Digital Commons Network^™

Optical Design Study Of A High-Resolution Spectrograph Utilizing Photonic Lanterns For A Large Fiber Array Telescope, Richard D'Alo

Graduate Thesis and Dissertation 2023-2024

Large area fiber array telescopes are a relatively modern development in the long history of telescope design and effectively create a single large equivalent aperture by combining many smaller unit telescopes at a fraction of the cost. In this study a spectrograph optical design is demonstrated that utilizes photonic lanterns in the input fiber feed for the Large Fiber Array Spectroscopic Telescope (LFAST) design concept, where photonic lanterns provide a simplified approach to the fiber feed originally proposed for LFAST. Conservation of etendue is applied to derive the relationship between slit size and photonic lantern ratio, and classical echelle spectrograph …

Another Angle On Perspective, John Adam

Mathematics & Statistics Faculty Publications

No abstract provided.

"Density" Of Light And Pi, John Adam

Mathematics & Statistics Faculty Publications

Question 1: What is the linear “density” of the spectral range on the ceiling? The crown molding is common for an older (circa 1925) house.

Question 2: The glass shown is a standard 16-oz. water glass engraved with many digits of pi. (The dimensions appear somewhat distorted because of the camera angle chosen to enhance the contrast of the numerals against the dark background.)

A Theoretical Study Of Elementary Processes In Interstellar Plasma, Joshua Forer

Graduate Thesis and Dissertation 2023-2024

Interstellar plasma — interstellar clouds in particular — play an important role in determining the structure and evolution of galaxies. Understanding the time evolution of such plasmas requires knowledge of the chemical processes that drive their dynamics. Two processes are studied in this dissertation: radiative electron attachment (REA) via dipole-bound states (DBSs) and dissociative recombination (DR). Of the several hundred molecules detected in the interstellar medium, only eight anions have been detected: CN-, C3N-, C5N-, C7N-, C4H-, C6H-, C8H-, and C10H-. Their production mechanism is not well known; REA was suggested as a possible formation pathway, but previous theoretical studies …

Piv Measurements Of Open-Channel Turbulent Flow Under Unconstrained Conditions, James K. Arthur

Faculty Journal Articles

Many open-channel turbulent flow studies have been focused on highly constrained conditions. Thus, it is rather conventional to note such flows as being fully developed, fully turbulent, and unaffected by sidewalls and free surface disturbances. However, many real-life flow phenomena in natural water bodies and artificially installed drain channels are not as ideal. This work is aimed at studying some of these unconstrained conditions. This is achieved by using particle image velocimetry measurements of a developing turbulent open-channel flow over a smooth wall. The tested flow effects are low values of the Reynolds number based on the momentum thickness Re …

Reflective Freewriting As A Strategy To Improve Pre-Service Teacher’S Physics Content Knowledge And Overall Attitude Toward Physics And Physics Teaching, Kali Ann Shoaf-Laughlin

Graduate Theses/Dissertations

A pilot study conducted in the pre-service teacher (PST) physics classroom at Missouri State University sought to validate a tool for learning. A writing treatment, in which students were asked to participate in reflective freewriting exercises over the course of the semester was administered to one lab group. The Physics Attitude Scale was used to determine whether a positive impact was made on pre-service teacher attitudes about physics and teaching physics. Classroom exams and lab reports were used to determine whether or not aptitude was affected. This action research study used qualitative data to assess content knowledge and overall shift …

Machine Learning Strategies For Potential Development In High-Entropy Driven Nickel-Based Superalloys, Marium Mostafiz Mou

Graduate Theses/Dissertations

In this study, I developed Deep Learning interatomic potentials to model a multi-phase and multi-component system of Ni-based Superalloys. The system has up to three major phase constituents, namely Gamma, Gamma Prime, and Transition-metal rich Carbide. I utilized invariant scalar-based and/or equivariant, tensor-based neural network (NN) approach as implemented in DEEPMD, NEQUIP/ALLEGRO codes, respectively, and Moment Tensor Potential (MTP). For the training and validation sets, I employed the ab-initio molecular dynamics (AIMD) trajectory results and ground state DFT calculations, including the energy, force, and virial database from highly diverse compositions, temperatures, and pressures following a “High Entropy Strategy.” The Deep …

Growth And Characterization Of Sm3hfbi5, Patrick Lambdin

Graduate Theses/Dissertations

First found experimentally in 2015, topological Weyl materials are desirable compounds that have garnered much interest due to their ability to conduct electricity via their surface states even though the bulk material is a semimetal. Such a candidate, Sm3HfBi5, was discovered with a flux crystal growth method, following an extensive amount of reaction syntheses. This thesis reports on the discovery, growth, structural characterization via x-ray diffraction, and magnetization measurements on Sm3HfBi5.

Investigating The Structural Properties Of Licoo2 Through Annealing In A Reducing Atmosphere And Characterization Using Raman Spectroscopy And X-Ray Diffraction, Mathew A. Boeser

Graduate Theses/Dissertations

The electrochemical performance of lithium cobalt oxide (LiCoO₂) cathode materials in lithium-ion batteries is strongly influenced by their structural and chemical characteristics. Annealing in a reducing atmosphere is able to modify the crystal structure of LiCoO₂ by inducing oxygen vacancies, ideally enhancing its electrochemical performance. This master's thesis presents an investigation into the effects of low to mid-range annealing temperatures in a reducing atmosphere on bulk LiCoO₂ powder, utilizing Raman spectroscopy and X-ray Diffraction (XRD).

Development Of Advanced Germanium Detectors For Rare Event Physics, Sanjay Bhattarai

Dissertations and Theses

High Purity Germanium (HPGe) detectors are widely used in rare-event physics searches for dark matter, neutrinoless double-beta decay, and solar neutrinos. This dissertation fo- cuses on improving crystal quality by controlling the impurity concentration, dislocation density, and growth environment as well as developing advanced Ge detectors for various physics applications. The dissertation presents experimental investigations of electrical conduction mechanisms in p-type amorphous germanium (a-Ge), which is used as an elec- trical contact material in HPGe detectors. By measuring the surface leakage current from three high-purity planar Ge detectors, we determine the localization length and hopping parameters in a-Ge. The dissertation …

Development Of Novel Hpge Detector For Rare Event Physics, Mathbar Singh Raut

Dissertations and Theses

This dissertation focuses on the enhancement of crystal quality in High Purity Germanium (HPGe) detectors, which play a crucial role in rare-event physics investigations such as dark matter detection, neutrinoless double-beta decay, geo-neutrinos, and solar neutrinos. The primary objective of this research is to improve crystal quality by controlling impurity concentration, dislocation density, and growth environment. Additionally, the development of advanced Ge detectors for various physics applications is explored. One significant aspect examined in this dissertation is the investigation of systematic errors associated with the Hall effect system. The goal is to identify a reliable technique that minimizes the systematic …

Background Discrimination Of A Neutrino Detector With Dense Neural Networks, Perry Siehien

Dissertations and Theses

Neutrinos are subatomic particles that weakly interact with matter due to their neutral charge and small cross section. Detectors that search for neutrinos require sensitive instrumentation, which makes them susceptible to various background sources such as gamma rays. Additionally, coherent elastic neutrino-nucleus scattering events, or CEvNS, are the weakest neutrino interactions at 1-25 keV, making them exceptionally difficult to observe. To understand the physics of CEvNS events within the detector material, the recoil signatures of relevant interactions must be determined. Traditional analysis methods are effective, but cannot be applied to energies below 50 keV, due to the overlap of discrimination …

Design And Fabrication Of Volume Holographic Optical Couplers For A Range Of Non-Normal Incidence Angles, Dipanjan Chakraborty, Rosen Georgiev, Sinead Aspell, Izabela Naydenova, Suzanne Martin

Conference Papers

A theoretical model has previously been developed to calculate the holographic recording beam angles required in air (at any recording wavelength) to produce a Volume Holographic Optical Element (VHOE) for operation as a coupler for different input and output angles. In this paper, the experimental study is extended to further validate the VHOE coupler design and fabrication approach for additional incident beam angles, comparing -40° -45° and -50° (in air). The output angle for each VHOE is +45° within the medium and the coupler operational wavelength is 633nm. Holographic recording in Bayfol HX 200 photopolymer at 532nm is used to …

Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova

Conference Papers

As the risk of antibiotic resistant pathogens increases, development of convenient point of care devices is essential. Such devices would help avoid infection – ensure cleanliness of environments and assist in bacteria analysis. The ultimate aim of the research presented here is to develop a compact, cost effective, easy to use optical device which is capable of detecting and quantifying bacteria in an aqueous sample. The surface relief patterns have a dual role, they provide a diffracted light signal, and control the adhesion of the bacteria to the surface. The strength of the diffracted signal is expected to provide a …

Azimuthal Anisotropy Measurement Of (Multi)Strange Hadrons In Au+Au Collisions At √S Nn = 54.4 Gev, Star Collaboration

Physics and Astronomy Faculty Publications

Azimuthal anisotropy of produced particles is one of the most important observables used to access the collective properties of the expanding medium created in relativistic heavy-ion collisions. In this paper, we present second (v2) and third (v3) order azimuthal anisotropies of KS0, φ, Λ, Ξ, and ω at midrapidity (|y|< 1) in Au+Au collisions at sNN=54.4 GeV measured by the STAR detector. The v2 and v3 are measured as a function of transverse momentum and centrality. Their energy dependence is also studied. v3 is found to be more sensitive to the change in the center-of-mass energy than v2. Scaling by constituent quark number is found to hold for v2 within 10%. This observation could be evidence for the development of partonic collectivity in 54.4 GeV Au+Au collisions. Differences in v2 and v3 between baryons and antibaryons are presented, and ratios of v3/v23/2 are studied and motivated by hydrodynamical calculations. The ratio of v2 of φ mesons to that of antiprotons [v2(φ)/v2(p¯)] shows centrality dependence at low transverse momentum, presumably resulting from the larger effects from hadronic interactions on antiproton v2.

Gauging The Mass Of Metals In The Gas Phase Of Galaxies From The Local Universe To The Epoch Of Reionization, K. E. Heintz, Alice E. Shapley, Ryan L. Sanders, M. Killi, D. Watson, G. Magdis, F. Valentino, M. Ginolfi, D. Narayanan, T. R. Greve, J. P. U. Fynbo, D. Vizgan, S. N. Wilson

Physics and Astronomy Faculty Publications

The chemical enrichment of dust and metals are vital processes in constraining the star formation history of the universe. These are important ingredients in the formation and evolution of galaxies overall. Previously, the dust masses of high-redshift star-forming galaxies have been determined through their far-infrared continuum, however, equivalent, and potentially simpler, approaches to determining the metal masses have yet to be explored at z ≳ 2. Here, we present a new method of inferring the metal mass in the interstellar medium (ISM) of galaxies out to z 8, using the far-infrared [C II]- 158† μm emission line as a proxy. …

Jwst/Nirspec Balmer-Line Measurements Of Star Formation And Dust Attenuation At Z ∼ 3–6, Alice E. Shapley, Ryan L. Sanders, Naveen Reddy, Michael W. Topping, Gabriel B. Brammer

Physics and Astronomy Faculty Publications

We present an analysis of the star formation rates (SFRs) and dust attenuation properties of star-forming galaxies at 2.7 ≤ z < 6.5 drawn from the Cosmic Evolution Early Release Science Survey. Our analysis is based on JWST/NIRSpec Micro-Shutter Assembly R ∼ 1000 spectroscopic observations covering approximately 1-5 μm. Our primary rest-frame optical spectroscopic measurements are Hα/Hβ Balmer decrements, which we use as an indicator of nebular dust attenuation. In turn, we use Balmer decrements to obtain dust-corrected Hα-based SFRs (i.e., SFR(Hα)). We construct the relationship between SFR(Hα) and stellar mass (M _*) in three bins of redshift (2.7 ≤ z < 4.0, 4.0 ≤ z < 5.0, and 5.0 ≤ z < 6.5), which represents the first time the star-forming main sequence has been traced at these redshifts using direct spectroscopic measurements of Balmer emission as a proxy for SFR. In tracing the relationship between SFR(Hα) and M _* back to such early times (z > 3), it is essential to use a conversion factor between Hα and SFR that accounts for the subsolar metallicity prevalent among distant galaxies. We also use measured Balmer decrements to investigate the relationship between dust attenuation and stellar mass out to z ∼ 6. The lack of significant redshift evolution in attenuation at fixed stellar mass, previously confirmed using Balmer decrements out …

