Digital Commons Network^™

An Analysis And Comparison Of Linear Phase Bandpass Filters, Darrell L. Ash

Theses and Dissertations

The ideal bandpass filter is defined as one which uniformly attenuates and delays all frequency components within the passband and effects zero transmission of all components outside the passband. For reasons which will be subsequently discussed, it is impossible to realize a stable lumped-element filter having this ideal characteristic. This has made it necessary to find ways to physically approximate such a characteristic. Some of the more widely used methods will be compared and analyzed in this paper.

An Experimental Investigation Of Proportional Braking, Rudolf Limpert

Theses and Dissertations

In recent years automobile safety has become more and more important.The braking device contributes largely to the problem of safe driving.

Design And Operation Of Equipment For Impact Test Of A Hydraulic Cushion, Harshadbhai R. Patel

Theses and Dissertations

In recent years, experiments have been carried out to evaluate the performance of water-filled cushion cells used to attenuate energy of automobile collisions. The water-filled cushion cell is a vinyl plastic cylinder of 6 inches nominal outside diameter, 1/4 inch wall thickness, 40 inches length, closed at the bottom by a cast-in-place vinyl plug and partially closed by a bolted-in vinyl diaphragm at the upper end. These cells are designed to be installed in the path of a crashing automobile to absorb and dissipate the kinetic energy of impact. Properly designed cushions could be used as one means of saving …

Development Of A Generalized Structural Dynamics Computer Program, Val E. Simmons

Theses and Dissertations

The purpose of this thesis was the development of a generalized structural-dynamics computer program to calculate the response of multi-degree-of-freedom systems. The user of this computer program, having a limited background in matrix algebra and vibrational analysis, can gain numerical and graphical information concerning the dynamic response of multi-degree-of-freedom structures. The user, with a minimal amount of FORTRAN experience, will find this thesis ideally suited for his needs.

The Thermodynamics (Log K, [Delta]H°, [Delta]S°, [Delta]Cp°) Of Metal Ligand Interaction In Aqueous Solution.|Ni.|P Design And Construction Of An Isothermal Titration Calorimeter.|Nii.|Pthe Interaction Of Cyanide Ion With Bivalent Nickel, Zinc, Cadmium And Mercury.|Niii.|Pthe Interaction Of Glycinate Ion With Bivalent Manganese, Iron, Cobalt, Nickel, Copper, Zinc And Cadmium, Harlin Dee Johnston

Theses and Dissertations

A new isothermal titration calorimeter has been designed to facilitate the study of heats of reaction and heats of solution at constant temperature. With this calorimeter, endothermic or exothermic processes can be studied at temperatures constant to ±0.0002°C. Heat effects are compensated by balancing the heat effect of the process taking place in the calorimeter against a variable heat and a constant cooling Peltier device. The calorimeter was tested by measuring the heat of ionization of water and the heat of dilution of aqueous HClO_4 solutions. For these systems heats were measured to an accuracy of ±0.02 calorie. Log K, …

Nesting Ecology And Behavior Of The Golden Eagle In West Central Utah, Franz J. Camenzind

Theses and Dissertations

The Golden Eagle Aquila chrysaetos canadensis Linn. is facing extinction in much of its range. In the Western Hemisphere its numbers are restricted primarily to the mountainous regions west of the 99th meridian, from extreme northern Alaska to northern Mexico (Hobbie and Cade, 1962) and from timberline in Colorado to below sea level in Death Valley, California (Summer, 1929a).

Symbols And Salvation, Chauncey C. Riddle

BYU Studies

No abstract provided.

Reminiscenses And Reflections, Alphonse A. Kubly, Dr. Leo Schelbert, L. B.

Swiss American Historical Society Newsletter

Before the advent of Mr. Collier, Everglades had been a sport-fisherman's outpost. There was an inn, the Rod & Gun Club, catering to yacht-borne fishing enthusiasts, and three or four small bungalows harbored families who made their modest living as guides. Now Everglades was going to be reshaped in a manner to do honor to its role as Country seat. There were many reminders of Mrs. Collier's favorite field of action: New York City. Approaching by boat, a street sign with the incongruous legend "Riverside Drive" had come into view. There also was the unavoidable Broadway. Along the boat pier …

Letter, Dr. Lukas Burckhardt

Swiss American Historical Society Newsletter

To the Members and Friends of the SAHS ,

1 ) This issue of our Newsletter is entirely dedicated to the autobiography of one of our members , the civil-engineer Alphonse Kubly from Netstal in the canton of Glarus whose home is now in New York. It is a fascinating document, full of thoughtful observations on his youth in a typical Glarner milieu, where he grew up under the high moral standards of a family prominent in the tratidional textile industry, on his adolescence in the chaotic period of the twenties in Switzerland and in Germany, and on his new …

Full Issue

Swiss American Historical Society Newsletter

No abstract provided.

Investigation Of Implicit Methods For Solution Of The Fourier Equation, Kjell Steinar Gundersen

Theses and Dissertations

In recent years there has been an extensive development of finite difference techniques for solution of the transient heat conduction equation due to the availability of high-speed digital computers. It is the purpose of this paper to investigate and compare several implicit methods for the solution of the Fourier equation with regards to truncation error, round-off error and computer time which probably are among the most important factors to be considered in choosing a method.

An Experimental Study Of The Effects Of Welding On Cold-Worked And On Heat-Treated Steels As They Correlate To Tempering And Jominy Data, Kiran Patwari

Theses and Dissertations

Since Bernandos of Russia in 1887 applied an electric arc to weld metals, welding has become an important method of fabrication in industry. The ever increasing use of welding on a still widening variety of materials demands m ore and m ore understanding of the basic mechanisms of welding.

Transition From Laminar To Turbulent Flow For Dilute Guar Gum Solutions, Martin L. Palmer

Theses and Dissertations

Solutions of many natural and synthetic polymers have been found to reduce turbulent friction losses in flow through pipes. The basic mechanism causing these reductions is not entirely understood although two general theories have been advanced.

Design Of An Automatically Controlled-Feed, Constant Current Arc Generating Machine For Consumable Electrodes, Dhansukh J. Chauhan

Theses and Dissertations

Good welding research requires accurate control of the variables involved,to achieve consistent results. The variables involved in arc welding are of the dependent and independent type. Control of the independent variables such as arc current, arc voltage and welding velocity is necessary to control the independent variables such as penetration, electrode consumption rate, etc. The purpose of this thesis was to design, develop and test an automatic welding machine which controlled the above variables within the limits required for welding research.

Design Of An Apparatus For Study Of Stress Versus Strain As A Function Of Strain Rate In Plastics, Ashok B. Choksi

Theses and Dissertations

As new materials are developed, it is essential to study their mechanical properties experimentally. It is easy to find properties like ultimate strength, yield strength, hardness, etc., using standard techniques. It is not possible to observe the tensile behavior of materials at high strain rates using standard equipment. Plastics are often subjected to tensile loads at various rates of loading, such as when they are used to absorb impact.

Study Of Tensile Stress Versus Strain Characteristics Of Vinyl Plastic At Various Temperatures As A Function Of Strain Rate, Jitendra T. Parikh

Theses and Dissertations

The purpose of this thesis was to study the tensile-stress versus strain characteristics of vinyl plastic at various temperatures as a function of strain rate.

A Similarity Model For Flow In A Turbulent Boundary Layer, Earl Clark Lemmon

Theses and Dissertations

One of the basic goals in engineering is to generate models which will provide a means for analytically predicting observed phenomenon. Such a model is often modified several times to obtain better results. The purpose of this study was to generate a model for an equilibrium turbulent boundary layer for steady flow over a flat plate and compare the results obtained by using the model with experimental data. Part of the objective was to also suggest ways in which the model could be modified to obtain better results.

Developing Turbulent Flow In An Annulus, Dwight H. Kelly

Theses and Dissertations

Turbulent flows are encountered in nearly every case where fluid motion is involved. Since turbulent flow through relatively short annular sections occurs frequently in practical applications, e.g., flow through heat exchangers, axial flow turbomachinery and jet aircraft engines, there is a need for detailed information on this subject.

The Enrichment Of Hydro-Carbon Fuel By Aluminum Powder In An Open-Hearth Furnace, Rick Sung-Tao Lee

Theses and Dissertations

The objective of this thesis was to study theoretically the enrichment of hydrocarbon fuels with aluminum powder for an open-hearth furnace.

Electric Arc Welding Of Gray Cast Iron Without Preheating, Ramon Prestwich

Theses and Dissertations

Cast irons are iron-carbon alloys with greater than 1.7% carbon. Although white, malleable and ductile cast irons are used extensively for casting work, this study is concerned with only the gray cast irons.

