Digital Commons Network^™

The Geology And Ore Deposits Of The Ruby Gulch Mine, Henry J. Roletto, John X. Combo

Bachelors Theses and Reports, 1928 - 1970

The Ruby Gulch Mine, owned and operated by the Ruby Gulch Mining Company, Zortman, Montana, is one of the most important low-grade gold producers in the state. Sit­uated in the Little Rocky Mountains, the mine has had an interesting history since its discovery shortly before the turn of the century.

An Investigation Of A Particular Weldment Failure, Byron Clow

Bachelors Theses and Reports, 1928 - 1970

Two sets of weld-test coupons, supposedly made under identical conditions, were submitted to this institution last year for approval and certification under the A.S.M.E. Welder's Qualification Code. The first set of coupons was unsatisfactory. The second set, made by the same operators one month later, was satisfactory.

Corrosion Testing Of Iron-Tin Alloys By The Salt Spray Method, Bernard T. Mcdonald

Bachelors Theses and Reports, 1928 - 1970

The purpose of this study was to determine the rela­tive rate of corrosion of iron-tin alloys containing low percentages of tin. Since in the world today, a great deal of work is being done to develop large tin deposits and new methods devised to treat these ores, it is possible that the metal will become abundant and will obtain a more important position in the metal industry.

The Corrosion Resistance Of Iron-Tin Compacts As Produced By Powder Metallurgy, Robert W. Gambill

Bachelors Theses and Reports, 1928 - 1970

The art of Powder Metallurgy deals with the preparation of metal powders and their utilization. As a more pertinent definition, the following has been suggest­ed: "Powder Metallurgy is the art of producing metal powders and shaped objects from individual, mixed, or alloyed metal powders, with or without the inclusion of non-metallic consti­tuents".

Geology And Mineral Deposits Of Idaho: A Summary, Paul B. Bronken

Bachelors Theses and Reports, 1928 - 1970

The great diversity on mineral wealth in Idaho establishes it as one of the principle mining states in the union. Mining first began in the state with the discovery of placer gold in the Pierce City district in 1861, and since that date has become one of the leading industries of the state.

Upper Cretaceous Sediment In Montana, Frank J. Frankovich

Bachelors Theses and Reports, 1928 - 1970

Cretaceous sediments in Montana record events during a period of unusual geologic interest. After a long period of extensive submergence of the area during Jurassic time, came a period of varying continental and marine deposition with consequent variations in the types of sediments laid down. A study of these variations, their extent, and their cause has been the primary object of this thesis.

The Problem Of The Tensleep Sandstone, George D. Mccarthy

Bachelors Theses and Reports, 1928 - 1970

Sandstone is probably one of the most important groups of rocks in existence today. The economic importance of so insignifi­cant a thing as a mass of sand grains grows with the true reality of the situation. By increasing our knowledge of grains of sand, or particles of sandstone in all their ram­ifications, it would undoubtedly reflect upon our everyday life by increasing commercial possibilities of an undevel­oped natural resource of Montana.

Isopach Maps And Discussion Of The Ordovician And Devonian Of Montana And Adjacent Areas, Arden F. Blair

Bachelors Theses and Reports, 1928 - 1970

The intensive postwar search for new petroleum horizons has resulted in widespread prospecting in the northern Great Plains. No commercial production has as yet been derived from Ordovician or Devonian rocks in Montana, but the relat­ively few tests that have penetrated to critical depths have disclosed encouraging conditions which merit further consider­ation, especially in Devonian strata.

Occurrence Of Native Copper Near Jefferson City, Montana, Terence G. Kirkland

Bachelors Theses and Reports, 1928 - 1970

Sometime prior to 1870, a group of prospectors made what was believed to be a "rich strike' on one of the tributaries of Prickly Pear Creek in Jefferson County, Montana. Instead of striking it rich, they had uncovered a native copper deposit, worthless to them because of its limited extent and remote location, but now of much interest to the geologist, and to the mining engineer because of its possible commercial value.

Electro-Deposition Of Iron From A Chloride Bath, Charles W. Noon

Bachelors Theses and Reports, 1928 - 1970

Iron was electro-deposited from a ferrous chloride bath. Studies were made of deposits formed when current density was varied, and fin­ally when both current density and temperature were changed. An attempt was made to lay the ground work for a long range study of the chloride bath, and to determine the most simple conditions possible for obtaining a smooth, even, and thick deposit.

General Geology And Mines Of Northwestern Montana, Robert L. Sandvig

Bachelors Theses and Reports, 1928 - 1970

The five counties discussed in this paper compose the northernmost and westernmost counties in Montana. On the eastern boundary are Glacier National Park and the Continental Divide; on the southern boundary are Missoula and Powell counties; Idaho lies on the southwestern and western side; and the Canadian border lies along the northern edge. The region is on the Pacific Ocean side of the Rocky Mountains. Three major rivers, the Clark Fork, the Flathead, and the Kootenai drain this area into the Columbia River.

The Anodic Polishing Of Copper In Solutions Of Orthophosphoric Acid, Robert E. Sullivan

Bachelors Theses and Reports, 1928 - 1970

The electrolytic cleaning of metals by anodic methods has been known for many years. It was recognized long ago that when the temperature and concentration of the electro­lyte were properly regulated, bright clean surfaces were obtained.

A Preliminary Investigation Of Chromite, Lester C. Brown

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis was to study the effects of cryolite and a mixture of cryolite and aluminum oxide on a chromite concentrate with special reference to the ability to break the bond between the ferrous iron and chromic oxide in the chromite.