Azimuthal Anisotropy Measurement Of (Multi)Strange Hadrons In Au+Au Collisions At √𝑠𝑁⁢𝑁=54.4 Gev, Star Collaboration

Physics and Astronomy Faculty Publications

Azimuthal anisotropy of produced particles is one of the most important observables used to access the collective properties of the expanding medium created in relativistic heavy-ion collisions. In this paper, we present second (v2) and third (v3) order azimuthal anisotropies of KS0, φ, Λ, Ξ, and ω at midrapidity (|y|< 1) in Au+Au collisions at sNN=54.4 GeV measured by the STAR detector. The v2 and v3 are measured as a function of transverse momentum and centrality. Their energy dependence is also studied. v3 is found to be more sensitive to the change in the center-of-mass energy than v2. Scaling by constituent quark number is found to hold for v2 within 10%. This observation could be evidence for the development of partonic collectivity in 54.4 GeV Au+Au collisions. Differences in v2 and v3 between baryons and antibaryons are presented, and ratios of v3/v23/2 are studied and motivated by hydrodynamical calculations. The ratio of v2 of φ mesons to that of antiprotons [v2(φ)/v2(p¯)] shows centrality dependence at low transverse momentum, presumably resulting from the larger effects from hadronic interactions on antiproton v2.

Beam Energy Dependence Of Fifth- And Sixth-Order Net-Proton Number Fluctuations In Au + Au Collisions At Rhic, Star Collaboration

Physics and Astronomy Faculty Publications

We report the beam energy and collision centrality dependence of fifth and sixth order cumulants (C5, C6) and factorial cumulants (κ5, κ6) of net-proton and proton number distributions, from center-of-mass energy (sNN) 3 GeV to 200 GeV Au+Au collisions at RHIC. Cumulant ratios of net-proton (taken as proxy for net-baryon) distributions generally follow the hierarchy expected from QCD thermodynamics, except for the case of collisions at 3 GeV. The measured values of C6/C2 for 0%-40% centrality collisions show progressively negative trend with decreasing energy, while it is positive for the lowest energy studied. These observed negative signs are consistent with …

Measurement Of Sequential ϒ Suppression In Au + Au Collisions At √Snn = 200 Gev With The Star Experiment, Star Collaboration

Physics and Astronomy Faculty Publications

We report on measurements of sequential ϒ suppression in Au+Au collisions at sNN=200 GeV with the STAR detector at the Relativistic Heavy Ion Collider (RHIC) through both the dielectron and dimuon decay channels. In the 0%-60% centrality class, the nuclear modification factors (RAA), which quantify the level of yield suppression in heavy-ion collisions compared to p+p collisions, for ϒ(1S) and ϒ(2S) are 0.40±0.03(stat)±0.03(sys)±0.09(norm) and 0.26±0.08(stat)±0.02(sys)±0.06(norm), respectively, while the upper limit of the ϒ(3S) RAA is 0.17 at a 95% confidence level. This provides experimental evidence that the ϒ(3S) is significantly more suppressed than the ϒ(1S) at RHIC. The level of …

Measurementus Magnetic Moment To 0.20 Ppm Of The Positive Muon Anomalo, The Muon G − 2 Collaboration

Physics and Astronomy Faculty Publications

We present a new measurement of the positive muon magnetic anomaly, aμ(gμ-2)/2, from the Fermilab Muon g-2 Experiment using data collected in 2019 and 2020. We have analyzed more than 4 times the number of positrons from muon decay than in our previous result from 2018 data. The systematic error is reduced by more than a factor of 2 due to better running conditions, a more stable beam, and improved knowledge of the magnetic field weighted by the muon distribution, p′, and of the anomalous precession frequency corrected for beam dynamics effects, ωa. From the ratio ωa/p′, together with precisely …

Ai-Assisted Optimization Of The Ecce Tracking System At The Electron Ion Collider, C. Fanelli, Z. Papandreou, K. Suresh

Physics and Astronomy Faculty Publications

The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the ‘‘glue’’ that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5 T solenoid. The EIC detector proposal review concluded …

Scientific Computing Plan For The Ecce Detector At The Electron Ion Collider, J. C. Bernauer, C. T. Dean, C. Fanelli, J. Huang, K. Kauder, D. Lawrence, J. D. Osborn

Physics and Astronomy Faculty Publications

The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required …

Design, Construction, And Stabilization Of An Adjustable Repetition Rate Frequency Comb For Precision Spectroscopy, Matthew Carter

Physics, Astronomy and Geophysics Honors Papers

Optical frequency combs have numerous applications across the sciences. One of the most powerful applications is in molecular spectroscopy, which takes advantage of both the coherence of lasers and combs’ inherent broad bandwidth. One well-established design is the erbium fiber comb, which is popular due to its low cost and relative ease of construction. I have modified the traditional all-fiber design by introducing an adjustable free-space section which allows for adjustments to the path length, and thus the comb’s repetition rate. This low-cost addition allows for repetition rate matching, a necessity for dual-comb spectroscopy, and active repetition rate stabilization, which …

Quantum Computing And Its Applications In Healthcare, Vu Giang

OUR Journal: ODU Undergraduate Research Journal

This paper serves as a review of the state of quantum computing and its application in healthcare. The various avenues for how quantum computing can be applied to healthcare is discussed here along with the conversation about the limitations of the technology. With more and more efforts put into the development of these computers, its future is promising with the endeavors of furthering healthcare and various other industries.

Direct Parameter Fitting Of Action Potentials In Skeletal Muscle Cells Which Include Longitudinal Segments, Tyme Suda

Browse all Theses and Dissertations

Excitation of skeletal muscle cells triggers a large voltage spike known as an action potential (AP), leading to muscle contraction. Modeling of an AP is typically done using the method developed by scientists Hodgkin and Huxley (HH). In the HH method, voltage and time gated Na+ and K+ ionic currents are simulated, along with a positive “Leak” ionic current and capacitive current. Due to the complexity and the computational time required for simulation, direct fitting of HH parameters to experimental APs has rarely been attempted. A previous thesis at Wright State performed direct fitting for the case of a single …

A First Study Of The Effect Of Surface Roughness In Additive-Manufactured Copper At Thz Frequencies, Tomas Di Fulvio, Elliott R. Brown, Andrew J. Huebner, Michael A. Saville, Paul Sotirelis

Physics Faculty Publications

The surface roughness of additive-manufactured copper is characterized by profilometry, and its effect on the THz reflectance is measured at 600 GHz. A strong specular component is measured, as well as a non-specular component displaying fluctuations in the wings of the angular reflectance plot.

Hovering Potato ~ Activity Plan, Admin Stem For Success

STEM for Success Showcase

This experiment is a great example of chemistry. This experiment relies heavily on density and diffusion.

• Water is less dense than half of a potato. Therefore, the potato sinks.

• Sugar water is more dense than half of a potato. Therefore, the potato floats.

By slowly adding water to sugar water, two layers are formed which allows the potato to hover in between. Slowly adding the water allows for diffusion to occur at a minimum.

Simulation Of Coherent Remission In Planar Disordered Medium, Pablo Jara-Palacios, Ho Chun Lin, Chia Wei Hsu, Hui Cao, Alexey Yamilov

Physics Faculty Research & Creative Works

Waves remitted from a scattering medium carry information that can be used for non-invasive imaging and sensing. Such techniques are usually limited by a low photon budget. Recent progress in optical wavefront shaping has enabled coherent control with an order-of-magnitude enhancement of remission [1]. This experimental study necessitated increasingly demanding numerical simulations. Extending this line of research requires more sophisticated computational techniques capable of simulating multiple instances of even larger systems. Here, we demonstrate that remission geometry can be efficiently simulated using a novel open-source software package [2] Maxwell's Equations Solver with Thousands of Inputs (MESTI). To verify its numerical …

Microstructural Characterizations And Strength Development Of Self-Compacting Concrete Using Rice Husk Ash, Floyd Rey P. Plando, Joel T. Maquiling

Physics Faculty Publications

The conversion of waste and by-products into green building materials is gaining attention for a sustainable economy. Particularly, rice husk ash (RHA) is used as a precursor in self-compacting concrete due to its high pozzolanic activity. It also minimizes the use of conventional OPC as a primary binder during construction by exploiting its chemical features and characteristics as an alternative binding agent. Developing and mass-producing RHA as a cementitious material would lessen the carbon footprint that harms the environment. This study presents the compressive strength and microstructural characterizations of rice husk ash-based self-compacting concrete (RHA-SCC). The scanning electron microscope was …