The Godbeite Movement: A Dissent Against Temporal Control, Grant H. Palmer

Theses and Dissertations

The approach of the transcontinental railroad in 1869 posed several real and imagined threats to the Mormon Kingdom in the Great Basin. The Pacific Railroad ended Mormon geographic isolation and brought economic competition from the States. The railroad also made it possible for miners to get to the gold fields faster and with the heave equipment necessary to make Utah mining profitable. Sensing the political problems and the social and moral evils that would accompany the railroad, the Mormon leaders, in hopes of meeting these problems, counseled to extend their economic goal of self-sufficiency. Through stepped-up cooperation and unity they …

A Study Of The Lds Coordinator Program, Carl J. Olsen Jr.

Theses and Dissertations

The purpose of this thesis was to study the effectiveness of the coordinator in the LDS Seminary in carrying out his responsibilities. Special emphasis was placed upon the coordinator's influence over the teachers placed under his jurisdiction.

An Historical Study Of Adult Education Programs Of The Brigham Young University From 1921 To 1966, Keith Lowell Smith

Theses and Dissertations

The purpose of the study is to record the history of Adult Education programs of the Brigham Young University. Such a history has not been written although two master's theses and one doctor's thesis have treated some phases of the study. George S. Haslam, Chairman of the B.Y.U. Ogden Center for Continuing Education, explored in his master's thesis the History of the Policy Making Groups of the Brigham Young University particularly as they have reference to adult education. A thesis on the establishment of the Audio Visual Department of B.Y.U. was completed in 1959 by Paul S. Smith and Dr. …

A Study Of Frictional Drag Force Reduction On A Flat Plate By The Injection Of A Dilute Solution Of Guar Gum Into The Boundary Layer, Neil Henry Clay

Theses and Dissertations

The study of frictional drag force reduction has been the subject of much research for many years. One of the significant developments in the field of frictional drag force reduction has been the discovery of the effectiveness of dilute polymer solutions in reducing drag. By using dilute high-polymer solutions frictional drag forces in pipe flow have been reduced by as much as 70 per cent.

A Study Of Thermal Responses Of A Body Of Complex Geometry To A Moving Heat Source, J. Norman Smith

Theses and Dissertations

The effect of the fusion welding process upon the metals being welded is a matter of great interest and has been the subject of much investigation, both theoretical and experimental. The properties of metals are determined by the structure of their crystals (within limits for any given metal), and the crystalline structure is determined by heating and cooling rates. Thus the knowledge of temperatures, and heating and cooling rates, becomes the key to understanding these effects of heating. Since the greatest part of fusion welding is done using a gas torch or an electric arc, the necessary theoretical study is …

Model Study And Analysis Of The Flow Elements Of A Recirculation Mixing System, Albert Warren Berg

Theses and Dissertations

The term water clarifier as used in this text refers to a versatile water treatment unit which combines flocculation and coagulation, clarification and positive sludge removal in a single tank. Water clarifiers are very compact units which are being used in municipal and industrial water treatment for the removal of turbidity, algae, color, iron and silica; lime or lime-soda softening; magnesium precipitation; brine clarification; and waste water clarification with or without chemicals. Water clarifier units have found wide use in the sanitary field, providing high removals in the pre-treatment of sewage and in secondary sewage treatment through addition of coagulants.

Bibliography Of Utah Botany And Wildland Conservation, Earl M. Christensen

Brigham Young University Science Bulletin, Biological Series

No abstract provided.

The Design Of A One-Man Terramechanism, Brent Charles Fryer

Theses and Dissertations

With the rebirth of special warfare in the last few years, the role of the individual soldier and of squad-sized units has been re-emphasized. Most guerilla-type fighting has been, is presently, and will most likely continue occurring in remote areas of the world. The terrain encountered may be tropical grasslands and canopy areas, or rugged mountains, inland waterways, swamps, mud flats and rice paddies. Other adverse terrain conditions are frequently encountered and must be crossed to accomplish the mission of the unit.

Correlation Of Weldment Hardness Profiles In Steels With Jominy End-Quench Data, Deepak Panjabi

Theses and Dissertations

Welding occupies an important place as a major metal fabricating process and steel is the backbone of many an industry. Therefore it is of paramount importance to know the effect of welding on steel.

The Development Of Turbulent Flow In The Inlet Region Of Smooth Pipe, Forrest C. Smith

Theses and Dissertations

Turbulent flows are encountered in nearly every case where fluid motion is involved. Turbulent flow in pipes is of great practical interest, and the problem of flow in the entry region is of special importance since the great majority of applications are in the realm of developing flow.