Glaciation In Montana, Alvin H. Lense

Bachelors Theses and Reports, 1928 - 1970

Glacial deposits are increasingly entering into consideration in engineering projects, soil surveys, ground-water supply, sources for industrial materials, and other economic enterprises. In the field of en­gineering, glacial deposits if present must be consider­ed in connection with reservoir sites, dam or bridge abutments, road building, and other types of construction work.

Distribution And Lithology Of Sedimentary Rocks In Montana And Adjacent Areas, Harold Kentta

Bachelors Theses and Reports, 1928 - 1970

The general features of the sedimentary rocks in a region, their distribution, and the relationships of these rocks to other rocks of the area and of adjacent areas, are some of the things in which most geologists are interested, for reasons of general curiosity or for obtaining a better understanding of their specific prob­lems

Geology Of A Kyanite Deposit Near Ennis, Montana, Clarence L. Nordstrom

Bachelors Theses and Reports, 1928 - 1970

A deposit of kyanite, an aluminum silicate mineral used in the ceramic industry, occurs in the low foothills of the Gravelly range about 10 miles south of Ennis, Montana. This study deals primarily with the character and origin of the deposit, and its relationship to the surrounding rocks.

Plan Of Development For Valley Gravity Project, Julius A. Krug, Michael W. Straus, Wesley R. Nelson

Lower Rio Grande Valley Curated Material

"The Valley Gravity Project Plan has been formulated to furnish an adequate and dependable irrigation water supply for fertile and productive area in the Lower Rio Grande Valley, Texas, It would also provide drainage works, which would remove the threat of destruction of the economy of the area due to effects of a high water table and salt accumulations. The project works would permit generation of the maximum practicable amount of electrical energy which otherwise would be required to operate irrigation pumping plants. Other incidental benefits include fish and wildlife conservation, recreation and flood control."

Project report no. 5-0619-0

The Construction And Use Of The Barrett Camera, Theresa Pauline Radermacher

Bachelors’ Theses

The study of the crystal structure of metals under various conditions of strain is at the present time the object of a great deal of scientific endeavor. A greater knowledge of the condition of strained crystals will be a tremendous aid in the future development of metallic construction for one can then predict the effect of any type of strain on a metal by the reaction of the individual crystals to that particular strain. It is the purpose of this paper to describe the construction and use of the Barrett camera which is used in experiments of this kind.

Value Of The Dispersion Scale On The Abbe Refractometer, Marilyn Jane Malewitz

Bachelors’ Theses

No abstract provided.

Chemical Products From Minnesota Peat, Willard P. Armstrong, Edgar L. Piret

Journal of the Minnesota Academy of Science

No abstract provided.

Back Matter

Journal of the Minnesota Academy of Science

No abstract provided.

The Preparation Of Certain Organic Chloroformates And Carbonates, Robert E. Brailsford

Theses and Dissertations

This brief discussion and research paper attempts to correlate a large portion of the information about the preparation of known organic chloroformates and carbonates, to point out the present and possible future uses of these compounds, and to contribute some information concerning the preparation of a number of the organic carbonates. A comparison of the different methods of preparation is made.

Laboratory Model Shaking Table; An Investigation Of Defects And Suggested Improvements, George C. Horak

Bachelors Theses and Reports, 1928 - 1970

The laboratory model is considered in this thesis. Information gained from this investigation has not been trans­ferred to the larger industrial machines. Some of the factors noted concerning the efficiency of the laboratory shaking table are inherent in this small scale model only.

Observations On The Nighttime Resting And Biting Habits Of Anopheline Mosquitoes In Ddt-Treated And-Untreated Buildings, Clarence M. Tarzwell, Frank W. Fisk

United States Environmental Protection Agency: Publications

Laboratory cage tests and controlled experiments in houses have clearly demonstrated that residual-spray deposits of DDT are lethal to mosquitoes for considerable periods. Although these tests valuable information on the durability of DDT residual deposits, they did not give information on the mortality of malaria mosquitoes naturally entering treated dwellings in search of a blood meal. In order to secure a lethal dose of DDT from residual deposits, mosquitoes must actually touch the material and be exposed to it for a considerable period. This period has been shown to vary (1), depending on the temperature, age of treatment, density and …

Insoluble Residues Of Five Sections Of The Amsden Formation, Wilmer R. Peterson

Bachelors Theses and Reports, 1928 - 1970

The term, "insoluble residue," as used in this report is that portion of the original rock sample remaining after the sample has been digested by a mixture of one part hydrocloric acid and two parts water. The remains or insoluble residue from this acid treatment may vary from nothing to I00 percent.

Water Levels And Artesian Pressure In Wells In Las Vegas Valley And In Other Valleys In Nevada, 1913-1945, T. W. Robinson, George B. Maxey, J. C. Fredericks, C. Harry Jameson

Publications (WR)

The rock formations of the earth are great natural reservoirs in which a part of the water derived from rain and snow is stored. Water levels and artesian pressure in wells register the stages of these natural reservoirs. The changes in water levels or artesian pressure are indicative of the depletion or replenishment of the natural reservoirs. Systematic and periodic measurements of water levels and artesian pressure in wells have been made in Nevada, by State and Federal agencies from time to time. However, only a few of these measurements have ever been published. Under the cooperative arrangement between the …

Test 383: John Deere G, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere G

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 382: Cockshutt Model 30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 390: Ellinwood Tiger Cat, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 389: Massey-Harris Model 44-Rt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …