers and consumers of entertainment content interact with each other. Live streaming is one such evolution. In this format, one person broadcasts their camera and/or their computer screen to a large audience of viewers in real time. People tuning in can communicate with other viewers and the streamer using the chat feature built-in to the streaming platform.

A new type of entertainment has recently entered the marketplace: interactive entertainment. Concerts are being held virtually in games like Fortnite (Epic Games 2021). TV Shows on Netflix are beginning to …

Hybrid Ac/Dc House, Nicholas Everett Mcadams

Electrical Engineering

The Hybrid AC/DC house is a sustainable alternative to preexisting residential power systems. The implementation of a DC bus in current homes will allow inefficient DC-AC and AC-DC conversions to be circumvented. This provides a direct path for current to flow to DC loads from DC sources such as solar panels to minimize power losses. In doing so, this will give users the ability to power their homes strictly from renewable sources and substantially decrease reliance on the utility. For this purpose, the hybrid AC/DC house is also designed in such a way to be completely grid independent to provide …

Shelfaware: Accelerating Collaborative Awareness With Shelf Crdt, John C. Waidhofer

Master's Theses

Collaboration has become a key feature of modern software, allowing teams to work together effectively in real-time while in different locations. In order for a user to communicate their intention to several distributed peers, computing devices must exchange high-frequency updates with transient metadata like mouse position, text range highlights, and temporary comments. Current peer-to-peer awareness solutions have high time and space complexity due to the ever-expanding logs that each client must maintain in order to ensure robust collaboration in eventually consistent environments. This paper proposes an awareness Conflict-Free Replicated Data Type (CRDT) library that provides the tooling to support an …

Calculating MBh Scaling Relations For Agns Using 2d Galaxy Decomposition Software To Analyse Hst Images, Jewel A. Capili

Physics

This study uses the 2D galaxy decomposition software GALFIT developed by Dr. Chien Peng to analyse Hubble Space Telescope images of 14 Active Galactic Nuclei (AGNs) and obtain their M_BH-spheroid luminosity scaling relations for comparison with previous studies.

Laguna Love: A Sustainable Bikini Collection, Aubrianna L. Davenport

Graphic Communication

Graphic Communication can be applied to various industries of design. As a Cal Poly student I had the opportunity to study abroad in Florence, Italy. During that time I studied fashion and product development, which sparked my desire to become a textile designer one day; I specifically hope to work in the surf apparel industry. Whilst taking textile design classes abroad, I learned that I could apply my love for graphic design to the fashion industry quite seamlessly; I am thankful that Graphic Communication has provided me with the skill sets in Adobe Creative Cloud, especially, when applying my knowledge …

The High Tide Inn Rebrand, Caroline Turnbull

Graphic Communication

For my Senior Project, I found a small Inn in Maine that was just purchased by a new owner. The previous owner of The High Tide Inn was very old and had owned the Inn for a long time, running on word of mouth and the quaint charm of the location. Their website was not a priority and had not been updated in decades. It was not mobile friendly, up to date, or easy to navigate. The logo reflects a charming sign on the property, but does not translate well digitally. In addition to this, there is no vector file …

Savor & Share, Sarah Allison Salisbury

Graphic Communication

As an avid cook, I take pleasure in experimenting with new dishes and exploring diverse flavor combinations. However, I currently lack an organizational system for my recipes, as most of them remain unwritten. Unfortunately, when friends and family ask me to share my recipes, I often confuse them and make it difficult for them to follow the steps correctly with my verbal explanations. To address this issue, I have decided to compile my recipes into a cookbook that will serve as an organized and easy-to-reference collection. This will enable me to easily alter and share my recipes with others. The …

Goodreads App Redesign, Lily Atazai

Graphic Communication

This project will be working on a redesign of the app, GoodReads. This app is used for readers to rate and comment on the books that they are currently reading or have finished. It allows for a community for readers to interact with one another, which essentially acts as a social media. All the users contribute to the rating of each book, which helps others decide if they would like to read it or not. There is also a filter function that allows readers to find new popular books, as well as search for them based on the genres they …

Mechanical Metamaterials, Brent A. Peluso, Oliver T. Parker

Mechanical Engineering

Mechanical metamaterials are an emerging design strategy aimed at tailoring lattice structures to achieve specific properties such as negative Poisson’s ratios and guiding wave propagation. These metamaterials have received increasing attention from various application domains, including medical devices, aerospace, automobile, and infrastructure. The scope of this project is to vary a single lattice parameter and quantify its effect on the structural properties of the given 3D lattice.

Planar Element Alignment System, Benjamin E. Lavigna, Benny F. Cruz, Samuel Gierhan, Jacob Q. Henriksen

Mechanical Engineering

Precise alignment to the micron level is a necessity for microfluidic/micromechanical devices to function as designed. Because of this, a micro-alignment device was commissioned by Professor Hans Mayer on behalf of the Cal Poly Microfluidics Laboratory. Prototype creation was bounded by a set of requirements including, ability to align PDMS & Silicon wafer halves to ± 10 microns, total process speed of three minutes, and total budget of $3000. Some major design hurdles included an ability to verify alignment, possible non-planar alignment pieces, and an inability to contact any point on the face of the alignment pieces after bonding treatment. …

Ghostparty Video Game, Tyler Remlinger Hart

Computer Science and Software Engineering

GhostParty is a Unity game that uses a MongoDB database to store players' gameplay values. These values are used to create "Ghosts" that players can compete with in various mini-games. I found that this form of multiplayer using ghosts can create a good gameplay experience without live multiplayer interactions.

Seven Sisters: A Central Coast Kombucha Company, Emma Jones

Graphic Communication

Seven Sisters is an innovative, fictitious local kombucha brand that serves as a capstone project. This project will use all of the skills learned in the graphic communication department at Cal Poly. The company will be called Seven Sisters (named after the mountain range in San Luis Obispo) and imitate a small local business. By focusing my project on creating a brand, the graphic communication skills used will include: marketing, graphic design, branding, logo and product design, packaging, and social media. Further, kombucha is an intriguing product for to work with because it is a relevant and new market with …

Seaspine Force Limiting Handle With Replaceable Components, Natalie Adamson, Anna Burke, Megan Phillips

Biomedical Engineering

This document outlines details of the Cal Poly-SeaSpine senior project collaboration for the force limiting handle with replaceable components. This document will cover a brief introduction of the project itself, background information about the problem, customer requirements and engineering specifications, ideation and concept selection, detailed design, description of testing and manufacturing plans, design verification and validation results, conclusions, and future work.

The design process included background research and scope identification, ideation, concept selection based on quality functions and customer requirements, detailed design, manufacturing, testing and iteration, and design verification and validation. Key specifications for the device included a force to …

Release, Retraction, And Protection Instrumentation: Designed For Spinal Interbody Fusion Surgeries (P/Tlif, Tfar), Rayana Gutierrez, Pearse Lipscomb, Troy Cristobal

Biomedical Engineering

No abstract provided.

Phone Microwave, Khanh Kim Hoang, Emily Zhou

Computer Engineering

This project involves the installation of remote-control capabilities in an antique 1980s microwave, effectively turning the microwave into a “smart” device. While preserving the original functionality of the microwave, a combination of software and hardware components allows for remote microwave operations. The microwave can be remotely operated by calling the built-in number, and more advanced settings and options can be utilized by texting. The microwave is also secured against unauthorized use with the addition of a PIN code that is required to operate the device.

Planning, Preserving, And Increasing Accessibility: A Reflection On Going “Car-Free”, Abigail J. Weizer

City and Regional Planning

This paper studies the accessibility of car-free areas to those with mobility impairments by examining three car-free and car-lite experiments in California. Whether slowly converted to car-free with long-term, careful planning, or expeditiously changed to car-free during the COVID-19 pandemic, these three car-free experiments show the shortcomings of planning for accessibility in car-free spaces, and how instead of improving accessibility, current planning practice often hinders it. This paper offers a deep-dive into the drawbacks and benefits of going car-free and the ethical and legal reasons why urban planners, designers, and policymakers must consider the accessibility of a space before planning …

Ultrasonic Mapping Needle, Katie R. Stone, Stu Bembenek

Mechanical Engineering

When gaining access to a vein or organ for the purpose of ablation or other reasons, the common procedural method of entry is to use the Seldinger technique. This has been the standard entry procedure since its introduction in 1953, and the technique has not been modified during this time. While effective, it is prone to complication as it relies solely on the operator's precision and experience. It is our task and goal to develop a modifying kit for this procedure that would aid the operator in this process. It would make use of mapping technology and standard products used …

Ivd Delivery System, Brandon Low, Jonathan Li, Margaux Faure, Quentin Yamasaki

Mechanical Engineering

Cepheid is a molecular diagnostics company that has assigned our senior project team to design a system that automates the current manual transportation of samples between two laboratory rooms. With the focus of retaining the sanitary integrity of both the samples as well as the initial cleanroom, also referred to as the packaging laboratory, our team has designed an extension of the current passthrough that will contain all other subsystems. In order to automate the transportation of the samples, the design employs a track and trolley system to be purchased and mounted within the passthrough. A verification prototype was built …

Time-Domain Evaluation Of Atmospheric Ducting Effects On X-Band Propagation Over Water, Jack A. Gallegos

Master's Theses

The marine atmospheric boundary layer (MABL) is the region of atmosphere that interacts with the ocean surface. The atmospheric variability (i.e. temperature and relative humidity) in this region can result in rapid changes in the refractive index with increasing height from the sea surface. The complex region can result in non-standard propagation of electromagnetic (EM) waves beyond the horizon under atmospheric ducting conditions. However, when ducting layers are not present, EM waves are limited to line-of-sight transmission. Atmospheric ducting research is typically conducted using radio frequencies in the X-band (around 8-12 GHz) due to its impact on performance of marine …

Aged 539 Graduate Internship Report - Pacheco High School, Spencer C. Bronken

Agricultural Education: Graduate Internship Reports

This internship and project report includes validation documents required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Pacheco High School, the agriculture program, and the community.

Timber Box Header Using Bamcore Side Panels: A Senior Project Study, Jonathan Frank Herrera

Architectural Engineering

The purpose of this study was to begin development of a composite box header that was able to span long openings with minimal deflection. The headers in study were comprised of BamCore side panels, nailed top and bottom each face to a 2x6 top plate, and a header of multiple specified sizes. The 2x6 top plate and headers ranging from a 6x6 to a 6x12 were made up of Douglas Fir-Larch, No.1. Analysis was performed assuming 10d common nailing at top and bottom of the BamCore side panels. Initial analysis of a composite box header was performed and analyzed as …

Construction Of High-Bay Lab Reaction Frame Foundations, David R. Bowen, Henry E. Miller, Blaize Twisselman

Construction Management

This paper details the construction process of two concrete modular foundations designed to meet specific design standards for various testing methods. The project, positioned within the California Polytechnic State University, San Luis Obispo (Cal Poly) High Bay Lab, will provide the Architectural Engineering (ARCE) and Construction Management (CM) departments with valuable insight into industry structural elements. The project required extensive forethought and thoroughness due to the complex designs, including 200 all-thread coupler attachments and a cumbersome rebar cage. This paper outlines the primary phases of construction, including material procurement and quality control, and discusses how the final product was obtained. …